Related
Hey all...
read through lots of posts, but can't think of a solution to get the gps working.
I have a Rikaline 7 series BT GPS receiver and TomTom2 (Updated to 2.4 and GPS 2.09). I have bonded the device to the xda ok, but can't get the gps to start. I have selected Tom Tom Wireless and BT on Com 6.
Also switch off beams... any tips???
I did a hard reset before i installed tomtom2, no other bt device attached at the minute.
Thanks
Fais
I got my Rikaline via post via ebay today. The instuctions were all wrong, telling me that it would be on Com8, when it appeared on Com 7 after some resetting of the PDA (it just wasnt seen at first even though it had bonded) ... sorry, but can't be of any more help than this .... make sure you get the alternative bluetooth stack at:
http://bluetooth.i-networx.de/index_e.html
Try removing the gps from your bonded devices, run the tomtom wizard making sure that bluetooth is in "discoveravble" mode, it should then prompt you to choose, click "new" in the gps manager then when it finds the gps click it and finish. Go to bluetooth manager, switch to "on" and then run tomtom. Might help.
Thanks for the replies - really appreciate it. I tried what you both mentioned, and in the end i had no choice but to use Towa's BT tool and set it on serial com 5 for tomtom2 to pick it up. Every so often i have to rebond the device to keep it working which is a pain, but it works at least.
For some peculair reason, if i take the device out of range, without exiting tomtom2, again i have to rebond the device.
Thanks for the help!
Fais
Don't know if anyone else here has tried this workaround at all?
Using the remove programs in settings or activesync, remove Tomtom Bluetooth GPS Support (or whatever it's called).
Instead of setting up TT5 to use "Other Bluetooth GPS", set it up to use "Other Cable NMEA GPS".
Set the GPS Baud rate to 9600 or 19200 (both work fine for me).
Then set the COM port to "Bluetooth Serial Port COM6:" (or whatever your outgoing port number is for your BT GPS device.
The only downside is that you have to turn BT on manually before you start TT5 but it doesn't disconnect BT when it exits.
Used this setting on 3 different roads which lately caused me no end of lock-ups and not once has it happened. I think the problem is with Tomtoms bluetooth support drivers, constant problems with them since TT3.
I've only used this for 3 days and 400 miles but everything seems to be fine up to now, including traffic...........we'll see.
TT5
Did your TT5 load onto the XDA with no problems?
I have an XDA IIi and it loaded on no problems at all.
I have an XDA IIi and it loaded on no problems at all.
Great suggestion. I was getting really fed-up with TT5 and about to give up on it. Just back from France/Switzerland where it kept freezing, useless.
Simply uninstalled the TT GPS Support as suggested and used the existing BT Partnership with the TT Receiver and hey presto ... TT running smoothly again, shame I'm back in the UK on roads I know!
Does not work for me. But well worth a try.
This is doing my head in now £200 worth of TomTom software and dongle and unusable with the phone on!
arh help please
I have a problem with my XDA11 whilst trying to upgrade my navigator 3 software to navigator 5......
After I load the main program upgrade and then try to install the map disc one my pc ( desk top XP Profesional os ) it come up with tempory folder full, does'nt say if it it the pc or the xda11.
I have gone into all the temp folders on the pc and emptied them and it had not resolved the problem and I cant find any in the search function on the XDA
Any ideas??
Its a genuine copy of the Tom Tom software as well and there are no contact details on there sites including e-mail links
Regards Lee
there are known issues with Bluetooth device support using TomTom5, i was advised to use the 'Other Cable NMEA GPS' option when connecting a non TomTom bluetooth GPS unit.
also, i connected at the baud rate recommended by the manufacturer which i think was 9600, this worked fine without removing any parts of the software but meant manual switch off of Bluetooth in my MDA after use.
in addition to this, the Bluetooth connection issues with non TomTom GPS units should be resolved in the 5.10 upgrade, just installed it and re-paired an MDA3 to the Globalsat GPS receiver...it now auto switches off Bluetooth after use and the connection can be made using 'Other Bluetooth Receiver'.
another bonus of the 5.10 update is the keyboard shows on the display without having to use the hardware keyboard on the MDA...lovely.
for more info:
How to manually configure TomTom NAVIGATOR 5 for Bluetooth GPS receivers.
answer to last question about free memory during install problem can be found here:
When I install the TomTom NAVIGATOR 5 Upgrade the following error occurs: - Not enough free space occurs on temporary folder. Cannot run Setup
reply
Thanks for the link dont know how I missed that....
