Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
again wrong forum
Related
Hi all,
I am trying to install iGuidance on my wizard and i have been unsuccessful. Currently Faria's rom is installed on it and it is working fine. But i couldn't install iGuidance for GPS navigation on it. It was working fine with WM5. Any suggestions. I do have tomtom but i prefer iGuidance.
Please help.
Thanks.
hummer5 said:
Hi all,
I am trying to install iGuidance on my wizard and i have been unsuccessful. Currently Faria's rom is installed on it and it is working fine. But i couldn't install iGuidance for GPS navigation on it. It was working fine with WM5. Any suggestions. I do have tomtom but i prefer iGuidance.
Please help.
Thanks.
Click to expand...
Click to collapse
Well, it may be one of those apps that has problems with WM6. My Map4PDAs doesn't really work well under WM6 either
--M
just installed iguidance on faria WM6 rom.
It's working well. Don't know what you mean.
Mine is working too, I have Iguidance V3 using Faria's CB ROM.
Mine is working fine too. Although I did not install it. I had it on my storage card and just ran it from there. No need to reinstall.
I using faria wm6 rom and iguidance ver 3.0.1 is working for me too
I tried installing it on the card but it didn't work. Now can some one tell me what does it install on the registry so that i can try to do so. I had it installed on my memory card with wm5 but i think it installs some files to the main registry also. can some one help please.
i got the iguidance app installed on the main memory and the maps are loaded on my minisd card. that way whenever i flash to a new rom, i just reinstall the app on the main memory again and i don't have to reload the maps.
that is just what i tried but it didn't work. Is it possible for you to load the application which you install, may be mine is faulty. It says around 12MB. Kindly post if possible so that i can install on my main memory or card which ever is recommended.
thanks.
Try Iguidence v3, the v4 does not be good with WM6.1
Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
Considering that cab file is from the Hermes/ WM6 Black ROM, it's probably NOT going to work on a Wizard.
Based on looking at the cab, it replaces 4 .dll files. My guess is that those are not compatible with the Wizard drivers. Just do a remove program and see if that fixes it. If not, then delete these four in \Windows and you should go back to the ones that were built into the rom:
serial_btur.dll
OEM_Misc.dll
btagext.dll
bthuart.dll
mfrazzz, do you maybe have a cab file for the bt drivers in your rom?
Hmmz, your tip worked. Thanks. I simply renamed those files to *.org and that did the trick. But maybe a question though, aren't there newer BT drivers for our wizzard?
You are a total @#$%$#@. What would make you think they were even for the wizard? And those bt drivers never even helped the the problem that black was having on the hermes. You need to do some more reading buddy. Lets not end up with bricks here
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...
I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?
paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.
Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.
tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.
By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.
Hi all,
I have recently bought a Kaiser from Orange in The Netherlands. The phone had a Dutch OS installed and since I am Dutch illiterate, I HardSPLed my device and loaded the Kaiser release ROM that I found in this thread: http://forum.xda-developers.com/showthread.php?t=331900
The problem is that, when I tried to install TT6 found here: http://rapidshare.com/files/56585274/6_032_8351.rar (the link was found in the Kaiser Wiki), I get this error message:
"Unable to install Application. Please update your device ROM to the required version before trying again"
Needless to say I am completely lost...
Please advise, and if possible, point me to a newer English ROM that might solve this problem.
Thanks in advance....
That cab you have, is the tomtom installation cab that is shiped with certain htc phones. On other devices/roms it doesn't run, because the cab checks if the appropriate rom is loaded.
Try find another CAB. There are some cabs where the check is removed.
You can also extract the cab with WinCE CAB Manager and copy the files manually to your device.
Thanks Krypt!
It worked.
Cheers
Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!
Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...
OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks
Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance
you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help
Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers