Related
Recently, I needed ROMs but non of the kitchens I know work. Can you please give me to links of any kitchens you know.
Thank You in advance for your attention!
http://lumpistefan.dyndns.org/
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
If you are cooking a 2002 rom make sure you leave some space.
LumpiStefan said:
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
Click to expand...
Click to collapse
Lumpi , First of all thanks for your Kitchen and ur hard work..
but the last time I was cooking a rom (last week) T mobile Rom 4.01.00 with the Windows Mobile Boot screen image and the 4.01.16 with the o2 Boot screen those images didn't show up I got instead T-mobile bootscreen.
At the end the Rom what's important to me but still there should be some fix for that, Thank you again for the Kitchen I hope to see soon the WM2003 SE in it hopefully.
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
batvanio said:
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
Click to expand...
Click to collapse
Ok. I made an hint, that with the XDA-Developers Autoconfig you have to let about 450kB free for cooking. I'm sorry, that i can't change this. Then it should work. The error of the missing config files will still be there. This is more work for me. But it should only concern the german autoconfiguration...
HTH
Stefan
LumpiStefan
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Re: LumpiStefan
batvanio said:
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Click to expand...
Click to collapse
I'm sorry, but i can't believe this. Have you tried to look at the log after cooking the rom? There is an output of the BAse Rom you cooked.
Many Users are using the kitchen, but i never heard of this problem. Which browser are you using?
Stefan
My brawser is IE 6.0.2800
It is very strange because i tried not only once but several times cooking both roms and upgrading them to the phone, but with the same result.
Very very strange...
batvanio said:
Very very strange...
Click to expand...
Click to collapse
This is true. Tried it now for myself, but all was working fine.
Used same browser version, and all worked fine....
:shock:
I'm sorry, but it looks like I can't help you.
Stefan
What can i do now?
I cannot remove the French ROM. When I am trying to upgrade it with another ROM it says Unsupported language 'FRA'.
Can you suggest how i might fix this.
P.S. - the ROM i want to backup to is in the *.exe format
I think, you have to use adapt rom, or flash your device using an SD-Card. Therefor you have to extract the exe-File with winzip, and copy the NK.nbf file via xdatools to an SD-Card.
There are many threads about this..
Stefan
I managed to do it successfully. Thank you very much for your help!
I also would like to ask you if there is a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!
was wondering if we could use the rom kitchen for xda2?
The Hobbit said:
was wondering if we could use the rom kitchen for xda2?
Click to expand...
Click to collapse
Kitchen should also work for XDA2 ROMS. But in the moment, there are only XDA1 Roms in it. Also you normally don't have the nessesary of doing this since the XDA2 has enough space.....
Stefan
is there a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!
well some programs you can download and install in your ram but rom can only be writen to when you flash the rom and you can only flash the whole rom at once
but can i download the programs from the kitchen, the one which you customize for the rom, and how can i install them to my current rom
Hello,
I follow several instruction to create a backup of CHT ROM before flash WWE ROM or cook WWE + Chinese support ROM.
The ROM is not test because I am afraid brick my device. Is there any expert here can tell how could I recover from brick if the CHT ROM won't boot?
I think it can follow pof's instruction here: http://forum.xda-developers.com/showthread.php?t=334678
But what if the CHT ROM already damaged?
Base on procedure below, is my ROM working?
In short, my procedure is as below:
1. Create dump of ROM by use pdocread.
2. Get part02.raw
3. Get RUU_Signed.nbh from Cooked ROM and use NBHextract to get 03_OS.nb
4. Run (from Imgfs v2) NBDumpKaiser.bat to dump ROM
5. I don't add/remove item at the moment because want to get complete original ROM
6. Run NBBuildKaiser.bat to build 03_OS.nb
7. Use Dark Simpson tool to create RUU_Signed.nbh
8. Replace RUU_Signed.nbh in Cooded ROM at 3.
Thanks a lot in advance. And hope to contribute soon.
kfluk
anyone pls give some hint. thanks
kfluk,
I want Chinese support as well, but I want to keep the original rom for warranty and so on. But I am thinking of installing CE-Star V2.8 - would that not be sufficient for you? It gives trad/simp chinese, Japanese, pinyin and 7 other input methods, should be fully integrated in WM5/6 ...
CE-Star add additional overhead to the system. WM6 itself is MUI enabled, just add corresponding language will allow it display different language.
I planned to make few version of ROM when original ROM backup work.
kfluk said:
Hello,
I follow several instruction to create a backup of CHT ROM before flash WWE ROM or cook WWE + Chinese support ROM.
The ROM is not test because I am afraid brick my device. Is there any expert here can tell how could I recover from brick if the CHT ROM won't boot?
I think it can follow pof's instruction here: http://forum.xda-developers.com/showthread.php?t=334678
But what if the CHT ROM already damaged?
Base on procedure below, is my ROM working?
In short, my procedure is as below:
1. Create dump of ROM by use pdocread.
2. Get part02.raw
3. Get RUU_Signed.nbh from Cooked ROM and use NBHextract to get 03_OS.nb
4. Run (from Imgfs v2) NBDumpKaiser.bat to dump ROM
5. I don't add/remove item at the moment because want to get complete original ROM
6. Run NBBuildKaiser.bat to build 03_OS.nb
7. Use Dark Simpson tool to create RUU_Signed.nbh
8. Replace RUU_Signed.nbh in Cooded ROM at 3.
Thanks a lot in advance. And hope to contribute soon.
kfluk
Click to expand...
Click to collapse
Hi Kfluk,
You sound like an expert to me already. At least, you know what you are doing with those "professional tools" to due with those nbh files.
I bought my Kaiser in Hong Kong, and I dumped the ROM into 4 different RAW files. I flashed my Kaiser with the HTC standard english ROM, and it works terrific for me. To support Chinese, I use CE-Star. It works fine to me me cause I don't always use Chinese. Yes, with CE-Star activated, the performance seems slower. I am trying to find a way to deactivate it if I don't need it.
With the 4 RAW files, I am finding a way to make it a executable file so that if I need to restore, I have a much simplier way. If you happen to know how to do it, please let me know.
I think I have a complete Chinese dump ROM from my Kaiser, if you want a copy, please let me know.
Hey guys,
I am not an expert and I can't give any advices...I just SPLed my CHT device and flashed to English already.
I do believe that there will be some CHT ROMs in the future.
Cheers,
I own a Tytn II and extract raw ROM out and re-package to a ROM image. While not brave enough to test it with my device.
I cannot test it until I am sure how to recover from brick when the ROM is not working.
There are many expert here provide a lot of information for rebuild a ROM. I think it should able to find out how to recover from brick.
Will test this procedure soon.
http://forum.xda-developers.com/showthread.php?t=336158
In case work, I can start to cook a chinese dish.
kfluk said:
Hello,
I follow several instruction to create a backup of CHT ROM before flash WWE ROM or cook WWE + Chinese support ROM.
The ROM is not test because I am afraid brick my device. Is there any expert here can tell how could I recover from brick if the CHT ROM won't boot?
I think it can follow pof's instruction here: http://forum.xda-developers.com/showthread.php?t=334678
But what if the CHT ROM already damaged?
Base on procedure below, is my ROM working?
In short, my procedure is as below:
1. Create dump of ROM by use pdocread.
2. Get part02.raw
3. Get RUU_Signed.nbh from Cooked ROM and use NBHextract to get 03_OS.nb
4. Run (from Imgfs v2) NBDumpKaiser.bat to dump ROM
5. I don't add/remove item at the moment because want to get complete original ROM
6. Run NBBuildKaiser.bat to build 03_OS.nb
7. Use Dark Simpson tool to create RUU_Signed.nbh
8. Replace RUU_Signed.nbh in Cooded ROM at 3.
Thanks a lot in advance. And hope to contribute soon.
kfluk
Click to expand...
Click to collapse
ey man, you must be care to have HardSPL (don't use SSPL) to unbrick your Kaiser if the flash goes bad....
Second one, the process you describe to get a ROM from dumped raw files is good (you don't need to dump the ROM for backup purpose), you can see this other one i post yesterday http://forum.xda-developers.com/showthread.php?t=337066 to compare with yours.
Regards.
I am using ATT tilt now, but I want to flash original HTC kaiser english Rom which does not support chinese(T/S), is there anyway you can put chinese code plugins into HTC kaiser english rom?
I am a newbie on WM phone, so i want to hear more from you guys who want to keep original kaiser english ROM and want it supports (T/S)chinese input without cestar.
Yes.. anyone can use the part02.raw to create a chinese cab? I've seen somebody did that on other device before. By the way, CE-star is great to just viewing chinese in WM6, but if you try to write, it will screw up and need to soft-reset.
hi jcespi2005,
I already flash HardSPL to my kaiser for preparation.
but if my CHT ROM not working after flash. is it mean I can recover with HardSPL? or use MicroSD flash method? I stopped because can't find recover method.
My ROM is unlock CHT version from HTC. So I want to backup in case need return for repairing. I have a question, why do you think I don't need backup ROM?
For the ROM re-construction. I read your post and many other for reference when I start learn how to cook ROM.
thanks for your work and comments.
hi ronan_zj,
To add chinese sip, pls read this thread. It describe how to use CHT input in WWE ROM.
http://www.studiokuma.com/wm/?section=support
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Waiting for your good news!
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Looking forward to hearing your good news. Could you upload your "masterpiece" once finish? I think I can stop working my own ROM, seems i can never get it done.
how about English ROM with T/S chinese cab?
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Great
When you finish, post the upload link to updete my post with all the reconstructed ROMs made by ppl.
Cheers.
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Please let us know when you are done. I have a friend in Taiwan that will get a Tilt soon (very my help as HTC sell Kaiser for over 800 in Taiwan) and Chinese support is a must for him..
L8
species8472_rules said:
Please let us know when you are done. I have a friend in Taiwan that will get a Tilt soon (very my help as HTC sell Kaiser for over 800 in Taiwan) and Chinese support is a must for him..
L8
Click to expand...
Click to collapse
Hello L8,
The re-constructed ROM has some problem. After flash, it does not boot correctly. I am using WWE ROM now. Will try to figure out what's wrong.
kfluk
Taiwan CHT rom dump is required...
Despretly need a CHT rom of a Taiwan Kaiser... Can somebody who owns Kaiser from Taiwan dump the rom ? and provide the parts of a complete Rom Dump?
I bricked my device and it is unlocked and I need a Taiwanies rom to recover.
Hi there
For the moment I haven't found a french 6.1 rom that suits my needs.
So I was wondering about starting cooking. But in fact there are WWE very good roms and I was wondering if it is possible to translate a ROM that way
1. extract the OEM_Lang_*** folder from the official HTC french ROM
2. extract a WWE ROM (of course with the authorization of the cooker !)
3. replace the OEM_Lang folder
4. re-cook the ROM & flash
Thank you for your help
Greg
PS : I found the thread dealing with translating with emulator files but for now there are no localized emulator files for wm 6.1
gregouille said:
Hi there
For the moment I haven't found a french 6.1 rom that suits my needs.
So I was wondering about starting cooking. But in fact there are WWE very good roms and I was wondering if it is possible to translate a ROM that way
1. extract the OEM_Lang_*** folder from the official HTC french ROM
2. extract a WWE ROM (of course with the authorization of the cooker !)
3. replace the OEM_Lang folder
4. re-cook the ROM & flash
Thank you for your help
Greg
Click to expand...
Click to collapse
Which program can you extract the OEM_lang_*** folder from the WWE rom??
piedone said:
Which program can you extract the OEM_lang_*** folder from the WWE rom??
Click to expand...
Click to collapse
by now i don't know... only wondering if it is possible !
maybe with kaiser kitchen or install then dump a french rom...
that is the question
i'm no expert being that i only got in the kitchen a month ago, but from what i can see your steps make sense. i'm not one hundred percent sure that it will work but i would say try it, dump the WWE rom, so long as you are not releasing it as a new rom the chef will have no problem, and then do as you said. replace OEM_lang_*** with the folder from your french ROM. whether it works or not post the results, i kinda want to see what happens. you might also be able to ask the chef of the WWE rom that you want to use if he knows how to do it.
you also need to replace the *.mui in the sys folder.
gregouille said:
Hi there
For the moment I haven't found a french 6.1 rom that suits my needs.
So I was wondering about starting cooking. But in fact there are WWE very good roms and I was wondering if it is possible to translate a ROM that way
1. extract the OEM_Lang_*** folder from the official HTC french ROM
2. extract a WWE ROM (of course with the authorization of the cooker !)
3. replace the OEM_Lang folder
4. re-cook the ROM & flash
Thank you for your help
Greg
PS : I found the thread dealing with translating with emulator files but for now there are no localized emulator files for wm 6.1
Click to expand...
Click to collapse
Your problems are:
1. you must looking for a chef that shares with you own cook (very very difficult)
2. you must looking for packages (very difficult)
3. you have to change also *.mui in \Sys dir (as have told you xtreme_g)
4. you have to modify also RGU in some \OEM dir
Then you can rebuild and cook. You can use the ervius+bepe's package tool.
Good luck
Hi there,
is it possible to create a German WM 6.1 ROM with DIY? I already cooked some ROMs for testing, but I wasn't able to change the language.
As base for my tests I used:
Pharos_WWE_ROM_5.2.20270_19960_.by.poldo
and
Original German ROM, which was dumped here in another thread
There is this directory:
\Build\OEM\OEM_Lang_0409
So do I have to replace the files in there? But where can I find the German language files?
Another thing: DIY comes with some tools that I can cook into the ROM. But what if I want to cook e.g. Advanced Config 3.1, which is not included by default in DIY?
i have no idea ... wish i could help because id like to know how to do a rom in dutch.. and the other question is also very valid! how do we cook in an application?
Hi all
I want to build a french WM6.1 rom
but I don't know how I must do?
there is 2 different way :
- translate poldo's or tom's rom in french. HOW?
- build my own rom with WM6.1... does Just changin SYS fiolder is good?
thx
...no, you must work with the OEM folder too
Pratically you need to change all MUI files (0409=eng) with french (040c), but its not a good metod for me and its difficult to find a "dumpable" not-official ROM... try to dump Tom codon's Pharos ROM and tell me what happens...
The best way for the SYS folder is to port it from another device... there is a great tool called g'reloc for relocation modules in according to your device, so you can dump a wm6.1 official french ROM from Diamond and port the SYS folder to your Pharos
For OEM folder you need to dump your original ROM
I suggest you to read carefully some tutorial on how to port SYS folder and how to dump your original ROM
bye
thanks for your great answer