Hi
I have read a number of posts of people with similar issue to myself with the recent Corssbow roms on a G4 handset.
I have upgraded to both
PDAVIET 4.0.0.0.1 and
PDAVIET 4.0.0.0.3
both of which have bummed out on me and randomly stopped accepting my 100% correct pin to unlock my device.
I have tried to disable all pin codes on my device and using SignGuard Pro. however I was surprised to find a pin code request after a randon soft reset.
This is driving me bananas as it seems to make all Crossbow roms unusable for a G4 unit, which is a shame because they're excellent.
Has anyne found a workaround for this?, or a bugfix or possibly a rom which doesnt bug out? or whether Jesters upcoming release will attend to this issue.
All info would be great, as Im forced to hard reset my device every day and restoring everything, or rolling back to ~WM5 which would be a shame.
I've also recently installed the new PDAViet 4.0.0.4 SSE edition and once again this morning I was locked out after a full battery drain.
So far I've noticed no Battery drain with 4.0.0.1 or 4.0.0.3.
Anyone able to help at all? there are other versions of this ROM out there can anyone report back?, there must be more than just myself on a G4
*****EDIT*****
And also locked after a soft reset following a freeze installing BatterStatus on the new PDAViet 4.0.0.0.5, /
Am I posting this is the right area of the forum, its getting about as much interest as a fat chick in a roller disco?, Shall I move it to the G4 area, or the Prophet mobile 6 area?
I have this problem also, after I soft-reset, it doesn't accept my pin... I just do no pin and get on, but i would also like a fix.
I mate, thanks for the reply. I was beginning to think there was a neebie first post stigma here of something.
I've run a couple of the PDAViet versions with Pin security disabled. But the same issue unfortunately eventually the phone randomly 'requires' a Pin which isn't recognised. Even with alterntive phone lock security installed. Its a real boner. How long have you been running fine with no Pin enabled?, I got about 2 days
I have the same problem. I don't think this is isolated to G4 devices as I do have G3 Prophet. I also been using password with all other 4.0.0.0.4's I've used with no issues at all. I'm hoping this won't settle down to "just disable your PIN" resolution as this is a security issue.
I agree, its a bit of a mystery how everyone else is coping considering from what your saying that this is an issue accross the board, regardless of Prophet version or ROM. I think you were just lucky with your other ROM upgrades that your pin never became a problem, I think I was running 4.0.0.4 for a couple of week before the chuffing thing went ****bananas. the other versions not so long. between 1 day and 3.
Im really not about to carry my PDA around without a pin, any old charlie boy could be off with it and mayhem would ensue.
Sideburnt said:
I agree, its a bit of a mystery how everyone else is coping considering from what your saying that this is an issue accross the board, regardless of Prophet version or ROM. I think you were just lucky with your other ROM upgrades that your pin never became a problem, I think I was running 4.0.0.4 for a couple of week before the chuffing thing went ****bananas. the other versions not so long. between 1 day and 3.
Im really not about to carry my PDA around without a pin, any old charlie boy could be off with it and mayhem would ensue.
Click to expand...
Click to collapse
I ended up going back to 4.0.0.0.4S_PV as this Rom didn't give me any issue with Password. I hope it stays that way or I don't have a choice but to reverse back to WM5.
I own an employment agency and I can't imagine somebody picking up my PDA and starts entering Tasks and Appointments, and messing with Files. It all syncs with my 3 laptops in my office and my personal laptop using Exchange. My secretary will not be pleased.
Related
Hey all,
My wizard is about 1 year old, and I'm getting the need for an upgrade.
I was thinking about trying a WM6 ROM, but can't decide if I should.
My question really are:
1. Is it worth it? Will it feel any different than WM5, other than just new look?
2. What are the chances of bricking the device during the upgrade?
Thanks a lot..
kramerica2 said:
Hey all,
My wizard is about 1 year old, and I'm getting the need for an upgrade.
I was thinking about trying a WM6 ROM, but can't decide if I should.
My question really are:
1. Is it worth it? Will it feel any different than WM5, other than just new look?
2. What are the chances of bricking the device during the upgrade?
Thanks a lot..
