Related
So i try to upgrade my rom with an official tmobile rom, i've got the mda mini, and it didn't work, it stopped midway saying that an error occur while upgrading the radio stack, now i try different rom, different download of the same different rom, nothing seem to work, it alway stop at 20% of the radio upgrade and tell me that an error occur and that i have to reboot my device and try again, i search many hours on the forum to see the same problem, but i found nothing, is my mda dead, i kinda like it very much, so small, so cute with a winamp skin on the player it was putting a shame to every i pod i know off,
please I'm begging you, help me revive my poor Mda, i even bought a bluetooth stereo head set just for it, too enhance the ipod killer theme.... tell me i didn't do this for nothing !!!!
thank you
I guess it's realy dead
oky, no more chance for this poor mda,
I will have the ceremony down tonignt then i will burn it and spreed the ashes over internet.
Sigiel said:
oky, no more chance for this poor mda,
I will have the ceremony down tonignt then i will burn it and spreed the ashes over internet.
Click to expand...
Click to collapse
Bad news, my PDA likes yours, it cannot flash any rom now...
It's possible to revive them...but you'll need a special SD Card Image ROM...
Google a little bit about .nbh images, SD Rom Boot images, etc.
Once you have this special SD Card ROM Boot image prepared, you put it on the phone, put the phone in bootloader mode (camera + power + reset),and check the screen: - a message will appear telling you to "press power to flash", and you do it. Let it flash and reboot.
Magician revived.
Best Regards,
Keeper
Keeper said:
It's possible to revive them...but you'll need a special SD Card Image ROM...
Google a little bit about .nbh images, SD Rom Boot images, etc.
Once you have this special SD Card ROM Boot image prepared, you put it on the phone, put the phone in bootloader mode (camera + power + reset),and check the screen: - a message will appear telling you to "press power to flash", and you do it. let it flash and reboot.
Magician revived.
Best Regards,
Keeper
Click to expand...
Click to collapse
The file header of the SD Card ROM must be the same of my magician ROM, isn't it? Now the problem is I can't get the header of my magician ROM, when I use "d2s" command the magician dead.
Well i don't quite get what you mean by "header of Magician ROM"....i assume that you are refering to the bootloader...what version do you have? Does it says 1.2 or 1.0? Have you tried to flash a different bootloader from a different model or something?
Anyway, I don't quite get what is your problem exactly - Is it with the Radio part or windows part? Does the WM2003se boots or not ?
- If your problem is only with the WM2k3 not booting, then you must upgrade only with a ROM image for the OS (nk.nbf) - (Try and use an original ROM first...don't you use cooked ROMs.)
- If it's both WM2K3 and radio, then you need to put the nk.nbf and radio_.nbf on the same directory where the MaUpgradeUt.exe is.
- If you also want to upgrade your Extended ROM, then beside both files mentioned, you also need to have the ms_.nbf.
Anyway, regarding the radio part: try this: google for "MagicianRadio_1.13.00_maupgrade"
Finally: don't forget that you need to download and use the "MaUpgradeUt_noID.exe" or the magician will complain about the country code error + some BS.
Best Regards,
Keeper
I heard that the front 416 bytes of SD card ROM image must be the same as the PDA, and then can falsh it. The front 416 bytes of every PDA ROM are different, so I must get my magician ROM header (416B), but I cannot.
My magician can boot, but cannot be flashed a new rom. The error code returned to me is "Get Device Data Error".
btw, the bootloader is v1.02, how can I reflash a new bootloader? I don't know how to do that, maybe it can resolve the problem.
Forget about changing the bootloader - you could end up with a brick on your hands...besides, that's the latest (final?) version of the bootloader for magicians.
Anyway, that message seems to be related to usb data transfer between your pc and your phone...you DID disabled the "Allow USB Connections" on ActiveSync BEFORE TRYING to do an upgrade, didn't you?
If you use windows Vista, there's a known problem when trying to flash a new ROM with it...
check this link on how to use vista for ROM upgrades: http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
Best Regards,
Keeper
My system is Windows XP, thank you all the same.
Okey, try this:
1) Download this image: http://www.t-mobile.nl/zakelijk/media/download/MA_TMNL_11300_132_11200_Ship.exe
(It's an original image from T-Mobile).
2) Extract the .exe content using winrar.
You will get the following files:
- EnterBL.exe
- GetDeviceData.exe
- RUU.dll
- RUU.conf
- UI.dll
- ROMUpgradeUt.exe
- nk.nbf
- ms_.nbf
- radio_.nbf
3) Delete the ms_.nbf, radio_.nbf and ROMUpgradeUt.exe files.
4) donwload this file: ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe ...and put it on the above directory.
5) disable ActiveSync "allow usb connections".
6) put your phone in bootloader mode
7) run MaUpgradeUt_noID.exe and let it finish. (It may take some time...)
8) hard reset your phone.
Now, if you want to try to upgrade just the radio, repeat the above steps but delete the nk.nbf from that directory and and put a radio_.nbf there.
NOTE: You WILL loose everything that you've got stored on your phone...contacts, sms, etc...so do a backup 1st if you want.
Regards,
Keeper
It not worked. The RUU.log is this:
00:01:01:890 [msg] : Version : [1.5.0].
00:01:01:890 [msg] : Config Info : [776571],[1],[1],[0].
00:01:01:890 [msg] : RadioFile Not Exist !
00:01:01:890 [msg] : MSystemFile Not Exist !
00:01:05:703 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
00:01:09:828 [msg] : Disconnect ActiveSync .... [2]
00:01:09:968 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
00:02:48:281 [err] : BL Get Device Data Error.
00:02:48:281 [msg] : Update Image. CE : [4], MSystem : [0], Radio : [0]
I clicked "Upgrade" and it displayed "checking the information of your device..."...
Okey...the only way i see it, is to try an SD Card Upgrade.
I can try and craft you an image for your SD Card but i don't know if it will work on your SD Card... What's the size(s) of your SD Card (s)?
I don't want to e-mail you 1Gb image (i only have 1 and 2Gb SD Cards) and has so i need to do this ( http://buzzdev.net/index.php?option=com_content&task=view&id=18&Itemid=41 )...which i've never tried...so let's hope that the SD Card header won't be a problem...
Anyway, i can't do it now...i'll pm you later on, when i get some free time.
Regards,
Keeper
Thank you.
I have a 2 GB SD Card, but it didn't work, I think the reason maybe the header of the SD Card Image not modified. But I cannot get the header of my PDA.
Okey, here we go.
Do this:
1) Download this Emergency SD Card image: http://rapidshare.com/files/56985459/Emergency_SD_Card_Image.rar.html
2) Download the NTRW in attachment
3) Format your SD Card using windows XP format option
4) Copy both files (ntrw.exe and SDCard.img) to your C:\
5) Open a dos command prompt and type: ntrw write SDCard.img <sd card reader drive letter>
( do note that <sd card reader drive letter> must be replaced with your own SD card reader drive letter...example: "ntrw write SDCard.img e:". Also do note that when writing to the SD Card, some errors might appear...ignore them...the image is/will be there in your SD Card)
6) Put your phone in bootloader mode
7) Connect the usb cable or power cord to your phone (This is a MUST! or you won't see the next step)
8) Insert the SD Card on your phone and check if the screen message changes to something like " Press power to flash "
9) Do has told: press the power button and WAIT! (if it seems to stop, leave it that way...it will eventually end the upgrade)
10) Hard reset your phone when the upgrade ends.
Note 1: This SD image and procedure was tested on my phone and it works. The image itself is an original T-Mobile ROM 1.13.
Tell me how it went.
Best Regards,
Keeper
Happy to hear you again. But I cannot download the image. I will try.
I do this step by step, but after I inserted the SD Card on my phone, the screen message didn't change, it was "USB V1.02", if I disconnected the usb cable, it changed to "Serial V1.02".
It can't be...This image is in perfect shape. you must be doing something wrong or your bootloader is damaged seriously...
check this out:
- Your USB cable must be connected to your PC and ALSO to the Magician.
- Check if ActiveSync USB option is disabled.
- If both of the above are true, leave the SD Card inside the mini, and press camera + power + reset button again...(i've read that sometimes the process doesn't work at the first time...)
- Try to disconnect and connect the USB cable from your magician, with the SD Card inserted on the phone...check is the message on the screen changes...
Please post what you have tried already...
If nothing works, that means that your bootloader is f* up. You'll have to wait a little bit more so to give me time to check how to prepare an SD image (or an alternative way) for upgrading your bootloader.
Keeper
It not worked.
I just did as what you said. If I pressed camera + power + reset button with the SD Card inside, the screen was not changed even if I connected / disconnected the usb cable; but if I pressed camera + power + reset button without the SD Card inside, and inserted SD Card under bootloader mode, the screen can change from "USB" to "Serial", but I didn't see " Press power to flash ".
