Related
I'm sure this is a noob question, but I can't find the answer on the forum.
I've seen a couple people reference automatically ending the data connections when they're idle. Can someone explain how this is done?
Is the desire to disconnect the data to save on battery life? Just curious. Thanks.
That's the main reason I want to do it...not sure about others...
I figured out two ways to do this for anyone else that's interested.
1) Using Advanced Config Tool (V3.3): Menu > More Settings > Connections. Check "Disconnect After" and set the timeout you want. This seems to work well for activesync connections (my mail is set to recieve every 5 min), but doesn't always work for on demand connections (Internet).
2) Comm Manager Pro. No instructions for this since I'm not using it (yet). But everything I've read looks like it does it.
Like I mentioned, I've got my email configured to sync every 5 minutes and I have a connection timeout of 30 seconds set in Advanced Config. This setup has drastically improved my battery life. Before this change, I got maybe 12 hours on a good day. With this timeout set, I could probably get 2 solid days. The only thing I haven't figured out is if the timeout is and idle timeout or an overall timeout. What I mean, is will the connection end after 30 seconds even if it's in use?
I'm interested in this as well, it would be even better if outlook or msn live would make a connection and disconnect after synchronizing.
I've been looking for the same solution. So far using advanced config settings will force disconnect no matter if it was idle or not. I'm looking for a solution to disconnect only when idle.
As of proof, set auto disconnect to 1 minute and using latest skype v3.0 start transferring a large file. After 1 minute data connection will be forcibly disconnected.
Any solutions for this?
Thank you.
Can someone help me find the timing setting in Advanced Config? I've looked through everything - using Energy 3.0 Rom (WM6.5) and don't see anything related to data disconnect other than under "Data Connections:" "GPRS disconnect:" and my settings are "Enable button and timer"
I don't see where the timer comes into play; don't really care if the connection gets cut off - I'd rather see a battery life improvement.....
I'm an absolute idiot. I just skimmed through the thread and didn't read the post above... *smacks forehead*
Its been posted in this very topic, and its only 5 replies long
xawen said:
I figured out two ways to do this for anyone else that's interested.
1) Using Advanced Config Tool (V3.3): Menu > More Settings > Connections. Check "Disconnect After" and set the timeout you want. This seems to work well for activesync connections (my mail is set to recieve every 5 min), but doesn't always work for on demand connections (Internet).
2) Comm Manager Pro. No instructions for this since I'm not using it (yet). But everything I've read looks like it does it.
Like I mentioned, I've got my email configured to sync every 5 minutes and I have a connection timeout of 30 seconds set in Advanced Config. This setup has drastically improved my battery life. Before this change, I got maybe 12 hours on a good day. With this timeout set, I could probably get 2 solid days. The only thing I haven't figured out is if the timeout is and idle timeout or an overall timeout. What I mean, is will the connection end after 30 seconds even if it's in use?
Click to expand...
Click to collapse
In advanced config the settings you are looking are not located in the list on first screen, the are in separate menu as described above.
And now I'll quote myself so my question will not get burred:
[email protected] said:
I've been looking for the same solution. So far using advanced config settings will force disconnect no matter if it was idle or not. I'm looking for a solution to disconnect only when idle.
As of proof, set auto disconnect to 1 minute and using latest skype v3.0 start transferring a large file. After 1 minute data connection will be forcibly disconnected.
Any solutions for this?
Thank you.
Click to expand...
Click to collapse
guys, found this
http://www.andrewsayshello.com/windows-mobile/auto-disconnecting-idle-data-connections-in-wm6/
hope this helps in some way
Thanks for the link, unfortunately it still disconnects even if data connection is in use.
WMLongLife can do this for you.
About the registry tweak that does this, I must warn you: it disables the ability to do voice and data simultaneously.
Chainfire said:
WMLongLife can do this for you.
Click to expand...
Click to collapse
Just checked WMLongLife and it seems that program does not quiet work if one doesn't use opera or wifirouter...
Chainfire said:
About the registry tweak that does this, I must warn you: it disables the ability to do voice and data simultaneously.
Click to expand...
Click to collapse
This is new for me...I thought that data connection cannot co-exist with phone call, period..
[email protected] said:
Just checked WMLongLife and it seems that program does not quiet work if one doesn't use opera or wifirouter...
Click to expand...
Click to collapse
Yes it does require a certain way of using your phone (current test version has specific settings - you can change this in next version). Just saying.
This is new for me...I thought that data connection cannot co-exist with phone call, period..
Click to expand...
Click to collapse
Yes it can, but it depends on several factors. Under ideal (and never actually occuring) conditions it can be done with 2G GSM (GPRS/EDGE). Normally, however, either GPRS/EDGE connection suspends ('pauses') during voice call, or with 2G CDMA voice call may not work at all while data connection active (depends on exact 2G CDMA network type).
With 3G GSM (UMTS/HSPA) it is quite possible (and normal) to do data and voice simultaneously, however for some reason the auto data disconnect registry tweak breaks it. I'm not quite sure why, but it does.
3G CDMA (EV-DO) behaves the same as 2G GSM with regards to simultaneous voice and data (data drops), however, EV-DO Rev. A behaves the same as 3G GSM (possible but broken by registry tweak)
Aside from this, it is also needed that your provider/network has the correct hardware to handle this. I'm not sure how common it is for this properly operating on EV-DO Rev. A, but for UMTS/HSPA early tower equipment was bugged and did not allow this. In Europe, most UMTS/HSPA towers have since been upgraded to allow simultaneous voice and data (and HTC handsets support this perfectly), but how this is in the USA I cannot say.
Hope that explains it (it is a bit messy explenation I know)
if this dowsn't work then i have no ideea what will )
http://forum.xda-developers.com/showthread.php?t=484084
tell me if worked for you
!!!!!
I had it set to disconnect (via Diamond Tweak software) after 1 minute of activity. I did this to preserve battery life, BUT BUT BUT
With 3g on, and even with 3g disabled all day and edge on, the battery still died in 8, 12 hours (3g, edge) with the connection disabling. i use the phone for a good number of calls, text, and some data every day.
AFTER i reenabled it to NOT disconnect after every 1 minute, i pulled over 24 hours on a SINGLE charge.
am i the only one that's experienced this??
Has anyone heard or know of software that'll switch my WiFi on or off depeding upon where i am currently located using GPS? e.g. home or work? or wherever i've previously manually turned WiFi on and got a connection?
CMP
You should go for CMP - Commmanagerpro by Daniel Herrero
Its the most important program for a device running WM !!!
And I mean it.
Depending on cell towers and/or scheduled tasks it will change profiles, task and whatever you can think your device should do for you...
Exampel: My phones runs a close apps at 0100. At 0600 it reboots, turn on sound and let the alarm go. At 0730 the phone turns on and the screen becomes brighter. At 0800 a schedule starts, so IF CMP recons certain cell towers it turns on my Car profile. That one changes when I arrive at work to a work profile. Different sounds and lots more. IF my calender say I am in a meeting the screen will turn off and and sms will be sent to any that call me...
I have schedules for everyting. Nights - evening, weekend and wifi, tugging kids to bed and more....
So in short. CMP let you control whatever your device should do according to your position, the time of the day or your calender.
http://forum.xda-developers.com/showthread.php?t=299070
It has MANY details so it might take you some time to get deep with it, but from then it WILL become THE app of your device..trust me.
Thanks Martin, That looks like it does what i want, using cell phone masts is a much better idea than using GPS i guess.
However i'm put off slightly by the ugly skins and many details that will take me some time to get configured, i just want a simple background service that remembers what cell phone masts were responding when i get a successful authenticated wifi connection, and to use that information to turn wifi on the next time i'm in that area. The rest of my phone's profile such as back-light and ringtones etc i'm totally happy with managing myself as i'm not yet ready for my phone to be in control of my life! - i guess what i'm saying is the service shouldn't have any need for a configuration screen, and if it does, then it should be formatted and laid out in a standard way that doesn't look so scary or require me to identify my screen size before i download it!..
perhaps someone out there with more time on there hands than me could write this service and sell it on marketplace?!
CMP runs as a service
I couldn't resist the challenge.. i have written this as a tiny background service...
Wherever you turn your wifi on and get a connection, your phone will remember this and turn it on next time your there, also if you wander outside that 'connected' location and loose your wifi connection your wifi will be turned off until either you wander into a previously 'connected' location or turn it on manually... - turning it on manually and connecting to a wifi network will add that location etc etc... so no profiles, no config, no skins, no setup, no frills.. just plain handy.
if like me anyone is sick of wifi draining the battery when accidentally left on, or up sizing your phone bill when its accidentally left off, then get in touch and i'll slip you a copy to beta-test for me!
Cheers
If possible, can you guys please edit the default system.settings on your rom so Settings.System.AIRPLANE_MODE_RADIOS = 'cell, bluetooth' instead of 'cell,bluetooth,wifi'.
That way wifi works on airplane mode.
Bluetooth still doesn't work even if you did AIRPLANE_MODE_RADIOS = 'cell' or even 'cell,wifi'. For some unknown reason.
here is the source code for a program I wrote for this (its on the market), but its pretty easy to change and maybe we won't need my app for it.
Also posted on the issue tracker for android so it gets enabled & fixed for a next release. Here
crackertc said:
If possible, can you guys please edit the default system.settings on your rom so Settings.System.AIRPLANE_MODE_RADIOS = 'cell, bluetooth' instead of 'cell,bluetooth,wifi'.
That way wifi works on airplane mode.
Bluetooth still doesn't work even if you did AIRPLANE_MODE_RADIOS = 'cell' or even 'cell,wifi'. For some unknown reason.
here is the source code for a program I wrote for this (its on the market), but its pretty easy to change and maybe we won't need my app for it.
Also posted on the issue tracker for android so it gets enabled & fixed for a next release. Here
Click to expand...
Click to collapse
Are you serious??? Wifi on with Airplane Mode?.... you know what airplane mode is right?... it means no communications from or to the device so it's safe to radio frequencies used in airplanes....
For me the airplane mode is a good way not to get your device turned off while your flying, so you still can play, write docs or anything you want inside your device (listening to music too)...
I don't think that is wise to turn on wifi on airplane mode!
josevtome said:
Are you serious??? Wifi on with Airplane Mode?.... you know what airplane mode is right?... it means no communications from or to the device so it's safe to radio frequencies used in airplanes....
For me the airplane mode is a good way not to get your device turned off while your flying, so you still can play, write docs or anything you want inside your device (listening to music too)...
I don't think that is wise to turn on wifi on airplane mode!
Click to expand...
Click to collapse
if wi-fi on airplanes is a big deal then why do most commercial airlines have wi-fi on board now?
Well for me i would love to have wifi or bluetooth enabled when im in air plane mode. Just useing the device to listen to music or do little things would save alot of power
josevtome said:
Are you serious??? Wifi on with Airplane Mode?.... you know what airplane mode is right?... it means no communications from or to the device so it's safe to radio frequencies used in airplanes....
For me the airplane mode is a good way not to get your device turned off while your flying, so you still can play, write docs or anything you want inside your device (listening to music too)...
I don't think that is wise to turn on wifi on airplane mode!
Click to expand...
Click to collapse
Usually, when you talk about something is because you know, or because you at least researched:
- Some airlines are starting to implement Wi-Fi on some of their planes
- Some phones let you turn on wifi while on airplane mode.
- Since iPhone OS version 2.0, you can enable wifi while on airplane mode, and now, since iPhone OS version 3.0, you can enable bluetooth while on airplane mode.
- Some Nokia phones ask you what do you want to disable when you go in airplane mode, they let the user choose.
linkmaster_6 said:
Well for me i would love to have wifi or bluetooth enabled when im in air plane mode. Just useing the device to listen to music or do little things would save alot of power
Click to expand...
Click to collapse
Well, if you'd like this, I wrote an app and it's on the market (Cyrket)
cyanogen's response through his twitter: @velazcod maybe it would be better to change the background sync option on the power widget to disable the radio instead?
even better.
Hope we will see it in 4.0.2
josevtome said:
Are you serious??? Wifi on with Airplane Mode?.... you know what airplane mode is right?... it means no communications from or to the device so it's safe to radio frequencies used in airplanes....
For me the airplane mode is a good way not to get your device turned off while your flying, so you still can play, write docs or anything you want inside your device (listening to music too)...
I don't think that is wise to turn on wifi on airplane mode!
Click to expand...
Click to collapse
American Airlines, Virgin Atlantic, Virgin America, Southwest, Delta, Continental and some of the smaller airlines started offering In-Flight WiFi last year. The planes that are WiFi capable are usually newer and/or have updated electrical and communications systems, not the 40 year old hub jumpers flying from Dallas to St Louis.
Normal WiFi operates on the 2500 to 5000 Mhz radio spectrum. Inflight WiFi operates on the 849 Mhz radio band, which is dedicated solely to inflight WiFi. While this is in the sub100 to 2000 Mhz radio spectrum that the airplanes communication and navigation systems operate on, the systems ignore the 849 Mhz frequency. You have to disable the cellular phone signal because it operates on the 850 and 1900 Mhz radio bands, which are also used by and could possibly interfere with the planes communication equipment. FM radios also need to be off because they operate from 76 to 108 Mhz, also in the range of the comm equipment. Even though the plane flies through radio signals in this range all the time with no ill effects, they ask that those devices be turned off as a precautionary measure, as in better safe than sorry.
BTW, me=aerospace engineer, also good at research.
thank you for a better explanation to everybody, especially mr jose. (better research next time to avoid being put in flames by your fellow friends here)
crackertc said:
thank you for a better explanation to everybody, especially mr jose. (better research next time to avoid being put in flames by your fellow friends here)
Click to expand...
Click to collapse
haha owned!
crackertc said:
thank you for a better explanation to everybody, especially mr jose. (better research next time to avoid being put in flames by your fellow friends here)
Click to expand...
Click to collapse
oooo sick burn! lol jk =)
crackertc said:
thank you for a better explanation to everybody, especially mr jose. (better research next time to avoid being put in flames by your fellow friends here)
Click to expand...
Click to collapse
No problem. This is a feature I'd like to see implemented as well, because it saves having to haul out the laptop to check emails and text/chat mid-flight, only to find I'm in a row with no power outlet (this happened once on my way to Japan, worst 16 hours of my life). I just wish there was a way around the NO VoIP restriction.
this is totally a good Idea..
for the moment there is an app for that
i just love to use that line.
BTW what about disable radio, sync, and terminate all related system app/tasks/resources that relate to it. Then just leave all else functional for wifi browsing and gmail viewing.
Think someone had to already think of this I am usually slow.
I think that is what cyanogen might of meant by his tweet.
rbgmode said:
this is totally a good Idea..
for the moment there is an app for that
i just love to use that line.
BTW what about disable radio, sync, and terminate all related system app/tasks/resources that relate to it. Then just leave all else functional for wifi browsing and gmail viewing.
Think someone had to already think of this I am usually slow.
I think that is what cyanogen might of meant by his tweet.
Click to expand...
Click to collapse
Well, when you go into airplane mode radio gets turned off. However, if you shutdown sync, from my understanding, you won't be able to use gmail (please correct me if I'm wrong). There might be a few processes that can be killed but I don't think it'll do that much of a difference in terms of battery life or performance since it'll only be 1 maybe 2 services.
What cyanogen meant by his tweet was that he will change the sync toggle on the donut power widget, and replace it with a radio toggle, so you can just shutdown the cellphone radio and then you won't have to worry about wifi,bluetooth, etc not working in airplane mode. So, you'll actually won't be using the "airplane mode" option, just the "radio off" option...
I think that's a great idea for his rom, however, I don't think that would be something that will be done on android donut's branch or other long term branches, we need to try to put the ability to select what you want to turn off when you go officially into airplane mode, that way it doesn't confuse people and/or people think that android phones can't go into wifi because they don't really understand what "radio off" really does.
mmMMm.... whatever I just wrote sounded complicated... sorry if nobody understands, I'm a really bad "teacher", sometimes I don't know how to explain things clearly and correct.
crackertc said:
Well, when you go into airplane mode radio gets turned off. However, if you shutdown sync, from my understanding, you won't be able to use gmail (please correct me if I'm wrong). There might be a few processes that can be killed but I don't think it'll do that much of a difference in terms of battery life or performance since it'll only be 1 maybe 2 services.
What cyanogen meant by his tweet was that he will change the sync toggle on the donut power widget, and replace it with a radio toggle, so you can just shutdown the cellphone radio and then you won't have to worry about wifi,bluetooth, etc not working in airplane mode. So, you'll actually won't be using the "airplane mode" option, just the "radio off" option...
I think that's a great idea for his rom, however, I don't think that would be something that will be done on android donut's branch or other long term branches, we need to try to put the ability to select what you want to turn off when you go officially into airplane mode, that way it doesn't confuse people and/or people think that android phones can't go into wifi because they don't really understand what "radio off" really does.
Click to expand...
Click to collapse
if you disable sync it only disables push email so you wont know you have any new mail till you check manually.
RaiderX303 said:
if you disable sync it only disables push email so you wont know you have any new mail till you check manually.
Click to expand...
Click to collapse
Correct. However, I never said that we will disable sync. I said that what cyanogen meant was that he will REPLACE the sync toggle on the power widget on his rom, with a toggle that turns off radio only.
crackertc said:
thank you for a better explanation to everybody, especially mr jose. (better research next time to avoid being put in flames by your fellow friends here)
Click to expand...
Click to collapse
Yup... feelling kinda burned! hehehe... anyways, learning new things every day
Isn't there a way to just turn off phone functions? Some time ago I had an HP iPaq hw6945 (great phone by the way), and you have the possibility to turn off the "Phone" (kinda locks the sim card) so you could use the phone as a regular PDA. This way you could turn on the wifi and use it the way you like. In the G1 if the sim card gets locked then the lockscreen pops up and you can't use your device at all. Can be posible to lock the sim card without locking the phone? This could help this inflight-wifi request, I think.
Edit: This is just an idea, please don't burn me again!
josevtome said:
Yup... feelling kinda burned! hehehe... anyways, learning new things every day
Isn't there a way to just turn off phone functions? Some time ago I had an HP iPaq hw6945 (great phone by the way), and you have the possibility to turn off the "Phone" (kinda locks the sim card) so you could use the phone as a regular PDA. This way you could turn on the wifi and use it the way you like. In the G1 if the sim card gets locked then the lockscreen pops up and you can't use your device at all. Can be posible to lock the sim card without locking the phone? This could help this inflight-wifi request, I think.
Click to expand...
Click to collapse
Yes there is. You need to install AnyCut, free, or BetterCut, not free. And add a new application shortcut for "Phone Info".
Then open the "phone info" icon on your home screen, and go all the way down and there will be a button that says "Turn off radio"
As you can see, its a tedious process and it's why we would like options for the Airplane Mode, something like what my app does. For now, cyanogen is trying to switch the sync toggle on the power widget, and replace it with a radio toggle so you can do exactly what you want, but easy and fast.
Not being of mathematical mind im having trouble understanding the settings in a tasker profile i want to create.
What i need is a rule that would
a) switch on wifi when the screen is switched on
b) switch off wifi 2 minutes after screen turns off
Help would be appreciated!
android does that automatically. when the screen is of wifi goes to sleep after a certain timeout (you can change that timeout using OCLF)
Tasker meh!
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
stinkypete said:
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
When I first bought Tasker, I felt the same way. The UI felt difficult to understand and I couldn't really get it to do what I wanted. Every few weeks, I would redownload it and give it another try, then quickly give up. At some point, it started to make sense and I figured out how it all works.
Yes, Tasker has a large learning curve and the UI needs work, but the time it took to figure it out has been so well worth it.
stinkypete said:
<snip>
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
Part of the attraction of Tasker for me is that it's not centred around loading and personalising profiles from a public 'bank'. Yes there are profiles that people have shared, both on the Tasker website and in numerous threads on various forums. I treated these as learning examples, 'tutorials', and used them to gain an understanding of how to start writing my own profiles.
I've had Tasker about 3 / 4 months and have written approximately 15 profiles that have significantly changed how I interact with my N1, and how it interacts with my environment. These range from the very simple (reduce media volume when a wired headset is plugged in), to the horrendously complicated (workaround an issue with my bluetooth connection to my car kit).
I doubt whether I would have bothered to experiment to this extent if the focus had been on loading up and personalising publicised profiles.
I agree that the UI is perhaps less polished than other apps, however at most I would suggest that the dev has concentrated first on function over form. As a software developer who cut his teeth on mainframe COBOL I approve of that, particularly given the number of pretty but buggy apps on the market. Personally I care more about Tasker working correctly - I don't want my phone to ring during meetings if it's set not to - than looking pretty, as (in between tweaking profiles) I don't really see the app itself.
Sorry it took a while to read these replies!
Anywho, i now have had a different idea - tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
ftgg99 said:
tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
Click to expand...
Click to collapse
Which is exactly what the WiFi Near Profile does,
with the time interval for each check being possible to set to your own liking.
However, you adding additional restrictions based on the cell-near could save some useless scanning. Usually Wifi Access points have a fairly static location don't they, so why do a WiFi Near scan if you are not at your home/work/collage anyway.
daoth said:
- Start skype when wifi is connected, logout skype on wifi disconnect
Click to expand...
Click to collapse
How did you achieve the logout on wifi disconnect? I can't get Tasker to kill apps, which is said to be a common problem under the latest FroYo stock ROMs (at least for my Desire HD)
I don't have root access btw, since that requires me to downgrade my ROM first, which would cause me to loose my warranty...
daoth said:
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
Click to expand...
Click to collapse
How did you get wifi to switch off when its not connected to any network, occasional i leave the house and i forget to switch wifi off. I tried location based wifi off but it wont be as fast or accurate as switching off wifi when theirs no connection after lets say 1-2 minutes. I considered getting another app to do this after i tried to get it to work with tasker, but i have enough apps running in the background.
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
arielc said:
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
Click to expand...
Click to collapse
That may be linked to timings of background context checks when the screen is off.
Personally I always leave GPS on, but only use Net location / Cell IDs for my Tasker location contexts.
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
drgopoos said:
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
Click to expand...
Click to collapse
I am posting one everyday this week and I think I have a couple more. I will post even more whenever I either come up with new ideas or someone gives me a new idea.
Ok, I have a very basic understanding of tasker. I actually was able to make my gps app turn on the gps when being executed. I only added gps off exit task after reading the wiki. However, I'm trying to find a way to do the following:
when selecting pandora icon (I say icon, as I may need a pointer to the actual app)
verify wifi connection status - if connected, then load pandora app; if not connected, kill pandora app (might be redundant but just in case)
I also need to create a general wifi connection status, such that if connection is lost, kill specific running apps (such as pandora; could add more later)
I tend to fall asleep using headphones and pandora. I'd REALLY hate to find out that my cable/wifi went down while asleep and I've just been listening to pandora using cell data for several hours.
Now, making a profile to turn on wifi is easy enough, but not sure how to do the above. I'd imagine it'd be something like:
If [pandora app] initiated
wifi_connected = 1 (or yes or whatever)
then load [pandora app]
any help would be appreciated
EDIT: Nevermind. Though knowing more about how variables are used in TASKER would be interesting (I'll play around with them some more), I found out that with wifi ON, cell data usage is cut off. I disconnected my cable connection and with wifi still on, I couldn't connect to anything. So worry was unfounded, it turns out.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
thanks once again.. am testing out a few of them
drgopoos said:
thanks once again.. am testing out a few of them
Click to expand...
Click to collapse
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Some actual description of what the tasker profiles do would be very helpful... also less tit shots so that I don't catch crap for looking at the site from work would be nice.
dbilliter said:
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Click to expand...
Click to collapse
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
drgopoos said:
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
Click to expand...
Click to collapse
Sorry for the delay. I don't know of a way personally. I can only work with what I got and I don't have a headset with a mic so I have no way of testing. One option you could do though is have a menu pop up and ask you which you want.
I recently released Wireless Minder on the Play Store and would like your feedback. The short description is that it automatically powers down unused radios and occasionally powers them up to check for a connection. A radio "up periscope" is an analogy I like to use.
There are refinements that I'm planning and surely more that I haven't thought of. It's stable and functional enough that I wanted to get it out there. Knowing me, the longer it sits around the more likely it'll get forgotten
Thanks in advance for your feedback, good or bad. I'll try to incorporate your suggestions and fix any device compatibility issues.
Play Store link : https://play.google.com/store/apps/details?id=onenosepeace.wirelessminder
Mod edit: Link that included paid apps removed.
