I have been on the KaiSer forum for the last few months. As from my signature below, I have been lurking for a long while at the Universal forum. Thus, my acquaintance with master-chef Leo.
The first thing, I did when I got my att tilt early this month was to install the Hard SPL and then install L26_WM6.1_PRO v1 (Based on the AT&T 209 build) from the following thread:
http://forum.xda-developers.com/showthread.php?t=381837
When I tried to install the IMAGiNet Arabizer, it didn't install at all. Being a ROM flashing junkie from the Universal forum, I wasn't surprised at all. I had encountered this problem once in the past, even though clearing the prior install after the new flash
I encountered the same problem with Leo's v2, which was recently released on 24 April, 2008.
Being a flash junkie, I tried some of the Dutty's ROM released from during March and April. Didn't encounter any problem with these ROMs.
During April the TNT 19202 Series ROM was released too by Its Right. The IMAGiNet Arabizer didn't install with this ROM too.
http://forum.xda-developers.com/showthread.php?t=385900
But, I could install the InforMobility Arabizer on all these three ROMs, two by Leo and one by Its Right.
Both these IMAGiNet Arabizer and InforMobility Arabizer are paid programs and come with several modules. IMO the IMAGiNet is a better product than InforMobility.
Secondly, one of the beauty of KaiSer ROMs is that they are UC capable. Thus, it is frustrating that during the SDConfig process a software refuses to install as this knowledge is not previously known.
I have uploaded the two main modules for the IMAGiNet Arabizer. They have a trial period of one month.
Can some of the masters on this forum and everyone else help to resolve this problem that why the IMAGiNet Arabizer doesn't work on some ROMs?
Many thanks in advance!
KOR!
Also, this is what I found on Leo's ROM. I am not sure if the problem is related to the above.
odyseus said:
Anybody tried using Wifirouter v1.01 with this build?? Because I cannot install this application (Installation unsucessfull)??
I was able to install this application on dutty's builds etc???
Cheers Ody
http://forum.xda-developers.com/showthread.php?t=381837&page=37
Click to expand...
Click to collapse
It all has to do with the 19209 build. I am able to install all the programs you listed without any problems using Dutty's April 1st Hybrid ROM. I also was able to install and use iGO 2006 and MSVC.
One thing though, MSVC will stop working after a couple of uses if it is mapped to the PTT button, or any button that has the press and hold capability. So I mapped the MSVC to button # 4 ( OK Button).
I am using a 8GB Micro SD Card as well, however, when I create a folder on the SD card, any dll file that I save there will NOT show or display!
I have tried all ROMs there is and finally realized the best ROM for my purposes is Dutty's April 1st Hybrid.
Just my 2 cents...
Hi Asfoor,
Thanks for your reply.
Excellent observation!
I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.
So, is Leo's v1 is a hybrid ROM 19209.
And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?
Thanks,
Mohamed
It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.
Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1
Regards.
Tomtom
Love the ROM and it works great! No problems yet. Better then Duttys I think
Can anyone link me to a Tomtom download that will work for this ROM please?
Also, are there any threads or sites that list optional appz that can be installed on this ROM?
Mohamad, Just flash with this ROM:
http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zip
I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...
shafez said:
It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.
Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1
Regards.
Click to expand...
Click to collapse
Not true... I have it on my WM6.1 Hybrid and working fine (or as intended for it to work), using the Rom I just pointed to via Rapidshare.
I also find that In4mobility is better than Imaginet Arabizer, as the issues with Imaginet are mutually suffered by all WM Versions; Stability issues, Freezing, and slowness.
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
King of Rapture™ said:
Hi Asfoor,
Thanks for your reply.
Excellent observation!
I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.
So, is Leo's v1 is a hybrid ROM 19209.
And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?
Thanks,
Mohamed
Click to expand...
Click to collapse
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
The problem is that windows refuses the installation giving the error "installation unsuccessful". It may be related to certification or something like that. I believe a chef like you can get it for us as many of us are not using some good ROMs for that reason.
Thanks
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Leo... Good to see you here... also excited about your release on Monday for a new build ROM. Keep us posted. I am wondering if you are gonna do without HTC Home this time around.
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
hbahaie said:
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
Click to expand...
Click to collapse
Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks
walker said:
Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks
Click to expand...
Click to collapse
yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.
Imagent (=Mobidiv New Version) Arabizer is compatible on most (85%)of the roms
I had similar problem before (error installation)
The conditions needed for successful installation
1-Make Sure that you manually remove all Arabizer folders wither Imagnet or in4mobility from you storage card (if you installed any prior applications on SD)
2-After flashing any new rom, Arabizer Cabs Must Be the FIRST TO BE INSTALLED preferably on the main memeory.
I agree there are few roms you will not be able to succeed
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Hi Laurentius26
Thanks for your interest in helping us with this issue, I really like your roms
its my favorites actually
The problem with the Arabizer software (Imaginet/Mobidiv) is that it can not install , it will give an immediate message of (installation unsuccessful) as soon as I choose the destination drive.
this is true in almost all wm6.1 except all dutty's roms !
I thought the problem was with registry since duttys do a lot registry tweaks.. so I made a comparison between duttys registry and yours trying to figure out the differences... but no luck
I also managed to trace the CAB execution through IDA assembler to see why the file is refusing to install but no luck.. since I don't know how do this with a cab file... I usually do it with exe and dll
for now I am sticking with duttys rom since they are my only choice. and I really missed you ROMs
hbahaie said:
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
Click to expand...
Click to collapse
Salam brother hbahaie,
Thank you for your welcome. Nice to see some old faces, it makes me fell home.
Sorry, to reply a bit late. Was doing some more research. The problem with both IMAGiNet and MOBiDIV is that they both refuse to install on Leo's ROM. Giving the message "installation unsuccessful". This is with Leo's all ROMs, whether hybrid or not. However, the InforMobility (Fejebi ein) does work on Leo's ROM and as you mentioned it is not so beautiful.
hbahaie said:
yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.
Click to expand...
Click to collapse
Thank you for your help on master TSD in ce4arab.
Mohamed
Laurentius26 said:
Hi KOR,
Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Hi mate,
Waiting for your release v3. Hopefully, you had the time by then to look into the IMAGiNet Arabizer. Thanks!
Regards,
KOR!
asfoor said:
Mohamad, Just flash with this ROM:
http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zip
I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...
Click to expand...
Click to collapse
Hi Asfoor,
Thanks for your recommendation. At various times I had Dutty's ROMs from March to April, all of them.
I will try again tonight before Leo issues his v3, the ROM you have recommendation. I have a big problem with all Dutty's ROMs, that once the bluetooth is connect, the ring tone goes to bluetooth and I miss all the calls (miscalls).
Maybe, some registry tweak?
KOR!
the Arabizer software Mobidiv not working on Laurentius26 lates rom release V3
it works however with duttys latest one
what is the secret behind this
i am using a cooked rom on my Kaiser, which dont have Chome integrated. the developer uses PointUI. i am not a fan of Pointui and want to switch back to the original Chome panel. is there anyway to do that except re-fresh another rom? i.e. is there a cab file to re-install the original Chome? i am really fancinated by all kinds of chome themes and wanna try out.
thanks
wangalv said:
i am using a cooked rom on my Kaiser, which dont have Chome integrated. the developer uses PointUI. i am not a fan of Pointui and want to switch back to the original Chome panel. is there anyway to do that except re-fresh another rom? i.e. is there a cab file to re-install the original Chome? i am really fancinated by all kinds of chome themes and wanna try out.
thanks
Click to expand...
Click to collapse
Is it wm6.1 or 6.5 ROM? If 6.5 then yes, but no guarantee that it will work. You are better off flashing to a WM6.5 ROM.
You probably already know this, but figured I might as well ask.
Did you check the setting for the today screen?
Star Menu - Settings - Today - Items Tab - Check off Windows Default or Titanium to enable CHome, uncheck the PointUI, and hit OK.
I doubt they fully removed CHome as it's also the files that control the new start menu and Unlock/Etc screens.
OMG theres nothing at all urgent about this thread, MODS PLEASE CLOSE THIS THREAD AS IT SHOULD NEVER HAVE BEEN CREATED! THE THREAD STARTER SHOULD HAVE ASKED THIS QUESTION IN THE THREAD OF THE ROM HE/SHE IS USING.
Quoting: msd2400 "without a quote blame Opera and the mini server update, still not solved"
Yep deffinetly not a urgent issue and should have been posted in the ROM thread....
msd24200 said:
OMG theres nothing at all urgent about this thread, MODS PLEASE CLOSE THIS THREAD AS IT SHOULD NEVER HAVE BEEN CREATED! THE THREAD STARTER SHOULD HAVE ASKED THIS QUESTION IN THE THREAD OF THE ROM HE/SHE IS USING.
Click to expand...
Click to collapse
I think I know which ROM he is using..
as title implies evry rom i flash to my kaiser, non the of the d3d drivers work, the only way that iv goten them to work is by flashing atts oem rom and then manualy installing them, iv tried them all htc ci kai,cab. neos, the omnia ones, evry single one of them refuse to work on my kaiser while i have wm6.5 intalled
and btw my kaiser has the msm7201
bump.........
siulmagic said:
bump.........
Click to expand...
Click to collapse
most of the 6.5 roms for the Kaiser have the 101 ram hack cooked in. The d3d drivers do not work with that hack in place. The only chance you have is look for a 6.5 rom that does not have the hack. Not sure if there are any
dude thx alot for the answer iv search evrywere for it, now il ether find a 6.5 rom with out that hack or cook it if i can
siulmagic said:
dude thx alot for the answer iv search evrywere for it, now il ether find a 6.5 rom with out that hack or cook it if i can
Click to expand...
Click to collapse
No prob. You might find you will have better luck cooking one up. I know there are alot of 6.1 roms with out it but not sure about 6.5. Check out TPC and Josh's Kitchen thread. You may find your answers there
ya i found tcp and Joshkoss tread, im cook the rom see if it dosent have the hack
siulmagic said:
ya i found tcp and Joshkoss tread, im cook the rom see if it dosent have the hack
Click to expand...
Click to collapse
I think it is built it to the 6.5 kitchen but I am sure if you ask they will tell you how to remove.
il have to post and ask then because yea, i just read it up Xd, talk about being in a hurry =/
edit: i cooked the rom removed the hack and it still does not work
d3d drivers working
i think this solution will help...
http://forum.xda-developers.com/showpost.php?p=4380365&postcount=416
Sakajati's hyperdragon rom always use samsung omnia d3d driver, and doesn't use the 'super ram' method to sacrify performance. check my signature for links.
by the way in my opinion the samsung d3d driver is the best one for kaiser. there also is a sererate thread for this driver.
after flashed a wm65 rom without the ram hack, you can use some utility tools to disable the large start menu, large menu, large title bar, shutdown animation, etc. then wm65 will be super speedy running on kaiser.
Hi Guys
Im from german - sorry for my bad English.
I have for 30min ago flashed windows mobile 6.5 to my Polaris. But it isnt the original it haves the terrible manilla 2d interface.
So i used the Web to search for the original for Polaris.
But i didnt found it.
Can someone help me pls pls ??
Xda Developers is a great forum.
I have learned to flashe a Windows Mobile device ( Sometimes i flash sony ericsson mobiles ).
Greez
evo_racer.
You hadn't search a lot. You can switch manilla 2D to default windows 6.5 home in pcarvalho rom for example.
Which rom have you install. Give us pore details if you want help.
F.
I have installed the Rom:
Kostas244_ROM_3g_23016_FINAL_B2
How can i change the manilla to the original Interface of WM 6.5?
cu
Don't know if this rom as both.
Start / Settings /Today /Items and check the one you want
imfloflo said:
Don't know if this rom as both.
Start / Settings /Today /Items and check the one you want
Click to expand...
Click to collapse
Of course ...check "WINDOWS DEFAULT"..
it's been a while, but not many WM6.5 roms around? I see only pcarvalho and pdaviet in the forum
but there's no way to search "WM6.5" as it returns nothing.
before there were many Wm6.1 roms...
You need only to read THIS page, is full of WM6.5 roms...
Hi
Yes i've been there, but search doesn't work with "ROM" keyword or WM6.5
and the sticky that was there for WM6.1 etc now gone...
tried pcarvalho eXtreme but it seems very slow, is this due to WM6.5 itself? should I stick to official WM6.1?
Hi first time poster.
I am the proud owner of a HTC touch pro 2.
Ive been reading on this site about the different roms eg Manila but goodness im so confused, im not really that tech pro. In my settings screen it says "TouchFlo 3D 2.1.38158.2", after some reading on this site it seems to me thats the manila version. is that right? if so how do i upgrade it so i can use the custom themes and skins.
Also i have windows 6.1 on my device atm. should/can i flash it? If so what is the recommended rom to put on (if thats the right way to put it)
Thanks in advance.
pboy_
Welcome aboard
have a deep read here to learn hot to upgrade your ROM:
http://forum.xda-developers.com/showthread.php?t=550540
You can upgrade to wm6.5 if you want.
I can recommend Energy ROM´s
Leo= Manila 2.5 (slower for Rhodium)
Phoenix2= Manila 2.1 (better for Rhodium)
Good luck and enjoy!
thank you so much for your reply.
I just flashed my fone with hardspl but have yet to install a rom.
should i (do i have to) update my wm6.1 to wm6.5 to use the Energyroms?
i guess another way to put that question is, is it worth installing roms on my 6.1 or is it just simply better and wiser to upgrade to 6.5 and then flash a rom?
Give it a try!
Don´t be afraid, if you follow instructions all should be ok
And if you don´t like 6.5 you can always move it back easy!
thank you so much for your replies.
I cant seem to locat.e an upgrade rom for my fone and ive searched these and other forums like crazy, ive googled everything, been on the HTC website i just cant seem to locate it.
Rom version : 1.19.707.2 (51489)
Rom Date: 06/22/09
Radio Version: 3.55.25.27
Protocol Version: 61.25t.25.19U
Thats the infromation on my fone. i put up a thread in another forum and they just showed me the google link for the search and closed the thread. The search didnt help at all. Does anyone know where i can find the update FOR THIS.
Thank you so much
Do a search for Energy ROM´s