Click to expand...
Click to collapse
Let me just say that in January I was ready to throw my Wizard (8125) in the trash. I hated the phone as it was the worst purchase I ever made. It was unreliable, dropped calls, and reset for no reason all the time. It became for me just a PDA, and even then one I barely used since it would reset everytime I started to really need it (or so it seemed). My Nokia 6620 was far more reliable and useful than my 8125 ever was (but due to contracts and prices, getting a new replacement wasn't really an option for me, but I did figure out how to SIM unlock my Nokia 6620 so I was looking at going back to it). Since I had decided to go back to the 6620, I remembered hearing about people flashing custom roms on their Wizard devices, and decided to come back to XDA-Dev (I had found it last September but the term "brick" scared me off), and give it a shot. What was the worst that could happen? Brick it? I was ready to trash it anyway so who cared.
I read everything and decided to give the Faria AKU3.3 a try (WM6 was brand new out and I was intemidated by things I was reading). After I successfully CID Unlocked and then flashed the Tmobile 2.26 rom (which I found hilarious on a Cingular device) I then did AKU 3.3. All I can say is, the rest is history. My eyes were opened. Suddenly this phone became what it was supposed to have been when I bought it. It was fast and reliable. All of my issues (resets, hangs, and dropped calls) were all gone!
So at a minimum, CID Unlock (if you ahve a G3) and put a custom WM5 rom on. You will NOT be disappointed...
But then the ROM flashing bug took over and I'm firmly into WM6 now. I don't think I can ever think about going back to WM5. I just like the feel and ease of things in WM6 (but at first some things I did not like so it takes time to get used to some of the changes).
So good luck in what you decide. Most claim after upgrading to mine (or many other of the custom roms here) that their phone has new life and it stalls the need to switch to buying a new device... Yeah, I'll probably move to an 8525 (Hermes) sometime, but right now my little Wizard is my best buddy and as important to me as my work computer. I use it for everything now...
mfrazzz said:
Let me just say that in January I was ready to throw my Wizard (8125) in the trash. I hated the phone as it was the worst purchase I ever made. It was unreliable, dropped calls, and reset for no reason all the time. ...
I read everything and decided to give the Faria AKU3.3 a try (WM6 was brand new out and I was intemidated by things I was reading). After I successfully CID Unlocked and then flashed the Tmobile 2.26 rom (which I found hilarious on a Cingular device) I then did AKU 3.3. All I can say is, the rest is history. My eyes were opened. Suddenly this phone became what it was supposed to have been when I bought it. It was fast and reliable. All of my issues (resets, hangs, and dropped calls) were all gone!
.....
Click to expand...
Click to collapse
Hmmm... this is a good piece of history. Can it go into the ROM flashers anonymous thread? Please...
kernelguy
I have been having a lot of distortion problem with my Vox. So help me out. Currently I am using 4.1.13.60_03.18.90.
Kindly vote and tell your experience with different versions.
I never had any problems with 03.10.90! But then again my state is fairly good covered (Saxony). I think only like 2% of the area is not covered with GSM (and lately more and more with EDGE too)!
I plan on giving a thorough test of all the later versions once I re-assemble my mobile. I also noticed high distortion on 4.1.13.60_03.18.90 immediately after flashing. I am led to believe this was a small reason my ear piece failed, the distortion and higher volume 'popped' in and it would no longer function properly, heck, it could also have been since it was quite old too.
Anyways, for good measure I will be reverting to 4.1.13.47_02.98.90, I never had issues with the radio shipped from the factory and coverage was no problem. I suggest you downgrade before any hardware has a chance at being ruined.
h4waii is true. I have installed several radios and I have found 4.1.13.47_02.98.90 the best especialy for areas with weak signals.
h4waii said:
Anyways, for good measure I will be reverting to 4.1.13.47_02.98.90, I never had issues with the radio shipped from the factory and coverage was no problem. I suggest you downgrade before any hardware has a chance at being ruined.
Click to expand...
