Database Info

Treo 750 V T-Mobile MMS Settings

Hi guys,
I have the Palm 750v unlocked with my T-mobile sim in. I have setup the Internet connection etc but the new MMS/SMS package sets up different and I cannot set up MMS .
Need someone who knows the password for T-mobile UK MMS

Anyone with any idea , even if you copy down the vodafone settings that would give me a guide of what is different.
Cheers

moved to treo section

Try this works for me

Thanks Chrisboy
Have you managed to get the device to send an MMS?

I havent tried to be honest but i did with my Tytn and it didnt work, i assumed it had to be switched on by Tmobile
Chris

mms I can't get working currently.
A network error (0x150) has occurred.
First things does anyone know where the automatic settings are linked too?
They must link back to a file in the registry or maybe in the windows file.
manual settings I have tried (same settings that work on my tytn still no luck)
The menu settings are different to the ones on my TyTN.
Menu,Options,Advanced
auto / manual
select manual then edit
If anyone gets it working on tmobile please post.
Thanks
speed tests are fantastic currently getting 1.1 megabits per second.

[QUOTE
speed tests are fantastic currently getting 1.1 megabits per second.[/QUOTE]
Is that on your Tytn or the 750V ???

Treo 750v chrissyboy6969. I love the device.

Dude how do you get 1.1mb/s on the device, HSDPA is not enabled the most i can get is 300kb/s

Not enabled a thing just did a speed test on the device and I am getting over 1mb always best so far is 1.1mb tmobile uk sim card. I know the phone doesn'y have wifi but I can live with these speeds over GPRS.

Very strange, i am on tmobile and i had the tytn before this and my speeds were around the same with the tytn but with this i can only get 300kb/s do you have the vodafone standard rom as well and what do you use to test the speed
Thanks
Chris

Guys Paul at Modaco sent me this . Its from the registery I guess the Vodafone part is hard set into the registry.
I have tried this and it doesn't work . If I open it with Notepad the Tmobile settings seem wrong . Is it simply just entering the correct values and you are done?

Treo 750 Clear MMS Settings
Today just got an "unlocked" Treo 750v (Vodafone Version).
The MMS settings are buried in the registry. Cannot get to them via typical set up options.
There is no way I can replace Cingular MMS settings with Tmobile (My carrier).
If I go and make change manually, the changes do not take effect. The next time I reboot/restart phone these settings disappear.
I have found registry import files in different forums, but none seem to make change properly.
Any ideas?

Yea , it seems an issue and it does come from within the reg. I have to date no none fix . Maybe some of the other more techy guys could help on the other forums.

I received my unlocked Treo750v yesterday.
So far I have been successfull in getting everything working except MMS messages.
Currently, I have aquired what I believe to be all the necessary information in order to send T-Mobile USA MMSs:
Message Center Number: +12063130004
Email Center Number: 500
MMS Gateway address: 216.155.165.050
MMS URL: http://216.155.165.050/servlets/mms
Network Profile: Default
Some people have stated they were unable to get these settings to stay after restarting their phone. I am not experiencing that problem. The closest I can get to reproducing that error is that when i turn off the cell capabilities, the Message Center Number disappears. However the correct number reappears when I turn the cell functions back on.
I've taken a brief look at the reg file in T_Mobile_750v.zip
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Messaging]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Messaging\Prefs]
"NetworkProfile"="MMS"
"MmsGatewayAddress"="212.183.137.12:8799"
"MmsUrl"="http://mms.vodafone.co.uk/servlets/mms"
"UseManualNetworkSettings"=dword:00000000
"AutoDownloadMmsEvenIfRoaming"=dword:00000000
"AddMediaDontShow"=dword:00000001
"EmailCenterNumber"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\General]
"IsGSM"=dword:00000001
"ShowAdvancedPreferencesTab"=dword:00000001
"ShowSmsToMmsConvertWarning"=dword:00000001
"UseVodaphoneVoicemail"=dword:00000001
"ValidityPeriodAvailable"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\SMS]
"CanSendBlank"=dword:00000001
"MaxCharsPerMsg"=dword:000000A0
"MaxPartsPerMsg"=dword:0000000A
"MaxRecipients"=dword:00000014
"SMSCUseSIM"=dword:00000001
"SMSC"=""
"RequestDeliveryReceiptAvailable"=dword:00000001
"SMSEmailGateway"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\MMS]
"MMSC"="http://193.254.145.140:8002/ "
"MMSUA"="MDA Vario/2.0/arcsoft-mmsua-3.2.0.xx"
"MMSUAProf"="http://www.htcmms.com.tw/tmo/mdavario-2.0.xml"
"MMSProxy"="149.254.201.135:8080"
"APN"="T-Mobile Internet"
"CanSendBlank"=dword:00000000
"CcBccSupported"=dword:00000001
"DefaultPageDuration"=dword:00001388
"IsPictResolutionLimited"=dword:00000000
"IsWAVSupported"=dword:00000001
"MaxAudioSize"=dword:0004B000
"MaxMsgSize"=dword:0004B000
"MaxPictHeight"=dword:00000000
"MaxPictWidth"=dword:00000000
"MaxRecipients"=dword:00000014
"MaxVideoSize"=dword:0004B000
"RequestDeliveryReceiptAvailable"=dword:00000001
"RequestReadReceiptAvailable"=dword:00000001
"AcknowledgeMsgRead"=dword:00000000
"AcknowledgeMsgReceipt"=dword:00000000
I'm going to proceed and edit the messaging portion of the reg file, and import it on my cell, however I don't really know how to approach the VARNISH settings.
What exactly are those?

Where did you make the changes to these new settings?
Did you make the network settings as "Manual" and enter these manually, or change the registry with these settings?
Thanks

OK, found a posting on TreoCentral that solves the MMS issue.... take a look
http://discussion.treocentral.com/showthread.php?p=1109428&posted=1#post1109428
Works fine for me!

MMS Sorted Send and receive (UK Tmobile)
Setting, Connections, Connections
add a connection (You may have one if you using GPRS on tmobile)
if not enter a name for the connection i.e Tmobile GPRS
modem Cellular Line GPRS.3G)
Access point general.t-mobile.uk
username - user
password - one2one
Finish
Start, Messaging, Menu, Options, Advanced,
Click Manual then edit
Message center number should already be there
Email Center number (Blank)
MMS Gateway - 149.254.201.135:8080
MMS URL - http://mmsc.t-mobile.co.uk:8002
Network Profile - Tmobile GPRS
I use the same profile as my GPRS Internet but some people just add one under connections called Picture Messaging or something along them lines.
I took a look at the registry file and changed it and got everything working but when you restart the phone settings default to the original ones which cause message to stop send and receiving.
I also took some pictures of some speed tests as I am getting over 1mb speeds.
I am so happy with my Treo 750v it was a good buy everything that I want is now working. more pictures in my next post.

Tried what yo have and still sits there at 10%
Can you put some screen shots up of your network settings

GPRS/EDGE fails to connect to Cingular

My 8125 has been SIM/CID unlocked and I've loaded numerous WM6 ROMs and currently have CROSSBOW RELOADED running. Never a problem (well maybe a few !!) flashing Faria's Roms or others. Thanks for all the GREAT ROM work!! I also have a ROM Kitchen ROM version I loaded too!!
The ONE issue I have is that the GPRS/EDGE data connection refuses to connect. I live in area with EDGE but I fail to see the E or G icon pop up EVER. When the modem tries to dial the G icon appears briefly but I get the "no connection...." message.
WiFi and Bluetooth work like a champ on all ROMs loaded.
I thought that this behavior might be caused by Radio ROM and I've loaded the following with same results: 2.40.11, 2.47.11, and currently have 2.19.11 running. I also went back to Cingular 2.25.11 without success.
At one point I flashed back to the button 1.05 in hopes of cleaning stuff out! I then upgraded to stock Cingular 2.25 and same problem. No data connect. I then when ahead and flashed up to WM6 (Crossbow_reloaded).
Yes, I have a $20/mo Cingular data plan and I'm using the standard WAP settings for Cingular.
What am I missing???
Appreciate your help!!
Cingular 8125
IPL 2.26
SPL 2.26
GSM 2.19.11
OS 2.18.0.0

Hmmm. Sorry to ask such a question, but does it do it when you're unplugged from the USB cable?
Under Start - Settings - Connections - Connections - Advanced - Select Networks, did you try both My ISP and MEdia Net?
Try these cabs if you haven't already:

Thanks for your suggestions. Yes, I'm disconnected from USB while testing data connection.
I ran both of the cabs you included in response, but no help.
Any other thoughts?
Thanks,

I have wondered if there is a chance that some flag is set in the SIM that is preventing my connection. Anyone have experience here?
THX,

I've never had an issue with GPRS/EDGE after running either of the cabs above. I'm curious if you were to go back to the stock Cingular rom if it would all start working, or if there is some other issue going on here.
Also, for Cingular, if you are running WM6, don't even attempt to use any radio other than T-Mo 2.19 UK. Newer ones just seem to cause problems on the Cingular network with WM6.

I believe I have flashed back to stock Cingular 2.25 with this: (RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1).
I get same symptoms. I tried both "MY ISP" and "MEDIA Net" network settings with same results. I ran the cabs sent in this thread a couple of days ago too.
Specifically, I start IE and enter a web address and tap the green arrow to open the page. The little G appears w/moving arrows in the top bar and the info box says "Connecting to: Cingular GPRS". It stops and tries again and eventually the info box says: "Cannot connect: Dialed wap.cingular. There is no modem at this number".
Anything else to try?
Appreciate your help!
Cingular 8125
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1

I found a related thread at the Cingular forums:
http://forums.cingular.com/cng/board/message?board.id=cingular&thread.id=40993
According to prubin (poster in the above thread), Cingular discovers you are on the wrong plan for your PDA and automatically disables your access. I don't know how true that is, but it may be time for a call to Cingular to verify your connection and plan.

kegobeer said:
I found a related thread at the Cingular forums:
http://forums.cingular.com/cng/board/message?board.id=cingular&thread.id=40993
According to prubin (poster in the above thread), Cingular discovers you are on the wrong plan for your PDA and automatically disables your access. I don't know how true that is, but it may be time for a call to Cingular to verify your connection and plan.
Click to expand...
Click to collapse
Not true at all.
The only reason they disable the accounts has nothing to do with the device, but the amount of data usage.
Those yahoos were probably using > 500mb of data a month, or something insane that threw the flag.
Cingular doesn't care what type of device you have. It's just a marketing gimmick for them.

Yeah if you can't connect on the stock Cingular rom (the extended rom configuration will set all the GPRS and MMS stuff up for you so its ready to go) then you need to call Cingular, as its either them blocking you (not sure how they would do that really) or your phone has an issue. Be prepared, it seems Cingular will do some basic troubleshooting and then they'll offer to ship you a new phone. They don't take much time to really look into why a problem happens if its not very basic. I had a question about MMS messages and after a couple of minutes they were ready to ship me a replacement phone. I just laughed at how dumb that was. I let them note it in my account so I can get a future replacement very easily, but declined at the time.
A guy I work with has had Cingular replace (warranty exchange) his 8125 3 or 4 times now (he gets a scratch on it, so he calls and tells them some feature doesn't work)... Sheesh.

mfrazzz said:
A guy I work with has had Cingular replace (warranty exchange) his 8125 3 or 4 times now (he gets a scratch on it, so he calls and tells them some feature doesn't work)... Sheesh.
Click to expand...
Click to collapse
And people wonder why it costs so much for a phone - I'm paying for those replacements!!!

kegobeer said:
And people wonder why it costs so much for a phone - I'm paying for those replacements!!!
Click to expand...
Click to collapse
Yep, I totally agree. But the cell companies don't seem to discourage it either.

No more SMS

Hey guys. I have been upgrading my 8125 with various different WM6 roms and somewhere along the line I lost me text messaging capability. It just says the the text message cannot be delivered. I have checked the setting and the number for the service center and all that is fine. Anybody have any idea what the heck is going on? corrupted DLL file perhaps? It doesn't matter to what windows (WM5 or WM6) I go to, the problem still follows. Any help in this matter is greatly appreciated.
ps. My signature should have all the info of my phone except I am running Xplore 1.1 rom now

do you have Cingular service? if you do, the current radio rom that you are running isnt good. you want the t-mobile UK 2.19 radio rom. it is much better for us cingular/at&t users. hope i helped
-Nstefanelli-

I have Rogers which is a canadian provider. I am using a sim unlocked cingular 8125.

Try the 2.19 radio you can install it alone without changing your rom .
this is The 2.19 radio link
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
i think that most of us using this Radio
Good Luck

i tried the 2.19 radio rom with no luck. i have tried the 2.69 as well as the 2.61 roms and all have the same problem. the text msg does not go throug, jus gives me the error "The text message cannot be sent". thanks for your help though.

