Anyone make switch from Hermes to Vox? - HTC Vox

Thinking about a change in form factor and trying out the Vox but I'd like to hear some experiences of anyone who went from Hermes/touchscreen to smartphone format.
I'd love to wait for the rumored 'wings' S730 but not sure that will ever see daylight.

I had the TyTN via my employer for a few months, but had to return it when I left that job. Got a S710 and I actually like that more than the tytn. I thought I would miss the touch screen but the vox is so easy to navigate that it's no problem.
rgards Björn

i have both the TyTN (cingular 8525) and the Vox in my hands.
I had the TyTN first as a replacement for my treo 600.
The TyTN is a wonderful device, but a bit too much for what I use it for (I dont even use data, so 3G doesn't matter to me). I mostly use WiFi for the occasional browse.
The TyTN definitely has a larger customization factor, which i miss with the Vox.
I thought speed would be a definite difference, but if you use OmapClock to ~250Mhz, it's a significant increase in performance.
Video playback works real nicely with TCPMP on the Vox too. Some video's i don't even need to convert. It may not be as powerful as the TyTN, but it's sufficient for my needs.
I like the Vox formfactor a bit better. The slider is much more secure, and the numeric keypad is something i missed on the TyTN.
Sometimes i catch myself tapping the Vox, forgetting there isn't a touchscreen, but the menu's and programs are very smartphone friendly, and I haven't had any problems navigating menu's as yet.
and for some reason, the screen on the Vox seems a bit nicer than on the TyTN. could be because the TyTN has the same resolution, but larger size, so it doesn't look as sharp.
i'm keeping the Vox, anyone want a TyTN?

anitanium said:
i have both the TyTN (cingular 8525) and the Vox in my hands.
I had the TyTN first as a replacement for my treo 600.
The TyTN is a wonderful device, but a bit too much for what I use it for (I dont even use data, so 3G doesn't matter to me). I mostly use WiFi for the occasional browse.
The TyTN definitely has a larger customization factor, which i miss with the Vox.
I thought speed would be a definite difference, but if you use OmapClock to ~250Mhz, it's a significant increase in performance.
Video playback works real nicely with TCPMP on the Vox too. Some video's i don't even need to convert. It may not be as powerful as the TyTN, but it's sufficient for my needs.
I like the Vox formfactor a bit better. The slider is much more secure, and the numeric keypad is something i missed on the TyTN.
Sometimes i catch myself tapping the Vox, forgetting there isn't a touchscreen, but the menu's and programs are very smartphone friendly, and I haven't had any problems navigating menu's as yet.
and for some reason, the screen on the Vox seems a bit nicer than on the TyTN. could be because the TyTN has the same resolution, but larger size, so it doesn't look as sharp.
i'm keeping the Vox, anyone want a TyTN?
Click to expand...
Click to collapse
How does it compare, size wise, to the Hermes?

the tytn is a giant compared to it
its much lighter than the tytn, i barely notice it on my waist holster
about 1cm shorter and 1.5cm slimmer
about the same thickness though
i can take some pictures when i get home

I had both a Wizard and a Tytn before I bought this device.
Those are more of PDAs that can be used for phones calls.
This is more of a PHONE that can be used from some PDA functions.
I see the Hermes and Vox in 2 totally different categorys.
BUT
I do miss touch screen, and I miss the SPEED...
My vox seems really SLOW AND LAGGING! Does anyone else have this problem????? Is there some fix i need to add or a certain ROM I need to install to make the run smoother??
The complaints I have about this device is its performance! I also find it is alot harder to type with a substanitally smaller keyboard. As well, WHY DOES IT SLIDE OUT "THE WRONG WAY"????? And no flashlight for the camera.

use OMAPCLOCK to overclock the vox
i notice a substantial difference, especially when switching apps and playing videos, and landscape switch is faster too
and if you notice it lagging still, go to task manager and see what you have open
one thing about the tytn i liked is the ability actually CLOSE programs and free up ram, not have them suspended

anitanium said:
use OMAPCLOCK to overclock the vox
i notice a substantial difference, especially when switching apps and playing videos, and landscape switch is faster too
and if you notice it lagging still, go to task manager and see what you have open
one thing about the tytn i liked is the ability actually CLOSE programs and free up ram, not have them suspended
Click to expand...
Click to collapse
No X-Button for WM6 Standard?

i switched from tytn to s710 too. only missing voice command DE on my vox, since ist is only avalible in english for smartphones.
S710 is more compact and better to use, due the normal phone keys. i like it more. the only bad thing is the 200 mhz cpu, which is not the fastest...
the battery lifetime is much better, even with data and bt switched on. I use data to sync my exchange 24/7
.