Click to collapse
I read your thread that you are reassembling your phone. I hope you will put a video guide for others too. That will be very useful.
I was reading through forum and I came across a post in which he had said that he pulled out the battery and put it after a few hours and things were back to normal. Well I tried it and I dont know what is the logic but it worked. Still echos on high volume but other reception distortion is gone.
Can radio damage your phone? Mine was shipped with v4.1.13.54_03.10.90.
@frauhottelmann
You have cooked a lite rom and it is not with latest XIP. Why you and Gonzo are not updating their Roms. Lefab also not working on WM6.1 Rom. Only one working is Hikey, and he does not have a thread here. I requested him in post but he refused by saying their are already too many roms here. Is it possible to hope that one of you will bring a clean Rom with latest XIP. New XIP is much faster.
i use v4.1.13.60_03.18.90
I have never noticed this distortion you mention
I can tel you why I never did continue cooking. There are three reasons:
1) I simply got tired. It is in fact a quite annyoing process. Espacially working on a 96dpi ROM, everytime you fixed something another problem turns up.
2) I experimented with OSs on my computer (from XP to Vista to Server 2008 to Vista and in the end of the week back to XP - the switching back is due to hardware problems) lol And cooking under anything else then XP is not quite safe and I experienced more problems under Vista!
3) Nobody ever requested a new updated Lite ROM (at least until now ^^) because people usually just download the stuff and don't report back unless there is a problem (you get sick of that too!)
Hey I will have time next week, so I will probably make Lite 3.0 with new XIP...the problem is that I don't have the Sys and OEM folders anymore, so I will have to start from scratch...
frauhottelmann said:
I can tel you why I never did continue cooking. There are three reasons:
1) I simply got tired. It is in fact a quite annyoing process. Espacially working on a 96dpi ROM, everytime you fixed something another problem turns up.
2) I experimented with OSs on my computer (from XP to Vista to Server 2008 to Vista and in the end of the week back to XP - the switching back is due to hardware problems) lol And cooking under anything else then XP is not quite safe and I experienced more problems under Vista!
3) Nobody ever requested a new updated Lite ROM (at least until now ^^) because people usually just download the stuff and don't report back unless there is a problem (you get sick of that too!)
Hey I will have time next week, so I will probably make Lite 3.0 with new XIP...the problem is that I don't have the Sys and OEM folders anymore, so I will have to start from scratch...
Click to expand...
Click to collapse
Hmmm you are quite right about the feedback thing. If you work hard on something it no one appreciates it obviously it hurts.
Well atleast I will wait for your new rom. I hope you do something about java. Add jebed or provide link to cab for you new rom.
I did tried your rom, I would have kept it but new XIP is much faster so I had to switch.
@tipu2185;
While a radio in itself can't really damage your hardware, issues caused by it can. Such as high distortion and crackling, this can ruin a speaker. With the right software, hardware can be destroyed.
I've already re-assembled the Vox after replacing both the vibrate motor and the inner ear piece. It's fairly straight forward. I didn't bother to take any pictures as there is a service manual which indicates step-by-step how to do this.
h4waii said:
@tipu2185;
While a radio in itself can't really damage your hardware, issues caused by it can. Such as high distortion and crackling, this can ruin a speaker. With the right software, hardware can be destroyed.
I've already re-assembled the Vox after replacing both the vibrate motor and the inner ear piece. It's fairly straight forward. I didn't bother to take any pictures as there is a service manual which indicates step-by-step how to do this.
Click to expand...
Click to collapse
Can you link to that service manual. I might need it later some time.
Tipu2185,
How are you finding this radio version so far? Have yor initial problems gone?
2frustrated said:
Tipu2185,
How are you finding this radio version so far? Have yor initial problems gone?
Click to expand...
Click to collapse
Yes it is working fine now
Where?
I want to installl Radio v4.1.13.60_03.18.90, but I can't find it anywhere. Anyone care to provide a download link?
Thanks!
DUTCH said:
I want to installl Radio v4.1.13.60_03.18.90, but I can't find it anywhere. Anyone care to provide a download link?
Thanks!
Click to expand...
Click to collapse
check the wiki in first two sticky threads. It is there
tipu2185 said:
check the wiki in first two sticky threads. It is there
Click to expand...
Click to collapse
I searched for 20min and finally found it! http://forum.xda-developers.com/showthread.php?t=402778
Thanks!
I think this might have been covered before :lol:
Got a Wizard here that came with WM5 from o2 a few years back, its a work phone so doesnt get a massive amount of hammer but its slow, dead slow.
I just want something really small and quick, phones always on charge unless I'm out and about which isnt that much so perhaps oc'ing it might help?
I downloaded a WM6 rom by mfrazz (5.2.318(15342.4.0.01)) about a year ago and yes it looks nice and does more than the Wm5 that was on the phone to start with, but its irritatingly slow, I'm using the phone more than I was originally so it makes speed more of an issue.
I tried to flash a rom called "Wizard_19855_Clean_V1" but now I seem to have lost the phones ability to find a service.
The phones not bricked so I presume all is not lost but a quick shove in the right direction would be appreciated, the other option of course is to stick WM5 back on it if someone has a link to the latest (last?) o2 WM5 rom, then drop it down the stairs or something and get a new work phone perhaps :lol:
Nevermind, almost perfectly timed, 83% through flashing the phone with the 6r5 rom from Mfrazzz we've just had a power cut...
So, what do people recommend as a replacement to a bricked Wizard lol...
it is not dead. can be revived. well, if you want it to be.
get your power turned back on, then put it in bootloader after charging it completely and flash again.
I can get the bootloader RGB screen, have tried the solution here http://forum.xda-developers.com/showthread.php?t=276963 but get the "You didn't get the proper security level to download a specific image" error, just trying to sort that out now, phones on charge while I dig out the solution to that now, something to do with it being locked seems to be the problem, will see how far I get and then try again..
38% thru reflashing with the Update Utility File thing...
See if we can keep power in the building this time
Right, were back on WM5 thanks to the Wizard Love rom, when I try to stick mfrazzz's 6r5 on tho it gets to 99% and then fails, have tried it a few times now but with the same results..
try a release like amp(linkage) or a tnt thats known for speed. Ive been using amp's newer release for months on att's network, with strong service and considerable speed boosts over the older faria/mrfrazz roms i used
i have yet to need to oc this amp build but was a pretty avid overclocker of my older ones.
ps: im prolly going to cook/flash this rom when release 2 comes out(hopefully tonight) cleaner slate than amp
http://forum.xda-developers.com/showthread.php?t=415157
pss: if you're not.. try flashing with no sd card too
Yeah not got the SD in there when flashing, I've tried a few different ROMs now and it looks like I missing something as it still appears to be on the Wizard Love WM5 rom even though I'm trying to get it up a WM6 rom (Brightrom/Manilla UI/XM6r5)..
Will try the one you've linked too and see how that goes..
Somethings not right here, I've gotta be doing something wrong, usign shell tool it tells me that the Wizard Love rom has the following.
Externsion ROM
OS
GSM
Splash Screen
HTC Logo
Yet the other rom's I've been trying only appear to be the OS, and even though they seem to be uploading to the phone properly when i reset it it still has the Wizard Love rom on it..
Hello, I have an Axim X51v that I bought off someone who didn't want to deal with it anymore. Anyway when you turn it on it hangs at the dell logo or sometimes at the windows start up logo, rarely it makes it into windows but it freezes up after a little while. I've tried flashing several different roms on it (so did the previous owner) but each time it's the same result. I've checked diagnostics mode (record+power+reset) and everything seems to check out (flash has a green zero) and every time I flash a rom it makes it through without any problems. Also the bootloader is a10_g3 is this version known to be unstable? Could it be flashed wrong? That's the only thing I can really think of.
You know this forum is for HTC devices?
Im not familiar with Dell PDA's but i cant imagine flashing roms willy nilly will work on a dell which are designed for HTC devices. Give me a link for the ROM which you are currently trying to use.
Have you tried flashing original rom back on, thats wm5 yes?
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
We don't frown upon answering questions for other devices. This forum is meant to help people. If you can get your answer here.. cheers on that.. hope you will.
mbannick said:
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
Click to expand...
Click to collapse
sorry wasnt meaning to sound sarcastic, ive had some experience of axim but mostly wm5, just wasnt too clear on ur issues, what exactly happens? you say it freezes but what do you do that makes it so?
Well that's the thing it freezes randomly, even just sitting there it will freeze. I want to say its the flash but every time I check it the test comes out clear. So the the only thing I can think of is the bootloader is messed up.
Ive just been to the dell support site and wow, alot of un happy people, i can see why your friend didnt want it anymore...
After doing some reading there i can only suggest you download their official rom and rom updates and see if you can get it running normally. What i dont understand is flashing a new rom should clear everything, i dont think it is the bootloader if the system boots up fully correctly, it has to be a rom issue (or hardware of course).
check out these sites, doesnt make good reading im afraid :
http://search.euro.dell.com/results...~srd=False&ipsys=False&advsrch=False&~ck=anav
http://en.community.dell.com/forums/3530.aspx?PageIndex=2
good luck and let me know how you get on.
Well as I said it takes several tries to get into windows (sometimes it wont work at all until I leave it without the battery for an hour or so) so its not booting up normally at all . Anyway I had the wm5 a12 rom on there for a while but it still has the same problems (I used sd flash since I really cant sync and flash with the way it freezes). So yeah I'm not sure what I can do
mmm.....
If youve had several different roms on it, including official ones, it could mean a hardware problem too.......
Im no chef, but i would have expected a bootloader issue to be resolved with a known working official rom?
How old is the Dell? Just a thought, have you tried the online help with a technical rep from Dell, they were good when trying to sort out an issue with my 4 year old laptop? Sorry but im running out of ideas........
Hey I think I got it! Seems the previous owner modified the battery latch. After messing around a bit I stuck a toothpick on the "button" that is depressed when the door is closed and it seems to be running perfectly stable! I even did a few resets and each time it boots just fine. Thanks to everyone who replied and offered advice.
hoorah! saved by a tooth pick, now ive heard it all haha. congrats!
Hello all, I have a couple questions about the WP7.8 Sianto Edition for the HTC Arrive. I have the Sprint Arrive and am considering putting this rom on my phone. First I would like to know if anyone knows what kind of unlock it has, if any. Also, does the USB Tethering work in the 1.6 for the Arrive? I see it listed for the 1.6.1 for the 7 Pro..
And does anyone have any input on how reliable this rom is? I am looking for forward to the 2.0L that is said to be coming soon. As of late my phone has gotten so slow and my data connection speed is terrible lately. It seems every week it gets worse and I am having many apps just crash to the home screen and apps that rely on the data like radio apps just take forever to even open now. My wife has this same phone on the same network and hers is not having any of these issues.
Thanks for your replies.
Anyone know? Planning to download the rom tomorrow but want to know about the unlock first. I have yet to HSPL my phone but will when I have all my questions sorted out.
Hi mate!
Concerning the slow speeds, if you upgraded your phones memory by swapping the sd card, the two can be related (for example, my youtube videos are very sluggish while streaming). I Have an international 7 pro (no carrier branding) and it's been 10 months since my last hard reset (when I upgraded the memory from 8 to 32 gigs) and i am also experiencing very slow load times, but I don't know about the apps crashing. Data loading is also a bit slow on my side (on some apps while refreshing) but internet explorer just works fine.
But I remember the phone working just fine right after the memory upgrade, so my guess is that constantly adding and erasing apps and files like videos, music and pictures are kind of messing up the responsiveness of the system.
PS: Sorry for my response not being specific enough to your case. I didn't want to reply at first but since the 7 pro forums aren't much populated lately, I thought that my idea on the subject could help.
true2you said:
Hi mate!
Concerning the slow speeds, if you upgraded your phones memory by swapping the sd card, the two can be related (for example, my youtube videos are very sluggish while streaming). I Have an international 7 pro (no carrier branding) and it's been 10 months since my last hard reset (when I upgraded the memory from 8 to 32 gigs) and i am also experiencing very slow load times, but I don't know about the apps crashing. Data loading is also a bit slow on my side (on some apps while refreshing) but internet explorer just works fine.
But I remember the phone working just fine right after the memory upgrade, so my guess is that constantly adding and erasing apps and files like videos, music and pictures are kind of messing up the responsiveness of the system.
PS: Sorry for my response not being specific enough to your case. I didn't want to reply at first but since the 7 pro forums aren't much populated lately, I thought that my idea on the subject could help.
Click to expand...
Click to collapse
thanks for your reply, i was starting to think i wasnt getting one! lol but yea my phone is very slow compared to my wifes phone and has been since i got it. before the mango update it was laggy just scrolling on the Start screen. im hoping it is just the ROM that came on the phone, so thats partly why i want to update to the 7.8.. also i want the unlock benefits, but i cant seem to find if the Sianto ROM is unlocked or not.
x_orange90_x said:
thanks for your reply, i was starting to think i wasnt getting one! lol but yea my phone is very slow compared to my wifes phone and has been since i got it. before the mango update it was laggy just scrolling on the Start screen. im hoping it is just the ROM that came on the phone, so thats partly why i want to update to the 7.8.. also i want the unlock benefits, but i cant seem to find if the Sianto ROM is unlocked or not.
Click to expand...
Click to collapse
For one, yes, the Sianto ROM IS unlocked.
And for another, the first time I loaded the Sianto ROM on my phone, it was at v1.4, I believe. After going through the steps, my phone was it's fastest ever, and I loved my phone even more than when I had first gotten it. Things were great for about a week, until tragedy struck: an app I installed from the Bazaar marketplace while at school basically bricked my phone. So, I borrowed a friends phone, let people know I would be incommunicado, and waited out the day. When I got home, I immediately came here to XDA, and tried to remember which ROM I had loaded, but wasn't able to get the same computer I had originally used. I remembered Sianto's name, but then saw ansar's ROM, and decided to try that one.
Long story fairly short: I switched back to Sianto after about a day, and haven't looked back since.
I don't know about USB tethering, but the internet sharing works in v1.6, and I especially like that Digital Power was added to the Settings. Every time I flashed my phone before, I had to reinstall Digital Power, but not with this version!
All in all, I wholeheartedly recommend Sianto v1.6, and I know that when v2.0L comes out, I'm definitely going to flash it.
Hope I helped.
evath said:
For one, yes, the Sianto ROM IS unlocked.
And for another, the first time I loaded the Sianto ROM on my phone, it was at v1.4, I believe. After going through the steps, my phone was it's fastest ever, and I loved my phone even more than when I had first gotten it. Things were great for about a week, until tragedy struck: an app I installed from the Bazaar marketplace while at school basically bricked my phone. So, I borrowed a friends phone, let people know I would be incommunicado, and waited out the day. When I got home, I immediately came here to XDA, and tried to remember which ROM I had loaded, but wasn't able to get the same computer I had originally used. I remembered Sianto's name, but then saw ansar's ROM, and decided to try that one.
Long story fairly short: I switched back to Sianto after about a day, and haven't looked back since.
I don't know about USB tethering, but the internet sharing works in v1.6, and I especially like that Digital Power was added to the Settings. Every time I flashed my phone before, I had to reinstall Digital Power, but not with this version!
All in all, I wholeheartedly recommend Sianto v1.6, and I know that when v2.0L comes out, I'm definitely going to flash it.
Hope I helped.
Click to expand...
Click to collapse
Thanks for your reply! That's exactly the response I was looking for! Glad to know that it is unlocked and that you got a performance boost out of it. I get internet hooked up on Monday so I will be downloading and flashing around then!
Thanks again
x_orange90_x said:
Thanks for your reply! That's exactly the response I was looking for! Glad to know that it is unlocked and that you got a performance boost out of it. I get internet hooked up on Monday so I will be downloading and flashing around then!
Thanks again
Click to expand...
Click to collapse
No problem, hope everything goes well. Let us know how it turns out! :good: