HOW to Upgrade to Windows Mobile 6 - 8125, K-JAM, P4300, MDA Vario ROM Development

i tried it all day, still windows mobile 5
Rom is 2.21.4.1 WWE
external rom is 2.21.4.101
IPL is 2.21
SPL is 2.21
i tried so many ways to upgrade, can folllowed the step by step tutorials, still can't figure it out
anyways know,s please let me know
thanks

First off, is your Wizard CIDunlocked? Not SIMunlocked.. CIDunlocked... you can NOT flash a custom ROM if your phone hasn't been unlocked.
If not... follow READ READ READ and follow EVERY SINGLE STEP HERE, and DO NOT SKIP ANY STEPS or you WILL brick your device.

how do i know if it's CID unlocked ?, i don't think it is

If you don't know if it is, then chances are it ISNT.. And you are probably dangerously close to killing ur phone.
if your phone is NOT CIDunlocked you CAN NOT upgrade it. Follow the thread I put in my previous post.. follow EVERY STEP.. READ everything... and make sure you understand what you are doing, or else you will end up with a very expensive knick knack.

this link doesn't work
ftp://xda:[email protected]_Novii+CF2.rar

Well, you can always pay 40 dollars to www.imei-check.com to unlock your phone.. you dont have to send it them, they will give you the tool to unlock it... just follow the directions.

so there's nothing i can do right now, cause ftp://xda:[email protected]_Novii+CF2.rar doesn't work
right ?, i don't want to pay $40, just rather do it myself

i tried this http://forum.xda-developers.com/showthread.php?t=271043
but some of the steps i don't understand

ucsmfu said:
i tried this http://forum.xda-developers.com/showthread.php?t=271043
but some of the steps i don't understand
Click to expand...
Click to collapse
If you don't understand the steps, then don't try to flash your phone.

Im with Keg on that one, if you dont understand it, then dont try to update. Wait for your carrier to release an official WM6 rom.. I know cingular plans on releasing a few in July
I didnt understand at first either, so I just paid the 40 bucks.. the 40 dollars was well worth it... rather pay 40 dollars then 300+ for a new phone.

research shelltool. I flashed my G4 2.250001 IPL/SPL with it when it was locked, and it worked fine. I don't remember if 2.21 is okay to use this method, but you need to check it out.
I had to unlock when formatting failed...
Check wizard upgrading, I believe there's a post there.
Good luck.

Thread locked. This has been covered a thousand times in the Wizard upgrading forum and in the wiki. Please read and don't flash before you know what you are doing.

Related

NOOB need help with mUn_aRTM_10.2.0.8_WWE

HI, i download this rom RUU_mUn_aRTM_10_2_0_8_WWE and clicked the .exe and everything seemed to be going good but wen it was done nothing had changed it was exaxctly the same.Any one no wat i did wrong?
ps i bought my 8125 from someguy and its unlocked and says some numbers wen u first boot it up.Dont know if that helps
ipl 1.00
spl 1.00
gsm 01.09.11
os 1.8.11.1
Foxygrandpa22 said:
HI, i download this rom RUU_mUn_aRTM_10_2_0_8_WWE and clicked the .exe and everything seemed to be going good but wen it was done nothing had changed it was exaxctly the same.Any one no wat i did wrong?
ps i bought my 8125 from someguy and its unlocked and says some numbers wen u first boot it up.Dont know if that helps
ipl 1.00
spl 1.00
gsm 01.09.11
os 1.8.11.1
Click to expand...
Click to collapse
Well I am in a good mood so I will answer quickly before you get flamed...
READ READ READ - It looks you are running a stock ROM. I have no way of knowing if it is unlocked or not.
First you need to upgrade to a 2.XX ROM. I would suggest unlocking it yourself to be on the safe side. READ and follow the directions exactly!!
Then upgrade to this ROM, again, after READING and following directions exactly.
WARNING - You can kill your new toy if you do not READ and follow directions exactly. Even if you do, you may still have problems. THAT is when you start asking questions here.
Cheers!
dcdivenut said:
Well I am in a good mood so I will answer quickly before you get flamed...
READ READ READ - It looks you are running a stock ROM. I have no way of knowing if it is unlocked or not.
First you need to upgrade to a 2.XX ROM. I would suggest unlocking it yourself to be on the safe side. READ and follow the directions exactly!!
Then upgrade to this ROM, again, after READING and following directions exactly.
WARNING - You can kill your new toy if you do not READ and follow directions exactly. Even if you do, you may still have problems. THAT is when you start asking questions here.
Cheers!
Click to expand...
Click to collapse
Thanx for the help.What 2.xx rom would u recomend?Do i need a new bootloader?
Again, you need to read
Go to this post:
http://forum.xda-developers.com/showthread.php?t=285435
Read and understand everything about it. This will tell you how to CID unlock your phone. Since you are IPL/SPL 1.00 then you don't have to do the Button rom downgrade (that would be an upgrade for you . You can try starting with lokiwiz (step 4 I think) and go from there. But if you get errors from lokiwiz then put the button rom on and do it again. Then continue with the steps and upgrade to the T-Mobile 2.26 ROM. That will get your IPL / SPL to 2.26 and give you a nice stable platform to work off of. Then (and only then) you can start looking at putting on custom roms like WM6.
so i have a G3?
http://forum.xda-developers.com/showthread.php?t=298613
thanks alot vippie thats excatly wat i needed

(newbie) frustrations...

I understand all the stickies that are posted before this post and all the other people who has had the same issues but I really need an anwser to this question that I have not found yet...
I have followed all the steps in every tutorial I have found in this forum for my phone to be upgraded to WM6 (shelltool, "follow these easy steps", etc..) but everytime I follow these steps word for word I always end up in the same start up screen (where IPL/SPL & OS is shown)...
What am i doing wrong? Should I update my radio (2.25) to "2.19" before or after installing the new rom? I mean thats the only conclusion that I come up with...by the way I tried that and I got one screen farther, its just that I got the startup intro bleep and the white screen of eternity....help anyone?
Cingular 8125 G4 (CID/SIM Locked)
IPL 2.25.0001
SPL " "
GSM 2.25.11
OS 2.25.1.11 (lastest WM5 cingular update)
-IF everyone decides to tell me to look it up, well fine, I guess I'll have no choice and spend another two weeks of searching the endless database....
You have a G4, shouldn't you be using LokiWiz to CID unlock it first?
Madcap180 said:
You have a G4, shouldn't you be using LokiWiz to CID unlock it first?
Click to expand...
Click to collapse
will surely try that now!
thanks alot!
hope it works!
DO NOT USE LOKIWIZ!!! you have been misinformed. if you have a G4, Lokiwiz will not unlock your phone and might brick it.
I don't think G4's can be CID unlocked with that tool.
When using shell tool, make sure that you have first installed Cert_SPCS and EnableRapi to your phone. Wait approx. 2 minutes, then soft reset. After soft reset, make sure the time and date are correct on the phone ( I can't get successfully flash unless I do this), then turn off the radio. Run shelltool. Some ROMS don't give an end message. If I haven't gotten an end message in 20 minutes, I open the task manager and end shelltool and pdocwrite in that order, then hard reset.
Good luck.
oh yeah, G4s can only be unlocked via IMEI-check.
mdhensley5 said:
I don't think G4's can be CID unlocked with that tool.
When using shell tool, make sure that you have first installed Cert_SPCS and EnableRapi to your phone. Wait approx. 2 minutes, then soft reset. After soft reset, make sure the time and date are correct on the phone ( I can't get successfully flash unless I do this), then turn off the radio. Run shelltool. Some ROMS don't give an end message. If I haven't gotten an end message in 20 minutes, I open the task manager and end shelltool and pdocwrite in that order, then hard reset.
Good luck.
Click to expand...
Click to collapse
thanks for the warning, i guess i can try waiting 2 mins after installing both cabs and checking the date and time...
I don't update my radio until after flashing a new ROM.
One way that I know I've had a successful flash is that approx. 10 -15 seconds after the IPL/SPL screen loads, the screen will dim just a little bit. If you aren't looking for that, you might not even notice that the screen is just a little bit dimmer. If I don't see that, I will flash Wizard Love and start the whole Shelltool process again.
Also, the first boot takes a little bit longer than normal.
Make sure b4 you go ahead and flash G4, read all about it. Its easier to Brick G4 than G3.
I looked at your initial post again and the IPL/SPL indicates that you have a G3 not a G4. A G4 will have 2.25.0001 instead of 2.25.001. Check that again. If you have a G3, you don't have to use Shelltool, but will have to use Lokiwiz after all.
make sure that you hard reset after fnish to flash with shelltolls
if this dont work, first apply shelltools and then a wm6 rom
always works here!
mdhensley5 said:
I looked at your initial post again and the IPL/SPL indicates that you have a G3 not a G4. A G4 will have 2.25.0001 instead of 2.25.001. Check that again. If you have a G3, you don't have to use Shelltool, but will have to use Lokiwiz after all.
Click to expand...
Click to collapse
yeah that was my mistake its: 2.25.0001
well it seams you havent read all threads and all tutorials, otherwise you should now that you have to CID unlock your device via imeicheck, there is no other way to do it.
I love newbie bricks!!
charly_mx said:
well it seams you havent read all threads and all tutorials, otherwise you should now that you have to CID unlock your device via imeicheck, there is no other way to do it.
I love newbie bricks!!
Click to expand...
Click to collapse
i love how your post was useless and false
nycelitemaster said:
Make sure b4 you go ahead and flash G4, read all about it. Its easier to Brick G4 than G3.
Click to expand...
Click to collapse
Hi I need yr urgent help - as when i download wm 6.0 i am stuck at 99% and then it does not proceed further - spent an antire day at this situation - pls advise & apprciate yr kind help.

A Noob in desperate need of help

Ok,
I have posted this problem in a couple of threads, but it always seems to get lost in the page after page of other questions.
Here is my problem. I have been reading this forum for weeks in preparation of upgrading my Cingular 8125. I got it 2 weeks ago, but still spent another week reading the tutorials and FAQ's so I wouldn't be a nuisance poster. Well things have gone so badly that I really need help.
I have a Cingular 8125, IPL/SPL 2.25 I have button flashed it over 20 times and I get an IPL of 1.08, but my SPL is still 2.25. I have tried other flashing methods, other files. I tried Xda_MiniS_LaunchROM_v154102. I have cleared the computer with nothing running. Booted and re-booted. I have gone back to 2.25 and tried button again and again.
I am so disappointed because I have spent so much time at this site, but can't even get past the first step towards flashing a new ROM. Please, any help would be appreciated.
How do I get my SPL down from 2.25
Steve
sdl said:
Ok,
I have posted this problem in a couple of threads, but it always seems to get lost in the page after page of other questions.
Click to expand...
Click to collapse
You should reply to your existing thread after a day or two to get it on top of the list again, should you haven't gotten the answer you need instead of creating countless threads over time about the same issue
Here is my problem. I have been reading this forum for weeks in preparation of upgrading my Cingular 8125. I got it 2 weeks ago, but still spent another week reading the tutorials and FAQ's so I wouldn't be a nuisance poster. Well things have gone so badly that I really need help.
I have a Cingular 8125, IPL/SPL 2.25 I have button flashed it over 20 times and I get an IPL of 1.08, but my SPL is still 2.25. I have tried other flashing methods, other files. I tried Xda_MiniS_LaunchROM_v154102. I have cleared the computer with nothing running. Booted and re-booted. I have gone back to 2.25 and tried button again and again.
Click to expand...
Click to collapse
It sounds like your phone is CID locked (this is something different as SIM-locked btw). I do not really know if this also affects whether or not you are able to flash IPL/SPL but it affects flashing the OS for sure.
I am so disappointed because I have spent so much time at this site, but can't even get past the first step towards flashing a new ROM. Please, any help would be appreciated. How do I get my SPL down from 2.25
Steve
Click to expand...
Click to collapse
Keep trying and looking, and eventually you will find a solution.
check the stickies and sure itll help you a lot. or if you an IM(ym/live) im glad to help you out. just pm me your id
happen to me too
hi there ..
check this thread http://forum.xda-developers.com/showthread.php?t=285435
at step # 13
13. You will see a screen that has ...
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
first key in "U" to unlock and then
you should key in letter "C" for cid unlock .
check step #16 you will see
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
Hoang
chev said:
check the stickies and sure itll help you a lot. or if you an IM(ym/live) im glad to help you out. just pm me your id
Click to expand...
Click to collapse
I have checked the stickies. Like I said, I 've been reading this site for weeks. I read it late into the night. Frankly, I'm all read out. I now know how to do a lot with this unit if only I could get the SPL down from 2.25.
I've got to get it down from 2.25 so I can run lokiwiz. Please help.
hoangtransport said:
hi there ..
check this thread http://forum.xda-developers.com/showthread.php?t=285435
at step # 13
13. You will see a screen that has ...
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
you should key in letter "C" for cid unlock, not the letter "U" ..
Hoang
Click to expand...
Click to collapse
Hoang,
You ran lokiwiz and it worked with an SPL of 2.25? It is my understanding that both IPL/SPL need to be 1.xx for lokiwiz to work. I'll give it a try though.
Steve
as i state , follow that step thru slowly and carfully, you will get it done. But first remember by heart that you have to make sure that you got a "G3" or "G4" ...very IMPORTANT
Hoang