Only problem now is when I tap Start etc there is no Run command to enter the %......% command line
I tried the search in explorer option with no results any ideas?
Sorry I'm not the brightest lamp on the planet
you are tapping Start on your PC right?
maybe the 'Run' command has been disabled or does not appear in your Start menu because it's been disabled.
are you the Administrator of your PC? are you running XP?
you may have to go into 'Control Panel', 'Taskbar and Start Menu', Start Menu tab and choose 'Classic Start menu'
trying to cover as many bases here so you can make some headway without too much back an forth as i'm signing off now....if you can get to the 'Run' command on your PC then you'll be able to solve the problem and proceed with the fix from the TomTom site.
good luck.
I have had so much trouble with satnav on pda's, especially with bluetooth that although I have xda 1 with wired gps and spv M1000 with bluetooth gps I have just boght a Mitac Mio 269 dedicated gps system. It has a 2.5 gb hard drive, 500 megs for mp3, the whole of europe, which is millions of miles, preinstalled on the system. Comes with remote and different mounts and has sd card expansion. Obviously it isnt any good for phone calls or word processing etc but it gives me peace of mind when travelling as I have zero sense of direction and very little patience. I still leave my other gps in the car though, as a backup. :shock:
I have had so much triouble with satnav on pda's, especially with bluetooth that although I have xda 1 with wired gps and spv M1000 with bluetooth gps I have just boght a Mitac Mio 269 dedicated gps system. It has a 2.5 gb hard drive, 500 megs for mp3, the whole of europe, which is millions of miles, preinstalled on the system. Comes with remote and different mounts and has sd card expansion. Obviously it isnt any good for phone calls or word processing etc but it gives me peace of mind when travelling as I have zero sense of direction and very little patience. I still leave my other gps in the car though, as a backup. :shock:
Thanks
Decoy-7
Many thanks I told you I wasn't to bright you hit the nail on the head with the ( PC comment ) I was looking for the run command on the XDA11...
deleted the exe and evrything is loading up as we speak....
thanks again for your patientence....
Crusin-thru' I can see why you have gone your route its a lot less trouble I just use mine now as a back up phone because I spend a lot of time away from home and just simply use a Nokia 6680 on 3G.....
Also since I stopped using the XDA11 as a phone the pda doesn't keep resetting itself every ten minutes like it did!!
cash_13,
it happens to the best of us...had to think about it myself, instructions on the TomTom site could have been more specific saving many people a lot of time...but you dont always realise this until you have to follow the instructions yourself....glad you got it sorted now.
It works, but same problem as with TomTom, no keys - only fake cursor
What version are you using? After trying a few of the 'trial' versions out on the Net, I finally plunked down the cold hard cash for the retail version. After installing and then installing the update from Route 66's website, it works great with the d-pad and softkeys. I'm on version 7.0.3995 and it's by far the best Smartphone-compatible nav software I've tried. It doesn't support landscape though, and their support people couldn't tell me if a landscape version is in the works or not.
Also, if you're trying to pan the map via the d-pad, that doesn't work on any version of R66 for the Smartphone. The only way to pan is to navigate around current GPS location without setting a destination. Rather limited in my opinion, but R66 support also said they had no plans on changing that functionality.
I have just copied files from CAB to phone and made shortcut, i am using PDA version 7.0.970.1 There are only 2 files: /programm files/route 66/R66Navigate7PPC.exe and /windows/R66WCESetupDLL.dll
R66 7 smartphone
Hi,
i'm running a R66mobile7 build 7.0.2992 and works perfectly.... no need to use a ppc version
just got R66 mobile7 same build 7.0.2992 and yes, it works fine with numpad.
but i can not find configuration for GPS how to connect it with BT GPS wich is on COM7 ?
at programm startup it just shows that GPS not found.
did you add bluetooth serial port after pairing gps device ??
I got ir working. Started TomTom, connected to BT GPS, started R66, and in strange way it connected to BT GPS, closed TomTom and R66 still working. And now it work every time, even without tomtom
very strange way... i only need to launch the program to make it work....
quits
MY Route 66 crashes just after i have selected the map
symbian?
hi
Im a little new to this!
