Related
Hi,
I have a problem with my cruise, the phone went already 2 times to the operator for repair but the problem is still here, they juste made an Hard reset
When it sent it to SFR first time, it was very long to find the Network and trying a Wap session crashed the phone, connection failed and Calling was impossible,
So after the second time I decided to repair it myself...
I've made a HARDSPL to CIDUnlock on the phone, so now I Have WM 6.1 Rév : 1.28.405.1FRE
Then I UnSIMLocked with the tools from Olipro, that worked so I can now Use a Orange SIM in my SFR Cruise,
But the GSM module was still not Working correctly, so I flashed the Radio for version 1.58.25.14.
Now the network is found very quickly, as quick as when I had no problem with the phone, But one problem persists, I can use the GPRS but no 3G or HSDPA, this crashes complety like before, so at the moment I forbid connection to 3G with Manual Band selection in the phone parameters, so the phone doesn't look for any 3G / HSDPA Network.
How can I solve this, any solutions ?
Just installed ranjus rom with radio 1.18. Few questions...
1)it still comes up with the o2 splash screen when I turn on, and it asked me all the o2 question(it is originally an o2 xda exec). I wouldve thought installing a totally new rom wouldve wiped all this??
2) im now using my orange sim in it, but it won't connect to a 3G singal(it didn't do this before I put ranjus rom on it either)
O2 Extended Rom Customisations Are Probably Not Compatible With WM6.1
You Need To Flash The Extended Rom To Remove All The O2 Customisations.
Go Into Your Phone Options And Set The Band To Auto To Enable 3G/GPRS And Not Just GPRS. (GSM = GPRS & UMTS = 3G)
Download The HTC Network Settings Tool And It Will Configure Your Device With The Settings Required For Your Selected Network.
Hope That Solves Your Problems.
Regards,
OllieD
I tried to change the band from gsm to auto but it just goes back to gsm and greys all the boxes out! do I need to use that prog you gave the link to?
edit:think I got it to change the band to auto, still not on a 3g network but maybe I am outta range.
the device kept turning off like it was outta battery, but it said there was like 30% left, now im on mains power its workin ine.
can I flash th extended rom witout looisng all the settings and progs I've just loaded on?
I Believe So...
I Think You Can Just Make Sure Theirs No "radio_.nbf" (Radio Rom) Or "nk.nbf" (CE OS Rom) In The Flash Utility Folder.
Then Run The Flash Utility And Dont Perform A Hard Reset After Flashing.
It Should Then Only Update The Extended Rom. The Problem Is If You Have Already Let The Device Autoconfigure,
Alot Of The Crap From The Manufacturers Standard Rom Will Still Be Installed On Your Device.
The Best Way To Remove Would Be A Hard Reset But That Means Having To Reconfigure And Reinstall Etc.
Oh And To Answer Your Previous Question About The O2 Logo, Ranju's Rom Doesnt Flash That Area Of The Device Thus Leaving The O2 Logo Intact.
Their Are Ways To Customise This Logo If You Like.
Regards,
OllieD
I will have a tinker later on when im at home in front of my computer. Any idea why I can't get 3G reception? its enabled in the control panel.
So does anyone have any idea why I cant get 3G network reception? Im on radio 1.15 now.
For those of you who can get 3G reception...When you go to Settings>Phone>Network>(Network Selection) Manual...Does it show the regular networks (i.e 'Orange', 'O2 - UK' etc) AND the 3G network (i.e 'Orange 3G', 'O2 - UK 3G' etc)?
Sim Card Possibly.
No The Networks Are All Called The Same Its Just The Radio Bands Used To Connect Data Services That Differ.
Maybe Your SimCard Isnt A 3G Sim Or It Isnt 3G Enabled?
If The Sim Is Not A 3G Sim It Would Only Use GSM I Believe.
Regards,
OllieD
it is definstely a 3g card as it works in my other phone! does everyone get 3g reception on orange using a g3 o2xda with ranju rom and radio 1.15?
Isn't there ANYONE on orange in here??? I have had a look around and I think most of the Orange network runs on a 900MHz UMTS freqency. And it looks like the Uni only supports 1900MHz
UMTS on Ranju 7.7
I am on Orange, using Ranju 7.7 and radio 1.18. I had the same problem as you with the default Phone parameters, but I was able to change the band setting to "Auto" in the phone options. Thus GSM Band became "EGSM+DCS1800" and UMTS Band "UMTS 2100". And after a while the 3G icon appeared !
Universal bad for 3G
i can only say that universal has very bad 3g(UMTS connection) because when most other phones show 4 bars for 3g..my o2 exec only give 1 bar..but it is OK for 2g or GPRS...anyone agree??
Well I just flashed my voda v1640 with ranju v77 Rom, and shows good UMTS performance with italian "TIM" network, both for signal strength and for internet browsing.
the Radio is 1.14.10 (it should be the original one...)
Hi to All !
I tried a lot of Roms but up till now couldn´t find one
with 3G working ...
So I went back to my T-Mobile WM5 Rom.
Do you know one Mobile 6 Rom with working UMTS ?
Pease advise.
Best regards,
Karl
Pretty much every WM 6/6.1 ROM out there works with 3G/UMTS, perhaps you don't know how to activate it?
unless you are in the U.S. then you won't have any 3G , only GPRS, no matter what ROM you might have.
Sharpe1965 said:
I tried a lot of Roms but up till now couldn´t find one with 3G working ...
Click to expand...
Click to collapse
every WM 6/6.1 or 6.5 rom work with 3g if you have proper setting for it... if you are talking about 3G feature like videocall then none of therom except wm 5 works... if you are talking about 3G internet or other service then it should work flawlessly... try to install the setting cab for the operator and your country... the best way to get it would be getting it from t-mobile rom you got... there should be a cab file namely your operator in ext driver of the rom...
Hi !
Mysterious ....
My provider is Orange. So I took the T-Mobile Rom and changed the provider to Orange using the Network Wizard. 3G is working fine on this. I will simply stay with the WM5 Rom ... By the way ... We do have 3G here in Europe.
Best regards Karl
Go with any wm6, 6.1 or soon to be 6.5 rom and use the network wiz. I have been using it for years with no problems at all. Could it be a hardware problem??
gingerchristopher
gingerchristopher said:
Go with any wm6, 6.1 or soon to be 6.5 rom and use the network wiz. I have been using it for years with no problems at all. Could it be a hardware problem??
gingerchristopher
Click to expand...
Click to collapse
dont forget to put your phone on auto on phone settings
Some Tomal's ROMs doesn't work with 3G e.g. Tomal v.8.7 lacks this. The option was locked and my Qtek could receive only GSM1800.
Well I too live in Europe but I had such a problem if I used my old sim card I couldn't use 3g but with a new sim card I could. Soo try with another sim card maybe that will help. I use vodafone
bardaldeia said:
dont forget to put your phone on auto on phone settings
Click to expand...
Click to collapse
Thanks !
I am an idiot !
Everything is working fine now.
Best regards,
Karl
ASSHORN said:
Some Tomal's ROMs doesn't work with 3G e.g. Tomal v.8.7 lacks this. The option was locked and my Qtek could receive only GSM1800.
Click to expand...
Click to collapse
Wrong. All Tomal's ROMs support 3G, the option was not locked, but unavailable once you have a GPRS connection established. Disconnect and you will be able to switch to auto in settings. However, in some ROMs complete settings were available through phone options.
enigma1nz
OK, maybe my full-loaded with apps Qtek wasn't able to switch in auto mode due to some reasons. But still, thank you for information!
PS: I do appreciate Tomal's ROMs cooking and consider them a very good for Unis.
ASSHORN said:
enigma1nz
OK, maybe my full-loaded with apps Qtek wasn't able to switch in auto mode due to some reasons. But still, thank you for information!
PS: I do appreciate Tomal's ROMs cooking and consider them a very good for Unis.
Click to expand...
Click to collapse
It usually doesn't switch the Auto mode automatically, I always had to adjust it in settings, but the only reason the selection tab is greyed out when you go to do so it the active connection already established. Don't think it has anything to do with apps loaded. Try it next time, Tomal's ROMs are great. Would hate something as small as that ruin that impression for you
3G Icon disappeared
Hello guys,
Yes Enigma1nz
You are right. All Tomal's ROMs are great. I use Tomal's Rom always.
But here I can't see 3G icon on top bar. I have saved the proper configuration file for 3G settings from operator.
Here is my network & band settings:
Select your network type = Auto
GSM Band = Egsm+DCS1800
UMTS Band = UMTS 2100
Can you tell me how you are using 3G fine?
WCDMA
Legendpda said:
Hello guys,
Yes Enigma1nz
You are right. All Tomal's ROMs are great. I use Tomal's Rom always.
But here I can't see 3G icon on top bar. I have saved the proper configuration file for 3G settings from operator.
Here is my network & band settings:
Select your network type = Auto
GSM Band = Egsm+DCS1800
UMTS Band = UMTS 2100
Can you tell me how you are using 3G fine?
Click to expand...
Click to collapse
Enigma1nz
You were right. It was all about setting.
I have done it myselft by selecting network type to WCDMA. It was on Auto mode.
Now my UNI is showing 3G on tob bar.
Hi there.
I've a problem with my O1.
I've updated it to Gingerbread V20C stock and have a problem with the mobile internet connection.
My mobile operator is H3G italy. When there is no signal under H3G network it swap to another operator for roaming and the 3G connection drop. No problem till there, 'cos i disabled data roaming.
But when the H3G connection come back, it does not connect to internet. I've checked several times for apn parameters and they are ok, and it isn't a network problem for sure.
Any hint?
Sorry for my poor english, i hope you can understand my question as well...
3G problem with GingerLOL 1.5 (Vietnam)
Hi all,
I'm come from Vietnam. I met problem with 3G connection after install GingerLOL 1.5 ROM (http://forum.xda-developers.com/showthread.php?t=1118685).
Everything seems Ok except 3G connection.
Is there any one met the same problem ? If you knew solution for it, pls share it with me.
Thank you very much,
Hi all,
I am sorry, I have just found out the solution.
We should change APN setting, it can't detect it automatic.
In Vietnam, pls refer : tinhte.vn/thay-doi-nang-cap-firmware-280/p500-huong-dan-flash-rom-2-3-3-official-cua-lg-romania-root-753413
Other countries should take Mobile provider factor of your countries.
Thank you,
It's not a apn settings problem. My apn settings are ok and 3g connection work till the telephone lost h3g network and switch to other operator. When it come back to h3g i have the voice services but no 3g connection at all.
1) If you are not in roaming then turn off roaming, if you are in roaming then turn in on see it is working or not.
2) Just select on 2G from setting and check EDGE is working for you or not. If both the the things have same problem then talk to your ISP and confirm another phone has the same problem or you are only one who is facing this problem.
3) Some times your carrier change their APN without any notice so check they have same APN or not.
I'm sure it's not a network problem because other phones or the same phone with Froyo works with no problem at all.
With 2.3 i have 3g connection until i'm in a point where the default operator (H3G italy) have no signal so the telephone switch to the roaming operator. There the internet connection drop (i've disabled data connection while in roaming), but it's ok.
If the telephone switch again to the default operator i have no problem at all with voice services, but the 3G network connection don't come back until i reboot my O1. Other people have the same problem with the same device and the same version of android (lg stock rom) and the same operator (the only one that use roaming in italy).
I've had problems with my 3G connection too. Didn't go out of the country or anything, just turned on and turned off the 3G connection (data). Had to reboot every time it happens.
This seems a known bug with Gingerbread on P500 and h3g italy... Hope they fix soon....
Hi, I have same problem with data connection lost after return from national roaming in Slovakia (oprator O2). I have LG Optimus One with official gingerbread upgrade. Do you have some news about this problem? Thanks
Hi guys,
I normally am not a big responder or thread creator here.. Just a happy Photon Q user … but now I am looking for your help!
I own a Photon Q modded by CornholioGSM. Worked like a charm untill I got on a plane last week. (From Netherlands to Italy)..
When boarding I set the phone to flight mode.
Got off the plane and switched it back on, turned off flight mode. No longer acquiring connectivity to mobile network.
So.. went into Android testing (*#*#4636#*#*), turned Radio Off and set it to GSM Auto. Turned Radio back on.. still nothing.
Went into settings.. Mobile Networks > Network Mode was suddenly changed into “Global” and could not change it into anything else.
Factory Reset the device, again set it to GSM Auto and Network Mode was now changeable.
Set it to all kinds of different settings but it still won’t connect to a mobile network.
Everything else on the phone works fine except mobile networks. So no GSM, EDGE, 3G etc. WiFi does work.
The SIM card is also detected and eg. Whatsapp works fine too.
Does anyone know how to solve this?
Do I have to reconfigure the device or perhaps try a different ROM?
Any help will be greatly appreciated!
Grazie,
Steve McQueen
http://forum.xda-developers.com/showthread.php?t=1929143
Photon Q &/or Note 3 on ting.com
Thnx for your reply RBeavers!
I did consult the SIM MOD thread.. My issue is a bit different though.. My Q has no network connectivity anymore.. at all.
It doesn't drop sometimes and then reboot to fix.
Btw: Its running stock ROM. Might be worth to mention that
Hope someone can help!
Hmmm just installed CM 10.2 .. Set the band to 800/900/1800/1900 .. Set Phone testing to GSM Auto.
Mobile Networks to connectivity to GSM/WCDMA Preferred.
Still outta luck.
Can't think of anything else other than a wire has come loose.
Steve_McQueen said:
Hmmm just installed CM 10.2 .. Set the band to 800/900/1800/1900 .. Set Phone testing to GSM Auto.
Mobile Networks to connectivity to GSM/WCDMA Preferred.
Still outta luck.
Can't think of anything else other than a wire has come loose.
Click to expand...
Click to collapse
Maybe it's something like this?
http://forum.xda-developers.com/showthread.php?t=2454581
Also, getting radio log (as soon as possible after boot) could help to diagnose the issue:
Code:
adb logcat -b radio
Happy days!!
Got it working with CM10.2!! Fiddling around with it. Set band to Automatic, *#*#4636#*#* GSM Auto, Settings > Mobile Settings > Preferred Network Mode: GSM Only
And set Use Only 2G checkbox. Magic.
These settings in the stock ROM wouldn't work anymore.
Thread can be closed. Thnx everyone for reading and replying!