[RELEASE] ◄ Core PRO KITCHEN ► HTC WIZARD & MORE - 8125, K-JAM, P4300, MDA Vario ROM Development

Core Proffessional Kitchen
The most complex KITCHEN a begginer cook may ever need.
Base ROM :
* NO BASE ROM ! but ANY BASE ROM !
What's new ?
* EXTRACT ANY ROM FROM nk.nbf INTO .nb : OS, IPL...so on
* SUPPORT FOR CONVERTING THE DUMP INTO SYS AND OEM
* BUILD ROM
* SUPPORT FOR ROM Building x2 : FROM DUMP AND FROM SYS AND OEM PACKAGES
* FULL POSSIBILITIES
* LOTS OF PACKAGES (TAKEN FROM THE XDA-DEV)
* SUPPORT FOR HEX EDIT, CONVERTING HV, RGU..., WINIMAGE(for ext rom)
* SUPPORT FOR CERTIFYING dll, exe, mui...so on
* SUPPORT for OPTIMIZING exe,dll (dll doesn't really work nice..but the exe is great -2.4 MB PPT.exe->800KB same PPT.exe and it's working)
* FULL TADZIO Integrated
* EXTRACT XIP AND USE IT
* SUPPORT for SPLASHSCREENS
* SUPPORT for CABs , CAB MANAGER and soon HOW TO MAKE A PACKAGE
* SUPPORT for Package Creation - Initflashfiles.txt builder
* SUPPORT for REGISTRY EXTRACTION and FILE COMPARISON (really good to determine changes in the reg's hehe )
* All are packed really nice..centralised folders and a Panel with links ..to BUILD, EXTRACT..EXTRAS...All stepps are numbered from
1..to whatever so it will be foolproof ...BUT you MUST know how to count and read hehe
* Defenetively some other stuff that i don't remember now
Want to see more ?
Check my website : http://xcore.myftp.biz/
It's not finished yet...it took me more than i expected. But you can see the kitchen and tool explanations.
Important :
- I will upload all tutorials i can find to my webpage also my goal is to
answer there to almoust all questions that may possibly occure.
- I will give all that i learned to all the people that are willing to listen.
What's the best part ?
- IT CAN BE USED ON ANY DEVICE WITH VERY LITTLE MODIFICATIONS !!!!!
- NO LONGER LIMITED BY ANYONE OR ANYTHING.
- YOU CAN COOK ANY ROM YOU LAY YOUR EYES ON VERY EASY ( IT TAKES ME BELOW 20 min to Extract , moddify and flash back to device )
- IT HAS ADVANCED ERROR CHECK (as advanced as a batch can be )
What's included ?
* A full STEP by STEP Tutorial : HOW TO EXTRACT and HOW TO BUILD a ROM
Like i said above more tutorials will come soon :
* Page Pool Tutorial
* Package Maker Program with Tutorial
* HOW TO PORT Tutorial
and the list is not finished.
Download
HTC Wizard CorePRO Kitchen
HTC Hermes CorePRO Kitchen
HTC Artemis CorePRO Kitchen
* NOTES :
- Since I released it after a sleepless night i will call it RC1
- IF YOU DON'T SEE YOUR DEVICE ABOVE, BETTER TALK TO ME BEFORE YOU START USING IT
Special thanks :
* Papamopps - for real support
* nandlal_mk - for the XIP
* mUn - for finding the time to answer some of my questions
* molski - for i started working on his tools and still used some of them
* Tadzio - for his tools and patience
* bepe - for his tools
* the-equinoxe - for his splash screen tools
* naboleo - for his initflashfiles generator

great work anichillus, thankyou for sharing this with the community. I look forward to xploring your kitchen.

This looks great, I only have two questions, any issues in building the ROM or adding packages that have already had tadzio tools applied?
In your opening post you mentioned that you are able to use with any device with small modifications, what are these for a Hermes if any?
Thanks again for the new toy!
BTW, looks very professional and I love the web site, great explanations.

PLEASE NOTE THAT IT'S ORIGINALLY MADE FOR THE HTC WIZARD
I KNOW THAT IT WORKS ON OTHER TOO WITH LITTLE MODDIFICATIONS BUT I SUGGEST TO ASK ME FOR A VERSION SPECIFFICALLY.
Follow originally thread here :
The HTC Wizard side of the forum
http://forum.xda-developers.com/showthread.php?p=1287430#post1287430
Lurch3559 said:
This looks great, I only have two questions, any issues in building the ROM or adding packages that have already had tadzio tools applied?
In your opening post you mentioned that you are able to use with any device with small modifications, what are these for a Hermes if any?
Thanks again for the new toy!
BTW, looks very professional and I love the web site, great explanations.
Click to expand...
Click to collapse
None that i know of. It shouldn't have any problems.
But i strongly reccomend that if you don't have a HTC Wizard to ask before you try and do anything.
It's written also in the tutorial
I don't take credit for some of the applications that are included in this kitchen ... like bepe's package tool , tadzio's modified mamaich tools...and of course some of the 3rd party apps.
I take the credit only for the whole thing....i busted my ass of to gather all that and make them easy to use
The moddifications :
Almoust all programs are included already. I would only have to edit some batchfiles to use other programs or other commands for same.
If you know what you are doing, you could use it yourself
For Hermes there are some neat stuff in Tools\TTools - thx to tadzio of course
We use one RUU you use another....stuff like that
One friend of mine built an Terra ROM with this...it's not that hard

anichillus said:
PLEASE NOTE THAT IT'S ORIGINALLY MADE FOR THE HTC WIZARD
I KNOW THAT IT WORKS ON OTHER TOO WITH LITTLE MODDIFICATIONS BUT I SUGGEST TO ASK ME FOR A VERSION SPECIFFICALLY.
Follow originally thread here :
The HTC Wizard side of the forum
http://forum.xda-developers.com/showthread.php?p=1287430#post1287430
Click to expand...
Click to collapse
Hermes Please

First question, tried to dump ROM and I am getting an error
Error ! There is no nk.nbf in the core/extract/source
I place the ROM NBH in that folder, originally was name RUU_signed.nbh, I tried to rename to nk.nbh, didn't matter.
I am using a hermes.
See next post waiting for the Hermes modifications.