I think my Magician bootloader was corrupted, because the screen showed nothing after I typed "d2s" in MTTY. But I don't know how to upgrate bootloader.
Thank you very much.
Now I find a new problem: I couldn't delete some fonts files stored in "/storage/fonts", even if I hard reset PDA. After I setup a new font named QooQooCN, I cannot uninstall it, seems wince.nls running. But I still cannot delete /storage/fonts/*.ttf files. Why? If this is the reason why I cannot reflash my PDA?
Need help.
Coly, here it is the 1.02 bootloader from my device. Put it on your formated sd card like explained previously. Reboot in bootloader mode with the sd card inserted and with the USB cable connected...see if now you can get the "press power to flash"
If it still doesn't work, we will have to crack the passwords for the bootloader debug mode.
anyway, post your results, please.
Keeper
This is a patched SPL for HTC Elf devices (HTC Touch / HTC P3450 / Dopod S1, o2 Nova, etc...).
This SPL is based on original Elf 1.11 SPL but includes 3 patches:
g_cKeyCardSecurityLevel = 0 (set 32)
Does not check Model ID
Does not check signature*
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them.
This means you can flash ANY ROM to your Elf after flashing USPL on it, no need to pay for CID unlock anymore!
Disclaimer:
This is free to use but at your own risk, I take no responsibility for any conflict, fault, or damage caused to your phone by this unlocking procedure. No warranties of any kind are given. Any commercial usage prohibited.
Instructions:
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run elf-uspl.exe on your computer and follow instructions on screen:
Code:
*************************************************************
Please make sure Activesync is enabled (green icon in systray)
and hit ENTER to start...
STEP 1/3......50%......75%....100%
The next step will load a patched bootloader (SPL) on your device
it will make your device temporary SuperCID (seclevel=0), and will
avoid modelID and signature checking when flashing NBH files.
Hit ENTER to continue...
STEP 2/3.....15%.....25%...50%...75%.....100%
Phone screen should now be blank and the activesync icon gray
if not, the loading procedure has failed and you'll have to repeat again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash patched SPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash the patched SPL, when this
step completes your device will reboot.
STEP 3/3 - Launching RUU, please wait...
Process is finished, congratulations!
If you find it useful don't forget to donate :)
*************************************************************
(c)2007 pof - XDA Developers
Hit ENTER to quit.
Update:
Some ROMs (specially O2 Nova) don't allow to run unsigned applications by default and some people have reported difficulties installing USPL. If you see a popup asking to run unsigned code, you need to rapi-unlock your phone manually, to do this download enable-rapi.zip and follow the instructions inside the file prior to installing USPL.
Notes:
1. I have only tested under XP, people says it works on Vista too.
2. Unzip the file, do not run it on the zipped folder. (Note: Better to unzip in c:\ folder with no spaces on the name).
3. This will only CID unlock your device, not SIM unlock.
4. On some devices STEP 2 fails the first time, just hit CTRL+C, softreset your device and start over again.
5. To create NBH files for Elf you should use HTC Rom Tool by Dark Simpson, because "nbhgen" doesn't create proper NBH files for elf.
6. You can use Artemis splash screen tool by jcaron safely on the Elf, the Artemis RUU is compatible with Elf-USPL and both devices have same splash screen format.
7. After flashing a full ROM (containing a SPL on it) you'll overwrite USPL, so you'll need to repeat the USPL flashing process again.
8. If you like it, use the paypal donate button on my signature
Enjoy!
UPDATE (thanks Noonski)
TO AVOID BRICKED ELF BE SURE TO CHECK THIS THREAD:
http://forum.xda-developers.com/showthread.php?t=320155
So new users can first check if their Shipped rom is around before taking the decision to flash USPL.
Also this makes them aware to submit new ones to the list.
And if they Get stuck with a 270 Error at 3% without actually having an original, it was they that made the decision themselves.
Thank you so much! Free CID unlock finally!
Congratulations!!!!
Work in HTC Herald ???
[]s FerSoft
fersoft said:
Work in HTC Herald ???
Click to expand...
Click to collapse
No, this one is only for Elf, but I'll publish a version for Herald soon, its on testing phase
Execellent and will try it right the way...thanks a million....
i did not get what you are saying
This will only CID unlock your device, not SIM unlock
can you please explain me in simple words after after using this tool on my HTC Touch can i use the sim from different service provider
Cool! I finally could update my Spanish Elf to the latest Dopod Asia ROM (WWE)
Thanks!