Sounds interesting, but I'll pose this question / scenario:
Say I turn my mobile data [3/4g] off, and use minder to mind to mind mobile data, while wifi is off. If wifi is off and it does its check based on a poll count, when it sees wifi is off, is there anything that will cause it to stay connected? or rather, what's making it stay disabled in that scenario.
teh roxxorz said:
Sounds interesting, but I'll pose this question / scenario:
Say I turn my mobile data [3/4g] off, and use minder to mind to mind mobile data, while wifi is off. If wifi is off and it does its check based on a poll count, when it sees wifi is off, is there anything that will cause it to stay connected? or rather, what's making it stay disabled in that scenario.
Click to expand...
Click to collapse
The behavior now is that it will try to keep one of the data connections active. If WiFi is connected, and Mobile 3G/4G is selected, it will periodically shut off the Mobile radio. It powers it back up occasionally to check for texts, missed calls, etc.
If there is no WiFi connectivity, it will not shut off the Mobile radio even if the option is selected. Is your preference to periodically shut off the Mobile radio even if there's no WiFi? I could add that option in the Settings. I plan to add a user option to choose how long to keep the Mobile radio active.
Edit: Fixed backwards logic typo
Not to be rude but it looks like a nice app to have but it seems like you need to redesign the UI.
If you know how to code it then ill design it for you and ill send you the PSD or JPEG files so you
can intergrate it into your app. Just let me know. :good:
Neat application.
SystemErrorOne said:
Not to be rude but it looks like a nice app to have but it seems like you need to redesign the UI.
If you know how to code it then ill design it for you and ill send you the PSD or JPEG files so you
can intergrate it into your app. Just let me know. :good:
Neat application.
Click to expand...
Click to collapse
No offense taken. I have no shame over my lack of graphics arts skills I welcome artwork contributions or any other contributions.
chefp said:
The behavior now is that it will try to keep one of the data connections active. If WiFi is connected, and Mobile 3G/4G is selected, it will periodically shut off the Mobile radio. It powers it back up occasionally to check for texts, missed calls, etc.
If there is WiFi connectivity, it will not shut off the Mobile radio even if the option is selected. Is your preference to periodically shut off the Mobile radio even if there's no WiFi? I could add that option in the Settings. I plan to add a user option to choose how long to keep the Mobile radio active.
Click to expand...
Click to collapse
That would be preferable, because there are times when I have neither wifi or 3g connected. You can still get calls / text without mobile data, unless you're using a voip app, like google voice, etc.
Good app. Thanks for sharing. If you plan to release a donation version, take my advice and keep these basic features free to cater to your initial user base.
You should add features like: SSID exception lists (guest, public etc.), configurable minding intervals per module and time of day schedules when minder should scan (no need to scan for car bluetooth while sleeping).
EDIT: And automatic start at boot option.
Maybe also make some of these features part of the donate / pro version.
Cheers,
C.
teh roxxorz said:
That would be preferable, because there are times when I have neither wifi or 3g connected. You can still get calls / text without mobile data, unless you're using a voip app, like google voice, etc.
Click to expand...
Click to collapse
What you're referring to is disabling Mobile Data which still allows calls/texts to go through. That doesn't save much power since the cellular radio remains on. Wireless Minder completely turns off the cellular radio by using a modified version of Airplane Mode. It's the only switch Android provides to disable the Mobile radio. The side effect of this is of course that calls/texts will not operate when the Mobile radio is turned off.
Would you like an option to periodically check Mobile Data and disable it if there's no cellular service? Searching for service can chew through battery but I'm not sure if disabling Mobile Data will improve that. I'd need to figure out a way to offer both features without confusing people.
cheatman said:
Good app. Thanks for sharing. If you plan to release a donation version, take my advice and keep these basic features free to cater to your initial user base.
You should add features like: SSID exception lists (guest, public etc.), configurable minding intervals per module and time of day schedules when minder should scan (no need to scan for car bluetooth while sleeping).
EDIT: And automatic start at boot option.
Maybe also make some of these features part of the donate / pro version.
Click to expand...
Click to collapse
I intend to keep the base version free. I've considered releasing a paid Pro version, it depends on how much work I end up having to put into advanced features. I like your idea of having independent timers for each radio as well as a scheduler. I'll put those on the list and add them as soon as I can.
Wireless Minder does auto-start at bootup. Are you asking for a switch to disable that?
As requested, I've added separate check interval settings for WiFi, Bluetooth and Mobile. Just uploaded version 1.04 to the Play Store and it may take a few hours for the listing to be updated. Sorry this took so long. The custom picker control was a PITB.
Next on the list is a user-selectable schedule for Wireless Minder to be active.
LINK
Version 1.05 adds scheduling: choose when Wireless Minder should manage the radios. I've accounted for the corner cases that I could think of such as the start time being later than the stop time (e.g. night owls). I only have so much time to test all the different scenarios so please let me know if you see a problem.
Keep the requests coming!
Edit: I've seen odd behavior that may be related to scheduling with Mobile 3G/4G enabled on Android 4.2+ devices. On those devices, superuser is required to modify airplane mode. What seems to happen is that superuser blocks for a long time then when it releases, a bunch of queued up checking events fire rapidly in succession. It's been a tough one to nail down so if anyone sees this please report your settings and when it happens (for example, right after the schedule start time passes).
Posted 1.06 today.
version 1.06 adds option to mind mobile data: automatically disable mobile data when WiFi is connected (and automatically enable mobile data when WiFi disconnects).
Add setting option to open hidden Radio Info menu. This allows changes to the mobile radio speed 2G/3G/4G (aka EVDO/GSM, WCDMA, LTE).
Temporarily disable mobile radio control on Android 4.2+ devices due to SU blocking.
i like your idea, but i'm not willing to cut the cord and turn off the cellular radio. I usually leave wifi off anyway, i guess i could just use it for bluetooth...
beddess said:
i like your idea, but i'm not willing to cut the cord and turn off the cellular radio. I usually leave wifi off anyway, i guess i could just use it for bluetooth...
Click to expand...
Click to collapse
Yes control of the cellular radio is optional and off by default. Everyone's situation is different, just note that WiFi uses alot less power than the cellular radio. Some phones get twice as much battery runtime when on WiFi compared to only the cellular radio.
Personally I've found the Bluetooth functionality to be handy. When I hop in the car, I don't have to worry about manually turning on Bluetooth (or turning it off when I get out of the car). When a call is made or received, Bluetooth automatically turns on and it connects quickly enough to take the call.
Released version 1.07
Fix WiFi detection for mobile data control
I've seen instances where the WiFi drops but mobile data isn't automatically re-enabled. Let me know if this happens and with what type of WiFi connection (home, public, etc).
On cm10.2 nightly your app is unable to detect that my phone is rooted. But otherwise neat idea, i like this app.
Verstuurd vanaf mijn Nexus 4 met Tapatalk 4
jelle2503 said:
On cm10.2 nightly your app is unable to detect that my phone is rooted. But otherwise neat idea, i like this app.
Click to expand...
Click to collapse
Thanks
I disabled mobile radio control in version 1.06 because su was blocking with scheduling enabled. When this happens, the alarms get queued up and when su decides to unblock, they fire rapidly in succession. It's a very poor user experience. I've tried to pin down the problem but haven't found a solution yet. It's either RootTools or su itself not behaving as expected.
Hi,
i didn't know the app come from here ^_^;
Btw i left a message on playstore..
I would like to turn off gsm radio totally and keep wifi...
the app instead turn off all putting in aero mode.
Is there a way to reactivate Wifi after aero mode on? or just to power off gsm mobile radio and keeping wifi?
Chooo
Ninja_Gundam said:
Hi,
i didn't know the app come from here ^_^;
Btw i left a message on playstore..
I would like to turn off gsm radio totally and keep wifi...
the app instead turn off all putting in aero mode.
Is there a way to reactivate Wifi after aero mode on? or just to power off gsm mobile radio and keeping wifi?
Chooo
Click to expand...
Click to collapse
I just saw your message, sorry for the late response. Oddly your comment didn't show on the Play Store. Regarding the mobile radio (e.g. GSM), Google doesn't provide a standard way to control it just by itself. The only common method is through Airplane Mode. To address your concern, I've configured Airplane Mode to allow WiFi and Bluetooth to continue working. The recently released version has revamped mobile/cellular behavior. It defaults to controlling Mobile Data (leaving the radio on). If you'd like it to control the Mobile Radio, there's an option under Settings.
Hope that's explanation makes sense. If you have any more questions please feel free to post here or PM me.
Are there any more updates planned for it or not?