Related
Hi,
I have a question about bluetooth on my Cruise. I have a bluetooth Headset "Logitech Mobile Freedom Headset" (bluetooth 1.2 and no a2dp).
My problem is that it is not detected by my phone.
Is there a way to do it works ?
Thanks
I need a little bit more details:
What have you already done? Have you ever had a running bluetooth port?
Normal procedure should look like:
Is your bluetooth device set to receive signal?
On mobile go to settings - connections - bluetooth. Folder devices: Is the device already visible? Otherwise type in Add new device. Now you should see the new device. Do your headset require a password? Type in the same as given in the manual. Connection is established.
probably you have to put headset in pairing mode, otherwise your phone cannot detect it....
Hi,
Thanks for your responses.
stefan1959: my device is not visible by my phone, even I add new device.
my bluetooth is active and my headset is on. I have another phone (Samsung D500) and my headset is detected by it.
But I have paired it a long time ago, and it is already known by my phone (D500).
I will look at the manual (if I find it !) if there is a special thing to do to put the headset in pairing mode (thanks nushuth).
I'll post here when I did it.
Thanks
mark_spector said:
I will look at the manual (if I find it !) if there is a special thing to do to put the headset in pairing mode (thanks nushuth).
Click to expand...
Click to collapse
There usually is special procedure. Headsets do not operate in discovery/pairing mode all the time, so your problem solution should be there.
Ok thanks everybody. It works with paring mode.
I forgot it because I have another headset and there is no need to do that.
Thanks again.
I've searched, but seems that nobody was able to find the answer.
I got a bluetooth headset that's pretty much always connected, but not always in my ear.
Problem is that phone doesn't ring (there no sound, only vibration) when there's bluetooth connected. Can I make it always ring?
DarkDvr said:
I've searched, but seems that nobody was able to find the answer.
I got a bluetooth headset that's pretty much always connected, but not always in my ear.
Problem is that phone doesn't ring (there no sound, only vibration) when there's bluetooth connected. Can I make it always ring?
Click to expand...
Click to collapse
My bluetooth is also always connected to my phone. What I do is that in the bluetooth settings, I uncheck the "Wireless Stereo" checkbox. In this case, my phone rings as per normal and I can still pick them up using my bluetooth.
But won't that turn off my stereo headphone functionality (i.e. stereo music)?
I got Voyager 855 which also acts as stereo headphones.
DarkDvr said:
But won't that turn off my stereo headphone functionality (i.e. stereo music)?
I got Voyager 855 which also acts as stereo headphones.
Click to expand...
Click to collapse
Well, you can always check the option when you need to use them as stereo headphones.
that's work.. =)
Isn't there an easier way?
Had this happen to me as well on the Voyager 855, but it started working again. See my post/resolution in thread.
http://forum.xda-developers.com/showthread.php?p=3579647#post3579647
Let me know if it works for ya!
Anas
worked fine ...
it was my problem with Cyanogenmod Rom.
thanks
: long press on device name to get [options]
- Un-check [Media]
- keep [Connect] and [phone] checked.
enjoy ....
hTc Desire , Cyanogenmod 7.0.3
SonyEricsson MW600 BT headset.
Cyanogen Mod
I have recently had this problem with the Cyanogen Mod
Here is my solution:
Open "Settings>Cyanogen Mod Settings>Sound"
Scroll down to the "Always Play on Speaker" section
Tick the "Ring Tones" check box
p.gogarty said:
I have recently had this problem with the Cyanogen Mod
Here is my solution:
Open "Settings>Cyanogen Mod Settings>Sound"
Scroll down to the "Always Play on Speaker" section
Tick the "Ring Tones" check box
Click to expand...
Click to collapse
I had to reboot for these setting to take effect. Other than that, this is exactly what I was looking for. Thank you!
I didn't get the phone ringtone in my wireless headphone Redmi note 5, mobile
$
Seifer1975 said:
My bluetooth is also always connected to my phone. What I do is that in the bluetooth settings, I uncheck the "Wireless Stereo" checkbox. In this case, my phone rings as per normal and I can still pick them up using my bluetooth.
Click to expand...
Click to collapse
Thank u. Ur suggestion solved the problem.