Lurch3559 said:
Hermes Please
Click to expand...
Click to collapse
I will, give me little time to sleep lol
I will made moddifications for
HTC Herald / Terra/Wing
and I will do it for the Hermes too, but be litle patient.
You should use the "Dump nb and bin" and use the "Extra" way
The HTC Wizard uses a nk.nbf ..not a nbh. so...extract the .nb and run it thru the Dump nb and bin ... the extra option
You could extract the .nb with the little app in Tools\TTools\Tadzio\ ROMBaker.exe
You have to rename the *.nb into OS.nb and move it into Extract\ folder
It will split....but you won't be able to make it back unless you edit the
C:\Core\Tools\Batch\Create_ROM.bat according to your device....

anichillus said:
I will, give me little time to sleep lol
I will made moddifications for
HTC Herald / Terra/Wing
and I will do it for the Hermes too, but be little patient.
Click to expand...
Click to collapse
Thanks I will, I just finished working nights also, I should get some zzz's also, I was just excited when I found a tool that appears to be very user friendly.
Enjoy your rest.

Lurch3559 said:
First question, tried to dump ROM and I am getting an error
Error ! There is no nk.nbf in the core/extract/source
I place the ROM NBH in that folder, originally was name RUU_signed.nbh, I tried to rename to nk.nbh, didn't matter.
I am using a hermes.
See next post waiting for the Hermes modifications.
Click to expand...
Click to collapse
The .nbh has to be extracted by nbhextract.exe in "tools" folder. then you will recieve os.nb, splash.nb, spl.nb etc
the os.nb can be placed in "extract" folder and then dump it by using "dump .nb and .bin" from extract panel.
lol

papamopps said:
The .nbh has to be extracted by nbhextract.exe in "tools" folder. then you will recieve os.nb, splash.nb, spl.nb etc
the os.nb can be placed in "extract" folder and then dump it by using "dump .nb and .bin" from extract panel.
lol
Click to expand...
Click to collapse
Yes, correct
but he has to use the "extra" option in "Dump .nb and .bin"
his rom is different ..anyway...i will make it work for hermes too, just give me a day

Lurch3559 said:
Hermes Please
Click to expand...
Click to collapse
and Universal

My Best regards,
Thanx for release
and for pre-beta testing

so as of now, this will or will not work for the Wing? my device isn't CID Unlocked but i'd love to donate back to this site by creating a rom especially since this seems very easy with your kitchen. i don't wanna mess up anything so please let me know if this version works with the wing also or if its one of the new ones your making soon, thank you

blackout203 said:
so as of now, this will or will not work for the Wing? my device isn't CID Unlocked but i'd love to donate back to this site by creating a rom especially since this seems very easy with your kitchen. i don't wanna mess up anything so please let me know if this version works with the wing also or if its one of the new ones your making soon, thank you
Click to expand...
Click to collapse
I cooked a terra rom with this - by using the wingdump imgf_raw.bin and the xip from terra rom. you dump the rum by using "dump .nb and .bin"
The only mistake i did - was editing the .hv files BUT i forgot to convert the boot.rgu back and that bricked my device.
But you can cook a rom. YOu only have to use PKT "manually". That´s all. Just follow the steps from the kitchen.
I cooked for example a terra rom without transcriber, autoupdate und included batterystatus and totalcommander - no problems with this, when using Aserg upgrade_rom.bat for falshing.
BTW - do you have an official WWE ROm for flashing - if something goes wrong? OK - it will be WM5 then but you can flash?
good luck.

papamopps said:
I cooked a terra rom with this - by using the wingdump imgf_raw.bin and the xip from terra rom. you dump the rum by using "dump .nb and .bin"
The only mistake i did - was editing the .hv files BUT i forgot to convert the boot.rgu back and that bricked my device.
But you can cook a rom. YOu only have to use PKT "manually". That´s all. Just follow the steps from the kitchen.
I cooked for example a terra rom without transcriber, autoupdate und included batterystatus and totalcommander - no problems with this, when using Aserg upgrade_rom.bat for falshing.
BTW - do you have an official WWE ROm for flashing - if something goes wrong? OK - it will be WM5 then but you can flash?
good luck.
Click to expand...
Click to collapse
I wouldn't test it on my phone because I don't have it CID Unlocked and couldn't risk it getting bricked as Tmobile hasn't released the official rom for download yet but i'll see what I can do as into building a rom. If you get a free chance this week, wanna walk me through it?

Glad to see you are providing my tiny initflashfiles generator. You added a great functionnality with the automated cab extraction. Well done !

