HELP ME after Upgrade with faria my qtek is blocked - 8125, K-JAM, P4300, MDA Vario ROM Development

help
1-my qtek wm6 faria v1 after many bug
2- i upgrade with faria v2 latest
3- my config (battery max , active sync 4.5 full ,cable nice)
4- after upgrading 100% active sync is ok but my qtek restart and off
5- my qtek not started and lampe is off and not connection with pc
6- hard reset not fonction
help me please

Try reset and camera button to enter bootloader.

after more ....
not responding

medmed said:
help
1-my qtek wm6 faria v1 after many bug
2- i upgrade with faria v2 latest
3- my config (battery max , active sync 4.5 full ,cable nice)
4- after upgrading 100% active sync is ok but my qtek restart and off
5- my qtek not started and lampe is off and not connection with pc
6- hard reset not fonction
help me please
Click to expand...
Click to collapse
Well you could try to hard reset the device and then try,also try to take the battery out for about 10min and then try to boot.

and for are the cable usb what it must be or not connected?

not responding please help me

Read all of the stickies about upgrading your phone. There's a lot of good information on how to properly flash your phone and fix it if you screw up.
For you, I recommend going back to the default carrier ROM until you understand how to flash your phone.

Related

Jam UPDATE kill my pda

I recent have an error while Upgraging my Jam whith latest firmware..
Evrithig goes ok but after stage 1 I ve got DAWN screen
And my jam has not worked anymore ..
Look the attached Screen
maybe anyon know about this problem ?
Same Problem
Hi Xaoc,
I have the same problem with my T Mobile MDA Compact. My Compact does not work anymore, too. When I try to turn it on, it does not. It turns on the Bootloader mode. On the screen; at the top it writes "Serial" and at the bottom it writes "v 1.00" and thats all, it does not turn on anymore.
It occurs when I tried to flash my German ROM to English ROM.
Once I solve the problem I will inform you. Please inform me if you solve the problem.
Thanks
AE
Ok man..
I will post info here, or just send this devise to technikal support
Technical Support
Sending the device to technical support will be the last choice. If they accept the device as this condition under the warranty no problem otherwise they will charge too much money to fix the device!!!
AE
Hi Guys. I have absolutely the same problem see http://forum.xda-developers.com/viewtopic.php?t=19548 here. Try one thing. It´s not solution, but for me working as emergency solution. Try to pull a little bit back battery cover to disconnect battery for a second and then push it back. Try to push on/off button. Device should start. And never do a soft reset by soft reset button or by software reset button. Always use back side cover or the device start in bootloader meno again.I alread try almost everything to solve the problem and no way. Even my compact cant read backuped SD card. That´s why I have only this emergency solution
I don't have this problem myself, but I read on this forum somewhere that connecting your Compact to to USB cable and running the update program again should fix this error. The error bascially means that the ROM upgrade failed. re-connecting and re-running the upgrade program from your desktop pc should work. Good Luck and let us know whether it works. In several other threads the problem is mentioned and fixed, so do a search.
It will work, trust me
When you see that "serial" and "v1.00" thing. That's means you are half way there already. That's in boot loader mode. When you take off the back cover (battery cover) and put that back, yeap... it'll work. Somehow that bypass the bootloader mode for that particular "restart".
What you need to do is. Just reconnect back and do the flash again, since you would have rebooted your desktop pc or laptop (the one that used to flash your Magician).
For those who encountered similar problem, restart your machine (desktop pc or laptop). then reconnect back. Try run the update again. This time, it will not be able to detect your current ROM version cause of the "boot loader" thingy. Just flash it... yes, you'll get it. Give it a try. I've done on mine and so do many others. Have fun.
cheers,
cyberjaya
I solve the problem
Hi all,
I had the same problem and finally I solved it, however now I have a French QTek S100 ROM.
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
I had the same problem
Hi,
I had the same problem. My desktop computer shut off during the update and the second time it stoped in the same %.
I solved the problem switching computers to my laptop.
good luck
S100 English ROM
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
T Mobile MDA Compact (using Qtek ROM)
ROM version: 1.03.02 FRE
ROM date: 11/02/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.157 FRE
I Mate JAM ROM
Hi All,
I used I Mate JAM ROM and now my MDA Compact is working in English.
AE
T Mobile MDA Compact (using I mate ROM)
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.06.150 WWE
Hi all
I have the same problem
When I upgraded my mda compact it started to upgrade
and it did not passed zero it tolled me just like in the picture in the first post
and it did it again and again and again
and finaly it crashed
it shows the boot loader
Serial
v1.00
Can you guys tell me how to fix it!!
Thx aloooooooooooooooooooooooooooooooooooooooot
qtek rom
hey cyberjaya..u said u r using the qtek rom on ur magician (mini) and m using the tx2.03 rom please can u let me know d difference between both roms which one
is better in each n every aspect that is m talkin about the (GUI),stability,features n etc..
please can u let me know so tht i can take a decesion whether to flash my device or not please...let me know.
thanks.
Chigz

