Database Info

o2 xda II

hello you guys
first of all may i say what a great help you guys have been in the past. but i messed up. i updated to another rom this dir had a ms.nbf file in it. previously when i rebooted i had an o2 logo. then after this flash i had a qtek logo. but the software itself was extremely slow. and it did not seem to clear my previous setup as i now had two of each icon. reflashing with one of rom i found here and then i had three icons of each. and suddenly i had an imate bootup splash screen. where is all this info stored and how can i clean all these roms and start fresh with one of c_shekhar's roms. i understand the the radio part and the the wm5 part but the rest is confusing. please help
wikcus

this part of the flash guide
10. Now you have to hard reset your device.
Press simultaneously: Reset Button + CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(to select items use Record Button, to change values use Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
should delete the storage of the former rom

perfect it worked like a charm. thank you very much Rudegar. much appreciated. i have another problem still. my memory card is not working at all. it does not see it at all. im using C_ShekharAKU3.5b.R40.P24_public rom and the operating system is perfect other than the fact that my memory card does not work. but if i slide it in with the 2577 dir on it it installs the probrams perfectly. im confused it can access it but does not alow me to go there.
thank you for the help
wickus

sorry to mess you around but now it works. im fine. thank you anyway your prompt help is greatly appreciated.
thank you
wickus

BT switches off
I have this constant problem for quite some time... and dunno wat to do :-(. Apparently when I put my phone for charging, it switches off the BT after a while... and am using a BT headset as well... this happens even when iam on a call... and eventually the call gets transferred to the handset, but I cannot hear anything from my handset either... i need to disconnect the call and then continue... :-(. any work arounds... and watz the coz of the problem?
another thing... some time it shows that I have multiple storage cards... there are images of the same storage card in the explorer... think I had seed a max of 4 images at once... any idea watz the prob and huv to fix it?
thanks in advance...

Serious help needed

hi all.
I am in serious trouble and i need help. i realized i did not have outlook, thus my contacts are all gone.
I had tried to update my software earlier by installing some .cab file. It was a file for my HTC home. The installation was 'successful', however after i did a reset ( they prompt me to ) i could not boot up my phone. It get hanged once it got to my wallpaper, and i cant tap or press anything. The htc home screen also does not come out.
=(
any kind souls?

So something is hanging right after windows boots... did you try to install HTC Home to a storage card? Try booting with the storage card out.

thanks for the prompt reply. i tried, however it never seems to work. I am using a HTC TYTN ii. running on windows 6.1
I did install it on a storage card. i tried means like switching on without memory card, sim card and did a million resets, but it doesnt seem to work.. =(
Actually i install the HTC Home was because the message counter on the HTC Home got screwed up. it showed 1 unread no although i had all messages read. but anyway, for now, tht's not my main concern.. =(
thanks all in advance ..

I guess I do not understand all of your issues besides the freezing at boot.
A hard reset should be an option, if you're ok with that... and then for the future, use sprite and pim backup to make sure you don't lose too much data.
Try searching the forum for threads like http://forum.xda-developers.com/showthread.php?t=320689
What caused you to lose your contacts?

my contacts are all saved in the phone, and it wasnt back up cause i am not using microsoft outlook.. and lets say i want to do a hard reset, how to do it?
and how do i do a soft reset with my phone.

Is there anyway that i can actually do a SAFE mode boot up? but my phone keeps getting hanged at start up. i dunno if its because it cant bring up a pin enter mode where I need to key in my pin each time i boot up.

0) What version of ROM were you using?
HTC TYTN ii
1) Applications installed when it happened
HTC HOME (old version ) i d/led and used HTC Diamond home, then it got screwed up cause the unread messages kept showing 1, although all messages were read. i thus wanted to reinstall the HTC home.
2) Radio ROM version (2.19.21, 2.47.21, etc...)
NONE
3) Device model (dopod 818, imate etc...)
HTC TYTN II
4) Device version (G3 or G4)
Windows 6.1?
5) How long it was since last hard reset (1 day,6 hours, etc..)
I never did a hard reset. how do i do it
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
Soft refers to poking the reset button, would be more than 20 times after this issue
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
more than 10 times.
8) any other significant info you think will help:
My contacts are not saved syn with my com as i do not have windows outlook.
9) Do you have the HTC Homeplug today plugin enabled?
10) have you populated your PIM apps via pimbackup or via activesync?
11) Do you have the "HTC_default" today theme enabled?
yes.
for now, i cant boot up. the screen will hang at my wallpaper. i cant seem to press or click anything after that. My pin start up prompt does not apear too. please help =(
depressed ivy.

Sorry, but I'm pretty sure you need an app to use safe mode. You might need to loose your contacts, but don't give up... research and you might find an answer.
http://wiki.xda-developers.com/index.php?pagename=The%20Safe%20Mode%20Bible
And if you've already tried booting without a sim and storage card, you might need to hard reset, which is easy enough after reading the wiki.
e.g. press both softkeys while resetting, or you could even flash a new rom via sd card by naming the .nbh file KAISIMG.nbh and putting it on your storage card root directory.
Read the wiki before you make any decisions and good luck, good news is your phone sounds like it's fine, just install a safe mode program next time.

Hi. I did research like wht you adviced, i managed to log into bootloader mode, i downloaded MTTY program and got my phone to the USB mode. I like to ask the following:
1) can i retrieve and save my contacts as i saved them all in my phone and none in my sim card?
2) Wht can i do next as I'm badly stuck at the HTC home page with only my wallpaper, i cant click on any buttons.
Thanks in advance to all.

I really hope that some GURUs here are able to help solve my terrible situation and i would really appreciate it. My contacts are all save in the phone and i need some help in retrieving it.
Thanks all.

asdfgh123 said:
I really hope that some GURUs here are able to help solve my terrible situation and i would really appreciate it. My contacts are all save in the phone and i need some help in retrieving it.
Thanks all.
Click to expand...
Click to collapse
At what exactly point does it freeze?
What is your radio version, it should appear after you turn on the device in red letters on the bottom right.
What is your SPL Version, you should be able to see it from the bootloader?
Dave

Hello friend. When I suggested research, I meant things like this...
http://forum.xda-developers.com/showthread.php?p=2732337
I found this thread by clicking search in the top right to use google, and typed "save contacts" which if you've gone into MTTY research (be careful by the way) then you might be able to backup your data.

MY SPL : 3.29.0000
MY radio: 1.65.16.25
When i boot up, i suppose to have some password protect, to enter my pin before there is reception and stuff. For now, I can only see my wallpaper, the start button, contacts and calander buttons.However i cant touch on anything, it just simply hangs there.
SIM card and memory card are off. I tried SYNC, but it says cannot detect device.
=((

asdfgh123 said:
MY SPL : 3.29.0000
MY radio: 1.65.16.25
When i boot up, i suppose to have some password protect, to enter my pin before there is reception and stuff. For now, I can only see my wallpaper, the start button, contacts and calander buttons.However i cant touch on anything, it just simply hangs there.
SIM card and memory card are off. I tried SYNC, but it says cannot detect device.
=((
Click to expand...
Click to collapse
By "SYNC" you mean active sync? Try an Actice sync re-install, maybe?
Sounds like this protect stuff is beggared.
Ta
Dave

i meant active sync, it says it cant detect my device. Is there anyway from MTTY, i cant retrieve my contacts?

All this actually happen after i installed .cab file the other day, and the installation was fine and i was prompt to restart. It hanged after that till date. sigh =( I'm desperate.

GURUs,
I cant get my device to go any further than hanging right at the wallpaper of HTC Home, the usb doenst recognize my device, so i cant enter or do any thing.
I just wish to retrieve my contacts now, and do a hard reset on my phone.
Thanks.