When I bought Gear 2 Neo a week and a half ago, I immediately faced the following issue: how the hell I keep using my Bluetooth earpiece for conducting phone calls? As cool as it looks talking to the Gear, it's not as convenient as wearing an earpiece, and I've been using those for the last 12 years. This new annoyance combined with an old one: when I'm in the car, I want my phone to automatically switch to the car in-built Bluetooth audio, both for phone calls and for media. I don't want to do this manually! And now, with the Gear, just think of the possibility of talking to the watch while driving the car!
Now, the Samsung phone owners have the luxury of being able to switch to the earpiece after picking up the call on the Gear. Not ideal, but workable. Still puzzles me though if you're able to choose a specific Bluetooth phone audio device if you have more than one (e.g. as with the earpiece and the car example). But we, the non-Samsung owners, don't even have this option. So finding a solution was due!
So, here are my use cases:
When I'm not in the car, I'd like the phone to be connected to the Gear all the time while not in the call. This makes sure I get all the notifications etc.
When not in the car and I'm engaged in a call, I'd like Bluetooth phone audio to switch to my earpiece as soon as possible. This automatically disconnects the Gear, meaning I'm no longer able to receive notifications on it. But this is not an issue, as, when I'm on the phone, I prefer not to be distracted anyway. At the end of the call I want Bluetooth audio to reconnect back to the Gear.
When I'm in the car, I'd like my phone to connect to the built-in Bluetooth phone and audio. I would like to stay it like this for as long as my car audio system is on. This means I won't receive any notifications on the Gear, but I reckon this is rather good while driving. When my car audio is off, I'd like the phone to automatically reconnect back to the Gear.
There are two pieces of software that helped me with achieving this:
Tasker. It's not free, but is worth every cent you spend on it. What's more, you can download a 7-day free trial to play with this guide before you commit to buying it.
Secure settings. All the functionality you need for this guide is included in the free version.
My triggers are:
Phone ringing or off hook and not in the car: connect to the earpiece
Phone idle and not in the car: connect to the Gear
Car application is launched (happens automatically when I plug my HTC One M8 into its car holder): toggle car mode on, which, in turn, connects to the car Bluetooth
Power disconnected (which is what happens when I turn car engine off or pull the phone from the car holder) and the car mode was on: toggle car mode off
Car mode switched off: connect to the Gear
Device boot: connect to the Gear
Now, you can import the attached file into Tasker on your phone and give it a go. You will need to go and replace the device MAC addresses and names with YOUR devices first (in Secure Settings configuration for each and every relevant task).
If you don't have in-car Bluetooth, just disable the corresponding profiles.
Now, there are some things that need improvement:
Right now I can't answer the calls on the Gear even if I want (e.g. if I forgot my earpiece at home or if it's out of battery). The reason for this is the way Secure Settings plugin performs BT Connect action: it disconnects the currently connected device first and only then tries connecting the other device. Also, there is no way to figure out if this connection was successful or not. I'm thinking of implementing a special toggle that will disable automatic earpiece connection on user request.
One scenario that is not properly implemented yet is switching from in-car BT to the earpiece while in the call (e.g. when you arrive at your destination while talking on the phone and want to live the car without disconnecting the call). Right now this requires manual intervention.
Unfortunately, Bluetooth connectivity of many devices is still quite buggy. I often find that, despite the fact the phone shows it's connected to the device, the audio is not going through. Or the device doesn't think it's connected (both happen quite often with my in-car BT). Usually, what helps in this situations is resetting Bluetooth on the phone or on the device or on both. I'm thinking of adding BT off/on action before any device switch just to improve reliability. However, sometimes the device needs to be reset, which may be easy (e.g. turning the earpiece off and on) or not (you can't turn the in-car BT off without stopping the engine).
That's all for now. Feedback is appreciated!
Great add thank you!
Y
Sent from my SAMSUNG-SM-N900A using XDA-FORUM, powered by appyet.com
I'm having difficulty opening your file below. Do you open it using tasked, open via file explorer and edit or open via service manager. I also have the m8 and appreciate all the work you've done. I'm fairly new to tasked so figured it would be easier to change your file and then load it.
kartch said:
I'm having difficulty opening your file below. Do you open it using tasked, open via file explorer and edit or open via service manager. I also have the m8 and appreciate all the work you've done. I'm fairly new to tasked so figured it would be easier to change your file and then load it.
Click to expand...
Click to collapse
I have appradio 2. Is there a way to modify this to always disconnect the gear and connect the car radio when I plug in USB from the radio?
You can also accomplish all this with LLama profiles which is a free application
I ended up making my own. Was better as now I have some working knowledge of tasker and secure settings. I dont have Bluetooth in my car so was a little easier.
