Related
i've been trying to update my tilt's rom and I don't know what im doin wrong. i've tried flashing mbarvian's solace v 1.5 rom and revrom v8 (sorry I can't remember who cooked the rom) and neither is working.
i've followed every step in the sticky for noobs like me. but when I get to step 3, which is flashing hardspl, I get lost. I moved the jumpspl files to my phone and ran jumpspl 1.93, since 1.53 seems to do nothing. it goes into bootloader, I disconnect usb, reconnect it, and try to run kaisercustomruu so I can flash hardspl 3.29. but when I try to run kaisercustomruu it just shuts down my computer. I don't know whts going on. it seems like im the only one running into this problem. i've spent the past 3 days searching the forums for a solution or reason why kaisercustomruu shuts down my comp and I can't find anything.
when I downloaded mbarvians solace rom there was another update utility that was included in the fil so I ran that. it worked, I clicked all necessary boxes, and the update initialized. but it just stays at 0 percent, and eventually gives me error 262 "update utility error" or something like that.
I tried restarting my comp and even hard reset my device. nothing is working.
im currently running the HTC windows 6.1 rom (the one straight off the site) and have hardspl 3.56.
the reason im trying to go to hardspl 3.29 is because mbarvian and the majority of people on his thread that had succes with his rom are running 3.29.
PLEASE HELP!!!
Well, you can't flash custom ROM's till you HardSPL your Tilt/Kaiser.
I noticed you didn't mention anything about disableling USB Connections in ACtive Sync/WMDC. Did you do that?
Also, kaisercustomruu is generic. Try copying the one from the ROM dl into the HardSPL dl folder. Another suggestion is do a search for flashing hardspl from sd card.
Why not use the sticky and then ask in the relevant thread? "The Sticky"
Flashing Your First Kaiser Rom (For Noobs) Read, Read & Read again, take in small steps & follow the directions to a T
stylez said:
Why not use the sticky and then ask in the relevant thread? "The Sticky"
Flashing Your First Kaiser Rom (For Noobs) Read, Read & Read again, take in small steps & follow the directions to a T
Click to expand...
Click to collapse
You will definitely get more help in that thread. But you already have hardspl, so read the part about flashing cmonex's 3.29 from your SD card, that looks like that will solve your problems.
denco7 said:
You will definitely get more help in that thread. But you already have hardspl, so read the part about flashing cmonex's 3.29 from your SD card, that looks like that will solve your problems.
Click to expand...
Click to collapse
I was going to agree with this, but then I read the flashing guide, and it says flashing from the SD card only works if you're upgrading. From the sounds of it, he doesn't have HardSPL on his phone, otherwise the cooked ROMs would flash.
To the OP, I would try another KaiserCustomRUU.exe. Just copy it from one of the custom ROMs you've downloaded and paste it into the folder you have HardSPL in. Be sure to delete the one that came with HardSPL first. If that doesn't work, maybe you could try a different computer? I don't think you need an ActiveSync connection to flash since JumpSPL puts the phone into flash mode. (Someone correct me on this if I'm wrong.) Just download HardSPL, extract, run JumpSPL, plug your phone in, and run KaiserCustomRUU.exe. It should flash!
I do have hardspl installed its v3.56. I just wanna try 3.29 cos mbarvian and the people on his rom thread that had success with his rom have 3.29 installed.
I read the flashing for noobs sticky and i've been following it verbatim. when I went to try and format my SD card to fat32 it wouldn't let me. I used resco explorer and when I tried to format it it said it wasn't unlocked. that's one thing I failed to ask about in my original post: how do I unlock the SD card?
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
poppinpengawen said:
how do I unlock the SD card?
Click to expand...
Click to collapse
Take your microsd card and place it into the converter (normal sized sd card). There is a switch on the side. Place the switch in the opposite position of "lock"
poppinpengawen said:
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
Click to expand...
