Database Info

Ive installed the wrong ROM, HELP !!!!!

I have installed the wizard ROM on my SPV m600. No excuses, I got the files mixed up and didn't check before I installed. The only way I can get anything to happen is to plug into the mains then I can get into the 3 color screen by holding camera for 5-7 seconds. If plugged into the PC the screen just flashes.
I know its a long shot but is my phone really dead ?????
Any suggestions really appreciated.

If you get those EXE ROM upgrade files from the xda-dev ftp, you ought to able to flash your phone from the 3 colour screen even if activesync is not working. I'm not sure about prophet, but you can try those EXE ROM upgrades files that has something like `no-ID` tag on their name.

Thanks for your advice but I cant plug it into the pc to do anything. It just flashes ? Also, I'm new to this site. Could you tell me what they are and how to get the EXE ROM upgrade files please.
After reading through a fem posts, there seems to be a way of accessing through a terminal program "mtty.exe" have you heard of this ?
Thanks

Do u get USB connectivity, if not then try SD Backup while plugging in main.

No USB connection at all, however, wescomm.exe does start. Ative sync dose not do anything. I will try the SD Backup method and post the result here after work.
Thanks

pgantley said:
No USB connection at all, however, wescomm.exe does start. Ative sync dose not do anything. I will try the SD Backup method and post the result here after work.
Thanks
Click to expand...
Click to collapse
Did U get any success??

None :-( It's stuffed, I have tried everything now. If only there was a way to read from the sd card while plugged into the wall socket. I had the idea of building a cable that splits. One end is plugged into the mains, then split the cable and run a standard usb cable into it from the PC ???? Just an idea. I have tried using an Ipod wall charger with USB slot (the same output) and an external hard drive caddy cable with two USB's one into the Ipod charger and one into the PC, then the other end into the PDA. It just flashed as though it was just plugged into the PC with a data cable !!!!
Any other suggestions would be great. Its so depressingnot having my faithfull device, I even went out and bought a razr V3, while I wait to get it sorted. Deffo not the same........
I found a place in London that claims they can sort it for £29.00 plus postal & insurance costs. I'll check it out first, I have family in London who can verify the place. I suppose if they can sort it for that price, its worth posting details of the company.

pgantley said:
It just flashed as though it was just plugged into the PC with a data cable !!!!.
Click to expand...
Click to collapse
I meant, the screen just flashed on and off, not flashed as in ROm flash

I posted it to London. Will post what happens.

Does this place in london has a website so may check it?

Yep, its www.turnonyourmobile.com
They are unable to fix my phone, The ROM cant be accessed to be written to ? They have suggested I call orange and see if they can do anything.

Big Trouble with USB :(

...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection

did you try another computer? or the power adapter that plugs into the wall?

yes, of course!
pr0naLd said:
did you try another computer? or the power adapter that plugs into the wall?
Click to expand...
Click to collapse
...it's a good question: too many times it's a joke...but not now.
i've tried in 3 computers...and the response is the same: NO connection, no "usb error"...nothing...only power charging....
If I put (with camera button and softreset) in bootloader mode it's ok...
"bip" on computer and USB un the bottom of the tuchscreen.
I've upgraded anothet time to NBD 7.4 but...
NO CONNECTION

This doesnt really belong in the wm6 forum i think. but maybe you also got a bad activesync on the computer, just start everything fresh again

...usb activesync now works!
after 7 (seven) downgrade and upgrade wm6 -> wm5 -> xda6 -> wm5 -> xda6r2 -> wm5 & so on....
ACTIVESYNC NOW WORKS!!!!
(obviously SAME computer, same Activesync 4.5, same USB port/cable)
i don't know why....but...
I'm HAPPY
thanks to all!
tommaso
TauRho said:
...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection
Click to expand...
Click to collapse

I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly

tphan2k3 said:
I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly
Click to expand...
Click to collapse
Yeah I use Cisco VPN for my work, and it screws up ActiveSync at times. Sometimes allows my phone to connect with no problem, and othertimes won't allow activesync to see my phone. Usually turning off the enhanced check box in the USB to PC connections settings will get around it, but not always.

