I will download WM6VOIP but i look the menu is not avaible ? i dont understand anyone is help me? my device is i-mate sp5m to have wm6 tornado
Which Tornado ROM are you using, if you are using Phil's BETA ROM, you might need to do some tweaking, if you use Andot's PEE, it is ready to be used, just config the XML file or use VOIPISER in the Accesories
hello .....
they are Italian and I wanted to know if someone has never tried to write a program similar to interface TOUCH FLO being used the file touch.dll
I programs in VB and in VC but for touch.dll I have not found any documentation...
someone can help me?
thanks
(sorry for translation.... i'ts made by babelfish)
Hi,
I have a German MDA Vario 3 (German - T-Mobile OS and German QWERTZ ÄÖÜ) and I need to flash it with an US/UK OS.
I assume after unlocking the CID I can flash the device with either the Generic HTC Rom or the AT&T Tilt Rom.
So far so good, but what happens to the German Keyboard Layout, this isn't the same as The Tilt or Genereic HTC Layout.
Any Ideas?
Thanks
Mike
hello L2C
pls have a try this method:
in the path [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change the "Curlang" data to 1031(Dec) or 407(Hex)
soft-reset~
if it doesnt work,pls tell me
i make a cab in case you havent a tool to edit registry
transfer the cab to kaiser and run it
softreset
Thanks for the swift help.
I am just hesitant to flash my device right now, I am unsure to use Soft SPL or Hard SPL.
Cheers
Mike
oh mike,you are welcome
i suggest u to flash the rom with hspl v1,in my opinion that's much safer than sspl.so far i've seen some flash rom unsuccessfully with sspl
u can follow pof's thread to get the hspl
if u flash AT&T Tilt Rom i think ur output would be not the same with ur german keyboard,because the LCID isnt the german one
then u could use the cab to fix it !
hope it can help u, i install the cab and my TyTNII's layout switches to QWERTZ
cheers~
Hi woohyuksheng,
thanks for your help, appreciate it!
One question, the cab you included in your post switches your QWERTY to QWERTZ, right?
But does it also switch QWERTZ to QWERTY (so back an fourth every time you install it?)
Cherrs
Mike
if yours is QWERTY originally,you patch the cab on your kaiser and after soft-reset that your keyboard output will become QWERTZ.
and of course u can remove the cab and give it a soft-reset,yours will be back to QWERTY.
in one word, this cab can only make your keyboard layout become QWERTZ,uninstall it,will become the original one.
regards~
Sheng
My keyboard is originally QWERTZ and I need a patch to make it QWERTY.
Sure that the one you posted will help me?
Cheers
Mike
oh in this case you want it QWERTY,that should be no problem~
try this cab
regards
Sheng
Hi Sheng,
thanks alot, I will try this later today.
I will post feedback
Mike
OK ,wait for your good message~
and one more choice u can take~
if u want it QWERTY like the Tilt, patch with this cab
the Tilt's QWERTY differs with the ordinary QWERTY
the symbol "@" and the "!" r upside down,maybe u can find it comparing the Tilt's pics with others~
regards
Sheng
Hi Sheng
I got one more question for you, maybe to make myself a bit clearer.
I got the German T-Mobile Vario 3 (German Windows Mobile 6os and therefore a German Keyboard Layout (QWERTZ).
I want to give this device to someone in the US, he has an AT&T Sim card.
First question, what ROM works better for him:
AT&T Tilt Rom
or
HTC Original Rom
In any case, whatever ROM I flash the device with he will need a Keyboard patch applied.
Any answers ?
Thanks for your help
Mike
ok,i think u should flash the ATT rom for him.maybe ATT rom would fit him better,there r many ATT softwares in the rom.
that u dont need to install any keyboard patch,it would be QWERTY layout~
but the type on your keyboard wouldnt match the layout,if you want the keys match the layout,u can fix it with my cab in floor 2, up to u.
Regards
Sheng
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
L2C said:
You are the Man! Thanks
So to be clear:
Hard CID Unlock, then flash the device with ATT Rom and then apply this cab:
Tilt QWERTYsheng's keyboard patch.cab
Correct?
Cheers
Mike
Click to expand...
Click to collapse
No thanks,after u flash the ATT ROM u need not to apply "Tilt QWERTYsheng's keyboard patch.cab" , and your device's layout is like a Tilt, but when u press the hard key "z"(between "t"and"u")on your keyboard it puts out "y",'cause your QWERTZ hard keyboard and Tile's keyboard are not the same,right?
and if you want to fix it ,u should apply the cab which i posted in floor 2,then while u press the hard key "z" (between "t"and"u"),your device puts out "z"
REGARDS
sheng
Hi Sheng
I flashed the AT&T Rom sucessfully, now in order to have the right keys assigned to the (hard-) keyboard I need to install: QWERTYsheng's keyboard patch.cab correct?