If you never saved your contacts from and to your sim card without any kind of backup from outlook or pim, etc. you might be ****e out of luck. Gone from a ****ty samsung to a equally ****ty razr, hermes, and now kaiser with the same sim...Always copy your contacts to the sim; or at least a Backup folder on your desktop or lap. flashing erases the main memory, which of course includes contacts. That's why we have a program called sim manager, to backup contacts everytime we erase our systems. Hope you find a workaround though, as a former Iphone owner, reinputting your contacts is a giant *****

sigh.. does tht means i'm so dead now? I did ever did a PPCPimBackup, but its stored in the phone memory too? any sort of help you can assist?

asdfgh123 said:
sigh.. does tht means i'm so dead now? I did ever did a PPCPimBackup, but its stored in the phone memory too? any sort of help you can assist?
Click to expand...
Click to collapse
Possibly, I've tried to get hold of someone who might know, but it's looking grim.
Storage Card backups and Active Sync are the best way to backup.
*DaveShaw closes barn door after the horse has bolted *
Ta
DAve

Cannot HardSPL Treo 750

Hi. Looks like Treo 750 forums are almost dead nowadays. But if someone can point me out in the right direction I'll really appreciate it.
I have a Treo 750, it came with WM5, I updated it to WM6 around a year ago. I did an official update, the one we were able to get from the Palm website. I've been very unhappy with it lately. Even after some hard resets, the thing is just slow sometimes, and I would just like to try one of those cooked ROM and see if I can get a some performance improvement, small or not.
So, I found this rom: http://forum.xda-developers.com/showthread.php?t=345748
The thread was posted a long time ago so it might be old. If you can point out to newer and/or better cooked/lite roms, thanks .
So, anyway, first step according to everyone is to install HardSPL. And this is as far as I can go. I'm using CheetahUnlocker.exe found in these boards. I put my treo in bootloader mode, then run CheetahUnlocker. Start step 1. But when it is trying to the update, where you see the progress bar, it goes straight to 100%, and then it fails with an error message 207, saying that the image is corrupted. The Treo itself reboots back to the OS.
I've been reading and reading for hours and I haven't been able to do this. I even follow some steps regarding Vista drivers, but that didn't work either. I tried it in XP at work and it didn't work. I always get the same error. I'm seriously lost and I would really like to try a lite ROM.
Is there any other way I can try to install hard spl? Can it be installed via the SD card method. Also, I could just go ahead and install the cooked rom via the SD card method but I wouldn't like to risk my phone that way.
When I reset my phone with the Media button pressed, first I get the tri-color screen for less than 1 sec, then I get a gray window with blue letters that says "Loading" for a few secs, and then I'm back to the try color screen that says:
"Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000"
Any ideas? Please I really need help.

No one? I really need help flashing the HardSPL. I thought about trying to install the hardspl via SD, but I read it wouldn't work. Any ideas?

hi, do you format the SD in FAT32 and 512 bytes in your PC??? you must do this before copy de cheeimg.nbh file to SD.

not sure if this is too late but mine was doing the same thing. I switched to a lower capacity SD card and it worked fine. 2GB or less.

I have the same problem, just the 3 collor screen...nothing else. Any ideas??? Please...

bricked roger's magic, desp for help.

Well, I finally did it yet still not rooted and stuch at rogers screen have read alln the threads anbd oddly some fastboot cmds work other sdo not very new to all of this and righly nervous now. have the rogers magic which is htc branded yet aftewr reformatting sd card like many times before it says no image file. how exactly maybe dumb question do i get the images to my sd card so they work. any help greatly appreciated and trying to flash the daldroid image for want an htc rom. thx, kevin
the simpler the method the better for right now everything on the phone is completely gone and i have no os.

A bit difficult to understand you.
It seems to me that you're panicking at this point. Unfortunately, that makes it very hard to follow what you're talking about. I just picked up my magic today, I've been experiencing some problems as well. I'd be happy to work with you to find answers to your problems, as well as my own.
I'll be putting a new rom on my phone as soon as I have figured out how to do it properly. In the meantime, calm down and try hard resetting your phone to see if that helps.
What does your phone do when you turn it on? HTC magic screen, then a freeze? If you get that far, try removing your battery, putting it back in, pressing and holding back and home buttons together, and pressing power (end call) button for a moment to turn it on. Remember to hold the home and back buttons until the recovery screen comes up.
It'll ask you if you want to clear memory, you select yes (action), let it finish (only a moment or two), and then restart your phone.
I hope that helps.
Caid.
444
[edit] go here and follow these steps in every detail. You need to do this to correctly modify your android device.
http://android-dls.com/wiki/index.php?title=Magic_Rooting
This means you'll need to download the sdk and a bunch of other things. There are a lot of steps involved in modifying your phone (ie: using custom roms and such) but it's all documented pretty well in many different posts. Don't let it overwhelm you, just do it one step at a time. From what I gather, doing these sorts of things is much easier on a winmo phone, so if you're just looking for an easy method, unfortunately, there is no quick method. But, again, it's all documented in a step by step manner, so take it a step at a time. Another thing to remember is, you're doing these things for your first (or second) time, so it will only get easier in time.
Good luck.
444.

Caid444 said:
It seems to me that you're panicking at this point. Unfortunately, that makes it very hard to follow what you're talking about. I just picked up my magic today, I've been experiencing some problems as well. I'd be happy to work with you to find answers to your problems, as well as my own.
I'll be putting a new rom on my phone as soon as I have figured out how to do it properly. In the meantime, calm down and try hard resetting your phone to see if that helps.
What does your phone do when you turn it on? HTC magic screen, then a freeze? If you get that far, try removing your battery, putting it back in, pressing and holding back and home buttons together, and pressing power (end call) button for a moment to turn it on. Remember to hold the home and back buttons until the recovery screen comes up.
It'll ask you if you want to clear memory, you select yes (action), let it finish (only a moment or two), and then restart your phone.
I hope that helps.
Caid.
444
[edit] go here and follow these steps in every detail. You need to do this to correctly modify your android device.
http://android-dls.com/wiki/index.php?title=Magic_Rooting
This means you'll need to download the sdk and a bunch of other things. There are a lot of steps involved in modifying your phone (ie: using custom roms and such) but it's all documented pretty well in many different posts. Don't let it overwhelm you, just do it one step at a time. From what I gather, doing these sorts of things is much easier on a winmo phone, so if you're just looking for an easy method, unfortunately, there is no quick method. But, again, it's all documented in a step by step manner, so take it a step at a time. Another thing to remember is, you're doing these things for your first (or second) time, so it will only get easier in time.
Good luck.
444.
Click to expand...
Click to collapse
Thanks truly and your right however I have read all of this documentation and others many times but to no avail. Specifically, the main issue I am having is I have literally transferred all of the appropriate files to my device prob 50 plus times, no lie, and every time I get no image file. If I knew how to do this correctly everything should work fine. Yes, I tried your temp fix and am stuck at the roger's screen after boot up with bright red fastboot usb on the top left of the screen. Thanks and hope this helps to help me. Kevin

http://www.howardforums.com/showthread.php?t=1545226
Anything in this thread able to help?

skittleguy said:
http://www.howardforums.com/showthread.php?t=1545226
Anything in this thread able to help?
Click to expand...
Click to collapse
No, but thanks for trying to help. How exactly is my direct question do you properly place as they said in droid speak the system and image file at the root of your sd card? I know maybe a dumb question yet this is how close I am to flashing correctly and there are no other files on my m.s.d., have reformatted several times, and transferred these 2 files correctly I had thought yet it always says no image file when I press the volume down button??? How can they not be at the root of my storage card when there is nothing else on there? I am very frustrated and right now have a $625.00 htc-rogers magic brick and to me this should be the easiest part. Thanks, Kevin

