Related
I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.
me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??
bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers
Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks
Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly
The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD
Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.
Hi Everyone,
I had a strange thing happen to me in the car the other day and I was wondering if anyone had any views on it. As my phone linked up to the cars BT hands free kit the radio cut out as if I was making a call.
To get the radio on I had to turn BT off on the phone.
Interestingly enough when this happened I had Audio manager running. And right enough I played a track and it came out on the cars speakers. This would be quite useful only I havent managed to repeat it yet.
Certainly I get a bit of music in the 'gaps' when I make a call if audio manager is running but that is it.
Cheers,
Andy
!!! come on guys !!!! someone give me some feedback !!!
BUMP
Anyone ? Please ...
i believe theres is a program called bttoggle or btcicle, which routes audio to bluetooth on running it, i use it to route audio thru my bt headset once in a while, a simple search for bttoggle or something like that should sort it, i wonder if i can upload it here... mods if this file is not allowed please delete...
oh the way i use it is i just kept those files on my storage card and put a shortcut for the btaudiotoggle in the programs folder...thats it..click to turn on audio to bluetooth, click again to turn off..
You might want to check if your Wizard is paired with the car BT using A2DP in addition to handsfree mode. If so, that could explain it -- to fix it, just turn off the A2DP pairing on the Wizard, then re-establish the connection when you want to use the Wizard as an audio player.
No A2DP
Nah just a parrot hands free kit in the car. just wanted to be able to play through it as well as making phone calls.
Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing
Hi! I have a brand new Jabra 620s bluetooth-headset. When I turn the headset on and search for bluetooth devices on my computer I can see it, but I cant see it when I search for it on my touch pro.
What could be the problem here?
I had a similar problem last night (and have it quite often when i need to pair). It doesn't detect it until the 3rd or 4th time in which last night it didn't even detect it either. I power cycled the headset and my phone found it the first time.
Yeah, I tried rebooting my headset and my phone several times, but I still can't get it to work...
Figured it out... Had to hold in a button on the headsett to make it avaliable for new devices...
But new problem:
I don't get sound in the headsett when I play music. But when I make a call the sound is in the headsett. What could be the problem here?
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
nyckid211 said:
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
Click to expand...
Click to collapse
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
slogum said:
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
Click to expand...
Click to collapse
You can use Advanced Config to enlarge the bluetooth bitpool under the bluetooth tweaks. Set it to "very high" for best sound quality (uses more system resources tough).
HTH
Maximum bit-pool setting is 1561. I dont think it solves the problem, cause the quality is still really bad.
Any other tips? Or do I have to return the headset cause a brand new ~1000$ phone cant play on a wireless bluetooth headset?!
Bump.. Are there really no solutions?
I have bluetooth enabled handsfree in my car. Whenever I make a phone call the sound is routed through the car speakers and there's a microphone in my car...
My question is: is there a way to route music from my ppc to my car? I tried a lot of softwares (VJ Volubilis, BlueTooth Audio...) I think its routing to my car (on the ppc it says that its routed and I stop hearing the music), but nothing comes out of my car speakers...
(calling works fine)
any solutions, or is it a hardware thing thats missing in my car?
Thanks!!!!
Not sure if this will work but it is worth a shot (I'll try it myself later on)
http://forum.xda-developers.com/showthread.php?t=393309
Which phone and music software are you using. (so we can help troubleshoot)
I use this and it works fine for me.
BtMusic 1.0 beta4 works GREAT..
http://maxmobilesoft.com/downloads
nir36 said:
BtMusic 1.0 beta4 works GREAT..
http://maxmobilesoft.com/downloads
Click to expand...
Click to collapse
Hey nir,
I went to the site and register but the program seems to be out of the beta 4 stage (it says it expired in October). Is yours still working? If it is, can you post the cab? Thanks.
oh.. maybe it's working because it was already installed on my device for a while.
mine works fine.. it's the same cab on the website.
thanks everyone!!
Well I tried them all and it seems its always the same problem... it connects to my car and the sound disappears from my ppc, but nothing comes out from my car.. on BTmusic it gives:
Status: enabled
Headset: connected
A2DP: off
And I tried everything to turn A2DP on.. but it always stays off (menu -> A2DP) , is that the problem?
I feel that my car recognizes only when a phone call comes in, but fro some reason is not transmitting the music from my ppc.
I have a 2006 BMW 525xi with idrive, my ppc is a tmobile wing, and i tried both s2p and the default music player.
In your bluetooth Partnership settings - Click Start, Settings, Connections, Bluetooth and and click on your car's bluetooth, Does it show both Wireless Stereo and Handsfree (are both boxes checked) if not make sure that Wireless stereo is checked) should work if it is. If you do not see wireless stereo and only handsfree - then you will not be able to stream music because your car's bluetooth is not able to stream the music, only calls. My new car's UConnect Bluetooth does not support wireless music streaming, only calls. But in my other car I have the Motorola T505 which can stream both Calls, (handsfree) and Music (Wireless stereo). In partnership settings I see only Handsfree and serial port for Uconnect and my Motorola shows both Handsfree and Wireless stereo. You may be out of luck trying to transmit music if you do not see Wireless stereo in the partnership settings (your car's bluetooth may not support it. If you see the (Wireless Stereo in partnership settings but it is not checked, then check it off and start enjoying wireless bluetooth music streaming.
thanks ...
that's what i thought also.. no i dont have wireless stereo option, i only have the handsfree...
I will ask this knowing that most likely the answer is "no":
anyway to fool the bluetooth to stream music through handsfree?
salahnajm said:
thanks ...
that's what i thought also.. no i dont have wireless stereo option, i only have the handsfree...
I will ask this knowing that most likely the answer is "no":
anyway to fool the bluetooth to stream music through handsfree?
Click to expand...
Click to collapse
There might be a way, but I don't know how to myself. I don't know if the sound quality would be any good - Mono Vs. Stereo Sound Plus pitch no Base etc.. If so, you will probably want to explore other Options - MOTO T505 I use is great - If you have AUX jack - you can use that - There are other bluetooth devices as well capable. Good luck. If I see or hear anything else I will reply back to this tread or PM you
i've tried BTMusic 1 beta but when i try to start the program it says that i need .NET CF, but i do have NET CF 3.5 ! is that a rom issue or i need an earlier version of NET CF ? Somebody else with the same problem ?
Th3Hunter said:
i've tried BTMusic 1 beta but when i try to start the program it says that i need .NET CF, but i do have NET CF 3.5 ! is that a rom issue or i need an earlier version of NET CF ? Somebody else with the same problem ?
Click to expand...
Click to collapse
It is a newer verson - Google it and download and install on your device. You probably only have version 2.0. It is easily found in this XDA site - Various Links - and on microsoft's web site
if anyone is still interested in this problem check out my comments here:
http://community.giffgaff.com/t5/Le...ing-audio-and-music-to-Hands-Free/td-p/506915