USB port not working
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
-------------------------
I-Mate K-JAM
IPL : 2.16.0001
SPL : 2.16.0001
GSM : 02.07.10
OS : 2.16.9.1
-------------------------

try this....
loverbadi said:
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
Click to expand...
Click to collapse
i don't know if this one is a real solution...but...try this (no risk):
- first of all: try to change usb cable (with an old cable my kjam cannot connect....)
- try to plug usb cable SLOOOOOWLY: i've found that my kjam "communicates better" with my old pc il cable is "half-connected" (not tottally plugged in....
and...i don't know if it's possible to upgrade rom without usb connection....i'm sorry
(and sorry form my real poor english)
tommy

Similar problem
This may possibly not be the solution but I had a similar problem. I have an O2 xda mini s and after several days searching I discovered the problem. I opened up the xda and discovered that where the mini usb was soldered to the board, one of the solder points had come loose. The usb was not loose enough to stop the xda charging. By pressing down on the loose solder point the xda immediately showed up and syncing with my pc. I have now resoldered the usb back down and it works fine.
I hope that this is not the problem as it is damned fiddly soldering it back in place.
Hope this helps

I solved my problem
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.

loverbadi said:
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.
Click to expand...
Click to collapse
Have you been using some kind of holder for your wizard on your car?
I have seen several USB connectors with a bad attachment to the PCB because it has been used with car Holders that had the USB fixed.

Possible Stupid Question. Lost USB connectivity.

Hi folks.
My Tornado (imate sp5) was flashed from factory WM5 to WM6 with VJ Grace 3.3, it worked just fine. One day I lost conenctivity via activesync over the usb cable. BT activesync still works fine. I had not done anything to the connecter port other than using USB cable to activesync occasionally, and to use the wall charger.
After 2 months of going like this, I decided to upgrade to a newer Nitrogen ROM, and I enter the bootloader mode by pressig the camera button and plugging in the usb cable. The three color screen comes just fine.
Now, when I attach the USB cable, I do not see the small writing "USB" at the lower left hand corner.
Also I cannot connect it with Terraterm pro or the RUU utility, says phone is not connected via the USB.
But my usb cable still charges the phone when connected to the PC, even though activesync doesnt do anything.
Is there anything I can do?
Can it be a hardware error? Or a registry change I might have done using smarttweaks (enable/disable charging over usb-- I dont remember). If so can it be restored or undone?
I tried hard resets (clear storage and leftsoftkey/rightsoftkey/powerbutton combinations), but still it doesnt recognise activesync.
My other windows mobile devices get connected to same pc activesync with no problem, using the same data cable. Heck I even repaired by reflashing a friend's Wizard using the same pc and cable last week.
Is it possible that my tornado's usb connector port might have gone poof (it still charges the phone), and is there any remedy to that?
Thanks for reading, and please help..
Regards,
Steve

I've got the same problem. I can't connect via AS:/

I had a similar problem once in a while when I upgraded my phone to WM6; it seemed almost random. One day, the phone wouldn't switch out of Vibrate mode, and ActiveSync wouldn't synch with the phone. The first time it happened, I had VJGrace's 3.3, and 3.4 had just come out, so I went ahead and flashed it. I didn't format binfs or anything (which, in my experience isn't necessary for a functioning OS flash, just a clean one) but it flashed a fresh WM6 on, and the problem went away.
Then, a couple weeks later, I had the same problem again. It was right around the time that VJ's 3.7 came out, so I flashed that (again without format binfs) and it fixed the problem again.
Then, a couple weeks later, I had the same problem yet again. This time, Nitro's Platinum Edition had just come out, so I flashed it. Haven't had the problem again.
Interesting note - since I got my Tornado, my first Smartphone, I have only ever done the format binfs once - the first time I flashed WM6. Haven't done it since. It's my opinion that format binfs gives you a CLEAN install of WinMobile, but is not strictly necessary.
So, to summarize: try direct-flashing a new WM6 install. Just plug in the USB cable - ignore ActiveSync when it fails to synchronize - and run the updater program. It'll take care of the rest, even if AS doesn't synch.

djsleepwalker:
If you lost USB connectivity, how did you flash your phone?
Should I read between the lines that the bootloader connected properly and that it was a WM6 driver problem?

Exitao said:
djsleepwalker:
If you lost USB connectivity, how did you flash your phone?
Should I read between the lines that the bootloader connected properly and that it was a WM6 driver problem?
Click to expand...
Click to collapse
To be totally honest, I'm not 100% certain. See, ActiveSync wouldn't SYNCH with the phone, but I could still "Explore" the phone. WM6 was active and working, and charged via USB cable, it just wouldn't synch.
So, after I connected the USB cable and ActiveSync popped up a message that said it couldn't synchronize with the phone, I just started up the ROMUpdateUtility program. It rebooted the phone into the bootloader for me.
I honestly never tried to start it back up in bootloader mode. The only reason I decided to just flash a new ROM was because I had already downloaded the ROM, but where I was at the time, I had no internet access (and therefore couldn't remember the steps before flashing the new ROM.) A friend of mine who has a Wizard (and who, I think, might be a member of this forum) suggested that I didn't *have* to format binfs to put an updated ROM on the phone, so I said screw it. I needed it out of Vibrate mode (my phone is my second alarm - my second line of defense against oversleeping) so I flashed the new ROM.
ninja edit: If ccpraveen is getting *nothing* when he connects the USB, then my suggestion probably won't help. But if Windows recognizes something being connected, and he can *explore* the phone, but ActiveSync just won't synchronize, then he's probably having the same problem I was. I can't tell for sure from reading his post.

Sweet...
Thanks for the comments, its all dejavu again
Djsleepwalker's comments did make me wonder, hey this is exactly my problem, except that mine doesnt connect in any manner.
Lots of similarities, problems started with VJ 3.3, on and off for a while with USB, then totally lost connection.
I am not concerned with formatting BINFS now, I somehow want to get the phone recognized.
Exitao has actually asked a VERY VALID query. It is indeed impossible to flash a phone without any USB connectivity (unless via an SD image or something). Djsleepwalker's issue was minimal, only that the PC was not showing up the activesync as connected, but indeed there WAS a connection, he could explore the phone from the pc etc, and I bet if he did go into the 3 color screen, he would have seen the "USB" on the left lower portion.
So, mine is just that. No connectivity. Nada. PC just sits dumb. Phone just gets charged, and finally into the fully charged green LED. Thats it.
Could there be something in VJ's ROM that is doing this?
I wonder, because a Wizard I once tried to repair would not let me flash upgrade either. I had to go back to a basic BUTTON ROM to get the upgrades running properly again. But there atleast I had connectivity then.
After I read DJ's comments, I tried running the RUU straight, without getting into the bootloader (for a change). Again its the same error 260. Here is a screenshot.
Anybody?
Regards
Steve

It seems, from the description, that the activesync profile became corrupt.
Deleting any device profiles from Activesync and connecting the phone as a new device might also solve the problem. However, it might be active synch on the phone that is the problem...
Anyone unsure how serious their problem is should just turn off the USB connect in activesync, start the phone into boot loader and do an "info 2" with terraterm pro.
If terraterm discovers the device, the USB is not the problem. It's activesynch.

Terraterm pro would not connect either.
I started the phone into bootloader by plugging in the usb while keeping the camera button pressed. Started the terraterm pro, selected Serial > USB, clicked Ok, Terraterm says ERROR, Cannot Open.
One minor thing, what do ppl normally see in their bootscreens? I see these lines, Tornado IPL 2.00 Tornado SPL 2.00.0000 and another line Tornado IU.
I dont remember seeing this third line saying Tornado IU before. Is it normal? It is in the middle zone( green coloured zone).
I believe my usb connector port might have a physical error. What else it could be. PC just will not detect ANY sort of USB connection.
Thanks again Exitao, I am stumped.
Regards
Steve

Have you tried any other USB ports on your computer? I know it's a longshot, but on my desktop PC one of the onboard USB ports just doesn't function at all. The other three do.
ninja edit: Maybe try it on another computer, too?

I tried on all four USB ports of my laptop, as well as on another Desktop PC I have.
Even without activesync installed, plugging in this should bring out a DING, saying something has been connected to the PC USB. (and asking for drivers, if Activesync was not installed. Here nothing happens, no DING). Remember, the same USB port is being used to sync my Wizard, Blackjack 2 and my old Himalaya even now.
Another possible reason, I was using a dumb chinese charger for charging the phone, after I lost the original one. Could that might have fried the usb pins?

ccpraveen said:
I tried on all four USB ports of my laptop, as well as on another Desktop PC I have.
Even without activesync installed, plugging in this should bring out a DING, saying something has been connected to the PC USB. (and asking for drivers, if Activesync was not installed. Here nothing happens, no DING). Remember, the same USB port is being used to sync my Wizard, Blackjack 2 and my old Himalaya even now.
Another possible reason, I was using a dumb chinese charger for charging the phone, after I lost the original one. Could that might have fried the usb pins?
Click to expand...
Click to collapse
Please excuse me if I'm stating the obvious, or if I'm a bit off, as I don't haven't used my Tornado in a bit (upgraded to Touch Cruise), but in the last ROM I used, NitroGen's latest WM6 version, there was an option in settings to disable usb connectivity and only allow USB charging. Perhaps VJ's ROM has the same option and you activated it. Have you already checked this?

Did you remeber to uncheck "Alllow USB connections" in activesync before you connected the boot-loaded phone?
This may be a hardware problem. Is it possible to use a can of compressed air to blow out any dust or debris from the USB socket on the phone?
Do you have WMStorage on your phone? If not, can you load it onto your storage card and install/run the app and see if the PC will recognise your device as a USB mass storage device?
I guess you also want to check the Device Manager in Windows and check for any exclamaition marks (!) or "bangs." Both with the phone disconnected and connected, and maybe even with wmstorage enabled. If it does show your phone in the device manager, delete or remove the device in the manager and reboot.
(To get to device manager, you can right click on "my computer" and select "properties", or press the Windows key and the Pause/Break key, or go to the control panel applet.)
BTW: is this XP?
If you are using Vista, try the following:
Step 1: Press Start
Step 2: Select settings
Step 3: Select (6) Connections
Step 4: Select (0) More
Step 5: Select (1) USB to PC
Changing the type of USB connection your device uses can help with problems
connecting ActiveSync.
Step 6: Disable the option - Enable advanced network functionality
Step 7: Press done 3 times
Step 8: Return to main screen.
Step 9: Uninstall unrecognized USB device in device manager (on PC)
Step 10: reboot Phone and reconnect
Click to expand...
Click to collapse
If XP, keep going...
You've stated that the PC is recognising your other devices. Isn't there a limit to the number of windows mobile devices you can sync or associate with one installation of activesync? Can you delete a device and try again?
Is USB charging enabled or disabled in your phone? Try toggling the setting to opposite whatever it is.
If you are using a firewall app, add these programs to your firewall's exemptions:
# Wcesmgr.exe
# Wcescomm.exe
# Rapimgr.exe
Or simply disable any firewalls, network traffic optimisers or possibly antivirus (some have network protections) app to test if that has an effect.

Ok guys..
I will try doing all these, step by step and lets see
And accept my sincere gratitude from my heart for detailing all these info for me, I am soo deeply moved
Sincerely
Steve

ccpraveen said:
Ok guys..
I will try doing all these, step by step and lets see
And accept my sincere gratitude from my heart for detailing all these info for me, I am soo deeply moved
Sincerely
Steve
Click to expand...
Click to collapse
No need for thanx. If I helped, just give Nitro a donation on my behalf.

Well guys, with deep regret, I must say, even after trying all that, the phone stays put. PC wont recognise it, neither as a phone nor as a mass storage device. The connector port must have gone kaput.
I kinda feel stupid, u know, with all the tweaks and hacks out there, what use it is, if the dumb thing wont be recognised? Hmm.. So much for the tornado, now stuck at VJ 3.3 (unless someone find a way to flash via an SD image or something).
Well, thanks guys, your support did make me feel better, in the WM world, all is not lost, as long as there are good souls like you, willing to help, live and let live.
Regards
Steve.
PS: If the phone was not recognised in the bootloader mode, (ie even before the operating system has kicked in), I guess there should not be any difference if activesync was installed or not; and if or not mass storage option is enabled or not, right? Well, correct me if I am wrong, I think so. Could be wrong.

This is probably a useless comment, but have you tried using bluetooth instead of usb to connect to your computer?

Have u tried to delete the network card from XP device manager ?
U can also disable advanced network functionnality from your smartphone in "settings" -> "connections" -> "USB to PC"
Good luck

Can You Tried Different Usb Cable :d

i have some problem, after flashing to WM6 activesync or WM5torage can't connect..i have HTC prophet too, and i use same usb cable & PC, my HTC Prophet still can connect via activesync or WM5torage
*please..please..help us

I UPGRADEd vjgace Build_5.2.1616.18120_____v3.7 three days before today i can't connect to usb i tried diffrent app(activesync,wm5storage,internetsharing) but i can't connect so i go to bootloder mode and checked devicemanager i found device so i flashed nitrogenius rom and now working usb. try upgrade other ROM ON BOOTLODER MODE.

PC's don't see my Fuze no more?

I haven't plugged my fuze into any PC's for a couple of months - last time I did it was with a Windows 7 machine and it worked fine....
Well - now I'm trying to get the thing to sync with an XP machine. When I plug it into the usb, I see the fuze is charging - but activesync never comes up and nothing on the pc indicates that is saw me do this.
I've tried with 3 different XP machines here today - and none of them realize I've plugged anything in when I connect my fuze?
Soo...must be something with my fuze? Anyone have any ideas?
Only thing I saw was in settings/connections/usb to pc
there is an option for "enable advanced network functionality" - which I have disabled.
FYI I'm running WM 6.5 on it....

All previous reports of this issue ended with bad USB port on Fuze but you may want to search and read a couple of the threads first.

Interesting.
I can't seem to find any of these treads - can you point me to any?
Seems rather odd that if the port was bad that the phone would still charge though....

Let me ask you this, you say that you changed your PC to USB settings to Enable Advanced network functionality, I thought this setting was in Active Sync. USB to PC setting should be to "enable faster data transmission". Have you played with both settings?
Here is one recent thread and I know I saw another that mentioned the device would charge but not sync.
Here are many more threads regarding AS issues.

Bruce Inman said:
Let me ask you this, you say that you changed your PC to USB settings to Enable Advanced network functionality, I thought this setting was in Active Sync. USB to PC setting should be to "enable faster data transmission". Have you played with both settings?
Click to expand...
Click to collapse
I'm using WM 6.5 - and there I see:
settings/connections/USBtoPC
..that brings up a window which has settings on the behavior of the device when you connect it to a pc via USB. The options are to a) ActiveSync or b) DiskDrive
If you select a) ActiveSync you can "enable advanced network functionality"
There is also an option at the bottom that will cause it to ask which connection type to use when you connect.
I've tried all possible combinations - my pc does nothing when I connect, but I *do* see the fuze charging...freakn strange!

Have you tried to connect through an emulator like MyMobiler?
Its most likely a driver issue on your phone.
Hate to say it but.....
If all else fails, Hard Reset, flash back to stock ROM (if you've flashed a cooked ROM) and this should restore the corrupt driver.

Bruce Inman said:
Have you tried to connect through an emulator like MyMobiler?
Its most likely a driver issue on your phone.
Hate to say it but.....
If all else fails, Hard Reset, flash back to stock ROM (if you've flashed a cooked ROM) and this should restore the corrupt driver.
Click to expand...
Click to collapse
MyMobiler uses activesync to connect so that won't really be of any help at this point...
I was considering doing a hard-reset - but MAN I have about 140 apps installed and configured so I really hate doing that. What would be nice is if I could just find the driver and try that.
So that I suppose is my next question - anyone got the driver? hahaha

I use Pocket Controller which can use an IP address instead, I assumed MyMoblier was similar.
Copy the enclosed .dll to your windows directory using something like total commander because it is a cooked in system file. It still may not allow it though.
You should also look into Sashimi restoral program, as it is not uncommon to have to hard reset occassionally.
Good luck!

Is a firewall blocking it?
Each time I want to sync my Fuze, I have to disable my firewall. For some reason, even when I open the correct ports, my Fuze will not sync to Windows Mobile Device Center on my Vista Ultimate (32-bit) laptop.
Once it connects, I can turn the firewall back on and everything works fine. New and changed items will continue to sync until the Fuze is disconnected from laptop.
You may have already checked this and/or things may be different with XP and AS, but since I didn't specifically see it in the post, I thought I would throw it out there.

Bad cable???
I decided to try a different mini-usb cable and it worked.
Here is what is strange though - the bad cable:
1. Still charges the phone when connected to a PC
2. Works fine with my external 500gig USB hard drive (which also is powered via the cable)
3. ...but no computers see the phone with this cable - or see it as a storage device.
Because of #1 and #2 above - I assumed the cable must be good. I had another cable so I figured I'd give it a shot - and sure enough with this cable it works with all the computers.
I guess there must be one bad pin or something with the cable - or something??? Guess it must use different ones than the external hard-drive apparently.
Oh well - at least it works and rather it be a $2 cable than my $200 phone...hahaha
Thanks everyone for the suggestions....

For what it's worth if anyone stumbles across this post in the future, I had a similar issue happen where it would bring up the usb menu on my fuze when you plug it in, but the computer wouldn't see it.
I had recently swapped the display/touchscreen, and it was one of the strips of metal ground/shielding tape inside the thing being mispositioned that did it.
Put it back together with everything in the right place and boom! works.
If you've taken the phone apart, those pieces of shielding tape are very important to get back exactly like they were, I've also seen lcd issues from it.

HD7 not connecting to pc

So I made the switch to android a few months ago and I gave away my HD7 to a family member. Low and behold it stops working a week later. Everything is fine and smooth on the HD7 except it won't connect to ANY pc or laptop. Tested with 3 versions of Zune as well as windows xp, vista, 7. Sometimes the phone takes about 5 minutes to boot up which is ridiculous. The HD7 is on a deepshining rom as well as interop–unlocked. Is there any way to fix this? Or does anyone know what's going on even?

Anybody?

Have you tried with another cable, avoiding USB hubs and adapters?
Also ensure that USB Video Out is not enabled on the phone.
You may wish to try reinstalling software too. I prefer Dynamics 2.

maya79 said:
Have you tried with another cable, avoiding USB hubs and adapters?
Also ensure that USB Video Out is not enabled on the phone.
You may wish to try reinstalling software too. I prefer Dynamics 2.
Click to expand...
Click to collapse
I've used every single usb port. My phone just comes up as "unknown device" In device manager. Also my phone doesn't come with that feature.

In device manager...
in the "unknown device" double clic it
go to details
look for this...
VID_0000&PID_0000
the phone is screwed (but the board can be replaced)
just search "HTC HD7 Logic Board"
it must have numbers like this:
USB\VID_045E&PID_04EC&MI_00 (this is an HD7S)

faustolg said:
in the "unknown device" double clic it
go to details
look for this...
VID_0000&PID_0000
the phone is screwed (but the board can be replaced)
just search "HTC HD7 Logic Board"
it must have numbers like this:
USB\VID_045E&PID_04EC&MI_00 (this is an HD7S)
Click to expand...
Click to collapse
Is this something that just happens? Damn, I have the worst luck.