Click to collapse
It sounds like you do not have kaisercustomruu in a folder, which contains .nbh file. Rather you are probably attempting to run it from your desktop???
poppinpengawen said:
I do have hardspl installed its v3.56. I just wanna try 3.29 cos mbarvian and the people on his rom thread that had success with his rom have 3.29 installed.
I read the flashing for noobs sticky and i've been following it verbatim. when I went to try and format my SD card to fat32 it wouldn't let me. I used resco explorer and when I tried to format it it said it wasn't unlocked. that's one thing I failed to ask about in my original post: how do I unlock the SD card?
I used 2 other kaisercustomruu's from other roms and they all forced my comp to shut down. I even ran it on my gf's comp and it shut hers down too.
help!
Click to expand...
Click to collapse
Ah, you have to use a SD Card reader on a PC to format it, not through the phone.
each time I ran kaisercustomruu it was in a folder with an nbh file. does it have to be by itself with the nbh file? just kaisercustomruu and the rom file?
oh that's all I have to do? just put it in the SD adapter and flip the switch? does it have to be in a computer for it to work?
poppinpengawen said:
each time I ran kaisercustomruu it was in a folder with an nbh file. does it have to be by itself with the nbh file? just kaisercustomruu and the rom file?
oh that's all I have to do? just put it in the SD adapter and flip the switch? does it have to be in a computer for it to work?
Click to expand...
Click to collapse
No.... there is nothing wrong with your SD card.
Do this:
1. Remove your SD card and your SIM Card. Start your device.
2. Connect your Device to your PC Via ActiveSync. Make sure you are fully connected.
3. Unzip and copy the exe file of attached JumpSPL to your device memory.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync icon on the PC tray, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe of the desired HardSPL and flash HardSPL3.29
To see if you have successfully flashed the 3.29 HardSPL press the camera and power button and press the soft reset once all at the same time, you will see the four color screen and it should display the SPL version.
Whether your SD card is locked or unlocked has no barrier on flashing SPL on your device, since you need to have it out of the device when you perform the SPL install.
Fat32 sometimes would not allow operation of certain files on your PC. thats why sometimes PPC programs or files would not open on your PC and would give you error msgs. Now some folks tried to create a virtual fat32 folder that could in some instances open or run fat32 programs that are created for mobile devices, but in most cases that would crash your PC OS and shuts it down. Same story with netCF files.
So in essence if you were to follow my instructions above, you will get it done and it should not take longer that two minutes to complete the process.
Again.... DO NOT SHORTCUT THE INSTRUCTIONS.
Good luck
asfoor said:
No.... there is nothing wrong with your SD card.
Do this:
1. Remove your SD card and your SIM Card. Start your device.
2. Connect your Device to your PC Via ActiveSync. Make sure you are fully connected.
3. Unzip and copy the exe file of attached JumpSPL to your device memory.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync icon on the PC tray, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe of the desired HardSPL and flash HardSPL3.29
To see if you have successfully flashed the 3.29 HardSPL press the camera and power button and press the soft reset once all at the same time, you will see the four color screen and it should display the SPL version.
Click to expand...
Click to collapse
I did do all that. like I said I followed the instructions to a tee, but when I ran the kaisercustomruu that was included with the hardspl file my comp just shut down.
question: if I run jumpspl and then use the htc update utility to flash hardspl, would that work? (the htc update utility is the update utility that worked when I tried to flash the rom but it just sat at 0%)
asfoor said:
Whether your SD card is locked or unlocked has no barrier on flashing SPL on your device, since you need to have it out of the device when you perform the SPL install.
Fat32 sometimes would not allow operation of certain files on your PC. thats why sometimes PPC programs or files would not open on your PC and would give you error msgs. Now some folks tried to create a virtual fat32 folder that could in some instances open or run fat32 programs that are created for mobile devices, but in most cases that would crash your PC OS and shuts it down. Same story with netCF files.
