Why Bluetooth PAN sucks compared to DUN - 8125, K-JAM, P4300, MDA Vario ROM Development

I use my cell modem on the train every week. When I was running the stock WM5 on my TMobile MDA G3, I would connect over a fake modem connection over the bluetooth serial service.
Here are all the reasons why it sucks not having DUN anymore, as I'm running the WM6 Faria Clean ROM:
1) You need to take the phone out of your pocket, go to programs, internet sharing, connect, then go to your laptop, go to bluetooth, your phone, services, network service or some such series of clicking. With DUN, you double click on a shortcut icon, and you're connected 5 seconds later.
2) Everytime EDGE is dropped, the phone disconnects (say you go through a tunnel), you have to repeat the steps in #1. With DUN, you can optionally just have it try to reconnect as many times as you like, and you'll see a systray icon change when you're finally reconnected.
3) You can't bind your email client, browser, whatever to autodial your connection, because it's not a real connection.
That said, why the hell doesn't the ROM have bluetooth serial?? Am I totally missing how to enable this service?

uhm in the bluetoothsettings there is a tab called com ports
u have to connect the device and then add a com-port to it
i guess

da_jojo said:
uhm in the bluetoothsettings there is a tab called com ports
u have to connect the device and then add a com-port to it
i guess
Click to expand...
Click to collapse
I think I've tried this before. I created an outgoing com port to the laptop, but still the only services on the bluetooth interface to the phone are 'network access point' and 'voice gateway'.

weird
pan shouldnt be dropping the line if its temperarly without signal
it has a timeout of 120 secs or so if im correct, assuming the bluetooth
connection isnt dropped..
when u set edge to be allways on it should reconnect within time

da_jojo said:
weird
pan shouldnt be dropping the line if its temperarly without signal
it has a timeout of 120 secs or so if im correct, assuming the bluetooth
connection isnt dropped..
when u set edge to be allways on it should reconnect within time
Click to expand...
Click to collapse
I might've been going through tunnels for more than a minute, but I think generally if it drops EDGE, it drops the PAN connection.

Related

Polaris: WLAN problems?

