Related
My 8525 came in yesterday and I've been playing with it. It's a neat phone, and there's still alot to be discovered.
I was wondering how you can transfer or read SMS that are stored on the sim card? Is there a way?
I'm 100% sure that there are SMS on the SIM.
If you have WM5 AKU3.0 or above you should be able to read sms stored on SIM directly from the sms inbox (a long overdue feature)
If you don't have AKU3.0 or above install "SIM Messaging"
This will read all the messages on your SIM
If you want to copy them to your device install "Dopod smsBackup"
Dopod smsBackup is recognized by SIM Messaging as an export option
"SIM Messaging" & "Dopod smsBackup" can be found on here by using search
or you can find both programs (bottom of page)on the link below
http://www.pdamagician.com/wm2003sewm5software.html
Thanks Mister B.
How do I go about executing these files? They don't seem to be supported.
justsignbythex said:
Thanks Mister B.
How do I go about executing these files? They don't seem to be supported.
Click to expand...
Click to collapse
Did you download them from the link above !
If so the simMessaging is a cab file (looks like a zip file) so copy it straight to your device (storage card is a good place to put it) via active sync. Use the inbuilt file explorer on your PPC to find the cab file & then run it & it will self install.
The Dopod smsBackup is in a zip file, you will need to unzip this first on your desktop then transfer the Dopod smsBackup.cab file (choice of 2, chinese or English translation) to you PPC as you did for sim Messaging.
If your device states they are unsigned you could try installing "certification off" this allows you to install unsigned apps, can be found on the site above under WM5 Specific software I think !!
I have used these on WM5 myself, let me know how you get on.
That worked! Thanks!
justsignbythex said:
That worked! Thanks!
Click to expand...
Click to collapse
I'm happy to here it worked for you.
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Here is my question. When I install new program using PC (through ActiveSync) it seems that ActiveSync will transfer CAB file (which is inside .exe) and then - install it as usual. So ... where will be those CAB files located and will they be deleted after installation if delete-cab-after-install feature is disabled ?
During TRANSFER ActiveSync does not ask .... "Do you want your CAB to be transferred to SD card or main memory", right ? It only asks during INSTALLATION of the CAB.
I make lots of installations using ActiveSync and would like to know if I'm not filling my valuable disk space (on phone itself) with junk CAB files.
bogdatov said:
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Here is my question. When I install new program using PC (through ActiveSync) it seems that ActiveSync will transfer CAB file (which is inside .exe) and then - install it as usual. So ... where will be those CAB files located and will they be deleted after installation if delete-cab-after-install feature is disabled ?
During TRANSFER ActiveSync does not ask .... "Do you want your CAB to be transferred to SD card or main memory", right ? It only asks during INSTALLATION of the CAB.
I make lots of installations using ActiveSync and would like to know if I'm not filling my valuable disk space (on phone itself) with junk CAB files.
Click to expand...
Click to collapse
I think that it stores them in the temp dir...which is deleted after soft reset
bogdatov said:
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Here is my question. When I install new program using PC (through ActiveSync) it seems that ActiveSync will transfer CAB file (which is inside .exe) and then - install it as usual. So ... where will be those CAB files located and will they be deleted after installation if delete-cab-after-install feature is disabled ?
During TRANSFER ActiveSync does not ask .... "Do you want your CAB to be transferred to SD card or main memory", right ? It only asks during INSTALLATION of the CAB.
I make lots of installations using ActiveSync and would like to know if I'm not filling my valuable disk space (on phone itself) with junk CAB files.
Click to expand...
Click to collapse
Thats why I prefer to extract the cab out of the C:\Programs\Activesync and copy them to SDcard. Pro: you have all needed programs on SDcard and do not have to install throu activesync.
bogdatov said:
As we know, by default when you install CAB it will get deleted after installation.
Some of cooked ROMs will disable this feature, so CAB will stay after installation. Which is OK for many people.
Click to expand...
Click to collapse
hi,but i have the same problem and i cant enable deleting the cab files after installation.i changed the registry HKLM/Software/Apps/Microsoft Application Installer to 2.but it still doesn't delete them!!plz help me.
hamed_ppc said:
hi,but i have the same problem and i cant enable deleting the cab files after installation.i changed the registry HKLM/Software/Apps/Microsoft Application Installer to 2.but it still doesn't delete them!!plz help me.
Click to expand...
Click to collapse
anybody dont know how i can solve this problem?i want cab files will be deleted after installation
hamed_ppc said:
anybody dont know how i can solve this problem?i want cab files will be deleted after installation
Click to expand...
Click to collapse
To enable or disable deleting CAB files after installing:
HKCR/cabfile/Shell/Open/Command/
default = \Windows\wceload.exe "%1"
\Windows\wceload.exe "%1" /nodelete
newbie2 said:
To enable or disable deleting CAB files after installing:
HKCR/cabfile/Shell/Open/Command/
default = \Windows\wceload.exe "%1"
\Windows\wceload.exe "%1" /nodelete
Click to expand...
Click to collapse
thanks a lot
papamopps said:
Thats why I prefer to extract the cab out of the C:\Programs\Activesync.
Click to expand...
Click to collapse
you have made my day! i never knew you could do that. i always had to look for cab versions untill now
papamopps said:
Thats why I prefer to extract the cab out of the C:\Programs\Activesync and copy them to SDcard. Pro: you have all needed programs on SDcard and do not have to install throu activesync.
Click to expand...
Click to collapse
Also if you make the files readonly you don't need to worry about making the registry change to stop them being deleted after installation.
bbobeckyj said:
you have made my day! i never knew you could do that. i always had to look for cab versions untill now
Click to expand...
Click to collapse
Thanks! I found it just one day when I had trouble with active sync.
Hi, I requested VOx ad2p from a vox user, but I can't copy them in windows folder, the error message says that the original files are in ROM, how do I unlock the ROM please?
http://forum.xda-developers.com/showthread.php?t=319326
Do you really need them? Internal drivers work IMHO pretty enough! Of course, after correcting of some registry keys
DO NOT USE THESE DLLS!!!
I have no ability to use A2DP now XR again...
If you need to remove this files, just rename it and reboot. After reboot delete renamed files.
ZlydenGL said:
DO NOT USE THESE DLLS!!!
I have no ability to use A2DP now XR again...
Click to expand...
Click to collapse
Did you use these files with the Wm6 alpha OS?
Lovetz said:
If you need to remove this files, just rename it and reboot. After reboot delete renamed files.
Click to expand...
Click to collapse
I can not rename these files, they are locked.
This procedure need only if you install files from VOX rom to your WM6 tornado device and they do not work.
You must rename these files directly on your smartphone. Do not use BB (big brother) for this procedure, and all will be fine.
ZlydenGL said:
Do you really need them? Internal drivers work IMHO pretty enough! Of course, after correcting of some registry keys
Click to expand...
Click to collapse
What ROM are you using? "Tornado Windows Mobile 6 ALPHA"?
Can you provide the registry settings? (export them with Resco Registry ,please)
I tried searching, found this thread:http://forum.xda-developers.com/showthread.php?t=310788&page=2 but it's not answering my question.
My Kaiser came with SPB GPRS Monitor and Sprite Backup. Both came as an installation disk (exe format) to be installed through a PC. Now, I'm looking at a way to make CAB for carrying both so that anytime I do a hard reset or reflash ROM, I can re-install both without using PC. Looking at the thread, I tried opening up the .exe and able to get the Cab files (there're 2, named 1 and 2 for each setup executable extracted), but copying the Cab and running it on my Kaiser won't work.
Is there any way? I try avoiding using 'cracked' cab apps .. I have it as bundled for the Kaiser, there should be a legit way for me to have it as cabs ..
There is a way.
run the installer from your PC. when the installation screen comes up asking you to choose between storage card and device, DONT CHOOSE. instead, run a file manager and search for the cab file. it usually goes either in windows/appmgr or in application data/volatile
What if in this case, it doesn't ask, it immediately says check your WM device, there's further instruction.
Second question: is the search done on the PC or the WM?
I'll definitely give it a try .. and thanks!
if u got activesync installed on your PC, run the exe files and find the .cab files on program files/microsoft activesync folder
semoga berhasil
Thank you. Terima Kasih Will give it a try
the cab file doesn't always appear on your PC.. but it does always appear on your PPC
look for it in your PDA when it tells you to look for further instructions..
WinRAR (rarlabs.com) is free and will extract most files from EXE installer archives. However, if WinRAR won't then UniversalExtractor will. You can search for it on google and download a demo.
THANK YOU
Thanks to all who has responded.
I managed to find the CAB files under PC's respective folders (Some are under Active Sync, some like Holux, created it's own folder). Tested some of the CABs found there and it worked. Now I'm a happy camper, got all of the CABS that I need (especially GPRS Monitor )
Last question:
the cab file doesn't always appear on your PC.. but it does always appear on your PPC
look for it in your PDA when it tells you to look for further instructions..
Click to expand...
Click to collapse
Under which folder I should be looking? I tried TEMP but it's empty (that's before I confirming the install process)
nir36 said:
There is a way.
run the installer from your PC. when the installation screen comes up asking you to choose between storage card and device, DONT CHOOSE. instead, run a file manager and search for the cab file. it usually goes either in windows/appmgr or in application data/volatile
Click to expand...
Click to collapse
I always do this to extract cab files from a exe installer and most of the time the cab file can be found at windows/appmgr/install
very useful and a serious time saver
Sticky or Wiki?
Thanks again for responses. I'm able to get what I need and believe this can be put as part of FAQ, Wiki or Sticky?
Sticky no.. but i will add it to the guides thread soon..
Hi everybody? I am trying to find a solution to a issue with sasimi on the new 6.5.X roms (with the start button on the lower bar). The issue is that sashimi cant install cabs to storage card. I searched the web and foud some ideas that u need to hack the sashimi.mrsc file but none of them was working.
Can anybody who succeeded in runing sashimi post his workoround? That would really help me. Thanks ion advance.
Nobody here uses sashimi?
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Man, I love you, thanks.
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
dagrim1 said:
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
Click to expand...
Click to collapse
no it will not working with 6.5, first backup SASHIMI.mscr original first for using later with 6.5
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
steveianson said:
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
Click to expand...
Click to collapse
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I'm so glad that it works again...
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Me too
It seems that the "SendSpecial ("Down")" is not working and the script may be hanging on the command, or something like that. You don't see the selection change, so it could also be the "SendSpecial("Space")" not working. Either way, the "SendSpecial("LeftSoft")" just after is obviously not firing. Not sure why it's different now, but it apparently is. There used to be a "SendSpecial("CR")" instead of the "SendSpecial("Space")", so I'll try that to see if it's working again (worked in win6.1, not in win6.5). Mine's been working just fine, up till the very latest Energy ROM on my CDMA TP2.
LightC said:
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Click to expand...
Click to collapse
I think it connected to the roms u are using. For me it worked with one rom, then I flashed other rom and I experencied the same thing as you.
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
secoseco said:
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
Click to expand...
Click to collapse
dingolino said:
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
Click to expand...
Click to collapse
You're right there off course
I am having no luck with the v8.0 of Sashimi. I have the Artemis ROM (WinMo v. 6.5.5).
Auto mode only installs cabs from cab/ASL folder. I replaced the Sashimi.mscr with the one posted in this thread but to no avail.
Do you guys have any suggestions?
me too,
sashimi doesnt install (not works) for new artemis v7. It install all my cabs from auto/SC to device becasue it can not move cursore down anymore..
any suggestions?
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
I'm surprised that either of the attachments on this thread works on HD2 Leo. I found that there is a very basic problem with mortscript and all sashimi scripts will hang. Two symptoms:
1) if not in flight mode, sometimes hangs during initialisation
2) if auto install to storage card, will hang (leaving you to select the radio button and press install)
and there is no easy cure.
padlad said:
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
Click to expand...
Click to collapse
thx m8,
i will try it
i'm on wm 6.5.x and sashimi stalls at SASHIMI INITIALIZATION COMPLETE.... HEEEEELP!