So if I understand this correctly, if someone posted their dump from the Wing I could proceed to cook and flash to my unbranded P4350 using Aserg's method without the possibility of bricking since i have the official HTC WWE that I can re-flash?

xander803 said:
So if I understand this correctly, if someone posted their dump from the Wing I could proceed to cook and flash to my unbranded P4350 using Aserg's method without the possibility of bricking since i have the official HTC WWE that I can re-flash?
Click to expand...
Click to collapse
For the wing dump you need the XIP from terra dump - but you find it in the Wing-dump thread from Herald forum.
And yes - you can cook - if you have an official rom. SO no worry to brick - you can go back to WM5. lol
Have a try. BUT you must use the "manual" way from PKT. Just follow all teh steps from kitchen. And use the "Dump .nb and .bin" from extract panel.

papamopps said:
For the wing dump you need the XIP from terra dump - but you find it in the Wing-dump thread from Herald forum.
And yes - you can cook - if you have an official rom. SO no worry to brick - you can go back to WM5. lol
Have a try. BUT you must use the "manual" way from PKT. Just follow all teh steps from kitchen. And use the "Dump .nb and .bin" from extract panel.
Click to expand...
Click to collapse
I'm about to try cooking one up today, I read the tutorial and it doesn't look too bad. If I can find the tmobile wing wm6 rom, i'll base it off that otherwise imma have to use a wm5 rom. I'll let you guys know how it goes.

blackout203 said:
I'm about to try cooking one up today, I read the tutorial and it doesn't look too bad. If I can find the tmobile wing wm6 rom, i'll base it off that otherwise imma have to use a wm5 rom. I'll let you guys know how it goes.
Click to expand...
Click to collapse
I will give this a shot as well. I believe you can find the wing OS and XIP in the Herald mobile 6 forum.

Related

[REF] Cooking Class Class of 2007/08/09 [ONLINE]