Hi all,
I recently bought my HTC Polaris. It's the first wireless device I have, so I also bought a WiFi router to test it. I do not have any previous experience with WiFi on WinMobile, so the problems I am having could just be due to my newbie-ness...
I initially set my WLan router to WPA-PSK. I was able to get my Polaris connected, but at random times and repeatedly the device would stop receiving data (using IE, Google Maps...) with no apparent reasons. The wlan was still shown as connected in . At other times, it was unbearably slow. Sometimes it was difficult to reconnect after that.
Now I set my router to unprotected WLan, just for the sake of test. The connection with my Polaris seems more stable. I will keep testing.
In both situations there is something that puzzles me. In Settings-Connections-Wireless Lan, Main tab, it shows:
Tx speed = 54 Mbps
Rx speed = 1 Mbps
Also in the Advanced tab, the status is always shown as "Associated to the network" ("Associato alla rete"). I never saw "Connected to the network" ("Connesso alla rete") here.
Is this right? Did anyone else experience problems with the Polaris WLan? Is it possible that it works ok with no encryption, and doesn't with WPA? Please help!
*update*: while I was typing I was looking closely at the Rx speed. It seems to jump anywhere from 1 to 54 Mbps (but mostly stays at 1). I did not move the Polaris during this test. The signal strenght is good. The WLan adapter of my PC (where I'm typing looking at my Polaris screen) shows it as "excellent" and the connection pc-router is absolutely fast and stable.
I have no clue of what it can be.
----------------
Lucio
WLAN Problems
This may not be related but I am managing to use a Netgear Router with WEP, however I do experience a lot of drop outs but more importantly I can't get any connections with the phone unless the battery saver setting is set for max performance. The phone also gets quite warm after 15 minutes operation on this setting.
Stuart
as enterpryse has suggested you could go to settings>connections> wireless Lan> Power mode and move the cursor to best performance.
let me know if anything changes.
Jackster said:
as enterpryse has suggested you could go to settings>connections> wireless Lan> Power mode and move the cursor to best performance.
Click to expand...
Click to collapse
I'd say this is the best bet too.
But if you still having trouble try to reconfig your router allowing basically anyone regardless of topology to connect with it. And try using your pc simultaneously to see if it’s the router.
It could also be certain pages that you browse or maybe you router is updating too frequently I had that problem the other day because but kept updating my router for me.
And how long does you device take before it get quite hot? would i be out of line if i said maybe its because you're insulating the device with your hand? (I know the device needs to be held lol but that might be the only answer to your problem unless it’s an excessive heat problem then I would consider contacting HTC / the battery manufacturer / processor manufacturer)
Well, I'll be...
I kept trying to duplicate the problem. I set my WiFi router back to WPA as it was before when I was getting problems. Same PSK.
But after the first bad experiences (and my previous post), no more problems. The Rx speed is usually 42 to 48 Mbps now. It looks like this was the indicator that something was wrong in my first attempts, when I always got Rx=1. At 42 or more, everyting goes fast: Opera, Fast GPS, Google Maps... And I did not experience any more connection drops, data flow hangs, or slowness in connecting to the WLan.
The WLan router was already working fine, since I was already connected to it with my pc. I cannot explain why it didn't almost work and it's working fine now. The only thing I changed was the WLan channel. Could this be an explanation?
Moebius61 said:
The only thing I changed was the WLan channel. Could this be an explanation?
Click to expand...
Click to collapse
Of course, are there any other wlans around you? If they are on the same channel your router goes down with the speed till a stable connection is established.
Even if you have other wireless device e.x mouse, headset, keyboard. They often transmit on the 2,4GHz band an interfere with wlans.
Can't even load wireless mode!
I've just received my Touch Cruise and have started setting things up. I'm a previous owner of the Hermes so I know my way around the device. Or so I thought...
Using Comm Manager to start up wireless lan, when I click on the button, it thinks for a while but doesn't load up WLAN. The button stays in the "off" setting. Tried pressing a few times, no luck.
Tried switching off all other connection types and just switching on WLAN - still doesn't work. Tried using the hotlink via "Wireless LAN" icon through settings/connections to turn WLAN on. Still no luck. Resetting makes no difference.
Phone is otherwise working brilliantly. Looks like a driver issue, as I had a similar problem from time to time on the Hermes with Black ROM. Any ideas on what else I could try?
le_paulo
"Resetting makes no difference."
Did u do a soft or hard reset?
@Jackster - both soft and hard reset tried. No difference. But after the hard reset I re-installed Goodlink which threw up an error message "Communication port WIFI is locked down". Which suggests to me that WLAN is visible but access has been restricted somehow.
The question is why (??) and how to undo it...
Nothing a cooked firmware can't fix
Meantime, if anyone knows registry settings I should check to do some basic diagnostics, I'd appreciate it.
Moebius61 said:
Hi all,
I recently bought my HTC Polaris. It's the first wireless device I have, so I also bought a WiFi router to test it. I do not have any previous experience with WiFi on WinMobile, so the problems I am having could just be due to my newbie-ness...
I initially set my WLan router to WPA-PSK. I was able to get my Polaris connected, but at random times and repeatedly the device would stop receiving data (using IE, Google Maps...) with no apparent reasons. The wlan was still shown as connected in . At other times, it was unbearably slow. Sometimes it was difficult to reconnect after that.
Now I set my router to unprotected WLan, just for the sake of test. The connection with my Polaris seems more stable. I will keep testing.
In both situations there is something that puzzles me. In Settings-Connections-Wireless Lan, Main tab, it shows:
Tx speed = 54 Mbps
Rx speed = 1 Mbps
Also in the Advanced tab, the status is always shown as "Associated to the network" ("Associato alla rete"). I never saw "Connected to the network" ("Connesso alla rete") here.
Is this right? Did anyone else experience problems with the Polaris WLan? Is it possible that it works ok with no encryption, and doesn't with WPA? Please help!
*update*: while I was typing I was looking closely at the Rx speed. It seems to jump anywhere from 1 to 54 Mbps (but mostly stays at 1). I did not move the Polaris during this test. The signal strenght is good. The WLan adapter of my PC (where I'm typing looking at my Polaris screen) shows it as "excellent" and the connection pc-router is absolutely fast and stable.
I have no clue of what it can be.
----------------
Lucio
Click to expand...
Click to collapse
I got the same problem. I changed the connection settings of ActiveSync to
allow wireless connections when connected to a desktop computer.
Maybe this will fix your problem.
session said:
I got the same problem. I changed the connection settings of ActiveSync to
allow wireless connections when connected to a desktop computer.
Maybe this will fix your problem.
Click to expand...
Click to collapse
Good but where did you find this option on ActiveSync ? I just see an option whith BT not Wifi ?
Moebius61 said:
Hi all,
I recently bought my HTC Polaris. It's the first wireless device I have, so I also bought a WiFi router to test it. I do not have any previous experience with WiFi on WinMobile, so the problems I am having could just be due to my newbie-ness...
I initially set my WLan router to WPA-PSK. I was able to get my Polaris connected, but at random times and repeatedly the device would stop receiving data (using IE, Google Maps...) with no apparent reasons. The wlan was still shown as connected in . At other times, it was unbearably slow. Sometimes it was difficult to reconnect after that.
Now I set my router to unprotected WLan, just for the sake of test. The connection with my Polaris seems more stable. I will keep testing.
In both situations there is something that puzzles me. In Settings-Connections-Wireless Lan, Main tab, it shows:
Tx speed = 54 Mbps
Rx speed = 1 Mbps
Also in the Advanced tab, the status is always shown as "Associated to the network" ("Associato alla rete"). I never saw "Connected to the network" ("Connesso alla rete") here.
Is this right? Did anyone else experience problems with the Polaris WLan? Is it possible that it works ok with no encryption, and doesn't with WPA? Please help!
*update*: while I was typing I was looking closely at the Rx speed. It seems to jump anywhere from 1 to 54 Mbps (but mostly stays at 1). I did not move the Polaris during this test. The signal strenght is good. The WLan adapter of my PC (where I'm typing looking at my Polaris screen) shows it as "excellent" and the connection pc-router is absolutely fast and stable.
I have no clue of what it can be.
----------------
Lucio
Click to expand...
Click to collapse
Same problem here. Tx = 54mbit Rx = 1 mbit. Sometimes it works ok (with Rx 24-54mbit) but most of time there are huge drops so i cant use wlan at all.
My Nokia N95 works excellent at the same settings with same router.
My polaris wlan battery is set to "Max Performance".
Any clue?
weird
This is the second XDA Orbit 2 (Polaris) I've had in a week. I returned the first one because of WLAN problems. Exactly the same with this one.
I have a Netgear DG834GT, WPA-PSK encryption set to 'auto 108mbps' on channel 6. As other posters here, tried no encryption, changing channels, g only, g & b, as well as all the other suggestions on here. All I got was Rx=1, screen icon showing connected and no web access etc.
Then I noticed that my Orbit 2 mac address appeared on the Wireless Station Access list in my router wireless settings. I clicked on the Add button to add my XDA to the Trusted Wireless Station list (but Access Control was NOT switched on) and EUREKA, it started working, but not very reliably. Surely this shouldn't be necessary. I have had an XDA Orbit for a year with absolutely no problems, so I know my around the new one. There must be a problem with the Orbit 2 - surely we can't all be wrong?

priotize w-lan for internet connetions

-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)

GPRS and WiFi auto-connect/disconnect troubles

Even though WiFi is up and running, my phone keeps getting connected via GPRS automatically. Although most programs use the WiFi connection, sometimes they switch over to GPRS. Also, when I reboot the phone, WiFi gets deactivated and GPRS kicks in automatically. Of course, this is a bad thing since my carrier allows only 1MB of downstream on GPRS.
The other problem is that WiFi keeps getting disconnected after a period of inactivity. Now I don't mind this happening as it saves battery, but I don't want this to happen when I'm at a place having access to a power source. Strictly speaking, I could live with the WiFi getting disconnected, but the irritating thing is that sometimes it just doesn't reconnect - instead, a baloon pops up informing me of all other wireless networks available - my network isn't listed! Then after a few more minutes, it automagically connects to my network. Sometimes, to get the wifi to connect, all I have to do is click on the "G" icon (I'm about to open the wireless manager) and the WiFi starts to connect! Just w.t.h is going on here? :S
Now the common "solution" for the GPRS problem that's floating around the net is to use a program that disables the GPRS connection, like Modaco NoData or such, but I'm looking for a more permanent solution (regtweak?) by which:
1) GPRS is never connected and if connected, never used by any program IF there's an active WiFi connection
2) When the phone (re)boots, WiFi should be activated and if any "known" networks are found, should connect to it automatically, else it should be deactivated
3) Perhaps WiFi/GPRS can be enabled/disabled based on the cellid/GPS and/or time schedules? Now I know of programs that can do this, but I'm looking for something extremly light, preferably which doesn't have a GUI and/or runs as a service and can be configured by xml/ini/reg (or maybe have a seperate GUI for settings)
Any ideas people?
Thanks for your time.
Did you ever find a solution for this? I'm in the same boat and would like to know as well. Thx.
Yeah, I changed phones. Didn't face this issue on a Diamond and a Hermes.
got the same problem with my tg01 keeps dropping wifi and keeps connecting to gprs when wifi is on

