benefit of upgrading ipl, spl, radio - JAMin, XDA Neo, S200 Software Upgrading

hi, i have a G3 prophet but my ipl, spl, and radio version is kind of a decade old (version 1.xxxx). i've just upgrade my prophet to PDAVIET 4.0.0.4 WM6 and everything seems to run fine, except some wifi connection drop problem and mms problem, do i need to upgrade my ipl, spl, and radio?
what is actually the direct benefit in upgrading them?
thank you very much.

I am also very interested to know what the direct benefits are. I'm running a G4 @ 2.13.0001 ipl and spl.
I've been looking around for info on how to upgrade / where to get upgraded files, and what the point is, but haven't found any good info.
I see there is an IPL upgrade to 2.20 stickied in this forum. Will it also update SPL? If not should SPL be updated? Can IPL 2.20 be used with spl 2.13? Can someone please post some info on this stuff, as its the one thing I really know nothing about.
Thanks guys.

Same, is it usefull to upgrade Radio Rom ?

radio rom should be very useful, becouse it's in charge of the gsm module and all that stuff.
but i don't know what spl is neither ipl and i want to know.
thx and hello!
la lengua hispana tiene algo de fuerza aqui?
been a reader for a while...

i'm living in HongKong, and currently having PDAViet 4.0.0.3 running on my 818pro. I had try different Radio Rom from original v2.19.21 to v2.69.21, and found that simply the latest v2.69.21 is not the best for the area, i cannot send sms and bettery running fast, and end up using the v2.61.21. so i guess the best way is to try them one by one, since update Radio Rom will not affect your system(its simply like the driver for your computer device, it won't touch your personal data).
and for the IPL & SPL, i've upgraded the IPL from v1.00 to v2.20, but do not notice any difference...

I am using 2.47.21. This is quite bad in my area. I keep losing signal where other phones (Nokia, Samsung etc) on the same network still have 1 or 2 bars... I'm gonna try 2.69.21

"Si no recuerdo mal las siglas corresponden a Initial Program Loader y Secondary Program Loader. Son las dos rutinas que se encagad de que el PocketPC pueda arrancar, contiene el código necesario para iniciar la carga del SO y la inicialización de los dispositivos básicos para que esto pueda suceder. Su única función es iniciar el dispositivo, después se pasa el control al sistema operativo. Lo mejor es no tocar el IPL/SPL ya que es la causa número 1 de pisapapeles y no mejoran en nada el funcionamiento una vez iniciado el PocketPC."
Basically IPL and SPL acording to this from somwhere google found, mean initial program loader and second program loader...

i upgraded to ipl/spl 2.20 from 2.09 and now the system boots much faster. and i think it responds a little better.
radio rom 2.47 seems to work perfectly for me (at 1800 mhz) i think it solved a bluetooth transfer problem (can't confirm) and it does not drain my batt.

IPL/SPL is like BIOS
IPL init Hardware
SPL is the Bootloader ... he jumps in the OS after Access the DOC he also starts the radio on the 2nd cpu core.
newer IPL/SPL is for system start speed up ... some hardware issue ...
Radio rom ... Provider network compatiblity

would updating ipl/spl need a hard reset?
thanks

no ... you doesnt need hard reset.

wanwarlock said:
would updating ipl/spl need a hard reset?
thanks
Click to expand...
Click to collapse
i guess your question is concerning data on your device.
when flashing ipl, spl, os, gsm, splash screen, last command is ResetDevice.
device will reboot.
with ipl, spl, splash screen, gsm data flashing, your data on device will remain intact.
when you re-flash os DOC will be re-initialized, you will lose data (except data stored on a card of course).
regards,
re: one of the reason when manufacture upgrades spl is improve security.
you will not notice dramatical change (read any change) by re-flashing ipl, spl.

fdp24 said:
i guess your question is concerning data on your device.
when flashing ipl, spl, os, gsm, splash screen, last command is ResetDevice.
device will reboot.
with ipl, spl, splash screen, gsm data flashing, your data on device will remain intact.
when you re-flash os DOC will be re-initialized, you will lose data (except data stored on a card of course).
regards,
Click to expand...
Click to collapse
ok upgrading ipl/spl would not cause a hard reset i.e. lose the data on my device, sorry for n00b question