This thread is going to be for Junior chefs and other cooking enthousiasts.
Any one can join in and contribute and share mistakes made.
Touch only Please.
Most other devices are pretty well covered.
But Touch Forum is one of the youngest and a lot of touch users are new to WM6 and flashing and i find a lot of threads started that would belong pretty well in this thread. Not every Touch User goes onto other threads to find the information he needs
And no please don't consider me as the main man. There's still enough i need to learn and mistakes i still need to make
(And experiments i still need to do)
Graduates and Teachers:
SwiftBlade, Teacher
Xtriny, Chef in Sabatical
Koala996, Chef Avec Le Francois
Bram Smulders, Graduate before even starting
ayyu3m, Cook and instant Teacher
Ameet, Chef and XIP Port Teacher
Hyper Core kitchen
Below is a slighty edited version from the original thread,
just to get you started.
As the original is still beta (but a mighty fine beta at that) any issues found will be reported on original thread. Please try to keep request in this thread as much as possible. And let's not bother Anichillus to much with questions and try to find out as much as possible our selves.
~~~~~~~~~~~~~~~~~~~~~~~~
HyperCore
Touch BETA
HyperCore Was Assembled and put together By Anichillus.
Who's added a nice Extract and Cook Tutorial in the Help Folder.
Many of the tools were created by those in Special thanks part below.
​
The most complex KITCHEN a begginer cook may ever need.
Easy to use but also very complex, it can be usefull to anyone.
Why ask and wait for others to make the perfect ROM for you when you got the power to do it yourself ?
~. Base ROM .~​* NO BASE ROM ! but ANY ROM !
~. Best part .~​* IT USES TADZIO TOOLS
* YOU CAN OPTIMISE EXE's and DLL's, SO IF YOU WANT EVEN MORE SPACE, YOU'LL GET IT
* IT CAN BE USED ON ANY DEVICE WITH VERY LITTLE MODIFICATIONS !!!!!
* NO LONGER LIMITED BY ANYONE OR ANYTHING.
* YOU CAN COOK ANY ROM YOU LAY YOUR EYES ON VERY EASY
* IT HAS ADVANCED ERROR CHECK
~. Guides .~​* Hermes Cookbook - THANKS to sambartle
* My Way of cooking - THANKS to Anichillus
* How to ADD/REMOVE programs -THANKS to mfrazzz
~. Notes .~​Since this is still a public BETA, I await your problems/ideas/concepts.
If you spot a bug, i suggest discussing it first before posting it to official HyperCore Kitchen Thread.
I suggest having a ROM to make a backup in case you do something wrong
This kitchen was created and tested for WindowsMobile 6 , but WM5 should work OK too.
~. Download .~
RapidShare
Special thanks for those that made the Kitchen Possible :
* Anichillus - for creating the most complete Kitchen around and letting me start this thread
* Papamopps - for support on HyperCore Kitchen
* nandlal_mk - DSM editor
* mfrazzz - for his
* mUn - for finding the time to answer some of my questions
* molski - for i started working on his tools and still used some of them
* Tadzio - for his tools and patience
* bepe - for his tools
* the-equinoxe - for his splash-screen tools
* naboleo - for his initflashfiles generator
* dutty - for his NBH Tool
* Faria - Because i liked his way of cooking and he created one of the first kitchens i ever tried out.
Names will be added. I'm a very strong believer in showing apreciation to the hard work of XDA contributors.
Rules
1. Be clear on what your specs are. So use your signature so you don't need to post your Base Rom and such.
2. Keep it clean. Ignore useless posts that have nothing to do with the thread. Because it will just become a very long book with no substance.
3. Read the thread before asking. And again ignore Questions you know are allready in the thread.
Tutorials
1. Installing Hyper Core Kitchen For Elf (Re-Edit By ayyu3m)
2. Making DumpRom of Original Stock Rom. (By r0p3)
(haven't done this unfortunatly for my device so i won't be able to do it fully, so if anyone has a full explanation that also extracts, SPL/IPL/Radio/Ext_Rom please post it, unless i'm missinformed and the Wiki covers this)
(for more about this and updates check this thread by r0p3 Wiki entry: Backup your Elf ROM - dump and restore)
3. Extract Rom and XIP. (Amazing Pictorial By ayyu3m)
4. Cooking your First Plain Unedited Rom (Pictorial By ayyu3m)
5. How To Manually Make your own OEM Package from a .cab
6. Adding an OEM Package.
7. Removing Files from the ROM.
8. Edditing default.hv and user.hv (more like cleaning up, as direct editing is not advised)
9. Editing and making Fake Ext Rom.
10. Finding Specific Registry Settings To Cook.
11 A. How to Change PagePool In Rom Before Flashing (For Pre 2.20 ELF's) (By Noonski)
11 B. How to Change PagePool In Rom Before Flashing (For After 2.20 ELF/IN's) (By SwiftBlade)
12. Replace Graphics in Exe Files and DLL's (Tute 14 also has info on this)
13. Export the XIP from another Device Rom To Work With ELF/IN or Porting XIP manually (By Ababrekar)
14. Editing MUI files in a Nutshell
X. Changing Precooked Tabs Settings
X. How to find specific registry settings
If any one has any extra Tutorials or wants to Change/perfect Tutorials allready made, please do, it's an open Kitchen.
EOM repository
1) Packages may only consist of free software or software embedded in a factory ROM.
2) Package(s) must work and have been used by the poster in cooking a ROM. Please state the kitchen you used.
3) Uploads must be named according to contents (i.e. 300_Compressed_Office_2007_MM.zip). (MM=Main Memory SD=Storage Card)
4) You must state the contents of the package in your post. Not every little thing but enough for a person to make an informed decision to use the package or not. Packages do not have to include an option.xml file. However, they must include an initfileflashes.dat as well as .rgu and .dsm files.
5) If your package is too big, please use the uploads "/Elf/Cooking Class/OEM Packages" section of the FTP to post and post the link.
If you are posting a request:
1) Click on the paperclip icon on the main forum page next to this thread to see if a package you are requesting has already been posted. This is the most important rule!
I have a naming Scheme for most of my packages to easily find stuff back and have some order in my kitchen.
000 Personal Settings For Rom.
100 Interface Cutimisation Packages.
200 Home Screen Plug Ins
300 Applications
700 SIP Input Methods
800 Registry Tweaks
900 OS packages (Auto Update, Enterprise, etc)
Of course this is open for discussion. But for now try to keep numbering for Packages.
I'll contact a Moderator to see if it's okay to use some FTP space on XDA.
No Warez, No Warez and..... No Warez. Only Free Apps with permission from creator and Original Software found in Stock Rom's can be added to the repository.
REPOSITORY​000_Fake Extended Rom MM (by Noonski)
000_Launch Extended Rom Install MM (by Noonski)(For those that like to clean out their kitchen )
100_Different_Syncing_Animation_MM
100_NewBatteryIcons_MM
300_Adobe Reader LE MM
300_HTC_Audio_Manager_Blue_MM
300_HTC Duo Touch EndKey App WWE MM (By Noonski & koala996)
300_HTC_Random_Acces_MM
300_GoogleMaps MM (By Noonski)
300_Pocket Rar MM
300_psShutXP Power Off Replacement MM
300_Redial MM (By Faria)
300_VOIP_MM
700_HTC Duo Touch KeyBoard WWE (By Noonski & Special TNX To Tom_Codon & Special TNX to "A Good friend Of XDA-Developers.Com")
900_Windows Live Messenger 1.6.32 WWE_MM (By boy_de_ghet)
I'll think of
I'll think of of a better way of filling in these first threads. But it's better to be safe then have not enough space so please be fiorgifefull for now.
Localizing
Let's try and get some information together about working with localized Roms here.
I've seen a Spanish, French, Chinese and Dutch Cooks around.
Base Roms
Dopod Asia WWE 1.17
(DO NOT DOWNLOAD AND FLASH THE ROM BENEATH LINK IS FOR RESEARCH PURPOSES IT IS A FULL ROM WITHOUT SPL EXTRACTED)
Uploading RUU_signed_OS5.2.1437.zip
Feck Registration
Either your in or your not.
Let's not but any pressure on people then.
Any good suggestions to fill the first threads?
Registration
Xtriny ;-)
Hi Noonski,
I'm in
Hi Noon,
I'm in to!
Nice Initiative of you man, maybe we can sticky this thread!
It's helpfull to us all!
Mayb Post all the current available roms also, becouse everybody can extract them to build their own??
Gr. Bram
Yeah i set up Thread 9 to collect those in.
When it becomes intersting it will propably become sticky.
Great to see you guys. I'm of to do real work.
Pick me, Pick mee, register mee?
Hi Noonski,
Thanks for the thread. I'm in and I hope this thread will be kept clean.
Ive been trying to cook my own stuff for a while now, but only partial succes. Ill be following this thread
Nice initiative
Nice to see we got's us a good sense of Humour here.
I'm in and ready to cook!!!
Damn
Here's what i just did.
I edited a Registry setting using PHM reg edit.
It was the setting that tells what to run in the HTC home Pug in.
Will have to look at home but i think this registry setting is also present in a provxml file when cooking. After reset it froze on third Boot.
Going to try and reproduce this step now.
Not cooking issue but still important and interesting i thinks
It was HKLM\Software\HTC\HTCHome\Launcher\5\Path=
**** i could not reproduce it.
Second attempt, again it did not freeze.
So it looks freeze can still happen with new HTC home. I could try and replace the files with original DUO Touch dll and exe files that have 6 tab standard.
Maybe i need to restart faster after reg edit.
Hey Noonski count me in.
Vista fix is working, and to save time to other people i uploaded edited batch folder(link in my sig).
Could we add Touch configuration to the Kitchen and include RUU too, coz Artemis RUU doesn't work.

Kaiser ROM Kitchen Tutorial

After PMing jcespi2005 for his approval, I've taken the time to write up this beginner ROM cooking tutorial. Please reply with your comments or questions about it in this thread.
Enjoy.
Kaiser ROM Kitchen Tutorial​
Here are some user testimonials:
tkalli said:
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today. It was a great learning experience. I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more. I have both a Tilt and a Kaiser. Looking forward to more learning.
Click to expand...
Click to collapse
gregross said:
...Alex, thanks for the tutorial and components in a nice tidy package - actually got me to jump into cooking for the first time...
Click to expand...
Click to collapse
stozmon said:
_Alex_ and jcespi2005,
Thank you both SO VERY MUCH for all of your time and contributions.
I've been hesitant thus far to cook my own ROM but with the noob friendly screenshots added to the wiki, I finally had the courage to cook up my own ROM, flash it and what do you know...it WORKED!
Being a professional chef, I am now inspired to work towards virtual chefdom in the ROM realm.
Thanks again!
Click to expand...
Click to collapse
ecltech said:
Great job ... couldn't be easier!
Click to expand...
Click to collapse
Do all these tools function rightly in windows Vista ?
What is int he package Cingular Pre-Midlets 9020? Sounds like it could either be important or junk
cooked rom
hello alex
sorry about my english
i want ask you about recook cooked rom like dutty's rom
i know that in need to instell the rom in my device and after that i need to dump the rom/
ok i know to do that without any error, i need allso take the part01.raw and part02.raw and puy them with ruu_signed (the cooked one "dutty's") in one folder
when i start cooking that rom i allways get the same result about 2 dsm file that the accses is denaid
what can i do to fix that problem, what did i go wrong
jast to tell you that is no problem whie shipped rom, buy with cooked i dont know what to do
thanks for your help
doron
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today.
It was a great learning experience.
I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more.
I have both a Tilt and a Kaiser.
Looking forward to more learning.
So just to check I under stand this..
I went thorugh the the install instructions OK but the bit that confused me was...
Extract the OEM Package folder included within the ROM thread to \kaiserkitchen\packages
I assume you have to manually create a sub-folder called packages under
\kaiserkitchen\ ??
But then what is the use of the OEM_HTCxxx folder?? What if anything goes in there??
So then, if I unzip all the OEM cab files into the \kaiserkitch\packages folder (OR any other OEM packages I can find , especially HTC packages) then when Ervius runs - I should see all the packages I copied to the \kaiserkitch\packages folder???
Many Thanks for your tutorials - it's really nice to see people sharing their knowledge!!
Cheers
John
dcdivenut said:
What is int he package Cingular Pre-Midlets 9020? Sounds like it could either be important or junk
Click to expand...
Click to collapse
Cingular Pre-Midlets is all the java games that came with the phone. It's mostly junk...
mordof said:
hello alex
i want ask you about recook cooked rom like dutty's rom
i know that in need to instell the rom in my device and after that i need to dump the rom/
Click to expand...
Click to collapse
Not really good at reconstructing ROMs, but the errors you're receiving about duplicate DSMs, you'll need to find the duplicate folder and/or file and delete it.
You might be able to get more help in the reconstructing ROMs thread stickied at the top of the forums.
Hope this helps.
panosha said:
Do all these tools function rightly in windows Vista ?
Click to expand...
Click to collapse
From other threads, I've heard that extract will not work in Vista. I can't say about cook or flash until I get a chance to test it.
Hope this helps...
odyseus said:
So just to check I under stand this..
I went thorugh the the install instructions OK but the bit that confused me was...
Extract the OEM Package folder included within the ROM thread to \kaiserkitchen\packages
Click to expand...
Click to collapse
It seems like you haven't downloaded the OEM packages yet. It should be alot clearer with the files in front of you. Download them first and see if that helps...
tkalli said:
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today.
It was a great learning experience.
I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more.
I have both a Tilt and a Kaiser.
Looking forward to more learning.
Click to expand...
Click to collapse
Glad to see that I'm helping others cook
_Alex_ said:
It seems like you haven't downloaded the OEM packages yet. It should be alot clearer with the files in front of you. Download them first and see if that helps...
Click to expand...
Click to collapse
Hi Alex,
My mistake I though I had got these files..
Just one more question. I have deconstructed Dutty's latest ROM. There are a few 'OEM' packages in the SYS folder that I would like to add to your base ROM one being a folder called HTC Touchflo Cube.
I have set up another kitchen folder with your Alex base ROM, now where would I put the additional Dutty extracted folders eg HTC Touchflo Cube folder?
Do I simply add the additional Dutty extracted OEM packages to the SYS (Alex) folder? or do I add it under (Alex) packages??
Many Thanks for your patience
John
odyseus said:
Hi Alex,
My mistake I though I had got these files..
Just one more question. I have deconstructed Dutty's latest ROM. There are a few 'OEM' packages in the SYS folder that I would like to add to your base ROM one being a folder called HTC Touchflo Cube.
I have set up another kitchen folder with your Alex base ROM, now where would I put the additional Dutty extracted folders eg HTC Touchflo Cube folder?
Do I simply add the additional Dutty extracted OEM packages to the SYS (Alex) folder? or do I add it under (Alex) packages??
Many Thanks for your patience
John
Click to expand...
Click to collapse
Extracting OEM packages from other people's cooked ROMs isn't that easy which is why it's not covered in this tutorial. I also don't like doing it because it's somewhat stealing...
You may have better luck following my steps in my OEM Package Tutorial, and convert the htc touch cube cabs to OEM packages.
Here are some links for HTC touch cube cabs:
http://forum.xda-developers.com/showthread.php?t=348437 and http://forum.xda-developers.com/showthread.php?t=343583
Hi Alex - I didn't think of that, I didn't realise that the ROM author had made their own OEM packages..
Anyway, in that case, I will have a go at generating a OEM package for coreplayer, I assume that I will add this package in the kaiserkitchen\packages folder? (Not SYS etc..)
Cheers
John
_Alex_ said:
Glad to see that I'm helping others cook
Click to expand...
Click to collapse
Next I am going to try and cook one with the dotnet 3.5.
Be traveling next ten days, so may not get to it right away...
sorry doppel-post
Hi Alex thx for this TUT... i´m testing...
First: Sorry for my bad english
This is the first time for me to cooking roms.
i use the HTC German recunstructed ROM as Base-Rom...
after klicking the GO Button, i have many line´s of:
package "XXXXXXX" does not contain .rgu file "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.rgu"
not all, but a few... is this normal??
EDIT On:
All is great... my first GER cooked ROM run I´m so happy
and now i musst learn how i create/delete (GERman) OEM Pakages, to create a good German ROM...
@ ALex
very big thx!!!
Edit OFF:
Martie said:
package "XXXXXXX" does not contain .rgu file "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.rgu"
not all, but a few... is this normal??
Click to expand...
Click to collapse
Yes, not all packages contain rgu or registry entries. No worries there.
odyseus said:
Anyway, in that case, I will have a go at generating a OEM package for coreplayer, I assume that I will add this package in the kaiserkitchen\packages folder? (Not SYS etc..)
Cheers
John
Click to expand...
Click to collapse
Yup, it all goes in packages.
FWIW, The Core Player Media Player (TCPMP) exists as a OEM package for the freeware version and can be found as 'Pocket Media Player' within the OEM packages included within the Kaiser ROM Kitchen by jcespi2005.
_Alex_ said:
From other threads, I've heard that extract will not work in Vista. I can't say about cook or flash until I get a chance to test it.
Hope this helps...
Click to expand...
Click to collapse
Cooking works great in Vista. Thank you.

TNT.Kitchen based on Kaiser_Kitchen by _Alex_ (All my OEM's)

Hi,
at the begin, i want to give all credits to _Alex_ for his kitchen and i want to tell you all that "This kitchen is _Alex_ kitchen with integrating All packages to one by bepe"
if you are beginner, just visit this
if you tried kaiser kitchen before, just read the edit directly and download.
What i did:
- Fully supports all_packages_to_one.exe by bepe (which give the ability to combine all dsm files into one dsm file, so Windows directory contains just one dsm file).
- All packages arranged to be easily updaeted.
- Useful registries included.
- SYS and ROM based on 19202 by nothrills.
i hope you will find something in this small thing .
you can download it from: http://rapidshare.com/files/108164052/TNT.19202_Full_Kitchen.rar
The kitchen is missing Rom Folder, Download it from the link: http://rapidshare.com/files/114997569/19202_Kaiser_Rom_folder_for_TNT.kitchen.rar
Credits:
_Alex_ for his kitchen.
Bepe for his all_packages_to_one tool (and ofcourse for every thing he did in the forums).
Nothirills for the base rom.
Thanks for sharing !
Does it include XIP porting too ?
MickyMax said:
Thanks for sharing !
Does it include XIP porting too ?
Click to expand...
Click to collapse
Kaiser still needs manually xip porting, as bepe reported that his tools can't work in kaiser and polaris.
while kaiser always has the latest builds which come already ported, all you need is to extract XIP, ROM and SYS folders and then use the same OEM you want (ofcourse you need relocate modules tool which is in development forum)
in general, you need to have a look into OEM folders in this kitchen to rearrange any new release as the arrangment in this kitchen, so it is easier.
good luck.
Where is the ROM?
its right said:
. . . - SYS and ROM based on 19202 by nothrills. . .
Click to expand...
Click to collapse
I am not finding the ROM in the download - there is no os.nb that I can find
cushcalc said:
I am not finding the ROM in the download - there is no os.nb that I can find
Click to expand...
Click to collapse
i did that 3 weeks ago, i forgot what is included exactly, but someone I gave him the kitchen at that time, and he created his own.
ROM folder doesn't there !!!
Goooooooooood
Hi,
Many Full Thanks for this share.
Could you please make a little guide "How Add Modules" into SYS folder as you do for your Wizard Kitchen ?
Thanks anyway
Moo
Hello all
Its Right.
Does the OEM Packages provided contain the Packages you use to cook your ROMs?
I love the work you and your team do.
God bless you all.
MooCan said:
Hi,
Many Full Thanks for this share.
Could you please make a little guide "How Add Modules" into SYS folder as you do for your Wizard Kitchen ?
Thanks anyway
Moo
Click to expand...
Click to collapse
sorry, but all the tools used for porting are not compatible with Kaiser and Polaris.
Blueangel69 said:
Its Right.
Does the OEM Packages provided contain the Packages you use to cook your ROMs?
I love the work you and your team do.
God bless you all.
Click to expand...
Click to collapse
Yes, all the packages without exceptions . it is TNT.19202 professional kitchen) .
noob
its right said:
sorry, but all the tools used for porting are not compatible with Kaiser and Polaris.
Click to expand...
Click to collapse
Hi,
I'm starting cooking and learning.
I have read and search but this step is really not clear in my head
So excuse me in advance for this question.
So I would like to add some modules (made with resersmode) in an Original OEM Kaiser Rom (eg the NoThrills WM 6.1 WWE) that has been extracted into OEM and SYS folder and XIP using the Kitchen and then rebuild and flash.
- does I need to port something or modify the XIP as this is an original Kaiser XIP ?
- does I need to only copy my new modules to the SYS folder and reallocate all modules using G'Reloc ?
- does is it needed to make something particular with the original XIP (reallocating, ...) when adding modules ?
Thanks in advance.
Moo
MooCan said:
Hi,
I'm starting cooking and learning.
I have read and search but this step is really not clear in my head
So excuse me in advance for this question.
So I would like to add some modules (made with resersmode) in an Original OEM Kaiser Rom (eg the NoThrills WM 6.1 WWE) that has been extracted into OEM and SYS folder and XIP using the Kitchen and then rebuild and flash.
- does I need to port something or modify the XIP as this is an original Kaiser XIP ?
- does I need to only copy my new modules to the SYS folder and reallocate all modules using G'Reloc ?
- does is it needed to make something particular with the original XIP (reallocating, ...) when adding modules ?
Thanks in advance.
Moo
Click to expand...
Click to collapse
for kaiser, you have to learn how to port XIP manually.
but if there is a ready kitchen (as linked here) you don't need to do anything, just add and remove the packages in OEM folder.
in case of adding other modules in OEMDrivers, you need to use GReloc which is in development forum and read the comments mentioned there.
I hope that i gave you some of useful informations.
good luck
its right said:
for kaiser, you have to learn how to port XIP manually.
Click to expand...
Click to collapse
Can you make a good tutorial for this please ?
MickyMax said:
Can you make a good tutorial for this please ?
Click to expand...
Click to collapse
there are many of great threads in the forum, check this http://forum.xda-developers.com/showthread.php?t=379598
Thanks man. I have been really thinking about jumping in to the kitchen myself. This is just a push for me. Now to find the time.
P1Tater said:
Thanks man. I have been really thinking about jumping in to the kitchen myself. This is just a push for me. Now to find the time.
Click to expand...
Click to collapse
good luck, I'm sure we will see your touches soon .
please give us the ROM folder. Thanks
The ROM folder is uploaded
The 1st try with this kitchen worked perfectly. I cooked a rom that supports Chinese R/W, adding a lot more OEM packages. The ROM is fast and almost flawless, thanks.
Got the rom folder and did g'relocate and cooked the rom and flashed it, got to the second splash screen and the touch screen froze on "tap to set up your device". However, activesync connected to the phone and i was able to flash a known rom to recover. Any idea what i did wrong? I made no changes to OEM or anything else. Could it have something to do with the touch.dll or such, or maybe i got the slot addresses wrong?
P1Tater said:
Thanks man. I have been really thinking about jumping in to the kitchen myself. This is just a push for me. Now to find the time.
Click to expand...
Click to collapse
Same sentiment here...just to find the time now....

Raphael (HTC TouchPro) extracted OEM and SYS

Here are RAR files containing the complete extracted OEM and SYS packages for the Raphael (HTC TouchPro). I'm posting them both because I had some problems downloading the ROM myself, and because others may wish to take some of the packages and turn them into CABs for the Universal.
These have been extracted from the HTC Stock WWE 1.66.405.1 ROM that tupisdin posted over in the Raphael ROM section, here:
http://forum.xda-developers.com/showthread.php?t=410305
Please note - these packages are *exactly* as extracted from the Raphael ROM, and HAVE NOT been relocated using M'Reloc or G'Reloc for use in a Universal ROM.
These can be used with pretty much any Universal ROM Kitchen, but be warned that you will need to 'Reloc the modules.
In case anyone is interested, I will be using these packages as the basis of my next personal ROM. Hopefully this time it'll make it to a general public release!
OEM - http://rapidshare.com/files/134737916/HTC_Raphael_1_66_405_1_OEM.rar
SYS - http://rapidshare.com/files/134744406/HTC_Raphael_1_66_405_1_SYS.rar
Enjoy - but hey, let's be careful out there.
[Edit: I've also extracted OEM/SYS from the ATT/Cingular Raphael ROM, and can upload those to Rapidshare if anybody is interested]
PJC
Mirrors (direct downloads):
OEM - http://pockethacks.com/raphael/HTC_Raphael_1_66_405_1_OEM.rar
SYS - http://pockethacks.com/raphael/HTC_Raphael_1_66_405_1_SYS.rar
nJoy
pjc007 said:
In case anyone is interested, I will be using these packages as the basis of my next personal ROM. Hopefully this time it'll make it to a general public release!
Click to expand...
Click to collapse
Oh yes - I'm interested.

Happy cooking:visual kitchen for elf(in)

Finally with the great effort by miky6682: Realy thankfull by heart now we have visual kitchen for elf(in)
enjoy it,cook it,eat it....
If any query then ask the master...miky6682
atleast plz someone comment.
run your old kitchen as an administrator and it should be oke
Hi to make things work disable user account control and restart your laptop and every thing should work fine
sasa66 said:
Hi to make things work disable user account control and restart your laptop and every thing should work fine
Click to expand...
Click to collapse
hey bro can u plz checkout sticky for hhbrid kitchen.there i had a probl
nd if u can plz give me guidance to update ipl.i had hspl 3.10 but the discription for ipl in the thread is bit confusing for me.coz i dont understand where to put the ipl 3.10 nb file?
i have figure it out but can someone tell me y cant i make bootable rom
saurabh88 said:
i have figure it out but can someone tell me y cant i make bootable rom
Click to expand...
Click to collapse
Did you read this thread , please read it carefully, i did it myseft went i start cooking, i really mean it, i read it all the way and learn a lot
i use both the kitchen bepe and hybrid.in bepe's kitchen i unable to make bootable rom.and in hybrid kitchen i am still not able to make a rom.it give some kind of dsm error.
No offense meant and in no way or intention of insulting your intelligence but, have you scan the thread that honcorrd gave 2 posts up? You will find there a working WM6.5 kitchen from trueg together with lots of precious advice on how to start cooking.
If I as a newbie and a wannabe cook may be allowed to give you an advice:
Learn first how to recover from a bricked device. Just in case you mess up cooking
Read, read, read specifically on kitchen threads & cooking. Learn the language of chefs: XIP, SYS, EXT, PRB, OEMXIPKernel, etc.
Check out the Development & Hacking thread and search for kitchen topics specifically for QVGA devices. There are lots of them available
Start cooking a WM6.1 ROM, play with it. You'll learn a lot & faster by trying out things yourself.
It will also be helpful to checkout [PICTORIAL] COOKING YOUR 6.1 ROMS USING ELF(in) HYBRID KITCHEN (kokotas) [ONLINE] by ayyu3m.
I see that you have a Gene as well, If I'm not mistaken I think BesFen has a good thread there about cooking.
Good luck!
daeinnor said:
No offense meant and in no way or intention of insulting your intelligence but, have you scan the thread that honcorrd gave 2 posts up? You will find there a working WM6.5 kitchen from trueg together with lots of precious advice on how to start cooking.
If I as a newbie and a wannabe cook may be allowed to give you an advice:
Learn first how to recover from a bricked device. Just in case you mess up cooking
Read, read, read specifically on kitchen threads & cooking. Learn the language of chefs: XIP, SYS, EXT, PRB, OEMXIPKernel, etc.
Check out the Development & Hacking thread and search for kitchen topics specifically for QVGA devices. There are lots of them available
Start cooking a WM6.1 ROM, play with it. You'll learn a lot & faster by trying out things yourself.
It will also be helpful to checkout [PICTORIAL] COOKING YOUR 6.1 ROMS USING ELF(in) HYBRID KITCHEN (kokotas) [ONLINE] by ayyu3m.
I see that you have a Gene as well, If I'm not mistaken I think BesFen has a good thread there about cooking.
Good luck!
Click to expand...
Click to collapse
yes as u said i had treidd ti make rom using by ayyu3m.but there were a dsm file error.
and about gene i had already uploaded 3 rom for new gene including 6.5.
and i had never found visual kitchen so much easy userface...
I don't know if other chefs have succeeded in using Ervius Visual Kitchen (EVK) to build Elf(in) ROMs. The only visual kitchen we have is as you mentioned - kokotas' Hybrid kitchen.
It works fine even on WM6.5.x but, the process to build ROM using this kitchen is tedious and the built ROM is buggy compared to the non visual B2 & trueg (both kokotas based) kitchens. Why not use those instead at the moment? Both works perfectly alright and quite easy to use.
daeinnor said:
I don't know if other chefs have succeeded in using Ervius Visual Kitchen (EVK) to build Elf(in) ROMs. The only visual kitchen we have is as you mentioned - kokotas' Hybrid kitchen.
It works fine even on WM6.5.x but, the process to build ROM using this kitchen is tedious and the built ROM is buggy compared to the non visual B2 & trueg (both kokotas based) kitchens. Why not use those instead at the moment? Both works perfectly alright and quite easy to use.
Click to expand...
Click to collapse
my friend i tried all the kitchen bepe,kokatos,hypercore...but only few success.
with VK i can not make bootable rom.and with bepes kitchen can make bootable rom but it stuck at wm 6.1 screen.and with kokatos it says some dsm procblem which due to lack of time i cannot able to read.and finally with hypercore kitchen when i want to dump it says error no such file is found...i have read all the help thread but nothing workd for me...
so may be after my final MBBS exam i can able to short out this....
daeinnor said:
I don't know if other chefs have succeeded in using Ervius Visual Kitchen (EVK) to build Elf(in) ROMs. The only visual kitchen we have is as you mentioned - kokotas' Hybrid kitchen.
It works fine even on WM6.5.x but, the process to build ROM using this kitchen is tedious and the built ROM is buggy compared to the non visual B2 & trueg (both kokotas based) kitchens. Why not use those instead at the moment? Both works perfectly alright and quite easy to use.
Click to expand...
Click to collapse
After some troubles. I had succes in cooking rom with visual kitchen.
so plz help me brother...i really need it man...
so plz help me brother...i really need it man...
miky6682 said:
After some troubles. I had succes in cooking rom with visual kitchen.
Click to expand...
Click to collapse
Congratulations! That's great to know miky. I'm still trying to make EVK (v 1.8.x) built ROM bootable but has no luck yet. I wish you can share your secret!
I have requested help from other notable xda chefs to include Elf(in) in their VK's and I had some positive response. We will surely have a new EVK based kitchen soon!
saurabh88 said:
so plz help me brother...i really need it man...
Click to expand...
Click to collapse
For a newbie like me best thing to do is:
Follow ayyu3ms pictorial kitchen
Dump an original Elf(in) ROM, not a cooked one. Links are on the original ROM thread
Cook the dumped ROM. It should work
Start replacing the files with the new - target ROM.
Read trueg's post on the kitchen linked by me and honcorrd . I learned a lot from those
Ace your MBBS, no point in learning building ROMs if you don't pass it!
daeinnor said:
Congratulations! That's great to know miky. I'm still trying to make EVK (v 1.8.x) built ROM bootable but has no luck yet. I wish you can share your secret!
I have requested help from other notable xda chefs to include Elf(in) in their VK's and I had some positive response. We will surely have a new EVK based kitchen soon!
Click to expand...
Click to collapse
It's not a secret. I edited some files and it's work. I can share visual kitchen for elf and elfin.
miky6682 said:
It's not a secret. I edited some files and it's work. I can share visual kitchen for elf and elfin.
Click to expand...
Click to collapse
plz be hurry.love to see that...
here is visual kitchen for elf and elfin
http://www.megaupload.com/?d=XYJLP2QN
look forum forum for oemdrivers and others needed files
overwrite bat files with this sticked in this post
http://forum.xda-developers.com/showpost.php?p=5103905&postcount=817
or extract this rom with winrar and dump ruu_signed.nbh
http://rapidshare.com/files/1584103..._3.07.720.03_4.1.13.71_03.34.90_BLUE_Ship.exe

Categories

Resources