One thing I did add was a 5 second wait/delay so I can still look at who is calling on the watch, decide if i want to answer or reject from the watch and then if I do answer it automatically disconnects the Gear and allows you to talk through the phone or earpiece.
Thats my only addition as it maintains some function of the watch to allow screening of calls without pulling phone from pocket.
There is a bluetooth setting if you'll only use it for media or phone calls or both )
Just sayin
Proud to Be PINOY
Follow us on twitter @BuhayKolehiyo and @pinoulyKaKung
Sent from my Galaxy Note 3
mjpineda94 said:
There is a bluetooth setting if you'll only use it for media or phone calls or both )
Just sayin
Proud to Be PINOY
Follow us on twitter @BuhayKolehiyo and @pinoulyKaKung
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
How exactly this helps (or is even related to) the issue at hand?
mpogr said:
How exactly this helps (or is even related to) the issue at hand?
Click to expand...
Click to collapse
because instead of disconnecting and reconnecting your watch you can leave it on and choose another device for voice calls and or notifications
mjpineda94 said:
because instead of disconnecting and reconnecting your watch you can leave it on and choose another device for voice calls and or notifications
Click to expand...
Click to collapse
The problem is the phone can have only one device connected to it using phone headset profile and it won't use any other profile (e.g. multimedia) for making calls.
Sent from my GT-I9505 using Tapatalk
Thanks ! Help me alot!
Nc
I need some resolve to me after the call is automatically disconnected BT Handset Gear2 but have remained constantly connected. Do with Timo anyone have experience? Thank you.
I solved this by using an nfc tag as a switcher! I bought an Nfc tag for just 25cents and I wrote on it with the free app Trigger... When I get in the car I swipe the phone on the nfc tag and it connects to the car BT and when I swipe the phone again it switches back to the gear!
Inviato dal mio GT-I9300
mjpineda94 said:
There is a bluetooth setting if you'll only use it for media or phone calls or both )
Just sayin
Proud to Be PINOY
Follow us on twitter @BuhayKolehiyo and @pinoulyKaKung
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
How do you get to that setting? The only option (I have it connected to an M8) is phone audio
longshot201 said:
How do you get to that setting? The only option (I have it connected to an M8) is phone audio
Click to expand...
Click to collapse
It doesnt work
you need NFC , Task or Llama
NRGZ28 said:
You can also accomplish all this with LLama profiles which is a free application
Click to expand...
Click to collapse
[EDIT]
Hi,
I'm trying with Llama, can you give me some help?
I add a new condition "ringing", but I don't understand the related action. Per my understanding I need to disconnect the GEAR, but I cannot find the specific action.
Ok, I understand that is needed Secure Setttings, but I still not able to do what I need: when the action is executed, I need to disconnect gear...
Ok, now everything is OK.
Just to clarify for who is not able to import che xml for Tasker or just want to use Llama that is free.
It is necessary to install "Secure Settings" and to create a Local Plugin Action, involving Secure Settings.
In Secure Settings, selecting the BT connect/disconnect action, it is possible to select from a list of paired device on which of them perform the "connect/disconnect" action
Thanks a lot.
I am exploring some solutions for car and Gear S3 bluetooth connection (problem is when phone is connected to Gear, car bluetooth wont connect, solution is disable Gear BT and let car pick the connection).
It would be nice if any of you can test this and let me know if it works, mine works but it's not perfect not sure why, maybe some of you can help me figure it out.
I use Tasker and BlueTask plugin for this purpose:
Open tasker and click the "TASKS" tab
Click the + at the bottom right and give the task a name such as "Connect Car Audio"
Click the + at the bottom right and select Plugin - BlueTask then BT Connection
Click the Pencil icon at the right of configuration and select Actions to Connect and choose your car bluetooth address.
Go back
Now create a new task for when you get out of the car:
Click the + at the bottom right and give the task a name such as "Disconnect Car Audio"
Click the + at the bottom right and select Net then Bluetooth. Then set it to off.
Click the + at the bottom right and select Task then Wait. I use 5 seconds.
Click the + at the bottom right and select Net then Bluetooth. This time set it to on.
Go back
Now to create the profile (or the trigger that will run the tasks):
Click the profiles tab
Click the + at the bottom right and select state
Select Net and the BT Near
Click the magnifying glass on the right of Name and select your car bluetooth system. If you prefer you can select the address rather than name.
Select the option "Standard devices"
Click the < at the top left next to the tasker icon.
You will now see a list of tasks to choose. Choose the connect car audio task (or whatever you named it).
Then tap and hold on the task and choose exit task and choose "Disconnect Car Audio"
You should have something like this at the end: http://imgur.com/a/zCm5W
Let me know if it works.
Hope it's useful.
My solution - I disabled the "phone" BT profile for the Gear S3 in order to enable the car to connect to the phone profile of my Android device properly. Works flawless now. Of course, I can't take calls on my watch, but really, who cares?
I don't need to disable anything.
I can answer from my watch or from my Kenwood DDX9717BTS.
I have a OnePlus 3T, and a Mazda 3 with Mazda Connect entertainment system.
I this solution didn't work for me unfortunately..
Just in case anyone was curious I upgraded my Nexus 5x to the Galaxy S8 Active and my bluetooth problems were resolved. My Gear S3 now plays nicely with my car's BT audio.
farshadatis said:
I am exploring some solutions for car and Gear S3 bluetooth connection (problem is when phone is connected to Gear, car bluetooth wont connect, solution is disable Gear BT and let car pick the connection).
It would be nice if any of you can test this and let me know if it works, mine works but it's not perfect not sure why, maybe some of you can help me figure it out.
Click to expand...
Click to collapse
I have tried something similar to this. My modification was using "Bluetooth Auto Connect" with Tasker. I set mine to disconnect from the Gear S3 when the car bluetooth is near and connect to the car. Works perfectly for a short period of time, but after a few minutes the watch reconnects and my car bluetooth becomes useless. It appears for me that my phone (Samsung S8) will connect to both the car and watch at the same time. My problem is that while both are connected, the audio constantly cuts out if I try to talk on the car.
During the time that my watch is disconnected, the car bluetooth connection works perfect.
I need to find a way to force the Gear S3 to disconnect from my phone and stay disconnected until the car is turned off. Hoping someone on here that is more familiar with Tasker might have some ideas.
Well mine works great. The phone connects to the car and my S3 just works also. It was cool! Yes.. BOTH were working while the phone was connected. A phone is Note 8
Hi,
Deleted.
Fix the problem
Sorry for bad english first.
I have many solution tryed. But nothing working perfectly.
Now i have installed for android phone "A2DP Volume". The watch is always connected with phone, but not over bluetooth. The phone connecting perfect for any bluetooth device when near is.
Pls try, when working give comment.
thx
Pelikan. said:
Sorry for bad english first.
I have many solution tryed. But nothing working perfectly.
Now i have installed for android phone "A2DP Volume". The watch is always connected with phone, but not over bluetooth. The phone connecting perfect for any bluetooth device when near is.
Pls try, when working give comment.
thx
Click to expand...
Click to collapse
Hi, how you have set A2DP Volume?
Inviato dal mio G8441 utilizzando Tapatalk
heavyhms said:
Hi, how you have set A2DP Volume?
Inviato dal mio G8441 utilizzando Tapatalk
Click to expand...
Click to collapse
Hi.
I dont set anything. (start boot on, show popup on, Respond to car mode on, enable reading text messages on, user network locations on. The rest is off)
Now when im turn on my headset , connecting 3-4 sec. Or any another device.
Tested now: does not works for fixing Bluetooth call on car handsfree system [emoji17]
Inviato dal mio G8441 utilizzando Tapatalk
Other fix
heavyhms said:
Tested now: does not works for fixing Bluetooth call on car handsfree system [emoji17]
Inviato dal mio G8441 utilizzando Tapatalk
Click to expand...
Click to collapse
Have tried the setting in tasker, but found it kept disconnecting every 20 mins then reconnecting on a VW touran RNS 315 system. Have found this solution and now stays permanently connected. Give it a try.
.forums.androidcentral.com/samsung-gear-s3/764566-phone-no-longer-auto-connects-vehicle-now-its-paired-gear-s3.html#post5662942
Gear S3 has no connection problems and car auto bluetooth connect also whitout issue, but the "audio call" protocol remains connected on Gear, and cannot be enabled on car auto.
i don't want to totally disconnect gear bluetooth only releasing the audio call protocol if a car audio is connected (actually this works only with samsung phones, with other android is necessary to remove the flag from audio call on bluetooth connections proprieties)
I was searching for this solution for some time, which was buried in a 13 page thread on the subject. Taken from this page (https://www.reddit.com/r/hwatch/com...ooth_headset_profile/?st=j6ocsof4&sh=983466ba), this has worked 100% of the time for me. It only took about 5 minutes to program in my bed--without having any previous knowledge of Automagic. I was initially deterred because of its reference to Tasker but I did find it easier than Tasker--which I still don't use or really like. Here is a copy/paste from the thread w/ a few tweaks that had me confused.