Cheers
Mike
oh ,i think u should install sheng's keyboard patch.cab, the first cab i attach in the floor 2
What do you mean by "Floor 2". Just maybe to be sure, can you attached it once more to your reply?
Thanks Sheng
Mike
hehe it means #2
here it is!
enjoys
Sheng
Hi Sheng
I installed the .cab from a microSD card installed into the device.
I turned it off completly and restarted it again, but the .cab doesnt seem to have an effect.
You said I need to reset it, how do I do this?
Mike
Mike:
I make a new cab that should be work ~ soo sorry about that i uploaded a wrong cab
pls try the new one
sheng
why cant manila rom installs in my asus p527?? some htc installed apps also doesnt run.. i cant even install manila 2d plugin as the device doesnt hav sufficient memory........... is ther ne way to install nd run ne of these??
kindly help..
可以安裝的,我也是p527的用戶,只是因為托盤的問題,所以無法全屏顯示
neway i installed a customized touchflo2d rom for this device.... nd its working just fine..!!
Where did u find?
kalpeshmist said:
neway i installed a customized touchflo2d rom for this device.... nd its working just fine..!!
Click to expand...
Click to collapse
Where did u find customized touchflo2d rom bro???
^^ http://www.pdamobiz.com/forum/forum_topics.asp?FID=86&PN=1
i had given the same link in one of ur own forum thread
How do u seaarch on that web.
it wont load in english.
is there a wm6.5 M2d for p527.
windowsuser said:
How do u seaarch on that web.
it wont load in english.
is there a wm6.5 M2d for p527.
Click to expand...
Click to collapse
till now, there is no wm6.5 m2d... but there is wm6.1 m2d in the above link. use translate.google.com to translate the website from thai to english.
Could u pls upload the p527 wm6.1 with touchFlo.
The link on the thai website ain't working.
Can u also cook a wm6.5 with touchFlo...
windowsuser said:
Could u pls upload the p527 wm6.1 with touchFlo.
The link on the thai website ain't working.
Can u also cook a wm6.5 with touchFlo...
Click to expand...
Click to collapse
6.5 rom cooked with touchflo2d
http://forum.xda-developers.com/showthread.php?t=506417
Manillaon Asus P527
Hi,
Thankx for the Roms they are working just great however there are som bugs in it. This is just to bring them to your kind notice so that u can fix them in your next version.
1. In WM6.5 with Touchflo 2d and Without Touchflo 2d, the some of the Icons are all Distorted, looks like blasted images. if you could make the icons nice and sharp just like other WM6.5 icons it would look great.
2. In the same build When you click on Power settings it will open mode switcher settings and when you click on Mode Switcher settings it will open power settings.
3. when the Touchflo is on the number Pad doesnt work to directly type and dial the number, instead we have to press the answer button and then type the number and dial.
I am really thankful to you for these great Roms.
Could you please tell me if Asus is going to give the WM6.5 update to P527 users?
Thanx
Problem with schist_21189
i have flashed my schist rom 23034 with schist_21189 but the my phone is not working properly.the problems are as follows
1.phone starts very late.
2.if i keep it on the stand by mode and want to close the screen it wont do it.
3.with in 3 to 4 minutes of stand by mode the screen starts to wash out and turns white with nothing happening on it.no key will work in this stage.
4.the usb while starting gives the charging lite but when it starts the usb is not recognizable not by active sync.it wont work at any cost
please help me guys i am in BIG TROUBLE!!!!!!!!!!!!!!
Hello, sorry for my bad english
I have a big Problem.i have cocked a [GER]WM61 ROM with Build 21054 for my Touch HD
It is SUPER fast and all is working.But i cant uninstall CABs.
I can install CABs from SD-Card and with ActiceSync and the CABs are working.But under Settings\Remove Programs i cant see anything, the List ist empty
Where can i look for to find a solution ???
Please help me, my new ROM is GREAT but with a Problem like this is worth noting...
Tiger22
Tiger22 said:
Hello, sorry for my bad english
I have a big Problem.i have cocked a [GER]WM61 ROM with Build 21054 for my Touch HD
It is SUPER fast and all is working.But i cant uninstall CABs.
I can install CABs from SD-Card and with ActiceSync and the CABs are working.But under Settings\Remove Programs i cant see anything, the List ist empty
Where can i look for to find a solution ???
Please help me, my new ROM is GREAT but with a Problem like this is worth noting...
Tiger22
Click to expand...
Click to collapse
Hi,
Did you try some program like Advanced Configuration Tool ? Or maybe SK Tools ?
Dirk
No i have not used Tools like this, but i have some Tweaks cooked into my ROM but where i have to look ???
Which PKG is for instal/uninstall of Programs ???
Tiger22