Related
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
Hi!
Just purchased my Dopod C730 today, its China Mobile Branded, but since i'm going home in June I might aswell get rid of the China mobile branded firmware. I downloaded the New Guava ROM 1.0 and tried to update the phone but it said corrupt image.
I use to be kinda good at this stuff but 6 months in Shanghai with that polution might have set me back
Anybody that can provide me a guide or some update that will work? I need a clean firmware without chinese language.
Thanks for your help!
I think if you did not already done, try to download again the file.
And follow the step on "How-To" txt file included on the folder you have downloaded.
I would say you didn't app unlock and you didn't do uspl. Everything in the readme file!
frauhottelmann said:
I would say you didn't app unlock and you didn't do uspl. Everything in the readme file!
Click to expand...
Click to collapse
You are correct But I seem not to find the USPL.bat, only USPL_116_jockyw. When I try to run that, it says "No Application associated with uspl_116_jackyw. Run the Applicatioon first then open this file inside the application". The App unlock said phone unlocked.
Marcbis said:
You are correct But I seem not to find the USPL.bat, only USPL_116_jockyw. When I try to run that, it says "No Application associated with uspl_116_jackyw. Run the Applicatioon first then open this file inside the application". The App unlock said phone unlocked.
Click to expand...
Click to collapse
The name of file is "uspl_116_jockyw.bat"
So had the extension of the file if they are not hide...
lerameur said:
The name of file is "uspl_116_jockyw.bat"
So had the extension of the file if they are not hide...
Click to expand...
Click to collapse
Yes, but it won't run
did you unrar the file?
did you try to download again?
lerameur said:
did you unrar the file?
did you try to download again?
Click to expand...
Click to collapse
Yes, i unrared it.
I have tried two different versions, the one bundled with the ROM and the orginal one.
Very strange, i can't hard-reset at all. I've run the Security Configuration Manager fra Microsoft said that Security should be off. Still it says no to running the bat file.
Today, I am a happy little boy. Apparently I (big surprise) did it all wrong. My phone is currently booting for the first time Thanks for the help from you two guys
Edit:
Ohh this is soooo sweet compared to the China mobile setting, only bad thing is that I can't see chinese characters. But i can live without it
Marcbis said:
Today, I am a happy little boy. Apparently I (big surprise) did it all wrong. My phone is currently booting for the first time Thanks for the help from you two guys
Edit:
Ohh this is soooo sweet compared to the China mobile setting, only bad thing is that I can't see chinese characters. But i can live without it
Click to expand...
Click to collapse
If you want Chinese characters then try this ROM. It is better than any WM6 ROM.
http://forum.xda-developers.com/showthread.php?t=381094
Roland
Rolandh said:
If you want Chinese characters then try this ROM. It is better than any WM6 ROM.
http://forum.xda-developers.com/showthread.php?t=381094
Roland
Click to expand...
Click to collapse
Thanks, but im gonna stick with the english, my chinese characters is kinda rusty Im only gonna be here 2 months more and everyone writes in english. But thanks anyway.
But can anyone recommend a good GPS program?
China Mobile Dopod C730
how long does this black or kind greenish screen last? it has been there for almost 20mins, and i could see things like Vox ONBL and ruu
how long does this black or kind greenish green last? it has been there for almost 20mins, and i could see things like Vox ONBL and ruu
I really want to use dutty's new rom but I am having problems installing it. I have done a couple roms before and never had this problem. Currently I am using the q-mobile rom. I have tried 2 different XP computers. The problem is error 204 file not open. Activesync is connected to my phone, and is more than 50% battery. When I open up winzip I click on Kaiser_RUU.exe* and I go into the next screen that asks if my battery is more than 50% and such, then it says verifying information and BAM ERROR 204 can not open file. I tried downloading the ROM from mirror sites and still get the same problem. How can I fix this issue? Thanks
in bootloader:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
I tried using the L26 rom also and still get this problem.
any help would be appreciated, because this rom looks like it kicks some major a$$
try removing the usb cable and plugging it in to another port and letting a/s reconnect and then try flashing again.
TurboTsi said:
I really want to use dutty's new rom but I am having problems installing it. I have done a couple roms before and never had this problem. Currently I am using the q-mobile rom. I have tried 2 different XP computers. The problem is error 204 file not open. Activesync is connected to my phone, and is more than 50% battery. When I open up winzip I click on Kaiser_RUU.exe* and I go into the next screen that asks if my battery is more than 50% and such, then it says verifying information and BAM ERROR 204 can not open file. I tried downloading the ROM from mirror sites and still get the same problem. How can I fix this issue? Thanks
in bootloader:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Click to expand...
Click to collapse
unless I'm mistaken, you need to extract the files in a directory first then click the RUU exe file? I think it's looking for the nbh file because you directly clicked the exe file in the zip archive
pfcsabre said:
unless I'm mistaken, you need to extract the files in a directory first then click the RUU exe file? I think it's looking for the nbh file because you directly clicked the exe file in the zip archive
Click to expand...
Click to collapse
LOL, I didn't even catch that when I read it. Nice catch.
P1Tater said:
LOL, I didn't even catch that when I read it. Nice catch.
Click to expand...
Click to collapse
You're getting busy mate with the new moderator job, you need a rest
oh my god I'm such a noob!! haha I have no idea how I forgot to do that.....
I feel ashamed
Mod can you give me a week ban for being so nooby? lol j/k
I installed it and well first impressions are good.....
Thanks guys
As title says..
Can someone help? I tried running the Hard USPL Unlocker, if that's what it's called.
It didn't work
And for some reason, after I hard reset it, It doesn't go past the calibration screen..
Help?
Thanks in advance, cheers!
what was your method of flashing it? was it through the PC or SD Card?
XERO_Racer said:
what was your method of flashing it? was it through the PC or SD Card?
Click to expand...
Click to collapse
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
rossle12 said:
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
Click to expand...
Click to collapse
you can still access the phone? well try to redownload it and try again
http://forum.xda-developers.com/attachment.php?attachmentid=108649&d=1219714334
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
rossle12 said:
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
Click to expand...
Click to collapse
u meant downgrade? if i were you id stick to 6.5 its very stable and fast
and no problem, just post if theres anything wrong with it
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
SDreamer said:
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
Click to expand...
Click to collapse
Thanks
It's working beautifully.
Witch driver should i download to install that one ? Ive tried but it says i dont have it even if i point it on LG folder...
I hope your problem will be solved by installing this driver OMAP4430.
download link
csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
Click to expand...
Click to collapse
behruz_godrat said:
I hope your problem will be solved by installing this driver OMAP4430.
download link
Click to expand...
Click to collapse
Why doesnt the link work ? or should i use the shttps metod ?
Edit; Nevermind i downloaded but didnt work to install the drivers, is it only for 32bit?
Link work, but because this forum is limited I could not do it insert complete
You can copy this link in the browser address bar, you will see that
This driver is compatible with versions 32 & 64 bit Windows 7
csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
Click to expand...
Click to collapse
behruz_godrat said:
Link work, but because this forum is limited I could not do it insert complete
You can copy this link in the browser address bar, you will see that
This driver is compatible with versions 32 & 64 bit Windows 7
Click to expand...
Click to collapse
still not working but i found it in another place and tried to install it then rebooted and tried the power+up and when its loading its still fails ons OMAP4430 but i get port 5active on settings but not onLGFlashTool
Dear friend; this error message "fail port 5..." I also appeared!
I by the program "SuperOneClick" unroot got it, again then root mode the phone, back to standard mode
At this time I was able to install the original ROM
behruz_godrat said:
Dear friend; this error message "fail port 5..." I also appeared!
I by the program "SuperOneClick" unroot got it, again then root mode the phone, back to standard mode
At this time I was able to install the original ROM
Click to expand...
Click to collapse
The problems is, i cant do anything with the phone, feels like its brick, the only thing i can go is to "CWM", nothing else, so im tryin to connect my phone to the computer so it can find it and flash the phone with LGFlashTool
Unfortunately, "CWM" Only Samsung phones that are root is applicable, not applicable LG phones!!
Apart from installing flash the boot loader ROM,can update ROM your phone by the program "KDZ" to "B2CAppSetup" applications.
good luck...
behruz_godrat said:
Unfortunately, "CWM" Only Samsung phones that are root is applicable, not applicable LG phones!!
Apart from installing flash the boot loader ROM,can update ROM your phone by the program "KDZ" to "B2CAppSetup" applications.
good luck...
Click to expand...
Click to collapse
Thnx for all time and with all ideas, ive fixed it (i think) i did the power+up (without batteri) then i did put the batteri and the port stayed and then i updated from the B2CAppSetup and now its installing the V21D_00 kdz
Thnx thnx i hope now the phone will boot this time without problems, 20% left until ill see how everything went, thnx again for the time
Edit: worked, thnx again <3 all love to u
hAk0Mi said:
Thnx for all time and with all ideas, ive fixed it (i think) i did the power+up (without batteri) then i did put the batteri and the port stayed and then i updated from the B2CAppSetup and now its installing the V21D_00 kdz
Thnx thnx i hope now the phone will boot this time without problems, 20% left until ill see how everything went, thnx again for the time
Edit: worked, thnx again <3 all love to u
Click to expand...
Click to collapse
The LG phones have the worst case install ROM
I hope it does not break your phone
I'm also happy to talk to you
behruz_godrat said:
The LG phones have the worst case install ROM
I hope it does not break your phone
I'm also happy to talk to you
Click to expand...
Click to collapse
Everything works like normal now, now i got offical firmw and im afraid to put another one, just gonna root it.
Thanks for all your time and nice to talk with u 2
behruz_godrat said:
I hope your problem will be solved by installing this driver OMAP4430.
download link
Click to expand...
Click to collapse
i copied it and paste it on my browser.. i cannot open the link