Database Info

stuck after update failure

Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.

An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!

How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.

what are the steps that u take? let us know if u are missing any

HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!

what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour

Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!

OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.

ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..

nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!

okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!

xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there

need help flashing my vario iv to wm6.5 please!

Hi, ive flashed a few handsets before (wallaby x2, alpine and a wizard) and had no problems but for some reason cannot even get off the first hurdle with my t-mobile vario iv and cant even unlock the dam thing to flash a custom rom! ive looked at post after post and downloaded so many programs like hard spl and nothing works. the programs ether wont even open or they fail half way through the process but havent bricked my phone so far (fingers and toes crossed!) please could someone help me with what unlocking software i need, what radio rom and main rom i should be using. Really i would like to try a standard wm6.5 rom and then try custom roms after but like what nrg have done if stock is not avaliable. its model is RAPH300 part no- 99HFP013-00
my current rom version is 1.69.110.8 WWE
my current radio version is 1.02.25.19
protocol version 52.33.25.17U
my email is [email protected] if you prefer to help via email
thanks in advance everyone, steve.

Anyone out there?

Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!

duke_stix said:
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
Click to expand...
Click to collapse
thanks for trying to help, have you ever read something over and over and repeatedly missed something in it? i think thats what i did wrong. i did not see the bit about removing my sim card even though i had read the noobs guide again and again. removed my sim and bosh, spl worked! then everything else was a breeze and i am now running the energy 3.0 wm6.5 rom! havent flashed the radio yet but will probably do that today. the energy rom is a vast improvement on my stock 6.1 rom in many areas and seems to have improved camera performance quite a lot (not quality) and the menus are going to be great once i have got used to the totally different interface. does anyone have any sugestions on other roms tha may be better than this one?

Hi there
Glad to hear you got it working!
I am personally using NATF's WM6.1 lite touch pro rom as all i look for in a rom is stability as i actually use my phone for phone/text purposes and there is nothing more annoying than a hanging phone when your trying to quickly reply to a text message!

Tilt Flashing Issue, this is a repost

Hey Guys,
First off this is a re-post, me old thread was closed, I am sorry for reopening but I am still having this issue. DaveShaw and smokestack76 had posted. Dave thank you for your reply but I have been through the noob flash guide and many many many other threads and it does not resolve my issue.
I'm not new to flashing and roms, I have flashed at least 100 times and have done some cooking. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed fine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
I have tried flashing spl from the sd and yes spl image was KAISIMG.nbh and KAISDIAG.nbh was on there as well. Card is formatted fat32. HardSPL would start, read the file and get stuck on loading.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever it is released, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
I have the stock 6.1 att rom up right now but I would like to resolve the issue.
__________________

finally finally got the patched version of 3.29 flashed. I will let you guys know how it goes from here. I am on a different computer at work.

Success!
I started from complete scratch and a fresh brain and was able to get everything going.
After I got the os back up i was able to start jumpspl and get it to connect via usb. Then only the force usb on 3.29 patch would work. After that repaired active sync and I was ready to go. Thanks smokestack79 for the late night help last night. I was out of it and frustrated. Seems like she's got a little more life in her after all.

Anyway to stop ROMs re-installing?

Hi there all, firstly, i have tried the search button and found nothing, i am having a little problem with everytime i soft reset or turn off my phone the rom re-installs and i have to go through importing sim contacts data setup etc all again.
It also deletes any apps i've installed and its getting me slightly miffed.
I am using 6.5 TPC V11 Mega WWE rom (however whatever rom i flash it does the same) radio 1.70.19.09 (again I have tried various radios) and various HardSPLs - currently using 3.29 i believe.
Is there something the matter with my internal memory maybe? i know sometimes whenh it reboots it tries to load into windows again but gets errors such as "bars.cab failed to install"
SO guys any ideas, i know it will probably be an easy fix!
Thankyou in advance
Paul

well this is the wrong place to have posted this but try this and see if it helps
1. try flashing via sd card and not usb cable, and vice versa.(see sticky to guide u thru sd card flash process
2. try flashing stock rom
see if that helps

If a problem with a ROM ask/report in ROM thread, the F.A.Q's at the start of threads cover the hard-reseting issues with 6.5 ROMs.
Thread closed.

No x7510 ROM flashing for me. Help!

I previously loaded 3.29.xTep_3.00 with hardspl 3.05. It's been running fine, but I wanted to try some different ROMs so downloaded several. None will work. No other versions of hardspl either. no radio upgrades/downgrades either. Everything is fine until I get to the gray load screen with the % of progress. It gets to 1% then bails. PC returns "ERROR [270]: UPDATE ERROR The Image file is corrupted. Please check your update utility." I have tried on 3 different PCs, reformatted flash drive and internal storage, removed all cards.. not sure what else to do. Can't find directions anywhere for MicroSD flash for the x7510 or i'd try it. Only thing odd about my device, besides this, is that the GPS stopped connecting to satellites several months ago (another bummer). Any ideas?

I got this result when I just removed the minisd card and didn't remove the cardadapter. Once I had removed the adapter everything was fine but you have probably done this so... I don't know what to tell you. Second time I flashed I remembered the procedure wrongly and I kept putting the phone into bootloader mode before I flashed I ofcourse got the same lack of result then, once I flashed from windows not bootloader everything was fine.

Thanks teacher1960, I have made sure all cards/sleeves/sims etc are out. Not loading from boot-loader, etc. Sadly, just screwed I guess, when it comes to ROM experimenting. The ROM currently running is the best of all i've tried, so my heart is a-pining, but not destroyed. If anyone knows how to boot from an SD card (I have a 2 MB non-SDHC card that I used to flash my TYTN2 with) I would love to know the steps. Thanks again.

I would try to SPL back to stock-SPL and then start all over again.
As being explained here.

dumbquestion said:
I previously loaded 3.29.xTep_3.00 with hardspl 3.05. It's been running fine, but I wanted to try some different ROMs so downloaded several. None will work. No other versions of hardspl either. no radio upgrades/downgrades either. Everything is fine until I get to the gray load screen with the % of progress. It gets to 1% then bails. PC returns "ERROR [270]: UPDATE ERROR The Image file is corrupted. Please check your update utility." I have tried on 3 different PCs, reformatted flash drive and internal storage, removed all cards.. not sure what else to do. Can't find directions anywhere for MicroSD flash for the x7510 or i'd try it. Only thing odd about my device, besides this, is that the GPS stopped connecting to satellites several months ago (another bummer). Any ideas?
Click to expand...
Click to collapse
Greetings,
i have the x7510 for more than 2 years, may be since i joined xda-developers and since that time i have been trying to upgrade it from 6.1 to any given cooked room. i have tried your roms several times but each time it ends with error. every thing goes smooth till it reaches the tri-color where it shows spl 3.05.0000 then screen goes wight with 1% only then it reboots and on the desktop it gives the following message:
ERROR 270: UPDATE ERROR
the file is corrupted, please check the update file
i remeber i posted several times with no reply
would you please help me to solve this problem, please