Greate! I just flash it successfully!
BTW:
pof:How can i flash the device that can not boot? my friend's device only boot in 3-color mode.
Great.. Thank Pro :-*
arifdreamworldera said:
i did not get what you are saying
This will only CID unlock your device, not SIM unlock
can you please explain me in simple words after after using this tool on my HTC Touch can i use the sim from different service provider
Click to expand...
Click to collapse
in simple words: No
there are two different areas in the ROM.
One regarding CID and one for SIM-Lock.
Works perfect in Windows Vista Ultimate 32bit.
Thx pof!
THNX!!!!
THANX a lot pof!!!
You will get a donation from me!
(as I promised here for Excalibur)
Am I right that I can also backup my original ROM and flash it back with that tools?
Thanks And Working Fine With Me .
Great job pof
Oh that's great news for all users HTC Touch,thanks a lot.
This is fantastic! Thanks pof!
Took me 3 attempts, but it worked out great (Vista didnt work though, XP did the third time )
Edit: My dutch Touch, is now a WWE Touch! Thnx again pof. Awesome work.
No success
I went through steps 1 and 2. Then started the RUU with the ELFUSPL hack from pof. But it always gives me the message "[270] UPDATE ERROR" and "Image file is corrupted". I downloaded it again from pof - no change.
Now I wonder if:
1. Is it ok if the ActiveSync icon remains gray (not connected) after the step 2 and during the step 3?
2. Is this method not appropriate for O2 Nova (German)?
Don't know what to do now. Would anyone be so kind and give me any hints, please?
----------------
O2 Nova, German version
How can i see my default settings ?
CID locked or CID unlocked ?
Or all Touch CID Locked default ? ( and i need this flash if i have upgrade "any" rom )
Thx all of your answers !
Follow the steps on the wizard to flash the patched SPL, when this
step completes your device will reboot.
Click to expand...
Click to collapse
this must be a typo then
thanks for sharing the information !
I dont think its a typo. The wizard regards the setup wizard, which is the series of checklist that you go through to get to the end desired result.
Kaiser Sim Unlocker v0.1
========================
Brought to you by jockyw2001
(c)2008 jockyw2001
You definitely save money by using this unlocker, so consider a donation for me to keep the R&D going
Click here to send your PayPal donation.
Download links:
Rapidshare
Megaupload
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Note for Vista users
===============
This guide will explain how to change your drivers to the xp. You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
(The instructions below take preference since they are more current than the readme in the package)
1. To verify you have installed the right HardSPL do this: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here.
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
Note that you can also skip step 6. and proceed with step 7.
6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
7. Once Windows Mobile has booted up it will (usually after you have entered the usual 4-digit PIN) show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
8b. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
8c. right-click activeync icon and check "Allow USB connections" from Connection Settings
You should see this:
Code:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email][email protected][/email]
Your Unlockcode = 12345678
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
Note: If you skipped step 6 then you should now also skip step 9. and continue with step 9x
9. Once Windows Mobile has booted up it will again show the "Simlock" window. When prompted (usually immediately after you have entered the usual 4-digit SIM PIN), enter the the 8-digit unlockcode and your phone is permanently SIM unlocked
Now proceed to step 10.
9x. (Only if you skipped steps 6. and 9.): Run \windows\simlock.exe on your Kaiser and enter the 8-digit unlockcode when you are prompted.
In order to see simlock.exe you have to open file explorer then click menu > and show all files. If you can still not find simlock.exe copy the attached one to the phone's "My Documents" directory and run it from there.
10. Download the original radio from here to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to some other great tools which I will release soon: "Kaiser SuperCID" and "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW
Credits
=======
* Tom Codon and unkown for testing
* des, pof and olipro for SSPL and HardSPL
* arc and all the other great minds at XDA devs
* viperbjk, adfree and all other QC hackers at Modopo
* PURESKILLZZZ for supplemental instructions here
(c)2008 jockyw2001
[email protected]
Jan 19th 2008
Thanks jockyw2001... trying now, will post feedback
Thanks! Appreciate it: I thought it was just a hype, trying....
Just unlocked...Thanks!!
WoW! Great job JockyW!!!!
Will try it out when I get home!
Nice works my friend...!