qtek s200 dead?

tried to change the rom on my s200 because i think is wasn't working good.
problems with bluetooth, taking 20 min to restart after a restart.
now i think i did several things weren't good.
the screen is stuck in the tree colors.
can somrbody please help me?
or is my pda ready for the dustbin?
look here -> http://forum.xda-developers.com/showthread.php?p=1027323#post1027323
have tried to download those .
but i get that there is a timeout for this action.
?????
where did i go wrong?
Qtek S200 dead
Hi
my qtek s200 was connected to pc via active sync. i shut down my laptop and when restarted the set was halt.I tried to restart it by the reset, but it failed and now no sign of life.
i even tried hard reset.can any one help.plz reply soon.
You must read the link in post 2.

upgrad prblem jamin

i madd up date for my pocket prophet imate jamin with ver
RUU_Prophet_220734_2207114_024721_NVID.exe
RUU_Prophet_220734_2207114_024721(AKU2.3)_lvsw_edition_PS8Mb.exe
but when i made restart i got spalsh screen and pocket hange .
i can not solve this problem can u hlp me .
eltabry said:
i madd up date for my pocket prophet imate jamin with ver
RUU_Prophet_220734_2207114_024721_NVID.exe
RUU_Prophet_220734_2207114_024721(AKU2.3)_lvsw_edition_PS8Mb.exe
but when i made restart i got spalsh screen and pocket hange .
i can not solve this problem can u hlp me .
Click to expand...
Click to collapse
1. dowenload this latest i-mate official rom from here
2. enter your jamin into bootloader mode by pressing power +camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the jamin to your pc (make sure your battery is fully charged)
4. run the i-mate official rom.
5. good luck!
SAME PROBLEM with JAMin
I've tried this rom but I received this massage.
"ERROR[296]: UPGRADE ONLY"
IPL 1.00
SPL 2.20.0001

help in jamin stop in boot loader moood

hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
jamin G3 with SPL 2.13.0001
Hi:
Sorry my english isn't good. I'm spanish.
I read some forum but i don't read the same problem I've.
I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.
After i need install the original rom, but the problem now is:
Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001
If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)
I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".
CAn you help me?
I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.
THANKS
my email: [email protected]
THANKS THANKS THANKS THANKS
melmel1989 said:
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
Click to expand...
Click to collapse
I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.
IPL 2.13
SPL 2.13.0000
We tried but can not find solution!
I am tired of asking for help, and nothing!
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547
aia_6584 said:
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
Click to expand...
Click to collapse
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
TJSM said:
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
Click to expand...
Click to collapse
1. go to my guide, download PVtemp first ~~~~
2, force the prophet to bootloader mode, (how to? see my thread)
3. plug back to USB ( rear PC USB port please...)
4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!
5. Flash PVtemp NOW .... delay is bad~~~~
help me about this
hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?
have you tried to Hard Reset the unit after flashing to WM6.1?
You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

Categories

Resources