Related

PLEASE need help, i brick my vox

Hi all,
I do a lot of flashing my vox with no problems...
but today i tried to flash it with a rom i dl, and now my vox never start
i can't do a hard reset (cause no rom inside now)
i plug the usb, turn on with the camera button, i'm on the screen red green blue, but when i try to flash it again, i've got an error..
or UPDATE ERROR or INVALID VENDER ID
depends wich rom i try to flash
I don't know what to do .... i'm so sad
please all, HELP ME ....
i'm searching a solution...
cause i want unbrick my vox
i find in other smartphone or pda phone that i need a NO ID update utility
like : ROMUpdateUtility_Wizard_NoID.exe
but for the VOX.
can someone help me please ?
UP .
i'm sorry but i really need someone to help me
Just reflash with your official rom at member.htc.com and you're done
there is no offiicial rom avaible, or i cant find it
cause my phone isn't a branded phone
i've a french sfr S710
EDIT :
i don't think that will work. i think my phone had his ID change so the best way is to have an updator with no_id.
is it possible ?
Did you try this?
Or ask Dr Gonzo! in french as you want
it's 3 part in .raw
i don't know what to do with this
Bonne raison pour t'acheter un iphone!!! lol
Sinon rends toi dans le magasin SFR le plus proche, que dire de plus.
sinon demande à quelqu'un de dumper son htc s710 SFR pour toi
okay first of all calm down.. your vox is far from bricked.. As long as you can get into the bootloader its not a very big deal..
What is the exact name of your model ? Is it a HTC S710 or SPV E650 or ?
Let me see if i can find the HTC rom and i will report back.. You need to flash that rom while the usb cable is plugged to the phone and your in the bootloader! Active sync won't connect, but that dosn't matter.. !
ok mine is a HTC S710 from SFR
i know iit will be ok by the bootloader, but i try lots of rom and nothing
i dont know where to find an official rom
@seudeman :
Mon bosse en a un d'iphone je vai lui echanger il y verra ke du feu
Exact, vu que les deux se ressemblent hihi!
Tu n'es plus tout seul on va t'aider
secable said:
ok mine is a HTC S710 from SFR
i know iit will be ok by the bootloader, but i try lots of rom and nothing
i dont know where to find an official rom
@seudeman :
Mon bosse en a un d'iphone je vai lui echanger il y verra ke du feu
Click to expand...
Click to collapse
Okay here you go found the newest official update from HTC
http://www.mypageofmanythings.com/files/RUU_Vox_HTC_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe
Download it.. Now follow these steps
1. Restart your computer !
2. Turn of the Vox completely (just remove and reinsert battery)
3. Wait untill the computer is started up and ready
4. Hold down camera button, insert usb cable, that is connected to pc, and keep holding it down untill you enter the bootloader
5. Now Active Sync won't start syncing, but you should hear the windows usb connection sound.
6. Launch the RUU and follow steps, just remember that an active sync connection isn't nesessary to flash the rom.
That should work. If not write back then i have another solution..
ok snifff
the same again
INVALID VENDER ID
... i need help
even i can try to send it in garanty ???
UP for today ?!!?
'cause i'l send it in garanty this afternoon...
so if someone have a solution
HardSPL FTW! Too bad none for us right now. USPL is good enough. Anyways...
When you start up into bootloader, either post a picture or copy down the versions and identification numbers and post them here so we have a bit more information.
I think we might need to patch and re-checksum an official ROM for your botched CID.
hi thx
so i cant put a picture.
here is the numbers :
ONBL 1.34.0000
SPL 1.34.0000
CPLD - 04
it's all i have on the bootloader screen
thx a lot helping me
EDIT :
this afternoon i can have the same phone like mine in hands.
maybe there is a way to back the rom of that one and flash into mine ??
but i'm not sre it's the same version of SPL or something else
Sry i didn't post yesterday went to bed..
But there is still a 2 solutions.. The one of them is if you get the INVALID VENDOR ID you could try TyphoonNBFTools and open the rom with it.. When you launch the update utility it will extract some files.. Those a usually located in the temp folder of your pc . You will need to edit one of these files BEFORE your begin the flash.
Get TyphoonNBFTools and open the *.NBF file from the temp folder on your pc with it. The RUU will be open in the background but that dosn't matter
Now when you have opened the NBF file with TyphoonNBFTools go to the Operator line and DELETE the contents in it! Save the file, close TyphoonNBFTools and continue the RUU ..
Now that you have removed the Operator code in the rom, it won't come op with the Invalid vendor ID error..
The other easy solution, is to flash the USPL located on top of this forum and after that reflash your rom. That should work right away!
ok i try
for the USPL rom on top of the forum i tried it doesn't work
i try TyphoonNBFTools
secable said:
ok i try
for the USPL rom on top of the forum i tried it doesn't work
i try TyphoonNBFTools
Click to expand...
Click to collapse
If you need any help with it write here .. It can be a little complicated the first time you try it

Urgent - HTC P4351

Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
????
Did you try a hard reset?
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
What do you mean by "I execute Remove hard SPL?
Do you have a herald or a wing? or an Atlas? What version of WM did you have? Did you try to flash it if yes with what and how?
Yes i try a hard reset.
I execute a Remove_HARD-SPL_On_The_Wing to try reconfigure my phone.
i have a wing.
i cant do anything, and not detect my phone on computer.
i think isn´t with SO.
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
don't panic.
get your phone into bootloader mode,by pressing and holding camera button, while pressing reset button. your device's screen will become tri-colored, and connection with pc will lost. next, you should run this file
http://www.megaupload.com/?d=1OTD3E3M.
at the end, the official t-moble rom will be on your device.
good luck.
ok i try it but, give a error [294] : INVALID VENDER NUMBER
This update Utility cannot be used for your PDA Phone. Please check your Update utility.
BTVDV:69-HFTD56670-HFTD56670-T.0RF577-HFTD56670
Tks.
PS: My cell phone is from brazil.
Willian Massaki said:
ok i try it but, give a error [294] : INVALID VENDER NUMBER
This update Utility cannot be used for your PDA Phone. Please check your Update utility.
BTVDV:69-HFTD56670-HFTD56670-T.0RF577-HFTD56670
Tks.
PS: My cell phone is from brazil.
Click to expand...
Click to collapse
search google or this forum for another "official herald rom".
ok, thanks very much...
so if you find anything. please,post here..
thanks
this is what you need
http://www.mediafire.com/?2nq9iu0a2nt
download it, run it when your device is in bootloader mode, and save it on your pc
... don´t function, give me a some error.
i try many rom, but i cant. i think is my phone. Brazil - Tim.
i dont find this rom.
Please help me.
HTC from brasil, dont can help.
Did you try the search term"I bricked my wing" on this site? There are alot of results that you can use to bring back your phone to its original official t-mobile rom..It happened to me along time ago .
Yes, i try it. but it don´t work. give me a erro. i think my htc is lock to recived other rom, that default system, PT - brasil - tim. If help, my serial Number is BZ741G201397.
Thank´s
My
Ipl 4.18.0002
Spl 4.18.0000
Guys, his phone is from Brazil, using a provider named TIM (it is NOT the same as t-mobile).
@Willian Massaki :
Em Portugues : da uma olhada neste link (http://forum.xda-developers.com/showthread.php?t=389121), Phunxx tambem tem um P4351 da TIM e este usado a ROM Open Touch 4.0 sem problemas, vale a tentativa.
In English : have a look at this link (http://forum.xda-developers.com/showthread.php?t=389121), Phunxx also has a P4351 from TIM and is using the Open Touch 4.0 ROM without problem, might worth a try
Massaki,
(faz tudo no bootloader jah q o seu win jah tah com flash errado)
primeiro da hard spl pra dexa o spl em 4.xxx.yang
tuto do aserg policies e do hspl(http://forum.xda-developers.com/showthread.php?t=358615)
Dps disso da flash nesse aqui:
http://forum.xda-developers.com/showthread.php?t=437385
usa o flash center (http://rapidshare.com/files/79249048/Flash_Center.rar)
Espero q de certo
Hi,
didn´t work. =(
1 - I cant use active sync.
2 My phone is Brazil - TIM - HTC - 4351 - ATLAS.
I need a Original TIM BR ROM. I request to phunxx, if he has...
Thanks.
RELAX
Hi, do you try to start the bootloader an after that install any rom for this model (atlas, wing, p4351 is just the same!!!) this also happen to me when I try to unlock it (two times, one for Tmobile's phone and one on AT & T's) and that happen because I try to unlock it before install a new rom (I guess). just try:
1) connect the phone to the pc. (turned on)
2) press camera button firmly and then the reset button
3) the bootloader must start now and the message "usb" should be in the botom of the three colors screen
4) run the rom and follow the instructions on the pc.
I hope you cans solve this issue, good luck!!!