Keep up it and don't forget supporting niki device
great great and greater
il conna try it by first daylight thanx and great affoert regards
Great!! Thanks!! Keep up the good work!
gonna try as soon as my battery is over 50%.. will post result
THNX MAN
Instructions followed to the letter here and no dice. At step two i get an error, it reads: "\\.\WCEUSBSH001: No such file or directory cannot connect"
Any help would be appreciated, my OS is Vista Ultimate x64.
kamikaze_decoy said:
my OS is Vista Ultimate x64.
Click to expand...
Click to collapse
Bug detected !!!
Can it apply to all models? such as UK...Thanks...
kamikaze_decoy said:
Instructions followed to the letter here and no dice. At step two i get an error, it reads: "\\.\WCEUSBSH001: No such file or directory cannot connect"
Any help would be appreciated, my OS is Vista Ultimate x64.
Click to expand...
Click to collapse
See if u can find a PC with XP
I stay far away from Vista and never tested it on Vista.
But maybe this helps.
bwqipzbpd said:
Can it apply to all models? such as UK...Thanks...
Click to expand...
Click to collapse
Yes, and goodluck!
Can I use different radio since my original radio is not available for download (my original radio is 1.27.12.29) ?
I use a Kaiser on the UK Orange and I have flashed my phone to Dutty's Rom.
Thank you so much.
Im a UK Orange user. When I spoke to HTC a few months back, the guy I spoke to suggested that Orange are actually using a modified version of the radio rom.
Has anyone using a Kaiser on the UK Orange tried a different radio rom?
Or has the UK Orange radio rom actually been dumped, so we can upload go back to it after unlocking our "beautifully powerful phone"
benz710 said:
Can I use different radio since my original radio is not available for download (my original radio is 1.27.12.29) ?
Thank you so much.
Click to expand...
Click to collapse
You can, but each radio has it's pros and cons. Maybe you should wait until I release my radio dumper. No release date for it yet, but I think in 1-2 wk
i have a question on last step where u have to flash back your radio in "step3 folder", for example, if i need to flash back KAIS_Radinly_1.27.12.17_CustomRUU, but in this zip file has CustomRUU.exe and RUU_signed.nbh, should i put this two files in to "step3 folder", and then click on KaiserCustomRUU.exe (step3 folder). OR it doesn't matter which *.exe files i click, because they are same files, but different filename.
waichai said:
i have a question on last step where u have to flash back your radio in "step3 folder", for example, if i need to flash back KAIS_Radinly_1.27.12.17_CustomRUU, but in this zip file has CustomRUU.exe and RUU_signed.nbh, should i put this two files in to "step3 folder", and then click on KaiserCustomRUU.exe (step3 folder). OR it doesn't matter which *.exe files i click, because they are same files, but different filename.
Click to expand...
Click to collapse
If KAIS_Radinly_1.27.12.17_CustomRUU is a .exe then delete KaiserCustomRUU.exe and run KAIS_Radinly_1.27.12.17_CustomRUU.exe
Hi,
On Step2 it give the error:
\\.\WCEUSBSH001: Permission Denied
cannot connect to \\.\WCEUSBSH001
I'm using XP SP2.
Any sugestions ?
jockyw2001 said:
If KAIS_Radinly_1.27.12.17_CustomRUU is a .exe then delete KaiserCustomRUU.exe and run KAIS_Radinly_1.27.12.17_CustomRUU.exe
Click to expand...
Click to collapse
jockyw2001,
is that mean i don't have to use file in "step3 folder" file?
I accidentally put The Orange SPV E650 ROM onto my unbranded HTS S710 instead of onto my SPVG E650 and am now unable to Flash it with the WM6.1 ROM that I had on in the past. SDA Application unlock says that the Phone can not be unlocked, does anyone know how to enable me to re-flash WM 6.1 onto my Vox?
Roland
exactly same happened to me, tried best but failure, had to take service center and pay 500 INR to get rid of this.
I am assuming you didn't flash uSPL to the device? You should be able to reflash it with an official ROM, uSPL and then your 6.1 ROM.
That is because the ROM of SPV E650 needs more steps to unlock it
I also have had experience with this ROM and found below steps to unlock it
1- Copy SP_AllowCertificateInstall.cab to your phone, Install it & reboot
2- Connect your phone to your pc with active sync. Click on SDA_ApplicationUnlock, reboot
3- And install PHMRegedit.cab to the phone. Open this Registry Edit and
navigate to HKLM\Security\Policies\Policies\
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Reboot device.