So in essence if you were to follow my instructions above, you will get it done and it should not take longer that two minutes to complete the process.
Again.... DO NOT SHORTCUT THE INSTRUCTIONS.
Good luck
Click to expand...
Click to collapse
but in the sticky it says that in order to change to cmonex's 3.29 i'd have to flash via SD card. that's why I was wondering how to format it to fat32. but i'll try to do it again and see if it works this time. thanks for the files
my sandisk 8g micro sdhc won't let me delete files, ad files, or even reformat the card
poppinpengawen said:
but in the sticky it says that in order to change to cmonex's 3.29 i'd have to flash via SD card. that's why I was wondering how to format it to fat32. but i'll try to do it again and see if it works this time. thanks for the files
Click to expand...
Click to collapse
can't you read? Why are you doing Cmonex? JUST FOLLOW MY INSTRUCTIONS. hardSPL3.29 is same protocol on both CMONEX and POF and whoever tells otherwise is full of BS. Again.... just follow my instructions..
msd24200 said:
my sandisk 8g micro sdhc won't let me delete files, ad files, or even reformat the card
Click to expand...
Click to collapse
Are you trying to add files to your card by inserting it into your laptop using an adapter?
BTW certain adapters for some reason or another will not allow you to do that after the SD card has been placed and used in a phone.
Can you access the SD card through ActiveSync? If you have installed programs on your SD card and you are trying to delete them from the SD card it would not let you as there is a shared violation in that process. The way to do is that you would need to remove the programs first from your device by using the Remove prompt in your settings page on your phone, then going to your SD card and deleting the program files. If you do it in the reverse order you will run into problems; Remnants of those programs will still reside in your main memory.
The attached is a utility that would help format SD card. DO NOT UNZIP IT. Just create a folder on your PC and save the attached in it, When done, change the file type of the attached file from zip to exe. Then right hand click it and do the extract to the folder you created. Follow the included instructions to format the SD card.
poppinpengawen said:
I did do all that. like I said I followed the instructions to a tee, but when I ran the kaisercustomruu that was included with the hardspl file my comp just shut down.
question: if I run jumpspl and then use the htc update utility to flash hardspl, would that work? (the htc update utility is the update utility that worked when I tried to flash the rom but it just sat at 0%)
Click to expand...
Click to collapse
Wait a second..... Do you have your device CID unlocked? In other words, did you unlock your device using one of the methods in the stickies? I am NOt talking about SPL .... Were you able to flash a cooked ROM on your device?
asfoor said:
Are you trying to add files to your card by inserting it into your laptop using an adapter?
BTW certain adapters for some reason or another will not allow you to do that after the SD card has been placed and used in a phone.
Can you access the SD card through ActiveSync? If you have installed programs on your SD card and you are trying to delete them from the SD card it would not let you as there is a shared violation in that process. The way to do is that you would need to remove the programs first from your device by using the Remove prompt in your settings page on your phone, then going to your SD card and deleting the program files. If you do it in the reverse order you will run into problems; Remnants of those programs will still reside in your main memory.
The attached is a utility that would help format SD card. DO NOT UNZIP IT. Just create a folder on your PC and save the attached in it, When done, change the file type of the attached file from zip to exe. Then right hand click it and do the extract to the folder you created. Follow the included instructions to format the SD card.
Click to expand...
Click to collapse
yeah i've tried adding/deleting pics, vids, music, etc... with phone and pc and neither works, up until a couple weeks ago i was moving pics/vids to and from the card with the ppc and the pc with no problems. i have used several different card adapters in case one was bad but no matter what i have done, nothing has worked. i already even tried the file you sent and couldn't get the sdformatter to work either. i haven't installed any aps to the card only save pics and all on there, keep my fav program cabs on there as well.
msd24200 said:
yeah i've tried adding/deleting pics, vids, music, etc... with phone and pc and neither works, up until a couple weeks ago i was moving pics/vids to and from the card with the ppc and the pc with no problems. i have used several different card adapters in case one was bad but no matter what i have done, nothing has worked. i already even tried the file you sent and couldn't get the sdformatter to work either. i haven't installed any aps to the card only save pics and all on there, keep my fav program cabs on there as well.
Click to expand...
Click to collapse
Sounds to me your 8GB SDHC Card failed if it worked before and isn't anymore. Can you play the music on the card from either your PC or Kaiser?
going crazy
so i've been following asfoor's advice. I ran kaiserunlocker, but none of the steps made any progress. I tried using it to flash spl3.29, but my spl still shows 3.56. I tried flashing the patched radio, but its still the same (1.65.21.18). I downloaded v2.0, so I know I have the most recent version of kaiserunlocker. help! im getting more and more frustrated.
I have windows7 on my pc, and when i try to install Rom it just says img not found... Same if i just copy it onto the sd(via usb transfer if it matters)
super2 said:
I have windows7 on my pc, and when i try to install Rom it just says img not found... Same if i just copy it onto the sd(via usb transfer if it matters)
Click to expand...
Click to collapse
If you could give more information about the complete process that you have done, it would be easier for someone to help you.
For example, what is the name of the ROM?
How are you decompressing it?
Are you trying to flash via WMDC or SD Card?
I am also running Windows 7 on my computer and have no trouble at all.
I think it may be something to do with the process you are doing.
Let us know what it is. I'm sure we'll be able to help in some way.
For example, what is the name of the ROM?
How are you decompressing it?
Are you trying to flash via WMDC or SD Card?
It is http_://forum.xda-developers.com/showthread.php?t=536751 this one and i already have installed max sense on the phone, and what to change it tolower ram usage and etc... Tried titantium and sense 2.1 no success. I tried via the usb connection. but cannot locate a device, after it is being rebooted. And then i tried to transfer the divimg.nbh to the sd card and reboot, no success - no image found.
one thing is clear: if you try to install the rom from sd card, your Rom name ("divimg....") is wrong. It should be something like "raphimg.nbh".
How do you establish connection between PC and your TP? There are reported some difficulties connecting your TP with the PC via Windows 7 using device center. Using the search may help...
good luck
Please post [Q] in general section.
borisku said:
one thing is clear: if you try to install the rom from sd card, your Rom name ("divimg....") is wrong. It should be something like "raphimg.nbh".
How do you establish connection between PC and your TP? There are reported some difficulties connecting your TP with the PC via Windows 7 using device center. Using the search may help...
good luck
Click to expand...
Click to collapse
I see, that should be the problem, thank you. Yes i am using the device center.
Divimg.nbh? Where'd you come up with that, lol?
It needs to be named RAPHIMG.nbh. Make sure the extension is correct, and you don't have RAPHIMG.nbh.nbh, or something like that. And the card has to be formatted to FAT32, and the image must be on the root of the card. That's all there is to it. You also need to have hard spl.
It worked just with the normal file.
same problem
Hi there...
I try to flash the new rom on my TP, and:
1) HardSPL is done, I flash one time a month ..
2) via SD card is written: Image not found - card has been formatted to FAT32, name of the image IS RAPHIMG.nbh.
3) via USB installation goes to the installation screen where "Image not found" is written also ... Active sync has been made, I've checked, that "USB support" is OK.
I have placed ROM and the *.exe file into one folder ..
Can anyone help me?
EDIT: Win XP Prof. 32BIT, Touch Pro and the ROM is ENERGY 23699 Sencity/Touch of Glass - tried both of them.
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Look for drivers only maybe different bit than your pc
Try just the sd.card in your.computer
Usb.debuging
Sent from my SGH-T959V using XDA Premium App
patpat09 said:
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Did you install the drivers found on the "how to root galaxy s4g and deleting fota files" thread in the development forum?
Sent from my SGH-T959V using Tapatalk
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
This happened to me also, with a kodak cable.
Sent from my SGH-T959V using Tapatalk
golmar88 said:
One thing you might try, if you haven't yet is a different (original) usb cable. I had this problem and realized I was using a moto usb cable. Just a thought.
Click to expand...
Click to collapse
+2 I had this issue before.
Thankyou for all the answers, I've used 3 different drivers, 1 from Kies, 1 from that Noob root guide, and one from somewhere i forgot.
I also used 3 different micro usb cable, HTC, MOTO, and samsung.
I went to Tmobile, plug in one of their sgs4g in my laptop, works perfectly, so not my laptop and not my cable.
Then i tested, my phone is not rooted yet with root checker, when I install superuser, it gave me an error msg saying that su binary file has a problem, It disappear before i write it down. and it said it copied that su binary on my sd card and tell me to reboot into recovery mode and install it.
I dont know how, and i guess that means a hard reset? I used that vol up+down and power buttom.Then I clicked reinstall packages, big discovery!
I found out that "E;/fail to open.mnt/internal_d/update.zip(No such file or direstory)
Man.... somehow that update.zip isn't there!!!
Anyone could point me to a place to download it? or simple upload me or send one to me email [email protected]
Again thank you for all the comments!
patpat09 said:
Update:
Stock update.zip needed!!
or, does those mod update.zip helps too ?
I've had trouble connecting this SGS4G to my PC.
I got it used, the previous owner fomated the SD card.
Is there any files comes with the stock SD card that affects the connection?
I tried hard and soft reset, still the PC said can't recognize it.
I even hand pick the USB driver in update driver option.
It says "Device cannot start (code 10)" something like that
Any advise will be appreicated!
Click to expand...
Click to collapse
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
joedeveloper said:
Have you installed the driver's from Samsung yet?
Additionally, when you plug the USB cord in, what happens on your phone? Do icon's show up, up top? Nothing happens?
Have you tried to go into Settings>Applications>Development and made sure USB Debugging is on?
Now if you have tried a standard SGS4G from the TMO Store on your laptop and it worked, you might have gotten a bad deal buying that one used. Something might be jacked up on it.
Additionally, if it's unmodified which it sounds like it is,
Just go to Settings>Privacy>Factory Data Reset.
That will put you back to the original state.
Click to expand...
Click to collapse
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
patpat09 said:
No icon show up.
Something is missing from the phone, i did the factory reset both soft and reinstall package in Recovery/ delete all user data, still no help.
When i use root checker, it tells me there is no su binary in system/bin
Superuser created one for me to the SD card, but es file explorer wont copy it into system/bin for me, and in recovery mode, it just say no update.zip exist in internal SD
Click to expand...
Click to collapse
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
joedeveloper said:
I'm not sure what would have been deleted off the phone to prevent the USB from working on your computer. Either way, you're kinda out of luck if it won't even connect to the computer.
Only other solution would be to download the stock ROM in the form of update.zip from your phones web browser, save to SD, then reboot into recovery and choose the second option.
The reason why update.zip is missing is because you haven't put it on your SD card. You typically download any zipped ROM, rename it to update.zip and then put it in the root of your SD.
Since you can't connect to the computer you'd have to download from a browser.
Click to expand...
Click to collapse
Very usefull Info!!
I'm downloading that Stock DEODEXED KC1 now. But it's in Mc5
So, i just zip it right?
Luckily I could still take the sd card out and use a card reader to load stuff on it.
Mainly i want the connection to the pc for rooting.
Moreover, the Root checker says i already have Busybox installed, does it mean, the previous owner might have tried to or did rooted, but unroot it ?
That one doesnt work, so I tried another one which it states its completely stock (T959VUVKC1-REV00-ALL-low-CL933594.tar)
But still both turns out "E: signature verification failed"
any idea?
Okay well my screen and digitizer are broken. I'm pretty sure I left usb debugging mode always on. I tried downloading kies and plugging it in, but got a connection error saying that the device wasn't in kies mode so it couldn't recognize it.
Also, the internal sd is not visible from my computer, although the computer does play the sound recognizing it being plugged in and trying to download the drivers. Indicating that the sd isn't mounted for access through the computer.
So my problem is, how can I possibly get any internal sd data at this point? I was thinking maybe adb but I'm clueless as to how I would go about doing that. Not to mention, I'm not even sure if adb is the solution I'm looking for...if there is one. Would adb still work even since the computer isn't recognizing it in "my computer"?
My phone is rooted and running some old rom that I don't remember. I had clockwork and voodoo if that even matters.
I know sorry for being a noob. Any help is appreciated
sorry for the double post, but this is a large active forum. 200 views and no answers? I know somebody on here knows the answer to my problem. Tell me if I should post in a different section...
I'm recycling my phone and really want my data that's on the sd and then wipe it after.
Download drivers to Pc. Then see if it can connect. Also I assuming your phone uses Odin. Try putting phone in download mode
Sent from my SPH-D710 using xda premium
tonomon said:
sorry for the double post, but this is a large active forum. 200 views and no answers? I know somebody on here knows the answer to my problem. Tell me if I should post in a different section...
I'm recycling my phone and really want my data that's on the sd and then wipe it after.
Click to expand...
Click to collapse
You will have to try and get your PC to see your device. If you can't then you are out of luck. This is the big problem with only having internal storage and no SD card.
thanks for the replies. Okay so I have the drivers installed. I installed kies and tried connecting that way but it wouldn't connect saying that the phone wasn't in kies mode (and I have no way of doing that with the broken screen).
I tried setting up adb and droid explorer. Droid explorer said my phone had around 300kb of data on it. The sd card folder was a "link" with a small data size. None of the folders or files were found when clicked on in droid explorer.
Any options at this point?
tonomon said:
thanks for the replies. Okay so I have the drivers installed. I installed kies and tried connecting that way but it wouldn't connect saying that the phone wasn't in kies mode (and I have no way of doing that with the broken screen).
I tried setting up adb and droid explorer. Droid explorer said my phone had around 300kb of data on it. The sd card folder was a "link" with a small data size. None of the folders or files were found when clicked on in droid explorer.
Any options at this point?
Click to expand...
Click to collapse
Got the same problem as you did, just with a samsung galaxy s3, and I have tried all the things listed in this thread, with no luck. Did you find a solution to this?
Please help I am new to this stuff and yesterday I got my phone to cm 10.1 but I realized the .zip from the thread was wrong and now i have 4.2.1 running on my phone but 4.3 gapps and because of that my phones keyboard wont work. Also I cant flash new gapps because it doesn't let me install from my external sd and i haven't found a way to connect my phone to my computer.
Can someone please help me?
Tell me ways I can connect to my pc?
charminster said:
Please help I am new to this stuff and yesterday I got my phone to cm 10.1 but I realized the .zip from the thread was wrong and now i have 4.2.1 running on my phone but 4.3 gapps and because of that my phones keyboard wont work. Also I cant flash new gapps because it doesn't let me install from my external sd and i haven't found a way to connect my phone to my computer.
Can someone please help me?
Tell me ways I can connect to my pc?
Click to expand...
Click to collapse
You can't just... Plug it in to your PC? Don't you have a USB cable?
Connor Baker
No it doesn't connect to my computer. Even tried with other computers and wires
charminster said:
No it doesn't connect to my computer. Even tried with other computers and wires
Click to expand...
Click to collapse
If you cannot turn developer mode on and use ADB push, then, you should be able to in CWM.
Failing that, does Google Play work?
If so, install (from your PC via Google Play page) WiFi File Transfer Pro, fire up an FTP session and push the needed GApps over.
And if all else fails...
ODIN back to stock.
I really don't get it
Can you explain this in detail?
charminster said:
I really don't get it
Can you explain this in detail?
Click to expand...
Click to collapse
Sure thing.
ADB is the debug program for Android. You can use it specifically to push files to the device. But it is not turned on on the device by default. You will need to go into developer options under settings and turn USB debugging on (if Developer Options is not there, go into About Phone and tap Build Number 7 or 8 times tom unlock the feature).
For this to work, you will need a linux PC with an ADB binary (if using Debian/Ubuntu, can "apt-get install adb", then run adb as superuser or sudo) or a windows computer with adbsetup installed. The latter will install the program to C:\adb. So open a command prompt and (with the device plugged in and developer options turned on) type:
Code:
c:
cd \adb
adb devices
You should get a listing of your device, raring to go. If so, great! Copy the the appropriate Gapps package to C:\ADB and type:
Code:
adb push gapps-4.2.zip gapps-4.2.zip
...or whatever the filename is called (there twice as it needs the local and remote file name).
So if that works, can reboot into recovery (CWM) via the three finger salute (turn device off fully, wait a few seconds, hold down both volume buttons while pressing the power button), wipe dalvik cache, and flash the right GApps.
Another option is if you can add Google Play apps to your device. Don't imagine, but if it is possible, fire up your computer and log into your Google Play account. Search for "WiFi File Transfer Pro" and install. With a Wifi connection on the device, it should download and install. If it doesn't, try the scorched earth option below. If it does install, open Wifi File Transfer Pro, turn on FTP server, and keep note of the IP address and Port (Will be noted as IPort). Open or install an FTP client like FileZilla on your PC, and open a connection using that IP address and Port. Transfer the Gapps package over to the device, in the root folder. Then like above, reboot into recovery and wipe dalvik, flash gapps.
The last option, the scorched earth method, is to bring everything back to stock, mind you with root and CWM. Pick option D from the above link (previous post). Download and install adbsetup for the drivers. Option D download will come with a program called ODIN, and that link will have detailed instructions (download and extract the files, open ODIN, put the phone into download mode by turning the device off, hold down both volume buttons while inserting the MicroUSB cable, place the extracted files inthe right sections of ODIN, and flash away).
Hope this helps.
Ok one of my main problems is that I can't use keyboard...which means no internet because I can't type any passwords
And the other big thing is that none of my computers connect toy phone even with USB debugging on from setting and even in recovery
I was wondering if I get a connection with no password will I be update from the phone because there is an option to do so.
charminster said:
Ok one of my main problems is that I can't use keyboard...which means no internet because I can't type any passwords
And the other big thing is that none of my computers connect toy phone even with USB debugging on from setting and even in recovery
I was wondering if I get a connection with no password will I be update from the phone because there is an option to do so.
Click to expand...
Click to collapse
Because Google Play is part of Gapps, there is no guarantee that will work either to update. If you can find an unsecured network (or temporarily turn off WPA on your router), you can test this, but at this point, I would be doing the scorched earth method. You would only be going back to Gingerbread, and however you play your cards (whether you disable lagfix or flash ICS as an intermediary), you would only be one or two flashes away from a functional Jellybean.
Ok my phone doesnt connect with usb ive tried several different times.
I did the adb method everything was fine except i didnt get the device list ,it was empty.
So if it cant connect how will i connect it to my computer to use odin?
Ps. I did download the drivers
charminster said:
Ok my phone doesnt connect with usb ive tried several different times.
I did the adb method everything was fine except i didnt get the device list ,it was empty.
So if it cant connect how will i connect it to my computer to use odin?
Ps. I did download the drivers
Click to expand...
Click to collapse
True enough. Lets try this (as I just thought about it via some other weird, more convoluted way). CM 10.1 comes with a file manager right? Download the 4.2 Gapps onto your mcroSD card, insert it into your device. Fire up the file manager. Copy the Gapps file from the external SD card to the internal card, root folder (where the offending Gapps lies). Reboot into ClockworkMod and wipe Dalvik and install the appropriate zip.