I don't understand why you are trying to put them on your sd card? You can restore from fastboot if your can a) boot into fastboot and b) have the proper engineering spl installed. Then, it's a matter of going to the command line and
fastboot flash
ing your system and data.
Unless you can't get into fastboot?

skittleguy said:
I don't understand why you are trying to put them on your sd card? You can restore from fastboot if your can a) boot into fastboot and b) have the proper engineering spl installed. Then, it's a matter of going to the command line and
fastboot flash
ing your system and data.
Unless you can't get into fastboot?
Click to expand...
Click to collapse
Yes, I quess I understand now yet if you read through most of the stuff here it says as mentioned before to place these files/images on your sd card so the directions are not clear to some of us. Anyhow, I greatly appreciate your help and I do have fastboot and adb working properly and thought I had finally successfully flashed my device 30 min ago, yes for the first time and I was in shock I saw the screen in fastboot with all of the options, yet at the last step it failed so I am trying again. i.e. restore complete I think yet when I slected the option to reboot system it was still stuck on the roger's start screen. Any ideas? Kevin

I've come to the conclusion that flashing the magic is a very sketchy process. And I mean sketchy at best. It seems there's a really high failure rate.
there are many guides on how to do it, but it seems the people who wrote them, forgot to add some steps to the whole thing, and these are the kind of steps which make any newcomers more liable to incorectly flash their phones.
Where's the Magic wiki? I'd be happy to help add to it in any way I can, but it seems that this forum is in definite need of tutorials which can hold the hands of newcomers. Something that's written to be understood without a shadow of a doubt.
I will be getting my magic replacement tomorrow, if there're any long time players here who've got the whole root\flash\update process down pat, I'd love to chat with you on msn, to do these processes step by step, and I'll gladly write it all down in very great detail.
I'd like to help others avoid the same confusion so many users (including myself) are experiencing.
PM me if you're interested.
Caid.
444

G1 root failure and not connecting to google at start up

Hi, first of all thank you for taking the time for looking at this post.
Ok, so I attempted to root my g1. I downgraded to some 29 or something like that. (Alt L and Alt S some cupcake update from theunlockr). After it was done updating, I got a rainbow screen with Serial0. I ignored it and turned it off by removing the battery. Then I did some other update where I turned the phone on to recovery mode. After that, I turned it on, and I tried connecting to Google so I could continue on to the steps, but after many hours of trying, it would keep saying there was no network connection, (although, I do have a network plan, and before I tried rooting it, I could always connect no problem.) Also, at the top left, I could see 3g and Edge network symbols alternating, but it still wouldn't work.
I need help ASAP please. It would be greatly appreciated.
Thank you very much, and sorry for wasting your time with this question.
P.S. I did format to Fat32

Rouxillo said:
Hi, first of all thank you for taking the time for looking at this post.
Ok, so I attempted to root my g1. I downgraded to some 29 or something like that. (Alt L and Alt S some cupcake update from theunlockr). After it was done updating, I got a rainbow screen with Serial0. I ignored it and turned it off by removing the battery. Then I did some other update where I turned the phone on to recovery mode. After that, I turned it on, and I tried connecting to Google so I could continue on to the steps, but after many hours of trying, it would keep saying there was no network connection, (although, I do have a network plan, and before I tried rooting it, I could always connect no problem.) Also, at the top left, I could see 3g and Edge network symbols alternating, but it still wouldn't work.
I need help ASAP please. It would be greatly appreciated.
Thank you very much, and sorry for wasting your time with this question.
P.S. I did format to Fat32
Click to expand...
Click to collapse
Mine did that at first, if it says serial0 that means it cannot find DREAIMG.nbh, try formatting the card to fat 32 in your computer first, once it finds the file it goes through an install. Also caps matters so make sure its exactly as I have it typed there also make sure it on the root of the card not in a folder or anything.

Double posting is not allowed.
Also, this is not development related and thus does not belong in the development forum.