4- Now you can flash your phone with any ROMs (follow normal steps as instructions)
Just in case your phone still cannot be unlock, open Registry Edit and follow this
1- Navigate to HKEY_LOCAL_MACHINE/Security/Policies/Policies,
2- Value, Menu : New Value, DWORD, Value name : 0000101b, Value data : 1, Base : Decimal, Value type : REG DWORD,
3-Done. Reboot your phone
4- Flash with your favorite ROMs
Above is my experience with my 2 phones (Orange SPV E650 & HTC S710). Use this instructions at your own risk !
Good luck !
That Worked nicely, just app unlocked my S710 and flashed USPL to 1.35 and applied the IPL 1.35 patch.
Roland
Hello to all.
I want specially thank all of you, because I don't remember names that hels me with their solutions during my chaos. (I read houndreds of thousand pages since 41 hours).
Well my situation was:
I bought my HTC Desire S from Vodafone Turkey.
Android: 2.3.3
HTC Sense: 2.1
Main Version: 20.28I.30.085AU_3805.06.02.03
Build Number: 1.47.468.2
It was S-offed.
41 hours ago, I thought that I must(!) flash new RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed...
But something went wrong and I'm stucked on Bootloader with nothing.
I had no GoldCard, no official ROM from Vodafone Turkey (it should something like
RUU_Saga_S_TUR_1.47.468.2_Radio_20.28I.30.085AU_3805.06.02.03_M_release or something)
I had only my Nandroid Backup and OTA-Update for 1.47.468.2.
All of my attacks with fastboot turns without anyresults. I only got same Error "CID Incorrect" with RUU or PG88IMG.zip installations
Firstly I had to find a working Goldcard. That could be the only working method...
Today morning. I read in a forum from a different android site (for an another HTC Phone)that if we have a working WinMo device, we can prepare a GoldCard...
Here is the method for a Goldcard,if you don't have an another Android machine to use and your HTC Desire cannot be controlled with adb commands:
1. Find a working WinMo device (mine is HTC Touch HD)
2. Download RevSkills from its own site
(http://psas.revskills.de/?q=node/6)
3. Get a SDCard <4GB (not a SDHC, only a SD Card can be very chip one, too)
4. Put your SDCard to WinMo
5. Run RevSkills (just run. Should not be as Administrator)
6. Open Menu-Calculators/Generators/HTC Goldcard
7. Than push Get CID from WINCE Device. So you will get CID of SDCard.You will not need Reverse CID, but just in case of get it, too.
8. Go to Free GoldCard Generator site (http://psas.revskills.de/?q=goldcard)
Put your SDCard CID in the blank line (important: do not use reversed do not change first 2 letters as 00). Choose your GoldCard Type as Android and push Download Goldcard! button.
9. Download your Goldcard.img to PC
10. Remove your SDCard, find a SDCard Reader,Format the SDCard as FAT32/4096
10. Download HxD HEX Editor from anywhere (you can find it with googling)
11. Run HxD as Administrator
12. Under Extras choose Open Disk and that choose there Removable Disk (att: uncheck open read only checkbox)
13. Under Extras choose Open Disk Image and find your Goldcard.img from downloaded place on your PC (opens a dialog box, just push OK)
14. In goldcard.img Edit/Select All/Edit/Copy
15. Go to removable disk choose from 000 to 170 (included) and Edit/Paste Insert
16. Save it
17. For controlling remove SDCard and insert again.
If you can see your SDCard on Windows Explorer means everything is OK
Here is the method to flash a RUU again.
1. Put your GoldCard SD to HTC Desire S.
2. Go to bootloader with Power+Volume Down
3. Choose Fastboot.
4. In my case I used
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
because I had before a 1.47.468.2 ROM
with 1.28.401.2 probably you will get an error message number 140...
After 10 minutes I've gotmy HTC Desire S back and alive...
Again I want to thank all of XDA-Developers member for their brilliant helps...
PS: If you want you can use your Goldcard as a normal SDCard, because it will stay always as GoldCard. It is not important you format it again or not.But I prefer to keep it in a safe place,just in case of emergency
I had the same issue after flashing radio on my Desire S. It was stuck at bootloader.
Remove SD Card, then boot the phone as normal, once booted remove the corrupt radio from SD card and you should be good.
Hey,
Dude also my phone is opening only bootloader and S-ON. I am not able to find windows mobile phone. My cid is same with yours. Can you share your goldcard?
Thanks.