Will the symbian route 66 work on smartphones?
hi,
can anyone post a download for the Route 66 7 like with TomTom Navigator?
hi there it has been a while but i am uploading a easy install for route 66 smartphone you will have to find your own maps as i only have a english one but any way give me 10 mins and i will start a new topic hope this helps
http://www.gearlive.com/news/tag/irxon+keyboard
Having problems connecting via bluetooth with diamond. I did it with my laptop. The diamond asks for a passcode. Inputting anything but blank comes up with an error. After accepting the incoming connection, it asks for another passcode, this time I can't input nothing, when I input something I get an error of incorrect passcode, if I click cancel, it doesn't type.
Any ideas?
Same problem here!
I connected a logitech dinovo mini with my diamond with no problem.. diamond ask a passkey, write with keyboard and then work...
sup guys..
I have a LG MS25, it's an american model of LG KS20.
At the firt time, when i tryed the IRXON keyboard I had this problem.. but then I start to look at the options and uncheck some bluetooth criptography and security parameters.. and it works!!
Now i digit the passcode and the connection is acepted.. but sometimes, when the passcode have a "zero" char it don't works.. but just sometimes.
I'm really glad that it worked, because i got it from eBay and spent R$130,00, (almost 50,00 United state dollars) because of the importation taxes of brazil..
bluetooth cryptography?
could you be more specific. You have an LG MS25, a windows mobile phone. Where did you find these settings to disable?
edit: i found a link explaining something about this, but I can't find the setting
http://xdaflameusers.com/viewtopic.php?id=98
Also, an update.
When presented with the passkey on the phone. I click next, then I must click the enter key on the phone. The phone than accepts the connection, but puts the keyboard in disconnected devices.
That's it.
I don't have any services listed under the "select services to use from this device" for the keyboard.
the problem is the bluetooth stack i think..
ms25 is the same of KS20.. widcomm bluetooth stack i think..
I've recently bought a HTC touch Viva (opal).. and I was havin problems to connect (never happens after input the key on keyboard) , and the bluetooth stack is that one from Microsoft.. so after some research i've decided to try the BlueInput 1.5 RC4.. it's not a freeware.. =/ but it works perfectly.. i think it'll work on diamond too!
i have been trying to use tomtom with lg ct810 incite. however no luck getting it to connect to internal gps. or any other program for that fact. does at&t lock gps to navigator somehome. any help would be appreciated
any help??
Without having the device (which almost noone here has), it's very difficult to help without a proper rom dump. With a rom dump help can be given.
If you're interested in dumping the rom and posting, here's info on how to do so:
http://forum.xda-developers.com/showthread.php?p=2919305
Navigation Software for the Incite.
I have not tried TOM-TOM but i have GarminXT5.0.20w woking while reading the internal GPS on it's own and I have Nav-N-Go's iGO8 working using Franson's GpsGate as a gateway between the internal GPS and the software.
and google maps tool "Locate Me" works fine on it's own with the internal GPS. NEVER change anything under "Start-Settings-System-External GPS"; that is unless you are trying to connect to any GPS other than the internal. I got the Garmin working on second install and it took 2 months for me to get a good version of iGO8 that wasn't laggy on my incite. It can't be too difficult since this is the first phone I ever owned that has an actual operating system.
Look here
Check out this thread in tha ATT wireless forum, and then find a copy of gps gate.
http://forums.wireless.att.com/cng/board/message?board.id=LG&message.id=30327
13blackwolf13 said:
I have not tried TOM-TOM but i have GarminXT5.0.20w woking while reading the internal GPS on it's own and I have Nav-N-Go's iGO8 working using Franson's GpsGate as a gateway between the internal GPS and the software.
and google maps tool "Locate Me" works fine on it's own with the internal GPS. NEVER change anything under "Start-Settings-System-External GPS"; that is unless you are trying to connect to any GPS other than the internal. I got the Garmin working on second install and it took 2 months for me to get a good version of iGO8 that wasn't laggy on my incite. It can't be too difficult since this is the first phone I ever owned that has an actual operating system.
Click to expand...
Click to collapse
Hi, I have a problem with Igo 8 on my LG Incite. It works fine for me when the phone is plugged in. When the phone is not plugged in, Igo8 doesn't respond to any touches. The screen goes black every time I run Igo8.
