Related
Hi all,
I've a problem and I'm really not able to find out a solution.
I've, in my office, a wireless connection that works for my laptop.
I'm actually posting here using the wireless connection....
For reasons I don't understand, it doesn't work for my HTC S710.
The ssid is not broadcasted, so even with my laptop I had to manually configure it, and it immediately worked flawlessly.
I did the same on the phone. I inserted the SSID (it contains a dot in the name, should this make any difference), the network type (Internet), the authentication type (WPA-PSK) and the encryption (TKIP), the network key and index (1).
Tried both saying that the network is hidden or not.
The problem I've is that the network now appears in the WIFI page (list of connections) but it seems not reachable (has the red X on top). If I choose to "connect", it does nothing.
Another strange thing I noticed, is that in the last page of the "new WIFI connection wizard" it's automatically checked the IEEE 802.1x control, even if the manually deselect it, the next time I check it is checked again. This is not true on my laptop, where the "authentication tab" in the network properties is grayed out (and not selected, btw).
Just to complete the description, the phone works correctly in my home network (where the SSID is broadcasted and the authentication type is WEP).
Can anyone help here?
Sorry for the length of the post...
Regards,
AleM2k.
alem2k5 said:
Hi all,
I've a problem and I'm really not able to find out a solution.
I've, in my office, a wireless connection that works for my laptop.
I'm actually posting here using the wireless connection....
For reasons I don't understand, it doesn't work for my HTC S710.
The ssid is not broadcasted, so even with my laptop I had to manually configure it, and it immediately worked flawlessly.
I did the same on the phone. I inserted the SSID (it contains a dot in the name, should this make any difference), the network type (Internet), the authentication type (WPA-PSK) and the encryption (TKIP), the network key and index (1).
Tried both saying that the network is hidden or not.
The problem I've is that the network now appears in the WIFI page (list of connections) but it seems not reachable (has the red X on top). If I choose to "connect", it does nothing.
Another strange thing I noticed, is that in the last page of the "new WIFI connection wizard" it's automatically checked the IEEE 802.1x control, even if the manually deselect it, the next time I check it is checked again. This is not true on my laptop, where the "authentication tab" in the network properties is grayed out (and not selected, btw).
Just to complete the description, the phone works correctly in my home network (where the SSID is broadcasted and the authentication type is WEP).
Can anyone help here?
Sorry for the length of the post...
Regards,
AleM2k.
Click to expand...
Click to collapse
MAC filter?
don't think so, since I first connected to this network with my laptop a week ago and it worked from the beginning.
Ten minutes later I started trying with the vox and it never worked.
What I mean is, the admins didn't have any info about my laptop...
Thanks,
AleM2k.
I have exactly the same problem with my HTC S710... If I disable SSID broadcast in my Linksys router my HTC S710 is unable to connect.
With SSID broadcast on it works just fine... I hope we will get a fix for this in the next update.
My TouchPro can connect normally to unsecured wifi networks, but with WPA encrypted ones, it can only connect for the first time, after that it can not.
At home I have a wireless router/ADSL modem (Zoom X6) that is connected to my PC by cable, all my phones and laptops connect to internet via wifi. While other phones (1G iPhone) and laptops always connect successfully, the TP only connected once and then cannot or unable connect to the WPA security-enabled wireless network (although it's able to scan and detect the availability of the Wifi network). I tried to reset the router settings, even update router firmware, but no luck, it's still unable connect. I also tried with my office secured wifi network and I had the same problem.
Yesterday, I had to hardreset my TP and tried to connect once again, but problem was repeated, connected only once and after that, unable. Note that my previous PPC (TMobile Ameo WM5) didn't have any problem with the same wifi router and the same wifi settings (as follow).
My TP wifi settings:
Network Name: MyNetwork
Connects To: The Internet
Uncheck "This is a hidden network"
Next step:
Authentification: WPA-PSK
Data Encryption: TKIP
Greyed Out: The key is automatically provided
Network Key:************** (my pass)
Greyed Out: Key Index: 1
Next,
Checked "Use IEEE 802.1x network access control" but greyed (I can't change this)
Anybody know the solution for this issue?
Thanks and very appreciated for any help.
i experienced similar problems with my old p4350 but not yet with the TP...
no solution, sorry. but im quite unhappy that this issue still exists...
Any suggestion, pls.
yeah.. quite sucky.. I though the WiFi 'broke'.. but i was able to connect to a WEP site.. I think its something to do with WPA.
I never had this problem with my Diamond. The firmware on Diamond isso much more stable compared to Touch Pro..
I set everything to WEP and my key is open instead of shared, and now it works fine.
I had issues at my dad's, who has no encryption, and also there, when I set the key to open io shared, I got connection. (even though there is no key
anyway, it looks like that is the bug (at least in my device)
I have exactly same settings and same problem... but I want to use this encrypted connection since in future I will have to connect also in other places where I need it for sure.
Any help here?
I have similar promblem with my Hermes before.
My wireless router is running "Turbo-G" mode, my Hermes can't connect it with Turbo-G mode On.
After I change the wirless mode from Turbo-G to "g/b", my Hermes can connect it without any problem.
I tryed that and does not work...
strange is that is was working in the past and on router I did no changes but on TP I installed just some apps which should not affect this...
Only what could affect is Advanced config which I installed...
So where else can be problem?
How can I troubleshoot this?
Signal kvality is good but still keeps dropping and does not obtain IP from router.
mine works fine...not that that helps you in any way
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
hung_ng said:
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
Click to expand...
Click to collapse
You are merely restricting people from connecting to your router.. without encryption, you are sending unsecure packets all over..
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
I tried the PT using unsecured routers, WEP and WPA and all of them worked fine with stable connectivity.
The routers I have tried (without any problems) so far are:
1. Linksys WRT-54G running Tomato firmware
2. Linksys WRT-54G running DD-WRT firmware
3. D-Link DIR-655 running latest firmware
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues...
I am not using a custom ROM.
I hope this helps in some miniscule way.
Good luck.
Minus-1 said:
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
....
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues....
Click to expand...
Click to collapse
I was about to say the same thing...
Not having any issues with my girlfriends WPA secured router. It's on WPA2-PSK and AES encryption. Enter key first time (case sensitive!!), and of you go... Connecting without trouble ever since
hmm..Funny mine still can't connect to my home WPA2, AES or TKIP.. I'm on the Buffalo Tomato firmware..
WIFI not connecting
This solution worked for me!! Excellent. This was a right pain!
thedino said:
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
Click to expand...
Click to collapse
I've got the sollution, everybody on this forum probably has advance config installed, the program sets some default value's of it's own, set the WPA authentication under network in the advance config program to disabled and it will work again. Anyways, that worked for me
I've removed WiFi settings and then I edited settings again. It works now
Raphael Wifi problems
I bought this Fuze to replace my trusty Dash since I broke the antenna on my Dash. I'm running NRG Magic, but have tried other NATF and other ROMs as well, I cannot get this phone to connect to my wifi network I'm using WPA2-PSK but have disabled security for testing. My Dash and my laptop connect immediately with no problems. If I cannot get wifi going on this Fuze I'm afraid I'll have to put it on Ebay and try the Iphone, which people seem to love.
The Fuze did connect once, and it was WPA2-PSK at the time, I don't remember what ROM I was using at the time probably an NRG flavor, but Ihave had _no_ luck since.
Should I flash to 'official' ROM? Honestly I'm getting tired of playing with this thing I don't have the time.
Any help would be appreciated.
Thanks,
Marc
I may have found something
Check your time zone/daylight savings settings on your router. Phone and router time must be in sync.
Anyone else having trouble with wifi? I have a connection to my home network and have used the 10 digit hex wep key. Even in the same room as the router (Linksys/Cisco), the signal strength is only about 50% and I can't even open a page in Opera.
SSID shows correctly
Mode: Infrastructure
Tx Rate: 54Mbps
RX Rate: 1 Mbps <-- is this the issue?
Channel 1
Advanced status shows: Associated to network.
Any ideas?
hopper13 said:
Anyone else having trouble with wifi? I have a connection to my home network and have used the 10 digit hex wep key. Even in the same room as the router (Linksys/Cisco), the signal strength is only about 50% and I can't even open a page in Opera.
SSID shows correctly
Mode: Infrastructure
Tx Rate: 54Mbps
RX Rate: 1 Mbps <-- is this the issue?
Channel 1
Advanced status shows: Associated to network.
Any ideas?
Click to expand...
Click to collapse
Bump
A call to HTC yielded nothing. I'm at my wits-end. Just turning wifi makes it almost impossible to load a website, I do better with just my marginal 3G service even though the wifi shows connected. Do you think a hard reset might help??
hopper13 said:
Bump
A call to HTC yielded nothing. I'm at my wits-end. Just turning wifi makes it almost impossible to load a website, I do better with just my marginal 3G service even though the wifi shows connected. Do you think a hard reset might help??
Click to expand...
Click to collapse
I'd also reset the wireless router too. Another possibility is there might be compatibility issues between the router and fuze. what router do you use? i'm using a linksys router and it's working fine. Obviously the signal the phone gets isn't as good as my Thinkpad's signal, but it does the job fine. I'm really enjoying this 3G speed, so I don't really use wifi that much - saves power!
only wifi problem i had was when i put in my wep key it rejected it the first time, and when i made it reconnect everything was fine. but at first it said my network was unavail.
Okay, try this - it's what worked for me:
Go to Settings -> Connections -> Wireless LAN.
On the bottom, choose the Power Mode tab.
Move the slider all the way over to Best Performance.
Fixed me right up.
FuzzyLogic_FC said:
Okay, try this - it's what worked for me:
Go to Settings -> Connections -> Wireless LAN.
On the bottom, choose the Power Mode tab.
Move the slider all the way over to Best Performance.
Fixed me right up.
Click to expand...
Click to collapse
yea that worked for me....but this is gonna drain the battery alot quicker right? whay wont it work the other way?
FuzzyLogic_FC said:
Okay, try this - it's what worked for me:
Go to Settings -> Connections -> Wireless LAN.
On the bottom, choose the Power Mode tab.
Move the slider all the way over to Best Performance.
Fixed me right up.
Click to expand...
Click to collapse
I found that in a windows mobile support forum as a stated solution for anothe HTC project and tried it also, it worked!
Thanks!
I'm having problems connecting to a WPA encrypted router and it's driving me crazy.
It just hangs and hangs and hangs, but never connects. If I put in an incorrect pass, or bad info- it immediately will fail to connect, but with the correct info- it will continue to attempt to connect, but never finish.
I've changed it to "Best Performance" but that made no difference.
^ Happened to me also. Turned out that I didn't add the Fuze's MAC address to my router's allowed devices list in wireless security.
I'm having the same problems as OP. I'm using the Fuze straight out from the box and I've tried adjusting the power settings as suggested and still no luck. I've also hard resetted to no avail. Any help is appreciated, thanks.
I don't have any issues with my wireless network, but I don't use an WPA encrypted router.
I have mine set to MAC address, and it work without issues.
I have a WEP encrypted router and it shows that I am connected. Do I need to set something up in settings -> connection -> connection? All I have are Media Net and "Work" listed. Seems like no one else is having this problem =/
I'm having a similar problem with my phone. I set my phone to maximum signal and the battery is just taking a hit. I can barely get a signal although it does work. I can't get the "free" ringtone to download off of their website, but no big loss. Wondering if the 3G/Edge would be a better bet.
Im also having a problem connecting to my network. it shows that im connected but doesnt now connect to the internet in internet explorer and other online apps. ive tryed...
restarting the router.
hard reset.
changing the power settings to high performance.
disabled hidden proxy as suggested on another thread.
exchanged my phone after being suggested by htc.
im using a linksys router. is it a compatibility issue?
this is driving me crazy; why are so many people having this problem?
I dont know if this goes here, but reading your problems, I think mine is a little different.
Where I live, in Mexico, almost everyone has internet service with the same Isp, who gives 2wire dlsmodem/routers with only a 10 digits wep encription (for default), the problem I have is that whenever I try to connect to any router (I've only tried with these) it asks for the wep key, but no matter what I put it always says that is incorrect. I tried disabling the encription and IT DOES work, but I dont control the other routers wich I want to connect to..
Any Ideas?
I am having the exact same problem. I could connect to an unsecured hotspot but can not connect to my WEP protected linksys/cisco router. It appears that linksys/cisco seems to keep popping up in this thread from folks having problem. Out of curiosity what model number of linksys/cisco do you have? Has anyone figured out a solution yet?
Go to configure wireless networks than go to the network adapters tab, click the first one IEEE 802.11 bg .... and make sure its set to user server assigned IP address.
Same problem here! tx @ 54 mbps rx @ 1mbps, and it doesn't change therefore i'm getting about 5meters distance before my connection becomes unstable (WTF). Using WPA2-PSK and set to performance.
P.S. all router incompatible comments are incorrect. There's a spec for .11 b/g and all hardware should be using this therefore it should work it's either a hardware fault or some settings aren't working correctly. BTW for me it's the same prob whether changing the ROM or radio, it doesn't change...
Same problem...never resolved? Fuze $200
http://forum.xda-developers.com/showpost.php?p=4213175&postcount=19
Solution
I may have a solution, it worked for me on 3 routers so far and dramatically increased reception over distance and connection stability.
Open your WiFi router settings, go to advanced settings and look for something like Beacon Period. If I got it right, this is the interval between position updates and default setting should be 100.
If you lower this number, it will update your devices position more accurately and get you better stability.
Be warned it will probably marginally increase AP radiation and decrease bandwidth of the wifi connection by a percent or two, however I didn't notice any difference but a huge stability increase.
I am using Beacon Period 50 at home but anything from 50-75 works for me.
Enjoy
I can't seem to connect to my work network that is using WPA-PSK security. Anyone seen this problem before. I've double and triple checked my key and my laptop works fine.
I have no issue. I have WPA-PSK at home. It works fine
tried any other network?
try toggling aes vs tkip and otehr small settings like that. it's got to be a small setting that you're overlooking. i've used encryption on multiple wpa-psk networks and they've worked flawlessly as long as the settings were entered correctly. try again!
Have you got MAC address filtering turned on? No amount of times trying to connect, even with the correct key will give you access if that feature is turned on.
funny... I just got the same problem on the same day...
I used WPA-PSK for a long time untill the day. My TP just couldn't connect to my access point. Another laptop works normally with this.
I've tried without WPA-PSK. It was normal.
Yes, I've tried to re-setting WEP-PSK or check at MAC filter already
Trey setting the time to the time on your router as it sounds to me at the time is different as WPA is a temporal keying system time is a factor and sounds outside the maximum driff
have issues sometimes less after i changed to wpa-AES instead which is also more secure
but one thing I found fixed the issue was to power off the router for 10sec and plug it in again so think some routers get dizzy but too many reconnects by the same device
as I had the same issue with my ipod touch but never with laptops and desktops using wifi
I'm not sure if this is the same problem I had before but..
I used to have a problem connecting to my university's wireless internet. It was protected with WPA too (not sure about PSK part). What I found was if you keep pressing the connect button really quickly, it'll eventually connect after a few tries...
There's a chance that it the wireless router that you're trying to connect to. I remember in the past some firmwares weren't compatible with certain devices (cant remember where I read that).
I have the same problem connecting to a wpa-psk network at a friend's house, but works perfectly fine on my home wpa-psk network. No filtering or any special settings on either network. You should try another network to see if it works.
Also, strangely enough, if I enable wpa authentication in the Advanced Configuration app, it doesnt work. So I have that disabled.
try reboot your router and maybe everything back to normal. I have the same problem and even worth my laptop couldn't connect to the Internet.
I don't know if there is a timeout for encryption setting .
My problem was resolved. Not sure if this will work with your TP. I found this solution somewhere here. Thanks to them.
Go to "Advanced config" program (if you don't have it, u can find it somewhere here)
then under "Network"
set "WPA authentication" to DISABLE
Maybe I have changed it by accidental before.
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Hi Pirate
it's a bit depending on the ROM you have installed - but since Android 4 you have a quite reliable setting. The default behavior of Android devices is to deactivate the wifi connection when it goes to sleep.
Some ROMs don't recognize the disconnection and the switch/button still shows "Wifi on" although disconnected.
First step: go to settings / wifi settings, hit the menu button (top right three dots) and check the advanced settings.
Somewhat like "Keep WLAN active in standby" - set this to always.
That should solve it already under android 4.x
If this doesn't help, look into Play Store - search for "wifi keep alive". But for the SGT 2 you shouldn't need it
Greetz - Chris
It was already set to "Always" so I don't think that will help. I will look at that app to see what it does.
Sent from my Nexus 7 using Tapatalk HD
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
guncrasher said:
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
Click to expand...
Click to collapse
The problem is that it never comes back on. Well it shows the wifi icon and the signal and everything but it just doesn't have any data connection. Any apps that use data act like wifi is off. The only way to get it to start working again is to toggle wifi or reboot. I also forgot to mention it is the stock ROM, only rooted. It got the OTA a few days ago too and it has happened since then.
You're not alone
Skurvy_Pirate said:
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Click to expand...
Click to collapse
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
I know this isn't super helpful but I had the same bug you describe on the previous version of carbon. When I updated to the latest it seems to have stopped.
Sent from my GT-p5113 using xda premium
I had similar issue with my aTab Phone 4 and TP-Link TL-WR941ND (OpenWRT)
After disabling WMM capability in the router the problem disappeared!
Change router lease time to "2weeks"
Sent from my GT-I8190N using XDA Premium 4 mobile app
Same issue.
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
Same issue. also using connectify and also tried all things you have described. If you find any solution please let me know.
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
No option for static IP in connectify
jopsinas said:
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
Click to expand...
Click to collapse
There is no option in connectify for static IP and in USB wifi dongle also there is no option to set static IP.
Help!
---
---
Same issue
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
1. I have had the exact same issue for (atleast) the past 2 years. Have survived by repeatedly turning wifi on and off.
2. I too use connectify. This issue doesnt seem to happen on every wifi connection (just like your case). Even more specifically, it seems to happen ONLY when I connect my phone to the hotspot created via my laptop (connectify).
3. Even when the internet is actually working, some apps do not seem to recognise that(take some time to realize it is working), while others are able to connect instantly. Specifially, whatsapp is unable to send/receive messages for about 1-2 mins, after which I receive a whole bunch of messages at once.
This does not seem to be an issue due to connectify as well. I have tried creating a hotspot from my laptop without using connectify as well, but unfortunately, nothing changed. Further, this does not happen when my phone connects to a hotspot created via connectify by some other pc. The wifi and internet work perfectly fine when connected to a hotspot created via my friends computer.
Further, this problem happens only when a mobile connects to the hotspot. Doesn't occur when another laptop/PC connects (not sure about tablets).
I have looked into every nook and cranny on the internet, explored every forum for any working solution, but have been unsuccessful. In fact, this is the first place where I saw the exact same problem as mine, and was wondering if you have found any solution to it .
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
I'm having the exact same prob on my ZTE Grand x V 970
It started when i had kitkat and i couldnt even "fix it" restarting the wifi, i had to reset the phone in order to have my wifi work for like 2-5 mins and then stops recieving data, tried to reconnect and stays on turning on wifi.. Now i changed to the stock Rom and the problem is still there but at least now i can "fix it" restarting the wifi connection until certain point.
Issue sharing internet with Connectify from PC
Go to:
Control Panel\Network and Internet\Network and Sharing Center
On the left column, click on CHANGE ADAPTER SETTINGS.
You should be in: Control Panel\Network and Internet\Network Connections by now.
Then click on: Microsoft Virtual Miniport Adapter and click on Properties, then click on the 'Configure' button in the 'Networking' tab. From this window, go to the 'Power Management' tab and uncheck 'Allow the computer to turn off this device to save power'.
This works for me. Try this out
If this doesn't work further, you can try out mHotspot for the same purpose.
I've had the same issue, with the wifi saying it's connected even though it isn't.
This thread is 4 years old and this issue still hasn't been fixed. What a shame.
Same issue here on OnePlus 3 even after factory reset.
I have this same problem after the security patch Mid March to Jan 1, 2019. The WIFI doesn't show in the top status bar, but toggling wifi off/on fixes it till the next overnight. I did make one change to my wireless about that same time and that was moving the min connect speed from 6Mbps to 12Mbps to help with bandwidth issues being cause by devices using low speeds and having several SSID broadcast. My S7 and Tab A both work fine - so I think it was something in the security patch.