CyanigenMod - VOICE [ NO ] DATA [ YES ] - WHY?!?!

I installed Cyanogem in my Defy and everything ran just fine until yesterday...
No changes at all, and the signalwas gone. No bars. I tried to call and there were no signal to complete. BUT I CAN USE 3G CONNECTION!!!
I reinstalled original SBF, y-SBF, z-SBF, delta-SBF, other roms... Nothing changes. I just have connection, not voice.
Any idead how to fix it?
Install Baseband Switcher and try to change your baseband
E qual opção eu escolho?
Abraços
Qual a sua operadora? Aqui tem a opção Brazil Claro. Mas vc pode tentar o Internacional ou Argentina. Ou perguntar pra alguém do forum que utilize a sua operadora...
abs!
"Sou da TIM. Já tentei Brazil Claro e não rolou..." -> I'm TIM user. I've already tried CLARO BRAZIL and didn't worked...
ehy guys english please!!
erickne said:
E qual opção eu escolho?
Abraços
Click to expand...
Click to collapse
Try the China basebands or US T-Mobile basebands.
the two worked for me.
None of them worked. Tmobile almost worked but failed. Anything else
What is the Original ROM com with your Defy ?
And it's a MB525 or ME525 ?
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B15VIVBRLA019.0R_JORLAFROVIVBRLA_P012_A012_M002_HWp3_Service1FF.sbf
I'm not sure, but I think is this SBF.
Model MB525.
If you flash the recommended SBF, it will work without any changes in baseband. Try nordic first.
And always talk in english in a english forum
I will try nordic them stock.
One thing... With defy baseband change, when I select a different one (ANY of them - I tried all of them) it simply don't change. When I check baseband it's always EPU93_U_00.59.00.
Any Idea?
erickne said:
I will try nordic them stock.
One thing... With defy baseband change, when I select a different one (ANY of them - I tried all of them) it simply don't change. When I check baseband it's always EPU93_U_00.59.00.
Any Idea?
Click to expand...
Click to collapse
That is normal, and cosmetic. The files do change, trust baseband switcher.
ccav2000 said:
That is normal, and cosmetic. The files do change, trust baseband switcher.
Click to expand...
Click to collapse
a lot of my fellas here in manila had that prob before after they migrate to official SEA FROYO
now its ok after they do the baseband switching.
I flashed NORDIC, and had no connection. Now flashed Brazil Retail without success, but the radio bar is full and says "Only Emergency Calls". If I try a normal number I get "There are no network available". And I still get data connection online.
Please, any idea?
I'll start a challenge for U$25.00. =)
Nothing worked.
Any idea?
Already flashed chinesa, nordic, retail, t-mobile, change sim card, changed all basebands.
What is happening?!
That sounds like what happens if your IMEI is blacklisted - no phone calls or text messages will work, the phone will report "no signal" or "emergency calls only" but data still works.
Hopefully that isn't what has happened to you, but I thought I should mention it just in case
I've just answered your PM, but I didn't know you've tried stock SBF. Did you do a full wipe after flashing it? If yes, then you should try your SIM with another phone. If it works, you probably have either a hardware problem with your Defy (but I'm not sure if Data would work, and it does...), or a blacklisted IMEI, as said the friend above. Either way, have you bought your phone in an official store? If yes, you can also flash your carrier's stock sbf and complain with them!

[Q] Combine two ROMs (taking best of each ROMs)

Hello!
I have two ROMs (both rooted) for my Galaxy S6 edge SCV31 (SM-G925J)
First ROM has all languages enabled (wich i need) and works very good. But it only has data. It says "4g" and "No Serrvice" at the same tiem. I did not even know that is possible. I can browse internet and use data, but i can not make calls at all and noone can call me.
*#*#4636#*#* gives me Mobile network not available. attached jpg is from the ROM where calls do not work
Second ROM works for both- calls and data. But does not have languages and tweaks i want from the first ROM.
i tried to install second ROM, backup radio, and then restore the radio when first ROM is isntalled, but that did not help.
Is there any way i can take languages from one ROM and include them in the other? Or maybe there is a way to take Network settings from one ROM and include them in the other, so that i can get best from both?
Please let me know.
I have
- Windows but i can boot to Linux if necessary
- root for both ROMs
- TWRP 2.6.8
- Titanium backup.
- Recovery Backup
- can use ADB
Anyone?
Did you try this;
https://play.google.com/store/apps/details?id=com.wanam
Thank you for you reply.
Unfortunately, language enablers like MoreLocale, or LanguageEnabler or any other like the one you suggested do not work, because the languages are not just disabled. They are stripped off (deleted) completely. Therefore there is nothing to enable. (this was the first thing i tried)
Thanks anyway for suggetstion
forumber2 said:
Did you try this;
https://play.google.com/store/apps/details?id=com.wanam
Click to expand...
Click to collapse
umka83 said:
Thank you for you reply.
Unfortunately, language enablers like MoreLocale, or LanguageEnabler or any other like the one you suggested do not work, because the languages are not just disabled. They are stripped off (deleted) completely. Therefore there is nothing to enable. (this was the first thing i tried)
Thanks anyway for suggetstion
Click to expand...
Click to collapse
Hi Umka83.... Maybe i can help you! Can you give me the link of the second rom? I already build a lot of rom's for japanese Samsung devices and add languages to all of them. On my first try on building an custom rom for this model (SCV31), i have the same issues. I got the 4G and signal bars, on status bar. I can access the internet, but i can't make calls, because the device not connect to au network, resulting in No service. You have tested the sms too on the second rom? All au devices on Lollipop, are having issues with sms on custom roms. Can send sms but takes a long to receive. I notice, If i disable the data network, no issues on receiving sms.
Hello Frankbrazillian!
Thank you for yyour reply.
Here is the link for the ROMs
https://drive.google.com/folderview?id=0B3bSQBt3ttI2RUpHa1RCVFFXUUE&usp=sharing
If this can be made into a new ROM that would be great for all SCV31 users.
ありがとうございます。
umka83 said:
Hello Frankbrazillian!
Thank you for yyour reply.
Here is the link for the ROMs
https://drive.google.com/folderview?id=0B3bSQBt3ttI2RUpHa1RCVFFXUUE&usp=sharing
If this can be made into a new ROM that would be great for all SCV31 users.
ありがとうございます。
Click to expand...
Click to collapse
Thanks my friend! I'll check the link tonight, after work. I forget to ask.... The second rom is an custom firmware too or is the stock? If are an custom rom, I only need 3 days to finish the work, but If are the stock version, unfortunatelly this don't help too much, because I already tried once and failed. After that, I don't have tried anymore, because I was very busy customizing roms for others devices... Anyway I'll let you know ... thank's for share the rom!
Frankbrazillian said:
Thanks my friend! I'll check the link tonight, after work. I forget to ask.... The second rom is an custom firmware too or is the stock? If are an custom rom, I only need 3 days to finish the work, but If are the stock version, unfortunatelly this don't help too much, because I already tried once and failed. After that, I don't have tried anymore, because I was very busy customizing roms for others devices... Anyway I'll let you know ... thank's for share the rom!
Click to expand...
Click to collapse
Dear Frankbrazillian!
Thank you for your reply!
SpaceX ROM (SPACEX.SCV31KDU1AOE2_PRE-ROOT.tar.md5) is a custom ROM from here
http://choimobile.vn/threads/spacex...-fix-all-stable-s6-edgeau.57102/#post-1109235
The other ROM (SCV31KDU1AOCP_SCV31KDI1AOCP_SCV31KDU1AOCP_HOME.tar.md5) is a stock one from OTA by KDDI
umka83 said:
Dear Frankbrazillian!
Thank you for your reply!
SpaceX ROM (SPACEX.SCV31KDU1AOE2_PRE-ROOT.tar.md5) is a custom ROM from here
http://choimobile.vn/threads/spacex...-fix-all-stable-s6-edgeau.57102/#post-1109235
The other ROM (SCV31KDU1AOCP_SCV31KDI1AOCP_SCV31KDU1AOCP_HOME.tar.md5) is a stock one from OTA by KDDI
Click to expand...
Click to collapse
Thanks for reply, my friend. I got it! I'll see what I can do... About the custom rom SpaceX, I don't have tested yet, but I already know the work of this Team (Sphinx). I have tested the custom rom for the Galaxy Note Edge-SCL24. I see on choimobile homepage. The dev Manh_IT , already unlock this model, but i'm not sure if is necessary some kinda of box. Any news, i'll let you know... thanks again!
Frankbrazillian said:
Thanks for reply, my friend. I got it! I'll see what I can do... About the custom rom SpaceX, I don't have tested yet, but I already know the work of this Team (Sphinx). I have tested the custom rom for the Galaxy Note Edge-SCL24. I see on choimobile homepage. The dev Manh_IT , already unlock this model, but i'm not sure if is necessary some kinda of box. Any news, i'll let you know... thanks again!
