Related
I was at my local Best Buy today looking at phone accessories when I came across this case and holster for the Nexus One. As I looked closer at it, it looked very similar to the Seidio case and holster, only it was branded Platinum. Upon further inspection, I noticed on the bottom of the packaging in small letters that it was indeed a Seidio product. What really surprised me though was that it was only $10, instead of $35 like the other cases and holsters around it, so I snatched it up right then and there.
Since all the other Platinum brand case/holster were still full price, I can only assume that they are discontinuing this in the stores. I looked on their website and it's still listed for $35. So if you've been looking to get this case and holster, I'd suggest you hit your local Best Buy and hope they still have them in stock before their gone.
I got the same one from the local best buy by me. Solid case and holster for $10. Well made and has all the needed openings for microphones, ports, ect. Phone fits face in or face out in the holster.
Appears to be a rebranded Siedo Innocase™ II Surface Combo - Black which retails for $50 on the Siedo website.
Only problem is (like other cases) you have to remove it to fit it into the desk/car dock. Still a good value.
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
bskim23 said:
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
Click to expand...
Click to collapse
I don't use a screen protector myself, I've had the case on and off a handful of times since I got it and it doesn't appear to be scratching the screen. I do agree though that the little rubber pieces on the inside do tend to move around a bit, but I've found that if you squeeze the case in as you slide it onto and off the phone, it minimizes the chances of the rubber moving.
Overall, I've always been very happy with Seidio's holster clips, but have to have a case on my phone cause I've very tough on phones, so I'd say the Innocase is perfect.
Now I just need to rig up a way to use the phone in the official car and home dock without having to remove the phone from the case. Gonna have to whip out the Dremel tool, soldering iron and some wood. If I get really ambitious, I may even cast some plastic molds of the phone.
Thanks for the heads up on the case. I went to my local best buy and they did not have it on display. I had to ask one of the cellphone associates to get it for me out of the back. Their SKU is: 9943421 for $9.99 regular price $34.99.
I've been using the Case-Mate tough case exclusively since I purchased the phone in March. All I can say is I'm amazed at how thin this case is. It feels as if there really is no cover on the phone. The addition of a secure belt clip is a HUGE plus in my book. My only gripe so far is I don't think this case will do much good in protecting the phone from a drop out of your pocket or coat.
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
garfnodie said:
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
Click to expand...
Click to collapse
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
No joy at my local best buy - but I found an open-package one on Ebay for $7.99 with free shipping - same item.
Open package is no big deal to me though...
Thanks for opening my eyes to this product!
just got this as my seido case was getting really messed up.
the only difference i see is that the inside is rubber rather than seido's felt interior
krazichinaman said:
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
Click to expand...
Click to collapse
Sound's to me like what you need is the Seidio rugged case. It's similar to the Tough case in that you get a thick rubber wrap with a plastic shell around it, and then that fit's into a special spring holster.
http://www.seidioonline.com/product-p/bd4-hkr4hnx1.htm
I'm sticking with the regular case/holster as that will more than protect the phone from even a tall drop.
Right now I have a Otterbox Commuter Series for my Desire its a good slim case for protection but sometimes I wanna switch yo something a little more stylish. Does anyone have any suggestions? If so leave a link to where I can find the case.
HTC Desire
This is what i use in conjunction with a martin fields screen protector.
http://www.gelaskins.com/store/skins/phones/HTC_Desire/Hulk_SMASH
Works brilliantly and stops the phone from being a black brick
I use a case that simply covers the back, edges and corners. It's hard to describe and I can't post an outside link to show, but it basically hugs the edges and corners of the phone, so that it only covers the sides and back.
Mine's crystal clear (I have a decal on my battery cover that I like to be able to see), and these protect the edges and corners without being too bulky. My clear one also provides protection for the decal.
Go custom - get a Casemate slim case and add some stickers / decals to it. I got a few Android stickers from ebay and added them to a Casemate.
JokerNJ said:
Go custom - get a Casemate slim case and add some stickers / decals to it. I got a few Android stickers from ebay and added them to a Casemate.
Click to expand...
Click to collapse
Totally agree. This case saved my desire 3 times already (hopefully it didnt fall on the screen side, thanks to the weight difference of the upper part of the phone ).