Cingular 8125 Faria WM6 MMS Error

Here are the specs on my phone:
Cingular 8125 G3
CID Unlocked
IPL 2.26
SPL 2.26
GSM 2.19.11
OS 2.18.0.0
Faria WM6
Unlimited data/web plan w/ AT&T
Registry cahnges:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"RILEnableEONS"=dword:4
When I originally loaded WM6 I had the latest radio version (2.6x I think) following all the guides on this site. However, I was continually missing calls/notifications. I reverted back to radio version 2.19.11 and now all of those troubles seem to have gone away. I am having an issue with MMS, however. I can receive messages fine, but when I attempt to send them, they never get sent. I have configured my MMS server using the following guide:
https://www.cingular.com/support/deviceConfig.do?content=KB56044.html
Whenever I attempt a send/recieve for MMS I get an "Error Synchronizing" error. All other functions seem to working great. Any ideas?

I had the same problem. This is the only set of instructions that I've found to work. Follow every step or it won't work.
http://www.pocketpcaddict.com/forum...ingular-using-unlocked-dopod-818-pro-usa.html

Rus,
Success! I checked out those instructions. It basically details rebuilding your whole connection (not something I wanted to do). But looking at it, I found what appears to be the issue: GPRS Authentication. The installed settings was for CHAP authentication. I changed this to PAP authentication and all seems right in the world. I could successfully send and receive both SMS and MMS messages.
Note:
Clicking “Send/Receive” in the MMS account still gives the “Error synchronizing” message, however, the messages were delivered.
Thank you for the lead...
-CZ
-CZ

Glad you got it all worked out. I looked high and low and tried many many different things before finding that set of instructions.

WM 6.1 & Orange UK

Hi Guys,
I have just replaced my trusty Wizard (running Wizard Love ROM WM5 and working great on Orange UK) due to me damaging the external antenna plug which caused the whole phone to cease receiving a signal
I bought myself a replacement Wizard that has WM6.1 Pro ROM on it with HTC Touch Flo. I put my Orange SIM into it and cannot do much else now other than send & receive phone calls - no SMS, no GPRS, also cannot access the "phone" icon under the settings menu or even access the "SIM Manager" either.
Any ideas anybody? I suspect the Orange SIM myself!!
Many thanks in advance.
Mike.

Maybe your sim card is damaged in some strange way?

I'm not sure - the SIM works great in my other Wizard running WM5. In fact I had this same problem with my other unlocked Wizard, and it was only after changing to the "Wizard Love" ROM that it was sorted out.
I have read that it may be that the radio ROM needs updating - I don't really know.
I suspect there are other UK users out there on the Orange network who have WM6.1 running OK.
Cheers,
Mike.

Better check your SIM card in other phone for reliability ;] cheers

I have and the SIM works fine.
Although the OS is upgraded over what was on my previous Wizard, it would appear that the IPL/SPL and GSM are older versions on my replacement phone. Is it possible to upgrade these without affecting the WM6.1 install??
Cheers,
Mike.

After a lot of reading I seem to have now sorted out the problem.
I flashed a new radio ROM from 02.07.10 to 03.02.11. I put the SIM card back in and found I had a number of voicemail messages and SMS's waiting for me. No changes to any settings and I can now access SIM Manager etc, etc
I'm just happy that I'm back in communication!!

Well, further to the above I cannot now access GPRS or the MMS service.
I have tried all the GPRS settings from my older Wizard and flashed different Radio ROM's on my replacement Wizard. Now on Radio ROM 02.19.11 as I did read this seems the best one for the UK.
Anybody else on here use Orange (UK) for GPRS or MMS, and has it working so I can see where I'm going wrong??
Thanks in advance.
Mike.

I've done a lot of reading and had a play...seems to work now. I even have the "E" symbol on screen, so I'm getting an EDGE connection now that is a first!!
I was using CR86 Touch HD Cruise Edition, so I flashed XDA2's WM6.5 M2D ROM onto it instead. This then automatically picked up a GPRS/EDGE connection, but I could not access the SIM...I got the "the phone is not ready, wait 15 secs etc,etc" message. I then flashed the Radio ROM from 2.19.11 and took it up to 2.69.11 (I have previously tried 03.02.11, 02.37.11, 02.25.11, 02.19.11 to no avail)
Seems to work OK, I have sent & received a MMS messages & standard SMS now.
I just need to set up my email & sync my contacts (again)