Could you share your experience with Igo8. I'd appreciate it.
Thank you.
I have the same problem with Igo8 on my LG incite?
haha20055, did you find the solution yet?
13blackwolf13, Can you give any hint?
Thanks
I own an Incite, subsidized from AT&T. The internal GPS works fine with Google Maps, as well as a geocaching program called WMMiniGPS.
I would like to use the GPS with Streets and Trips loaded on my laptop, but GPSgate on the PPC will not find my GPS port. I have version 2.5 of GPSgate, but it cannot detect anything.
I've read that other users have gotten GPSgate to work on the Incite. Am I missing something? Anyone know what COM port the GPS is on?
Nevermind. I forget to set the GPS to a virtual port through the control panel. It works fine now.
LG Incite GPS problem solved!
I got it working as well but only thanks to GPSGate. It took me some time to find a working serial for it but now it works like a charm. Google Maps works without it for some reason bypassing the GPS receiver lock. iGO8 was a little buggy first but the 14th version I installed worked ok finally It took me about a week to get everything set up.
In the end, I got them all working so if anyone is still having problems they can contact me and I will give them the solution good to go.
On the other hand, does anyone know if I can find a better ROM version? The original one is ok but a little sluggish right out of the box. Thanks
hi every1
i got gpsgate to work. does gpsgate use data on the start up because sometimes when i start gpsgate i see the data icon on the signal bar trying to connect. it connect a few a seconds with a G or a E on the signal bar than disappears. does that mean that gpsgate use data on the start up. i use stop data from lg incite forum and i know that i can not connect to medianet but when i start up gpsgate it looks like its connecting or connects because i get the G or the E on the signal bar. so any help will be appreciated
tia
i have garmin 5.0.0 w20 working on my incite
Problem solve for IGO8 on Incite Phone
I found the solution to the problem It require a line in the sys.txt file to specify the driver=GDI in the rawdisplay section.
[rawdisplay]
driver=GDI
Note: for Amigo use driver="GDI" in the system.ini in the save folder
help
hiii
I have a big trouble with this igo 8. Since I installed a software, it works well when I connect my lg to the computer(active syc. position) but when I did plug it off, software dosent open. if even it is open, dosen't respond touches on the screen. Please help I'm about to beat my mind((
tunceray said:
hiii
I have a big trouble with this igo 8. Since I installed a software, it works well when I connect my lg to the computer(active syc. position) but when I did plug it off, software dosent open. if even it is open, dosen't respond touches on the screen. Please help I'm about to beat my mind((
Click to expand...
Click to collapse
IT is screen refresh problem . use my solution posted above.
Always gps problems with lg Garmin work fine, except speed of running. iGO & Tom Tom still without success
about help
thanks. it worked. also while it was running , 3d arrow icon or 3d car icon dosent show up on the screen. Is there anyone to help about this issue.
LG Incite CT 810 with IGO8
Hi Dismass,
Can you show me how to set Port, Baud to make LG work with IGO8
Thanks so much
If you are using GPSGate you can do it from the settings of GPSGate. Mine automatically created virtual COM2 and iGO found it instantly. If yours didn't do that automatically go to settings and create a new virtual port, it's fairly user-friendly so you shouldn't have problems doing that. After that it is just a matter of starting iGO and pointing it to the port you created, baud rate doesn't seem to make any difference on mine btw. Let me know if you are still having problems after that.
footballfan said:
hi every1
i got gpsgate to work. does gpsgate use data on the start up because sometimes when i start gpsgate i see the data icon on the signal bar trying to connect. it connect a few a seconds with a G or a E on the signal bar than disappears. does that mean that gpsgate use data on the start up. i use stop data from lg incite forum and i know that i can not connect to medianet but when i start up gpsgate it looks like its connecting or connects because i get the G or the E on the signal bar. so any help will be appreciated
tia
Click to expand...
Click to collapse
GPSGate does not use a data connection, it just grabs the data coming from the gps receiver and sends it to a virtual port that it creates for other software to use simultaneously. The icons you see indicate the availability and signal strength of certain networks (EDGE, GPRS, etc.) although they've been kinda unreliable on mine so I stopped looking at those pretty soon after I got my phone.