I've had my desire for over a year now. When I first bought it, I searched ebay for a gel case and some screen protectors. The Gel case only covers the sides and back. The protectors were stuck on and did their job until they were too scratched. Then they inhibit the touch screen function - I noticed this when the screen protectors were so badly scratched it was becomming difficult to see the screen. Since I'm too cheap to buy another £2 batch lot of protectors I've left it off for about 3 months now. There is not a single scratch on the screen.
Also the gel case has provided a very good protection for the rest of the phone. The gel case was shipped from Hong Kong and cost around £5 including shipping. A colleague even found one cheaper. I don't know how they make stuff so cheap over there but the phone is as good as the day it came out of the box.
Just ordered a custom skin from Skinit. It won't offer the amount of protection as my Otterbox but it will stop it from scratching up and add some customization to my device.
Sent from my PB99400 using XDA App
I had a flip leather case but it was a bit inconvenient having to open the cover all the time even though it protected the screen so I got different one similar to the ones people use a lot on iPhones, it covers the back and sides but leaves the screen free. I got them on eBay cos it's cheap and there are LOADS to choose from!
i got the PDair leather case, 18.99 on ebay, works great.
I use the htc mobile case:
http://www.amazon.co.uk/HTC-Mobile-...HCO6/ref=sr_1_1?ie=UTF8&qid=1308353984&sr=8-1
Simple, cheap and good.
MatDrOiD said:
I use the htc mobile case:
http://www.amazon.co.uk/HTC-Mobile-...HCO6/ref=sr_1_1?ie=UTF8&qid=1308353984&sr=8-1
Simple, cheap and good.
Click to expand...
Click to collapse
I was hoping to get a leather case with my phone. Reason why I thought I would is because when I get the touch diamond a few years ago, that came with a case. Shame really
Meaple said:
I was hoping to get a leather case with my phone. Reason why I thought I would is because when I get the touch diamond a few years ago, that came with a case. Shame really
Click to expand...
Click to collapse
I second this. Nokia issued pouches with E66 too. Especially since I don't consider price of this plus shipping costs dirt cheap either.
i used a black back cover meshed bought on netimes.com. On this site I bought also an android neoprene pouch
I have been use the Casemate barely there - which is a great case. But it doesnt protect the top of the phone along where the power button is.
I tend to stick my phone in my pocket and I think my keys over time have scraped the top a bit, with tiny nicks out of phone.
But it has saved my phone a couple of times when I dropped it!
I'm also using Casemate Barely There, real happy with it. A friend of mine has the Casemate Tough Case, it's a bit thicker but does offer a bit more protection.
http://www.case-mate.com/HTC-Desire-Cases/HTC-Desire-Cases.asp
hwchouse said:
I would recommend Melkco HTC Desire leather case from Amazon. It's stylish designed and protects well of the entire phone with genuine cowhide leather flip cover as well as the hard leather back cover without blocking the ports, camera. I bought one from them and am very satisfied with the quality and the look.
Click to expand...
Click to collapse
I bought a Jaka Melko too... so SOPHISTICATED (all hand made)! And very protective. I drop from waist height last week, no scratch at all, phone and leather.
Plus, I have a hard gel case, and the Melkco is exactly the same size, no bulk.
Maybe a little bit expensive (28~30 USD free shipping), but worth all pennies, and it really smells leather when opening box.
I just ordered the body glove case online but having second thoughts after seeing pictures of the case-mate tough case. I'm more worried about dropping my phone since I think the body glove would just dismantle and crack itself if I drop my phone. With the case-mate, it looks more protected since the rubber is enclosed with a harder external casing. Can you guys post pictures if you could of the two cases, and what your experience been like using each one of the cases if you bought one.
Thanks!
PS: the body glove case I'm talking about is the snap on with the rubber back and shiny front.
Crap just posted wrong section. Move on guys.
Sorry
m918v said:
I just ordered the body glove case online but having second thoughts after seeing pictures of the case-mate tough case. I'm more worried about dropping my phone since I think the body glove would just dismantle and crack itself if I drop my phone. With the case-mate, it looks more protected since the rubber is enclosed with a harder external casing. Can you guys post pictures if you could of the two cases, and what your experience been like using each one of the cases if you bought one.
Thanks!
PS: the body glove case I'm talking about is the snap on with the rubber back and shiny front.
Click to expand...
Click to collapse
as for pics u can go to any seller online it shows the pics but i have the body glove one(i dont use the belt clip so it gives the option to insert plain back piece to make it smooth) heard through the grapevine though that these body glove ones were not being sold anymore due to not fitting right?! mine fits pretty snug but been using since day one had no probs and i did drop it on concrete from my lap while getting out of car didnt snap apart and didnt do any harm to phone.
*but i did order the case-mate tough case which i think is better, but i already had a drop with body glove with no probs either?!?!
ok thanks. if you haven't bought the case-mate, there's a -10 off code I saw at the accessories thread if you buy it from their retail online.
I'm still considering which case to choose after having sensation for 1 month
Currently im thinking either Capdase flip leather or Case Mate Touch/Barely There
Capdase look cool, but i doesnt really like flip leather and it may look big n thick
For casemate, it just cover the back panel & sideway, but screen is unprotected(eventhough I have screen protector)
I afraid if i put in my pocket with keys or coins or hit something when i walking
any suggestion?
http://forum.xda-developers.com/showthread.php?t=1257779
If putting your phone in your pocket, I suggest a cover of some sort. Screen protectors can only protect so much.
phra09 said:
I'm still considering which case to choose after having sensation for 1 month
Currently im thinking either Capdase flip leather or Case Mate Touch/Barely There
Capdase look cool, but i doesnt really like flip leather and it may look big n thick
For casemate, it just cover the back panel & sideway, but screen is unprotected(eventhough I have screen protector)
I afraid if i put in my pocket with keys or coins or hit something when i walking
any suggestion?
Click to expand...
Click to collapse
http://tpu-cases.com/index.php?main_page=index&cPath=25&zenid=e623bac81c6347ae0deb1bb40cb4229f
Ive had everything from otterbox cases, seidio cases, and some **** t-mobile ones they throw in. These TPU cases seem to hold up just as good if not better than most, also they dont seem to show wear which is nice. My seidio incase looked like **** after a few months of use and i paid $35 for it shipped vs. $8 for the TPU. All the leather cases look nice for about 2 weeks but with pocket use they noticeably wear and are bulkyyy.
As far as putting in your pocket with keys i wouldn't risk it but my roommate has a sensation and he keeps his in his pocket with his car keys. He has a TPU on it and NO screen protector, hes got a little to much faith in the Gorilla Glass on our phones, only marks hes gotten is around the speaker theres some small scratches from keys.
Best combo ive found is to get a TPU and find a store near by that will professionally install a Zagg or another top brand screen protector. Woodfeild mall by me has a stand that installs Zagg sheilds and ive used them since my G1 days. They arent 100% scratch proof like they all claim to be tho, meaning the screen protector can scratch over time but the important thing your PHONE wont get the scratch. Also Zagg and others similar to them have life long warranties anytime the protector looks a little worn or anything you get a free one to install yourself or its $5 for them to professionally install it. Comes out to around $23 bucks for both and ur phone will be well protected. If your really clumbsy and tend to drop **** i would recommend getting an otterbox commuter case, they add a little bulk but better protection vs. TPU. Only thing with cases like Otterbox's is they have exposed rubber so us pocket users tend to end up with lint alll over the exterior of our cases.
edit: didnt mean for this to be so long just popped a couple addys for class and am in over achiever mode lol hope this helps
Ive just ordered: a black armour case, some 3m di-noc to wrap it and a zagg screen protector all for under £20 !($30)
Will report back with pics soon in a new thread
I've got a case-mate barely there (the white flavor) and a Martin Fields screen protector.
Thanks a lot
Well would you go for cover type (eg case-mate) or flip leather type ?
I bought 3 different cases for my HTC Sensation, 2 Case-Mate and one a relatively unknown brand Momax. Links below.
As for Momax, i bought it on eBay for USD$11.99 and i must say i am happy with the purchase. The TPU is thinner than the Case-Mate Gelli Case and there's holes which didn't show up on the Case-Mate. It fits the Sensation nicely and most of the time i am using the Momax case compared to the other 2 Case-Mate cases.
As i am a user who have not posted anything before, i am not allowed to post the URL for Momax casing. Do a search at eBay for ioomobile.
I found my cheap silicone case works really well, even with the phone residing in my pocket most of the time (No screen protector)
Do find I clean my screen most nights as it does get dirty throughout the day
Got it from amazon uk for £2.00 (Cant find the actual product though)
Loving my smoke grey TPU case. Highly recommended.
Sent from my HTC Sensation
+1 for the TPU case. I've got the black one and it really ads very minimal bulk with a lot more peace of mind for protection.
I've got this Incipio case and I LOVE it. It's a TPU style, with a matte finish so it's not tacky in your pocket nor does it get oily/fingerprints. I also pushed my phone off of my desk the other day and it landed square on its face. The case lip kept the screen from getting f**ked.
http://www.myincipio.com/HTC-Sensat...-Sensation-NGP-Semi-Rigid-Soft-Shell-Case.asp
I'm using this case: http://www.amazon.com/gp/product/B005A2UR4W
And I love it ! It's nice
I am also using the incipio case and I gotta say it is awesome
Sent from my HTC Sensation Z710e using XDA App
Which case/film to use with official Samsung charging back?
It is thicker, and so far I can see nothing that will fit, can anyone shed some light on this please?
Looking to buy this:
http://www.ebay.co.uk/itm/171051427935?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I used a Spigen Neo-hybrid (bulged) but fit fine, as well as a Tech 21 Impact shell case.
ponts said:
I used a Spigen Neo-hybrid (bulged) but fit fine, as well as a Tech 21 Impact shell case.
Click to expand...
Click to collapse
mate thats awesome news
can you post some pics with the neo hybrid please?
winwiz said:
mate thats awesome news
can you post some pics with the neo hybrid please?
Click to expand...
Click to collapse
I would but I sold it a few days ago when I went from two S4's down to one lol. I thought it looked good even with a hump out the back.
Has anyone tried the official Samsung wireless charging back cover with the UAG case?
ponts said:
I used a Spigen Neo-hybrid (bulged) but fit fine, as well as a Tech 21 Impact shell case.
Click to expand...
Click to collapse
I tried it bulged but it seems to effect the flash in pictures.
I tried out all the cases I could today at Best Buy with my S4 and S Charging battery cover, and NONE of them would work - they kind of started to go on, then would slide off on the long sides of the phone.... I was thinking about a Ghost Armor cover or cutting my own protective cover for it, debating on whether I will do it out of XPEL Invisible Paint Protection film (the stuff you use to protect the paint on cars) or 3M 1080 Carbon Fiber vinyl since there really isn't any other option, but I'm still not sure I want to do either one of those film options, here's why:
The clear bra paint protection film will make it stick in my pocket and add a ton of lint build up to the trimmed edges all the way around the battery cover, and the carbon fiber film (I have it in white and black currently) will change the texture of the back cover, something I preferred in the past but have become accustomed to since I bought my S4 and have used it without a case since launch day!
Let's keep this conversation going but not just with CASES, but film or other forms of protection in mind as well!
KryptosXLayer2 said:
I tried out all the cases I could today at Best Buy with my S4 and S Charging battery cover, and NONE of them would work - they kind of started to go on, then would slide off on the long sides of the phone.... I was thinking about a Ghost Armor cover or cutting my own protective cover for it, debating on whether I will do it out of XPEL Invisible Paint Protection film (the stuff you use to protect the paint on cars) or 3M 1080 Carbon Fiber vinyl since there really isn't any other option, but I'm still not sure I want to do either one of those film options, here's why:
The clear bra paint protection film will make it stick in my pocket and add a ton of lint build up to the trimmed edges all the way around the battery cover, and the carbon fiber film (I have it in white and black currently) will change the texture of the back cover, something I preferred in the past but have become accustomed to since I bought my S4 and have used it without a case since launch day!
Let's keep this conversation going but not just with CASES, but film or other forms of protection in mind as well!
Click to expand...
Click to collapse
So far it appears the the Diztronic TPU case fits.
I'll be getting mine today (the charge that is) so will try with the Neo Hybrid SGP case and ill post some pics
I have both the diztronic and neo hybrid case, and only the diztronic works well.
Sent from my SGH-M919 using xda premium