I got my Vox a few days ago
Size difference between Vox and TyTn is like a Poodle compared to a Great Dane - huge difference. I'd never carry my TyTn in my pocket but I do my Vox easily.
Speed is a huge problem with my Vox but I will try to overclock.
Fiddle Factor - pain in the but but kinda fun changing the Home screen .xml files so you can get it the way you want it -- I had to modify to get GoodLink stuff while keeping PhoneAlarm running.
WiFi worked well at first glance - for some reason I had more trouble with my TyTN.
Many programs (that probably would be fine since I often don't use the touch screen) won't install on the Vox. Does anyone know how to easily "force" a PocketPC program on a Smartphone ?? (I haven't exhaustively searched that question so just ignore if the answer is obvious).
I'll keep you posted on my first week of use. I'll keep my TyTn in my briefcase.

mikegoldnj said:
No X-Button for WM6 Standard?
Click to expand...
Click to collapse
Hello everyone, I'm an 1-week-vox owner.
Generally speaking I like the device very much, altough I am having some difficulties adapting from palm to WM6, and I must say I am a bit disappointed with WM6, namelly it is very slow and, something I found soooo odd and (sorry for sincerity) stupid: programs don't actually close/terminate when I close them (????).
So I have been searching the web for a program that would compensate that flaw (I consider it a flaw, at least the user should be given the option to configure the close button) and have tried:
magic Button
InClose
smClose
Running Programs 1
And, last but not least, HTC x-button.
None of these work on my s710, I guess it is because s710 is a smartphone and all those programs where designed for PPC.
Is there somewhere a WM6 for smartphone compatible program that makes the red-key actually close the programs? I don't need a task manager, just a simple, small app.
Thanks everyone

Related

Qtek 9600/HTC TyTN vs. HTC P3600 which one?

Can anyone tell me which of these HTC machines I should go for...
* Qtek 9600 / HTC TyTN
or
* HTC P3600
I would like to have WLAN, ability to use VOIP sip phones on it, useful for navigator, I would prefer QWERTY but not 100% important... on which one of them can I also use TomTom or any of the navigation systems out there...
thanks for more information
Tytn
if you edit and re-title/subject you're more likely to get responses from people who have either or both devices.
But my choice will be the Tytn because 1 the HTC P3600 is not available where I am, 2 I'd miss the keyboard after having a Wizard and 3 looking at the wiki, they look the same except for battery life and mine gets plugged into my pc every day and charges anyway.
B
thanks bbobeckyj for ur response... I wonder what sort of keyboard is with the P3600 as I haven't seen any picture or any info about this. I also think the TyTN would be nice for its QWERTY since using P990i small QWERTY made my writing much fun...
I am basically planning to get either one of this gadgets basically for VoIP over WLAN purposes & navigation since I own a SE P990i which lack the VoIP from Skype or any SIP soft phone but I wont mind enjoying easy texting to webpages and emails...
sorry,
I wasn't very clear,what I meant to say was that they look the same except the keyboard AND the battery life,
there is no board with the p3600,
B
please what is the board and what keyboard is with the p3600? I am new with these machines but I want to know b4 i make the final decision...
thnx
no keyboard on p3600
There is NOT a keyboard with the p3600. I was a little unclear in my first reply.
They look the same except the Tytn has a keyboard but a shorter batery life.
So basically, do you want a keyboard or a thin phone?
Sorry for the confusion,
B
i would like to have a keyboard but if I know what is on the p3600, i can decide properly. how can i type SMS on the p3600 if there is no keyboard or physical dialpad?
thnx
Tytn vs 3600
The Tytn (also i-mate Jasjam, Dopod 838 Pro) has a sliding keybord. Type in Jasjam or Tytn to Google and you'll get 1000 pictures. The 3600 lacks the keyboard, but has a functioning GPS chip that is only waiting for a factory ROM to make it work. Unless they can solve some hardware issues the Tytn will never have GPS so you will need a Bluetooth GPS receiver with the Tytn. It will them work as a Navigator. Check
http://www.calculatorking.com.au/images/dopod 838.jpg
for just one reference.
"i would like to have a keyboard but if I know what is on the p3600, i can decide properly. how can i type SMS on the p3600 if there is no keyboard or physical dialpad?"
pda phones have touch screens and support you writing sms's in handwriting on the screen or using the software keyboard in the software
p3450. herald (i think) is halfway between the wizard and tytn. look them all up on youtube to get a good view
B
Rudegar said:
pda phones have touch screens and support you writing sms's in handwriting on the screen or using the software keyboard in the software
Click to expand...
Click to collapse
thanks everyone for the input..i do like TyTN for the keyboard as it is quite stylish and fast to type SMS or use emails but with that P3600, it will be difficult to achieve that. I am indeed interest in the GPS and faster system in the P3600 but since many things even needs to be solved on the model,I better 4get about it

Questions about HTC Cruise

I recently switched from using the ATT Tilt to the Cruise (mainly because it's smaller/lighter to carry around) It's mainly working ok, but I have a few questions:
1) Does anyone know of a decent handwriting recognition software out there I could use? On the TILT i got used to the "block-recognizer," as the lesser of evils, but i would LOVE to find software that can use the whole screen. I use these devices a lot, so after a while that lower left corner becomes all scratched up (even using a screen protector) , and then you have to pay about $200 for a new screen, since the characters no long respond well to Block Recognizer. I"ve tried the "Transcriber" that comes with Windows Mobile 6, and it seems awful, as do the several other programs i found online, such as Pen Writer and Caligrapher, i think they're called? Back when i used Palm/Treo devices, i really loved the Teal Script program, but it doesn't seem to work for W Mobile? Anyone know of anything that could work??
2) Some things worked better on the Tilt, i guess becuase of the ATT software? For example, on Tilt you can use the word completion software in the Calendar mode, but on the Cruise it doesn't come up. And the word completion software "remembers" two-word or longer phrases in the ATT Tilt software, but not in the Cruise. Is there any work-around to be able to do this on the Cruise too??
3) Is it worth trying to upgrade to 6.1 on the Cruise, through some kind of cooked ROM, or better to wait until HTC finally (hopefully) releases the 6.1 ware??
Thanks much!!
Daniel
1. sounds like transcriber
http://www.microsoft.com/downloads/...familyid=a8b343c3-2eee-41e3-9339-f7b303f4b386
Sorry, but Transcriber is already on the device, and it seem terrible to use?!! Isn't there ANYTHING out there that works ok??
Thx much!
D

Anyone coming from the TyTN II or Kaiser?

How is the new experience with the TP? Is it worth the money for the average Joe? Which features are notoriusly superior? Thanks for any details...I´m on the fence about the upgrade....
asolano895 said:
How is the new experience with the TP? Is it worth the money for the average Joe? Which features are notoriusly superior? Thanks for any details...I´m on the fence about the upgrade....
Click to expand...
Click to collapse
There is a similar thread asking the same/similar question - do a search.
1. Missing key mapping, kaiser can map a hardware key u want, TP cannot. (no app support remap hard key on TP)
2. Slow, rearly slower than kaiser, may be 640 x 480 device more hungry?
3. Keyboard miss "win" key & "ok" key.
Yana said:
1. Missing key mapping, kaiser can map a hardware key u want, TP cannot. (no app support remap hard key on TP)
2. Slow, rearly slower than kaiser, may be 640 x 480 device more hungry?
3. Keyboard miss "win" key & "ok" key.
Click to expand...
Click to collapse
1 can be done through registry editing or using a program like (AEBPlus) I think it was?
3, the American version has that. :O
Oops, just realized the OP is from CR, so the American version won't help him much.
asolano895 said:
How is the new experience with the TP? Is it worth the money for the average Joe? Which features are notoriusly superior? Thanks for any details...I´m on the fence about the upgrade....
Click to expand...
Click to collapse
Not for the average joe I guess lots of eye-candy goodness for VGA, but still slow imo when using touchflo3d. Still need to get used to TomTom in VGA.. it's renders the streets really small compared to my tytn II before!
asolano895 said:
How is the new experience with the TP? Is it worth the money for the average Joe? Which features are notoriusly superior? Thanks for any details...I´m on the fence about the upgrade....
Click to expand...
Click to collapse
I am pleased with TP, as it open up more options for VGA and G-Force appliaction. I used to flash a lot of ROMs since I was using Kaiser, but I am quite satisfied with TP original rom, only doing some tweaking here and there...
I agree that the speed is slower than Kaiser, but I believe with more people using TP, there will be better solution in XDA. Would everyone agree on this?
Black93300ZX said:
1 can be done through registry editing or using a program like (AEBPlus) I think it was?
3, the American version has that. :O
Oops, just realized the OP is from CR, so the American version won't help him much.
Click to expand...
Click to collapse
AEButton Plus can't map more than a few hard keys on the face and sides of a device, as far as I know (and I have it installed on my Mogul)
I don't regret going from my Kaiser to the TP at all.
After following some of the "Tweaks" suggested in the below threads and installing most of the programs to my memory card I honestly don't feel a speed difference.
I just see the TP as the Kaiser done properly - OK anything running on WM will have small bugs, but as ecoline said the more poeple using the TP the more we'll clear the bugs and improve the TP's performance.
Raphael Tweaks
Advanced Configuration Tool v3.2
Tweak collection for the HTC Touch Pro
Another thing I want to add-- TP is like Kaiser buffed for VGA processes. Bigger images to render = more power and memory to do it. All of my contacts in my Kaiser has a full screen contact picture for S2U2, and checking them in TP they've been reduced about 1/3 their size. It was fast browsing them, but as soon as I changed the pictures to match the size of my TP screen browsing them was slow. S2U2 for VGA needs more memory than the QVGA.
So it's like using Kaiser but VGA. Still slow in my standard, but lots of VGA goodness
I found the Kaiser with Touchflow 2D installed (along with the other cabs for all the other apps that are on the Touch Pro) was actually a lot nicer to use. The screen updated instantly (e.g scrolling left and right on the tf bar, you could see the cursor under your finger and the screen always kept up); whereas on the Pro you see the cursor follow your finger and the screen update is about 12 frames a second.
All in all, with the Kaisers screen update and finger following speed makes Touchflow a nicer experience.
But.... the Touch Pro screen is fantastic and in VGA which makes everything so crisp. The keyboard is even better than Kaisers and has full querty 5 lines. The look of the phone is sexy for once. The size of the phone is much better even though it is only 1cm shorter (a couple of mm thinner and it would be perfect). The camera actually takes good pictures that I actually keep, the first for a camera on a phone for me, though the LED flash is just like any other - bit of a gimmik. Everything else hardware wise is at least as good as on the Kaiser or better.
In my first week I found the Touch Pro to be very buggy and slow. It's crashed a couple of times, freezed for no apparent reason (from 1 to 20 seconds), the screen update in the interface is slow and annoying, the finger detection sometimes seemed to miss now and then making it annoying to use at times. Typing messages would freeze randomly at about 100 typed chars intervals and then come back 10 seconds later!!!
Sounds bad doesn't it?
But, I have since fixed most of the problems. Have since upgraded to the DXS v15 ROM, done a few of the tweaks from this forum, fixed the typing freeze bug by turning WiFi power to "best performance" (strange but it fixes it). I'm hoping the WiFi power setting fixes other freezes I've experienced.... time will tell. I've even managed to stop it auto connecting to GPRS data with Pocket Toolman 2 (I have have to pay for data on my contract), prefer to use WiFi, this should be an option in Windows Mobile but isn't.
Now, after a lot of fiddling the phone seems to be very usable, dare I say very nice to use. My main gripe is that the interface doesn't run quicker with fast screen update and have better finger input accuracy from being faster. I can't see why this can't be fixed, if the Youtube app can show videos at 20fps (or whatever it is) whilst downloading & decoding mpeg and read the touch screen, why doesn't Touchflow manage to display 10 2d image at a decent framerate (as you finger scroll the bar to select the view, all it is doing is displaying static screens to show which you have selected).
Oh, and there are a couple of things missing or wrong with the Touchflow apps too. For instance, the 3d email view is very nice but there is nothing to show which emails in the view are unread; And there is no way to tell if you are at the first or last email.... or any other. The image view needs an option to rotate the image (it rotates if you turn the phone, but if the image is wrong and needs rotating, it will just rotate to the screen orientation and still be wrong). The email view does really need updating as it is like a dumb blonde - pretty but useless, you end up having to go into the normal email list view to actually manage your emails.
I'll conclude with this though: At the end of the day I wouldnt go back the the Kaiser, the Touch Pro is much sexier, nice to hold and show. The usability is pretty good after you update and tweak it. I can only see things improving with updates. And as for worth the money, Vodafone do the phone free with 600 mins & unlimited texts on a £35 contract..... great value to me.
Having never dared to change my device's rom for warranty reasons, and not having been able to do any official upgrade as my kaiser was an operator version ( SFR aka Vodafone ) I must say I am very satisfied with my touch Pro. I find it superior to the Kaiser in EVERY aspect comparing two official roms : so much better battery life, much better performance even if the resolution is much better, instant landscape to portrait switching...
The GPS is said to be worst (but I didn't ever manage to make it work correctly on the Kaiser anyways).
There are some small issues compared to the Kaiser :
- the softkeys are missing (right and left keys above internet and mail keys on the kaiser - an issue for some games but in fact it was a windows mobile 5 phone edition standard and has been deprecated, so recent software work perfectly without these)
- no scrollweel on the left side and that's a real loss. The central button can be used as a "virtual scrollweel" as it is touch sensitive but it only works with opera and is not very comfortable to use. However some third party utilies can map the volume slider, not very useful in my opinion, to up and down keys.
- The four front pannel keys and directionnal keys are physical but behind the same big plastic cover, which means the whole bottom half cover of the phone presses on a button. This means the directional keys, wich are in the center of this plastic cover are nearly useless...
Reminds me of some Apple mice...
BUT
- Touchflo 3D is an extremely good addition, eye candy and actually really useful (the preview of the mails for example is really excellent). A lot of great software additions compared to Kaiser.
- Having an FM radio too is a nice feature...
- Everything looks so much better in VGA... Even QVGA apps (games) are filtered so that you don't see big ugly pixels. And it's not just a question of look. Excel can actually be used with this resolution, and web browsing - with opera - is actually possible. On the kaiser it isn't, not just for a question of software or speed...
- The new keyboard is WAY better, specially if you need to type special caracters like in french.
- I had a Fujitsu Siemens Pocket Look 720 before buying the Kaiser, the idea being not to have a phone and an organizer in my pockets all of the time, but I was disgusted with this phone which wasn't up to my expectations, inferior in many aspects to my FS pocket PC, I found it ugly, slow, too much power consuming, with a horrible screen, and of bad material quality: one of the small plastic clips of the battery panel got quickly broken... Not to mention those missing hardware drivers.
I thought I would never buy an HTC ever again.
But I did, and now I can get rid of my Fujitsu Siemens pocket pc which was so good but is now in every way inferior to my new phone (well apart from the big screen - but that's not good for a phone - and the 3.5 jack)
pfcsabre said:
Not for the average joe I guess lots of eye-candy goodness for VGA, but still slow imo when using touchflo3d. Still need to get used to TomTom in VGA.. it's renders the streets really small compared to my tytn II before!
Click to expand...
Click to collapse
Tomtom already has software specifically made for the VGA/touchpro screens in beta, will be released sometime in November according to them.
Tomtom Navigator 7 posted here actually leaked (extracted) from HTC Diamond since Jun 20, 08. The newer version 7.451.9033 (VGA and QVGA) is available also.
Yup its like a Kaiser with everything fixed, looks better and is more usable in daily use. Very happy with mine.

HTC Touch Pro or HTC Touch HD?

Hi guys,
I'm trying to pick between the two. The main problem I'm having is whether I'll miss having a physical keyboard. As I wont be able to have a play with either of these phones before I make a purchase I want to be completely sure that I'm picking the phone I'm going to prefer.
So whats your opinion? Is the HD's keyboard suitable for you?
Do you miss playing silly small games on your HD? How are games on the Pro?
Also another important thing for me is the performance, I heard the Diamond can be quite laggy (With the Touchflow, which I plan on turning off anyway) but I would still like to know if the Pro is just as bad as the Diamond, and whether the HD is a significant improvement!
Cheers,
Luke
diamond rocks
There is a small lag , BUt it again depends on wether the ROM is a light one or a packed one . There are many out here , lighter ones ..for eg V7 , and there is one other fact about these phones , that if you do have a lot of calender enteries and contacts ...it lags a little ...
Calender entries aren't a big deal, don't tend to take full advantage of the calender. Though I do have 60+ contacts.
Have Diamond and I like it but wish I'd waited for the HD. I don't miss the keyboard from the hermes much as I expected.
Keyboard
I'm using a Herald. During some days I used the Diamond keyboard SIP, but after a hard-reset I did not install it again.
I'm using the physical keyboard when sitting or stopping in a comfortable place (office, train, restaurant) and I must work a lot (i.e. writing some project memories or preparing some lectures); on other cases, I usually try to use the stylus. When at building, I fear about missing the stylus (or maybe missing myself) in some concrete reservoir or some hole, so I liked to use the Diamond keyboard SIP, to write some small notes. So, my experience is I use keyboard about 30% of my time.
Looking the HD and the Pro specifications, I suppose they don't defer more than in design and small details.
If you need to work as "at home", I suggest you to get the device with built-in keyboard.
Thanks for the replys guys.
As I do a fair amount of blogging and web browsing I have been thinking that the Pro might be best suited for me, but on the other hand I do use remote desktop a lot (From work to my home PC) so being able to use remote desktop "On-the-go" would be rather handy especially on the large screen of the HD.
Another question I have is how often do you Pro and Diamond users make use of the D-pad? It doesn't seem like it would have very much use on a touch screen WM device.
D-Pad? Hardly ever.

What is The Big Deal with WM6.5 ?

I have recently seen alot of ROMS for WM6.5 and they all look the same from the screenshots.... ugly!
I mean what is with all the HUGE text listed down the screen, am I the only one who thinks this is a stupid setup? What happened to the Start Menu and clean today setup?
Are people just updating to WM6.5 just 'cos its 6.5, or do you actually like the look of it? Please give your opinions on WM6.5, and more importantly what is the difference between WM6?
I am using WM6.1 on 2 of my devices as I like the Today Screen feel and the way everything is set out. I am contemplating putting 6.5 on a device just to test it out, is it really worth it? is it customizable to make the home screen not just BIG words down the screen? maybe a clock even lol.
thanks everyone for your opinions.
i think it looks great.
As long as you have good apps installed to cover nasty WM UI no matter if you have 6.1 or 6.5
I personally do not like the honeycomb, but I do like that the hole UI is more finger friendly
Let´s see the WM7!! hope they really impress us
I like it because its 6.5 that .4 of more awesome 1337ness!!!! lol.. I actually just like the better slightly larger menu buttons. the new start menu is neither here nor there for me.. I don't like titanium, it has potential, but till you can have more than one link on click per panel it is pretty lame to me.. seems to take more effort to get to my necessary apps with it than without it.. I have been using wad2 on my last few flashes. My device is i910 Omnia, with the BlazingWolf 7.1 rom.
On my observation, the main advantages of WM6.5 over WM6.1 are:
RAM Managemenet: In WM6.5 I never need to run the apps to clear RAM. Any time I quit a program, the RAM will be released imediately.
Power Consumption Controll: The battery life is noticably enlonged copare using WM6.1, on same load.
Connectivity: One example is on WM6.1 any time I'm using Internet Sharing I need to manually switch phone band to WCDMA to ensure stable fast data connection. And if I forget to switch it back to GSM or Auto after finished the Internet Sharing, phone calls on 3G mode will drain the battery very fast. But on WM6.5, I noticed that I don't need to switch phone band again, just leave it as Auto. The OS is so smart that it knows what time to switch to what band. Example, when I use internet sharing, it will stay at 3G for most of the time. When I make or receive a phone call, it will switch to GSM immediately after the phone connected.
Finger Touch Experience For this I don't explain more, it's just much more comfortable on finger/stylus responds.
Third Party Apps Interface: Well I'm not a developer, but from the changes on some registry structure, I can definitely tell that WM65 will be more friendly to third party application developers.
These are very core elements of a mobile os. The progress of wm65 on these points is obviously noticable.
But because the change of the core. It causes a big problem on legacy apps compatibility. People find that a lot of apps running well on wm6 just can never run on wm65.
But I think currently both Microsoft and third party software vendors are working tight on this issue. At least for most part of popular softwares, we can find a wm65 compatible version now. But for some speciall software, we can not find it if the developer did not upgrade it.
For sure, there are certain advantages of using 6.5 over 6.1. (The advantage is not only 'skin' things that you can see it, more important is on the 'core'.)
Hence your choice just depend on what softwares you're using. If for all your 'must-have' softwares you can find a WM6.5 compatible version or its replacement, why not use WM6.5.
Edit: I don't like the Titanium & the headache to customize it either. I just disabled it & leave an 'empty today', but with HButton, I can reach all frequently used apps within one single touch.
The RAM used by Titanium is 3.5MB+, compares to HTC Home @1.5MB+, & M2D @ 7MB+.
I like the looking of Honeucomb,(for showup only), but I also use QuickMenu, which is more functional.
Must to say that above experience are from the single ROM I've used only, maybe there are performance variaties on different ROMs & devices.
And at last, one of my most favarite part is the new PIE, it definitely can display whatever a desktop ie does except only one tab allowed.
I like 6.5. I find it runs pretty well on the kaiser, and I prefer its look to the old Windows 3.x interface found in the older versions. Plus, the finger scrolling is superb. And if you don't like the honeycomb, there are other start menu layouts, one example here. WM6.5 is just a band-aid to hold us over until WM7, but it's still a step in the right direction for Microsoft.
Dave
Yes, I think i will be waiting for wm7, but i just can't help myself any longer and I am going to take the plunge to wm6.5 on my Elfin or Wizard just to give it a go, I think it should run well on the elin with the RAM it has and without really checking out the custmizations, my assumptions is basically on the interface on standard screenshots i have seen.
thanks for the input guys, only a flash will i be able to add further opinions, as i am a heaver modder, and would need this to offer proper insight into the OS.
I've bounced back and forth between a couple 6.1 and 6.5 ROMs. I use TouchFLo because I hate 6.1's today screen and Titanium is pretty bland. I think that the current touchflo manila 2.1 is about the best you can get for WM6.1 currently, but I don't think manila 2.1 is streamlined for WM6.5. I feel like I'm taking a step back in integration and fluidness when I use Touchflo 2.1 and WM6.5. Not much, but it just seems off. This leads me to think that the new manila 2.5 is HTC's update to bring that integration and fluidness to WM6.5. The specualtion is that manila 2.5 is going to be for the new Firestone. While that is probably true, HTC has also mentioned that the new Topaz and Rhodium will get WM 6.5 upgrades. I would like to assume that this upgrade will also include manila 2.5 because if I feel that WM6.5 and TouchFlo 2.1 is lacking a complete feel then I would take that HTC has also noticed this. Yeah, I'm rambling I know. Just my thoughts. Bottom line on WM6.5 is that it seems like Microsoft just made a piss poor attempt at skinning there relic OS. That just pertains to the aesthetics though. I know there were unseen changes that do have their benefits.
(Sorry for all the "I feel and I would assumes", just ponderings)

Categories

Resources