hoangtransport said:
as i state , follow that step thru slowly and carfully, you will get it done. But first remember by heart that you have to make sure that you got a "G3" or "G4" ...very IMPORTANT
Hoang
Click to expand...
Click to collapse
Hoang,
Thanks for your replies. I'm sure it is a G3 because my IPL/SPL are 2.xx, not 2.xxx, which I have read is how you tell the difference. I have followed that post word for word.
I have been hitting "U" as the post states and it always fails. I assumed it was because my unit has not downgraded completely following step 2, so I didn't think step 4 would work until step 2 was done right.
But I will try your way as soon as I'm done my coffee and report back. Thanks again for your help.
Steve
ok steve now ...
read this thread do exactly step by step, check the link on that thread for the tool you need ..
http://forum.xda-developers.com/showthread.php?t=310831
Hoang
You're on the right track
In addition to the great help that Hoang and other members have given you, I would suggest having the Wizard Unlocking Wiki and Dr Puttinghams Definitive unlocking guide within arm’s reach. Both of these compliment vippies tutorial. Here they are:
http://forum.xda-developers.com/showthread.php?t=285435
http://wiki.xda-developers.com/index.php?pagename=Wizard_Unlocking
Two months ago, I unlocked my 8125 G3 (2.25 IPL/SPL) with no problems refering to all three of the tutorials (I just wanted to be safe).
After you initially downgrade your ROM to the Button ROM (you would only perform this step once)….
You only have to worry about having the same values for both the IPL/SPL after you run Lokiwiz twice (once for sim unlock and the second for the CID unlock). Your wizard will reboot both times, if you did it correctly.
At this point is when you need to make sure that your IPL/SPL are the same (i.e., 1.xx). If it isn’t, then you would be required to run the Button Rom again.
Somebody has gone through the same problems as you have experienced…check out this old thread from last year:
http://forum.xda-developers.com/showthread.php?t=277248&highlight=successfully
Stupid me. I am the perfect example of people who have read things over and over and still missed something.
When running lokiwiz, I copied the enablerapi.cab to my phone, but failed to go back to my phone and extract it.
Everything is perfect now. Phone is SIM and CID unlocked and I am already playing with the ne TNT 5.0 Touchflo edition.
Thanks to Hoang, reynavictor and everyone else who responded.
well, we should thanks to all the people who wrote up the instruction, and all those programer that create new rom for us to flash.
keep in mind that , there will be more new people like you and me suufer thru the unlock step. so prepare to help them out as paying forward ..
btw, how did you feel when you did unlock succcessfully?? just like a kid got a new toy !!! right?????
i'm glad you did it
hoang
hoangtransport said:
well, we should thanks to all the people who wrote up the instruction, and all those programer that create new rom for us to flash.
keep in mind that , there will be more new people like you and me suufer thru the unlock step. so prepare to help them out as paying forward ..
btw, how did you feel when you did unlock succcessfully?? just like a kid got a new toy !!! right?????
i'm glad you did it
hoang
Click to expand...
Click to collapse
Hoang,
You are absolutely right. Thanks to all that make these ROM's and tutorials available. It will give me endless hours of fun finding the right ROM for me. And Hoang, yes just like a little kid
Steve
Same issue
Hey I had the same issue with my 8125 on my first attempt. Again, read the tutorials, very important.
This is how my 8125 really became cid unlocked:
[First I used Lokiwiz2 to cid unlock. I then flashed the button rom. When I flashed I had IPL 1.xx and SPL 2.25. I ran the lokiwiz2 again and successfully cid unlocked (prior to this I received an error from lokiwiz). This 2nd unlock attempt with the button rom did it for me. After the cid unlock, I reflashed the button rom and both IPL, SPL were 1.xx.]
Now flash an OEM rom (Tmo or Cingular) so you dont have memory leaks. Now your ready to flash a WM6 rom.
Hope this helps.

Need WM6 Underground

Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005

now what??

i use t mob usa and already have an unlock tilt with the at&t rom (i think) it boots up showing the at&t logo and has a lot of at&t files. i want to load a new rom and have seen the rom for noobies thread but was wonder if i needed to do steps 1 - 3 or can i just download and load the rom without losing my lock and turning my phone into a brick. my friend has a dutty screen. any suggestions on a nice rom?
bigguyhawaii said:
i use t mob usa and already have an unlock tilt with the at&t rom (i think) it boots up showing the at&t logo and has a lot of at&t files. i want to load a new rom and have seen the rom for noobies thread but was wonder if i needed to do steps 1 - 3 or can i just download and load the rom without losing my lock and turning my phone into a brick. my friend has a dutty screen. any suggestions on a nice rom?
Click to expand...
Click to collapse
If you are already using that phone with T-Mo, then security unlock, hard spl and flash away! The best thing to do here is read read read! And dont be suprised if they move your thread! You can PM me though if you have any more questions! I will help you if I can!
sorry, just so that i dont turn my phone into a brick but what you are saying is that i can just flash my rom without any other steps.
thanks for the quick response.
bigguyhawaii said:
sorry, just so that i dont turn my phone into a brick but what you are saying is that i can just flash my rom without any other steps.
thanks for the quick response.
Click to expand...
Click to collapse
As far as what you mean by " lose my lock" I am not sure, but, you will need to CID unlock and hard-spl for sure! Do you have the AT&T Windows Mobile 6 or 6.1? I canot stress how important it is to read everything you can and be as informed as possible before you flash! I dont want to sound like I dont want to help (thats why we are here) But If you are already SIM unlocked it would still be wise to follow all the steps just to make sure you are covering all your bases, after all we do love our phones alot (often brought up by my sometimes jealous girlfriend! LOL! Read and use this...
http://forum.xda-developers.com/showthread.php?t=375583
Then if you get white screen dont panic just reset and go here follow instructions then go back and do the first one....
http://forum.xda-developers.com/showthread.php?t=354061
dashmaster1000 said:
As far as what you mean by " lose my lock" I am not sure, but, you will need to CID unlock and hard-spl for sure! Do you have the AT&T Windows Mobile 6 or 6.1? I canot stress how important it is to read everything you can and be as informed as possible before you flash! I dont want to sound like I dont want to help (thats why we are here) But If you are already SIM unlocked it would still be wise to follow all the steps just to make sure you are covering all your bases, after all we do love our phones alot (often brought up by my sometimes jealous girlfriend! LOL!
Click to expand...
Click to collapse
i have att windows 6.0. its already unlocked and i'm using on tmobile. what is
Hard-SPL? is this a file i should see on my phone?
bigguyhawaii said:
i have att windows 6.0. its already unlocked and i'm using on tmobile. what is
Hard-SPL? is this a file i should see on my phone?
Click to expand...
Click to collapse
No SPL is the bootloader on your phone when you hard SPL it keeps you from bricking your phone and allows you to flash non oem ROMs! If you Follow and read the links I just posted for you, you will be fine! I also use T-Mobile on a Tilt and I followed the steps and read alot and everything worked out perfect! I had to do the whitescreen fix, so it does work! I hope that helps!
P.S. Follow the instructions step by step, they are very important! Time consuming but worth it!
thank you very much
Please re-read the Newbies threads if you need an explanation as to what HardSPL is and how to install it and then flash a ROM. If you merely SIM unlocked to get on to T-Mobile, you will still need to CID unlock, so as a precaution you should do EVERYTHING in the newbies guide. Also, instead of just asking what HardSPL is, try following the links provided.
The community tends to be much more helpful when you have done your research and taken initative before asking for a direct hand out. This thread is better than average, but I thought I'd give you the heads up before flames come in from others.
Do everything here, all of it: http://forum.xda-developers.com/showthread.php?t=433835
Also note, the steps saying to remove your SIM and SD cards are very important.
Travito said:
Please re-read the Newbies threads if you need an explanation as to what HardSPL is and how to install it and then flash a ROM. If you merely SIM unlocked to get on to T-Mobile, you will still need to CID unlock, so as a precaution you should do EVERYTHING in the newbies guide. Also, instead of just asking what HardSPL is, try following the links provided.
The community tends to be much more helpful when you have done your research and taken initative before asking for a direct hand out. This thread is better than average, but I thought I'd give you the heads up before flames come in from others.
Do everything here, all of it: http://forum.xda-developers.com/showthread.php?t=433835
Also note, the steps saying to remove your SIM and SD cards are very important.
Click to expand...
Click to collapse
thank u flashed it already.......sorry for the simple question re: hard spl.
HardSPL
Follow the tutorials. Get Hard SPL. Don't cut corners, you may brick your phone. Hard SPL will allow you to flash basically worry free.
It's great that your phone is unlocked, but that doesn't mean you can't brick it. I'd try to explain in greater detail, but the sticky posts at the top of this forum should be much better at it than I am.
Please post your questions in one of the threads already created. No need to create a new thread for random new questions.

Categories

Resources