Click to expand...
Click to collapse
i have tested SpaceX. I have Data, but no calls can be made for some reasons. Not sure why.
Thanks for reply
umka83 said:
i have tested SpaceX. I have Data, but no calls can be made for some reasons. Not sure why.
Thanks for reply
Click to expand...
Click to collapse
Last night i have tested the SpaceX rom and like you said, not working. I have tested the stock rom too and i notice, even doing any changes to system.img, just mounting the img to edit, i got the same problem. I think is dm-verity verification related. I will try to disable the dm-verity on boot.img to see what happens. Any news, i'll let you know.... thank's again, my friend!
Frankbrazillian said:
Last night i have tested the SpaceX rom and like you said, not working. I have tested the stock rom too and i notice, even doing any changes to system.img, just mounting the img to edit, i got the same problem. I think is dm-verity verification related. I will try to disable the dm-verity on boot.img to see what happens. Any news, i'll let you know.... thank's again, my friend!
Click to expand...
Click to collapse
Thank you for looking into this for me and other SCV31 users. I owe you one.
Good luck
umka83 said:
Thank you for looking into this for me and other SCV31 users. I owe you one.
Good luck
Click to expand...
Click to collapse
It's not just for you and the other users... It's for me too! Thank's! I will do my best to finish this rom, without any issues and i will share with all scv31 users. Thank's for helping me..
umka83 said:
Thank you for looking into this for me and other SCV31 users. I owe you one.
Good luck
Click to expand...
Click to collapse
Hi umka83! On my first try to build an boot.img with the dm-verity disabled, i failed! Still trying and testing. If i got everything working perfectly, i'll tell you. Have a good day!
Thanks for keeping us updated. you work is highly appreciated. ありがとうございます。
HELP
bom dia Frank, sou novo por aqui, então me desculpe se estou violando alguma regra..
só queria dizer que tenho um galaxy s6 da AU e estou ancioso pela rom scv31 ..
pena nao ter o idioma Portugues..
qualquer novidade nos comunique por favor..
umka83 said:
Thanks for keeping us updated. you work is highly appreciated. ありがとうございます。
Click to expand...
Click to collapse
Hi umka83. Unfortunatelly no working yet. Still in progress. I'll send you the link of the custom ROM on PM, for you check the progress. Any news, I'll let you know. Have a good day !
---------- Post added at 10:45 AM ---------- Previous post was at 10:25 AM ----------
Reginaldo de Oliveira said:
bom dia Frank, sou novo por aqui, então me desculpe se estou violando alguma regra..
só queria dizer que tenho um galaxy s6 da AU e estou ancioso pela rom scv31 ..
pena nao ter o idioma Portugues..
qualquer novidade nos comunique por favor..
Click to expand...
Click to collapse
Hi Reginaldo, how are you? Unfortunatelly the custom rom is not working with Au sim card. If your device are unlocked, you can use with gsm operators . One of the xda rules, is the use of the english language. You can use some translator app for that purpose. Any doubt , feel free to ask.
Olá Reginaldo, tudo bem? Infelizmente ainda não é possível utilizar uma rom customizada, com o sim card da Au. Se o seu aparelho estiver desbloqueado, vc poderá utilizar com qualquer operadora gsm. Uma das regras do Xda, é utilizar o idioma inglês. Você poderá fazer uso de algum aplicativo tradutor. Qualquer dúvida é só perguntar.
someone try this way please
I only want to give a better instruction how to unlock this model.
First, of course, you need this great box, Z3X. Then you need SPT box to write super IMEI.
BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI
1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.
2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.
3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.
4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.
5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.
6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.
7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.
If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:
I could not post the link because I'm new on the site
======https://drive.google.com/file/d/0B7M...w?pref=2&pli=1[/url] Senha: fullscv31 ====
Reginaldo de Oliveira said:
I only want to give a better instruction how to unlock this model.
First, of course, you need this great box, Z3X. Then you need SPT box to write super IMEI.
BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI
1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.
2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.
3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.
4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.
5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.
6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.
7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.
If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:
I could not post the link because I'm new on the site
======https://drive.google.com/file/d/0B7M...w?pref=2&pli=1[/url] Senha: fullscv31 ====
Click to expand...
Click to collapse
I already have seen this method and is confirmed to work, but for this is necessary the Z3X and SPT box.
I have Z3X box, Can I buy the SPT but for that I need to know if this method is actually valid ..

MSM delete persist partition

SGreetings to all, I hope you and your family are well, the reason for this post is due to an incident that occurred with my op 8t two weeks ago i updated to android 12 "stable" and the first welcome screen was "download error" and i couldn't boot into anything other than fastboot and edl, i tried reinstalling oxyegenos 11 and still i had this screen, because some partitions were broken, i had to use MSM and activate formatting of all partitions, the problem: persist.img without backups, although it will try it could not do a backups, I just lost it since it is my personal phone, my question is, is there any way to recover it without oneplus technical support? In my country there is not and I cannot send my phone by correspondence. So tech support isn't even an option, or if possible can you share your persist.img backups with me? I will use only what is necessary to have fingerprint and l1 again since it is the only thing that what am I missing, or if you know any way to fix this problem please share it I can assure you that I am not the only one who has had this problem, thank you very much in advance.
Model: kv2001 12/256 green
I don't think you can restore contents of your phones persist partition without its backup.
Also by loosing persist.img contents your IMEI should be lost as well, so check for it as well.
But looking at your screens, i see you have cellular active, so it's not that bad in your case.
Don't try to restore persist.img backup from another phone, as i heard, it will hardbrick your device.
Try to make full reflash via MSM once again.
Rootk1t said:
No creo que pueda restaurar el contenido de la partición persistente de sus teléfonos sin su copia de seguridad.
Además, al perder el contenido de persist.img, su IMEI también debería perderse, así que verifíquelo también.
Pero mirando sus pantallas, veo que tiene celular activo, así que no es tan malo en su caso.
No intente restaurar la copia de seguridad de persist.img desde otro teléfono, como escuché, dañará su dispositivo.
Intente hacer una actualización completa a través de MSM una vez más.
Click to expand...
Click to collapse
hI have used MSM 2 other times, and nothing has worked as before, I repaired the imei with a tool that I found on xda, but sometimes it gets lost and I have to repair it again
Rootk1t said:
I don't think you can restore contents of your phones persist partition without its backup.
Also by loosing persist.img contents your IMEI should be lost as well, so check for it as well.
But looking at your screens, i see you have cellular active, so it's not that bad in your case.
Don't try to restore persist.img backup from another phone, as i heard, it will hardbrick your device.
Try to make full reflash via MSM once again.
Click to expand...
Click to collapse
I know how to open the persist image and occupy only what is necessary for fod, which is what worries me the most since I don't even have the Qualcomm services that take care of this

Categories

Resources