Since we got the Marshmallow update, I've had the issue where if I'm connected to my cars bluetooth speaker when I make a call or it comes in, would go to my watch. Workaround was having to remove the call audio from the watch and then switch it back on, pretty annoying. I tried using Tasker as a previous person made a post about it but couldn't get it working. Using Automagic, I got it working!
This is basically like Tasker but easier to use and not to mention I couldn't get Tasker working. The app costs $3.90 https://play.google.com/store/apps/details?id=ch.gridvision.ppam.androidautomagic&hl=en
You can download a free trial via their website http://automagic4android.com/en/evaluation
I got it working with 2 flows (Flow = profile). If you install the free trial, you can only use 3 flows at a time so when I installed the trial I deleted all the flows it came with. Basically what this does is whenever I connect to my car's BT it will disconnect the headset profile from my Huawei Watch and connect to my car BT headset profile. So when I make or receive a call, it'll go to my cars BT and not my watch. The watch still remains connected but just not the headset portion. When I disconnect from my cars BT connection it will reconnect the headset profile to my watch.
Create a new flow. I named it "Car BT connection".
Add a new trigger and choose "Bluetooth Device Connected"
-- To do this, click on the menu button, select new flow, click on the box, select the five lines, click on blue new at bottom, then select bluetooth device connected.
Click on specific device and choose your BT headset (In my case, I chose my cars BT)
-- After clicking on specific device, click on the three dots to the right of the space under bluetooth device addreses. If, like me, you may have two Ford Syncs listed (two Ford vehicles), you can figure out which is which by going to your phone's settings --> bluetooth --> gear icon --> delete the name of the device and select OK. This will then show the MAC address of that device. To figure out which one is which, do this while connected to vehicle and choose the one that says connected.
Click save
Click the plus icon and choose action
Select new and choose "Connect/Disconnect Bluetooth Device"
Bluetooth profile should be set to "Headset"
Bluetooth Device Address: Select your Huawei Watch
Choose "Disconnect" under Connect or Disconnect
Click Save
Click the plus icon and choose action
Select new and choose "Connect/Disconnect Bluetooth Device"
Bluetooth profile should be set to "Headset"
Bluetooth Device Address is your BT headset device (I chose my car)
Choose "Connect" under Connect or Disconnect
Click Save
Should look like this: https://drive.google.com/open?id=0B1J8Oay2yaZwb05WNzE2cVBRa1k
Click back arrow and create a new flow. I named mines "Car BT Disconnect"
Add a new trigger and choose "Bluetooth Device Disconnected"
Click on specific device and choose your BT headset (In my case, I chose my cars BT)
Click save
Click the plus icon and choose action
Select new and choose "Connect/Disconnect Bluetooth Device"
Bluetooth profile should be set to "Headset"
Bluetooth Device Address: Select your Huawei Watch
Choose "Connect" under Connect or Disconnect
Click Save
If you get a message stating something about if you want to reuse select yes and only for that location
Should look like this: https://drive.google.com/open?id=0B1J8Oay2yaZwWDUwN0dOS29KRm8
If you have any questions let me know.
Hello:
I'm sorry to answer this thread after so long, but I bought the Huawei Watch 2 to use it to make calls with voice (via "ok google"), since my car bt does not carry.
I have done everything you say, but unfortunately, it does not work automatically. Manually executing the two flow, it works, but by itself it does not. Should we do more?
Thank you very much for this tutorial
Warper4 said:
Hello:
I'm sorry to answer this thread after so long, but I bought the Huawei Watch 2 to use it to make calls with voice (via "ok google"), since my car bt does not carry.
I have done everything you say, but unfortunately, it does not work automatically. Manually executing the two flow, it works, but by itself it does not. Should we do more?
Thank you very much for this tutorial
Click to expand...
Click to collapse
I actually just turned my watch off from answering calls; however, no. You shouldn't have to do any more. It worked perfectly as described above. Not sure if something has changed since I posted. Sorry.