my sound output from wizard(o2 xda mini s) is alternating between between the phone speaker and a2dp stereo luetooth headset...so basically after pairing by bluetooth stereo headset...I can hear the sound for 10sec and then from the wizard speaker and then again from the headset..this keeps happening in a infinite loop!!!!!
It was working great before...but dont what happened to it suddenly :-(
anybody facing the same problem?? can somebody plz help me out...
It sounds like you're losing the conenction with the headset. Have you tried repalcing the batteries in the headset or completely draining it and then recharging?
Related
i have a XDA2i and a jabra 250v, when i turn on the headset the XDA responds by showing the headset icon, it also shows the icon showing sound is comming from the headset, and in the headset you can her a crackley sound. This is normal to me and has done it with other jabra headsets and also on the XDA2s.
But my point is today soon after turning on the headset in my ear i heard a reminder going off, so i started media player and played 10 mins of a film i had on my SD card, then a MP3 track, all with the audio comming from the headset not the XDA.
i had never tried this befor, as i stated it oftern shows the sound comming from headset icon, and a crackle is heard in my ear and i just quickley send and end a call and this disnonects the audio, but leaves the headset connected.
as this worked for audio is there a way to make it work properley ie you have the abilaty to turn the feature on and off
Thanks
John
Is this possible with o2 mini?
Anyone with o2 mini have got this experience?
Regards,
Arto.
For some odd reason, when i connect the headset from htc to listen to music, the speaker also outputs sound while the headset functions normally, in other words - both the headset and the speaker output sound, when the headset is disconnected, the speaker increases it's volume output - it's really annoying as i want only the headphones to output sound, can someone please help so that i can turn off the speaker sound? i don't think i experienced this before, either it's a loose connection on the headset or i turned on something by mistake.
p.s: i've checked the headset, it's connected properly and it's not loose.
can someone please help? thanks
nevermind, it's working fine now.
Wow, you are one lucky bandit.
Hi there!
I got my Trinity about 2 weeks ago and got I love that thing...she is so beautiful!
Yesterday I got a good deal on a Sony Ericsson HBH-DS200 Bluetooth Audio Device.
It connects via A2DP and then you can connect any std. 3,5mm jack headphone.
After I pair the devices everything works fine, handsfree and wirless stereo!
Now I disable Bluetooth and turn off the DS200 to shut it down.
Next time I restart Bluetooth and the DS200 it switches to Bluetooth Audio and all is well. But as soon as I try to play music it "skips" in 2-3 sec. jumps. This is as you can imagine not acceptable.
If I delete the conn. and repair it...it works again..up to the point where I turn it off and then on again.
Anybody have an idea?
thx!
pls search a2dpfix to sovel this bug.
but, it will make up to 90% cpu rate.
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
(Sorry i dident see this was wrong forum. Its a Tytn II i have)
If I am receiving a call, the phone will sound the ring, but when I answer it the speaker go dead. When I try to play music, no sound is produced (although if I plug in headphones I find that it is playing). I think that problem is in headset jac cause while i was cleaning it, headphones were enabling and disabling automatically. Is it any software solution for my problem (app or script to turn off headphones auto plugging in)?
Sorry for my english
do u got any symbol in the notification bar if the headset or a pair of headphones are plugged? there are two different smybols for headset and for headphones.
if i got you right, there should be a prob with the female audio jack in the phone. it does not recognize what typ of headphones (headset or plain headphones) are plugged
I just bought an S7 and i have a problem with my BT. Sometimes when i listen music on BT speaker, my sound is stuttering. I tested with 2 speakers. This is most frequent when i use my phone, like navigate, swiping in menu.. Is a software problem or a hardware fault?
I played music on BT like 2 3 hours, i keep my BT off, but in battery usage it shows 18 hours. (Screenshot: http://i63.tinypic.com/14xm14w.png )
I have the same problem when I connect to my car bluetooth. When it first connects the sound will stutter for 5-10 seconds, but then it will be ok once it stays connected.
I haven't had a chance to test with other speakers yet though.
Hasn't happened to me. Tested with a speaker and 2 Bluetooth headphones. Have yet to try out my car's Bluetooth though.
Take a look to my thread to see if it can help you.
http://forum.xda-developers.com/galaxy-s7/help/bluetooth-audio-streaming-stuttering-t3383217