Qtek s200 (G3) with original rom, update to radio rom 2.69.21, works fine.
Next step, install RUU_Prophet_220734_2207114_024721_NVID and after Prophet_4.0.0.0.4S_PV, no problem, all ok.
Now all update (IPL 2.20, return to RUU_Prophet_220734_2207114_024721_NVID for install PV_4.0.0.0.5a_Cross) don't work! When launch the .exe file and enter in the bootloader appears error 260: unable to connect. Recovery not necessary, after put out the battery the qtek run normally.
Restart pc but same problem.
I have tried to install directly the rom PV_4.0.0.0.5a_Cross and it works, but if I try launch IPL 2.20 or RUU_Prophet_220734_2207114_024721_NVID same problem, error 260!
Help me pls^^
PS: sorry for bad english, I hope you have understood
Related
Hi,
I tried to upgrade my Qtek S200 with the newest ROM release from PdaMobiz (the 16M pooling page one), but encountered some problems...
It's a Portuguese TMN Qtek (or at least it displays the operator logo when started), although the software is in English.
IPL is 2.09 and SPL is 2.15...
However, after upgrading it, it kept displaying the Operator logo with IPL and SPL, and freezed, so it never worked. When I tried to revert it, I wasn't able to do it, because every time I try to install a different ROM (all of them for the G3 device) it just installs the new ROM, and then goes to that screen and freezes...
It never gave me any error during the upgrading/downgrading, because when it checks the version of the ROM, it displays no information, so it just says that is going to replace the inexistant version with the new one...
Is there a step a missed (I didn't put it in bootloader mode before doing the first upgrade, but I had already done that before with other ROMs and it worked fine...)?
Now I'm stuck without knowing if I should have done an unlock CID before upgrading it, or if there is another steped I missed... Please help me out...
Thanks in advance,
Nuno
Tried this?
Read this in one of the threads and it solved his problem:
Extract the rom file you are using to flash your phone, to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility-NoVendorID.zip") into this folder. than connect your phone to pc and double click on "ROMUpdateUtility-NoVendorID.exe".
I personally have not tried it, but I downloaded the prog just in case, Hope it helps.
Now it gives me an error...
Hi,
Just tried what you advised, but now it jusk keeps giving me the error 208, which is supposed to happen because I have other programs open on my computer... Tried rebooting, closing most aplications with task manager, and still it doesn't work.
Also tried to downgrade to lower ROM upgrade, but it gives me the error that I can't downgrade, only upgrade...
When I upgrade it with AKU 2.3, it goes all the way through the upgrade, and then when it reboots, it just keeps giving me the operator logo screen with the version info on the display.
If I try to reboot to bootloader mode, I'm not able, the only way to do it is by removing the battery...
I'm probably still doing something I shouldn't... It should be able to work the downgrade utility...
Anyone can help?
Thanks,
Nuno
Try this rom:
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
It shoud be ok.
If your prophet has spl end up with 2.xx.0001 check at
ftp://xda:[email protected]/Uploads/Prophet/
find out the rom which can solve for SPL 2.xx.0001.
Good luck
Thanks Chan! Problem solved!
I was starting to review all my steps ir order to see what I could have done wrong...
Would you advise me to upgrade now to the PDAMobiz latest ROM (the one with the biggest pooling page)?
Thanks again.
Nuno
1. Unlock cid
Since your prophet spl is 2.15, you have to follow this step.
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437
From file you can get from ftp://xda:[email protected]/Uploads/Prophet/
Your PC has to connect to network or internet (to have ip address), becuase in that script use ping command for delay 4 seconds.
It's just downgrade and unlock cid.
You may verify if cid unlocked, by backup rom to sd card. (use romupdate.exe with r2sd all command, check at wiki)
2. Upgrade to official rom
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. Upgade to pdamobiz, I suggest you to upgrade 12 Mb pagepool version. (even 8 mb version is ok). Because 16 mb has smallest ram space.
Good luck
All solved!
Again,
Thank you very much for your help!
After some tries, upgrading, downgrading, upgrading again, etc, I finally got it, so now its running the PDAMobiz version, which by the way, seems great so far!
Next time I'll come to you directly and then try to make things on my own...
Thanks again!
Nuno Eça
Hello, I installed Smart1 Clear ROM, and it worked fine on my G3. Then I came up with an idea to try Nghinhia ROM, but when i flashed the ROM i forgot to upgrade, or downgrade IPL and SPL.
When Im starting up my phone it gets stuck where the IPL and SPL information is standing.
So, I went to Bootloader, were I'm trying to flash a new ROM trough USB, but when I'm connecting the USB the PC syas that there is no "driver" for the USB.
My IPL/SPL is : 2.10
Can someone learn me how to flash a ROM so I can get my phone to work again? Thanks!
i just faced this problem by upgrade it from Smart1 to Nga..
i had to return to original odl Qtek ROM with installer EXE program.
enter bootloader and install the old stable version.
Just from bootloader? And EXE program? Can you upload the program? I really need to get my s200 working!
Thanks!
download this ROM http://www.nurbil.net/destek/TurkcellPDA_NEW_ROM.zip
then enter bootloader mode (press camera + reset)
and run exe. all this.
Ok, I'll try
I run the program and everything, but it says that I havent connected the phone, but i have
are you in bootloader mode ?
RGB screen with IPL/SPL info ?
Yees, i've nearly made it. But it says that i should check the update utilities!
What does that mean?
Im in bootloader
forget it and click next.
if next is not available then restart your computer and re-try.
I've started the computer off and on. Then i tried, its the same, it says : Invalid Vender ID. Please check your Update Utility..
Whats wrong?
so you should look for NOID installer.
Whats that? Can install it from bootloader?
download a different RomUpdateUtility from the forum. check ftp you will find something useful.
Im not very good at this, can you find the link for me?
http://www.uploading.com/files/4XQ0LCGI/RUU_Blank.rar.html
extract the original exe in a folder and go RUU_TOOLS\PROPHET\WWE and . copy these new files in this folder. then run romupdateutility.exe
and this time if the same message exist then definetely you must find NOID rom installer. check forum.
What? Is this for G4? And what did you ment with the location? Nothing is called that..
???? Anyone no?
Press dump on the phone and press the button of the camera should the picture with three colors (as we it name a matress), connect the phone to usb then will appear and establish Prophet_220734_2207114_024721_NVID and then any stable version
Okey, were can I download that? What am I suppose to do when there is coming up: Please check ROM update Utilities?
What do I have to do with the phone to work then?
Please please please, sum 1 here can be kind enuf 2 help with my problem.After installing wm5 finding lots of issues tried to downgrade to 2003se and now stuck woth spl 2.5.0105, no os and only bootloader with no iu mode. i tried mtty but give error not allow operation!! and try to typhoonnbftools but says no immediate flash available. I also try to use ruu patched 1010064 spl / 1.01.0109 but to no avail. I am DESPERATE for a solution to this as I just need my phone workin again. I also try to use psdwrite but dont know/understand proper commands as I have official ROM from imate site and would like to know if possible to load this onto SD card or sumthn?
I followed the instructions to upgrade to a Portuguese ROM
As discribed in
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
http://rapidshare.com/files/18878817/POR_11205_122_11210_ship.exe
At first place I got an error 120 country error
Then I tried MaUpgradeUt_noID.exe like i read in this forum.
I read that I could use an option in RUU.conf called [CHECKCEID_TYPE]=1
But with or without this option I get the Error 150 Rom Upgrade Utility Error saying this is not the apropriate rom upgrade version (with MaUpgradeUt_noID.exe).
When i use ROMUpgradeUt.exe I get the error 101. Connection error.
Right now my PDA is saying that is connected by usb, with 1.02 below without any blacklight.
I unchecked the USB connections but in my case is in windows mobile device center because i use windows vista business.
Please help me because i realy need this pda working.
Thanks a lot your time
same problem
i have the same problem with my s110
its still in usb or serial mode witout backlite
i dont now what to do so ist becomes still allive if you get any help let me nowh
hi there
i have a qtek s110 too and i'm pondering the upgrade to the port rom version.
i have been doing some research i think that the rom upgrade can only be done through windows xp.
have you both done it on vista?
that might be the problem...
i don't want to take any risks on doing it, so i'm still investigating...
well i updated or chaged the language on my magician last week also to portugees rom for a girlfrend with portugees background i know and she does not know english that good
from the opperating system i got the same errors as you guys discribe but when i did put it into bootloader mode ran the MaUpgradeUt_noID.exe en the upgrade whent smooth just try to run the upgrade again your device is already in bootloader mode as far as i understand i did the upgrade in XP not sure the same trick will work in Vista
Hello , I am owner of imate kjam unlocked phone.
My IPL / SPL ver is 2.16.
MY GSM ver is 02.07.10.
My OS ver is2.16.9.1.
I cooked the Crossbow_Reloaded_1.7_Final using core pro.
It completed 100% ok but when i restart my phone the OS its the same.
What i am doing wrong ?
I followed all the instructions step by step without having any problem.The only error i get its when the phone starts up after the upgrade when its installed the programs i get the error \windows\autoconfig.exe does not exist.
Please help me.
Thanks
i had the same problem any ideas?
Your Phone is CIDunlocked. You need to be CIDunlocked b4 you can upload the Rom Properly