If this does not work, my more convoluted way wouldn't either (search and download "wifi file transfer pro apk" to SD, open with file manager, install, follow the rest of above option 2), and would be out of options except getting your hardware fixed (as it sounds like your device not connecting via USB is a hardware issue).
Ive tried with micro sd before and it hasnt worked
The thing is that All of this stopped working after the update and the thing that i disliked the most was that when i was getting the update it said jb 4.2 gapps but proved wrong
:crying:
charminster said:
Ive tried with micro sd before and it hasnt worked
Click to expand...
Click to collapse
You tried mounting the microSD with the proper Gapps, and copying it with CM's File Manager (to the internal disk to be picked up by CWM later)? Just being clear, and making sure you are not talking about trying to install a zip directly from the MicroSD with CWM (as mentioned, and ruled out before). Because these are two completely different things. Is the MicroSD readable at all on your device? Is it formatted properly (FAT32, or even Ext2/3/4, but not NTFS)?
Can you explain the formatting stuff?
charminster said:
Can you explain the formatting stuff?
Click to expand...
Click to collapse
Sure. Insert the microSD into your computer, and open up Windows Explorer. There will be a new drive that appears. Right click on that removable drive, and select Properties. Confirm the File System. If it is FAT32, you are okay. If it is NTFS, or exFAT, you will need to format (as the Infuse will not recognize these formats). Press Cancel.
Before beginning, make a backup of the MicroSD card, as we are going to wipe and start from scratch. Then, right click on the removable drive again (and only this drive, or you will cause damage to your computer) and select Format. Change the file system to FAT32. If this is not an option, find and download a disk utility that will (I'm not familiar with them, but google "removable storage format fat32 download" for one). Press start, and wait a few minutes. When done, you can reload your files on the drive (restore your backup), and try inserting it in your Infuse again.
Hope this helps.
I followed all your steps bit the phone still doesnt read it i opened setting..storage..mount external sd
But it wasnt letting me and the same thing trying through recoveryCWM
charminster said:
I followed all your steps bit the phone still doesnt read it i opened setting..storage..mount external sd
But it wasnt letting me and the same thing trying through recoveryCWM
Click to expand...
Click to collapse
Probably not, IIRC external SD did not work in CWM for the Infuse. But re-read post #10, what I'm suggesting is getting CWM to read the proper Gapps from the internal card, but placing it there with CyanogenMod's file manager.
CM 10.1 comes with a file manager right? Download the 4.2 Gapps onto your mcroSD card, insert it into your device. Fire up the file manager. Copy the Gapps file from the external SD card to the internal card, root folder (where the offending Gapps lies). Reboot into ClockworkMod and wipe Dalvik and install the appropriate zip.
Click to expand...
Click to collapse
I cant get it there because i cant do anything with the sd card it doesnt show in file manager either
charminster said:
I cant get it there because i cant do anything with the sd card it doesnt show in file manager either
Click to expand...
Click to collapse
Sorry, I misread your previous post. Thanks for the clarification. What are the details on the microSD card? Make, model, speed, capacity? If it is a 64+ GB card, it would spell problems as the Infuse was never rated for a capacity that large.
It's a sandisk 16 gb
Sd card
Fat32
No reason why the microSD won't work in the Infuse.
If you have a Bluetooth keyboard you can borrow - or try buying (not sure if it will connect) - but if you can get your hands on one, you could use that (never had to use one so I don't know how they connect) to download the right GApps package to your phone (via the built-in browser).
I'm curious as well, if the speech-to-text works. You could use google now search to find the gapps package ("okay google, xda developers") and browse to the right page. Of course you will need a unsecured network to attempt.
Other than that, unfortunately I'm out of ideas.