Modem/dial-up not working using ATT Fuze and Energy 2.0 ROM

first off - i tried searching but could not find any solid info, from start to finish, how to make tethering work
i've never had to tether till now.. tried enabling Internet Sharing and connecting it both via USB and Bluetooth - no success.. i'm using Media Net $15 a month data plan, if that makes a difference (wap Vs gprs in user name but i did try both)...
is anyone using their phone as a modem? what settings do you have? please point the noob in the direction of a step-by-step guide if one is available (i did try to search but nothing than enabling Network connection via registry edit - not relevant)..
thanks a bunch to anyone who could help!
I'm online using the "internet sharing" connection now (in Florida cleaning up after a flood) (Yes, I need to get back to work . . . .).
I also have a Fuze and am using EnergyROM 2.0. Haven't changed any settings since installing the new ROM. Works like a charm for me.
Make sure the proxy box under the MediaNet settings is NOT checked.
vovan75 said:
first off - i tried searching but could not find any solid info, from start to finish, how to make tethering work
i've never had to tether till now.. tried enabling Internet Sharing and connecting it both via USB and Bluetooth - no success.. i'm using Media Net $15 a month data plan, if that makes a difference (wap Vs gprs in user name but i did try both)...
is anyone using their phone as a modem? what settings do you have? please point the noob in the direction of a step-by-step guide if one is available (i did try to search but nothing than enabling Network connection via registry edit - not relevant)..
thanks a bunch to anyone who could help!
Click to expand...
Click to collapse
Open up taskmanager and make sure that activesync is not running on the phone. this will not allow internet sharing to work. what does the phone say when you open internet sharing and click connect?
download a registry editor (i use total commander, and it works just fine).
open it up, go to \plugins\registry\HKLM\Comm\InternetSharing\Settings\ForceCellConnection and simply delete the contents of the value so that it's empty. Go ahead and do a soft reset and open up the internet sharing app. From there, select the Media Net connection and hit connect. Voila, good to go!
Enjoy!
ps I've gotten 2+ Mbps speeds via tethering
Dane Austin said:
Open up taskmanager and make sure that activesync is not running on the phone. this will not allow internet sharing to work. what does the phone say when you open internet sharing and click connect?
Click to expand...
Click to collapse
I keep activesync enabled so that i'm able to receive corporate email when on the road.
I was able to tether via USB (was doing nothing different from last night when i was unable to internet share via USB, however I noticed when shutting down that BT stack crashed); internet sharing app came up automatically once I selected internet sharing right after hooking up the cable to my laptop, and MediaNet was there by default (I guess it's all cooked into the ROM; did not have to delete any registry keys; kudos to NRGZ)... was able to get close to 1Mb/s download speed (upload is really slow however, less than 50Kb/s) - not too bad overall
Still have problem connecting via Bluetooth
maybe i'm having problem pairing laptop and Fuze? is there a pre-defined code/pass key that i'm supposed to use for the Fuze?
i was just using my security/lock code.. when laptop starts dialing (is dial up number *99# correct?), i get the following error box:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99#...
Error 678: The remote computer did not respond. For further assistance, click More Info or search Help and Support Center for this error number.
-------------------------------------------------
Anybody had this issue? or can share their connection settings for Bluetooth?
thanks everyone who responded!
vovan75 said:
I keep activesync enabled so that i'm able to receive corporate email when on the road.
I was able to tether via USB (was doing nothing different from last night when i was unable to internet share via USB, however I noticed when shutting down that BT stack crashed); internet sharing app came up automatically once I selected internet sharing right after hooking up the cable to my laptop, and MediaNet was there by default (I guess it's all cooked into the ROM; did not have to delete any registry keys; kudos to NRGZ)... was able to get close to 1Mb/s download speed (upload is really slow however, less than 50Kb/s) - not too bad overall
Still have problem connecting via Bluetooth
maybe i'm having problem pairing laptop and Fuze? is there a pre-defined code/pass key that i'm supposed to use for the Fuze?
i was just using my security/lock code.. when laptop starts dialing (is dial up number *99# correct?), i get the following error box:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99#...
Error 678: The remote computer did not respond. For further assistance, click More Info or search Help and Support Center for this error number.
-------------------------------------------------
Anybody had this issue? or can share their connection settings for Bluetooth?
thanks everyone who responded!
Click to expand...
Click to collapse
now, i just tried leaving User Name and Password fields blank on the Bluetooth connection wizard, and using dial-up number *99***1#, like they suggest here: Answer Center - Create a Windows XP Dial-Up Networking Connection for a Bluetooth Device , and got a new error:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99***1#...
Error 777: The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order.
-------------------------------------------------
this is just getting funnier but kind of frustrating...
nhshah7 said:
download a registry editor (i use total commander, and it works just fine).
open it up, go to \plugins\registry\HKLM\Comm\InternetSharing\Settings\ForceCellConnection and simply delete the contents of the value so that it's empty. Go ahead and do a soft reset and open up the internet sharing app. From there, select the Media Net connection and hit connect. Voila, good to go!
Enjoy!
ps I've gotten 2+ Mbps speeds via tethering
Click to expand...
Click to collapse
tis fixed my tethering issue... thank you!
Damn AT&T trying to force people to pay more for tethering... shame!
smittyofdhs said:
tis fixed my tethering issue... thank you!
Damn AT&T trying to force people to pay more for tethering... shame!
Click to expand...
Click to collapse
smitty, do you tether via bluetooth or usb? i have no problem with usb now but still get the same "error 678: the remote computer did not respond..." i wonder if my BT driver is corrupt or i'm blacklisted by at&t
if anyone is able to connect using bluetooth and Internet Sharing app on Energy or any other similar ROM, can you share your dial-up settings with me?
after i start Internet Sharing app, with PC Connection = Bluetooth PAN and Network Connection = MEdia Net, and then right click my Bluetooth Modem in Dial-up Network Places on my laptop, the icon shows "connecting" for about 5 seconds (and the data icon H on the phone starts rotating) and then the error comes up on computer screen.. i can't believe no one else has had the same issue, i must be something with my laptop
vovan75 said:
smitty, do you tether via bluetooth or usb? i have no problem with usb now but still get the same "error 678: the remote computer did not respond..." i wonder if my BT driver is corrupt or i'm blacklisted by at&t
if anyone is able to connect using bluetooth and Internet Sharing app on Energy or any other similar ROM, can you share your dial-up settings with me?
after i start Internet Sharing app, with PC Connection = Bluetooth PAN and Network Connection = MEdia Net, and then right click my Bluetooth Modem in Dial-up Network Places on my laptop, the icon shows "connecting" for about 5 seconds (and the data icon H on the phone starts rotating) and then the error comes up on computer screen.. i can't believe no one else has had the same issue, i must be something with my laptop
Click to expand...
Click to collapse
I haven't been able to get my HP laptop to pair via bluetooth with my Fuze yet so I was doing USB. With regards to your issue, do you ahve one or two pull down menus in INternet Sharing app? If you have 1, then your registry needs to be hacked. AT&T used a registry key to force Internet Sharing app to only use the isp.cingluar access point (instead of wap.cingluar). If you pay the extra bucks for the full unlimited with tehtering then your account is setup to use isp.cingluar as well as wap.cingluar. If you just have the normal unlimited w/o tehtering option (which is not unlimited it caps at 5GB/month) then you only can use wap.cingluar. THis is how AT&T is going more easily find people using the cheaper plan with thethering and of course charge them up the butt for violation of the TOS (that they keep changing). Removing the registry key, fixes the issue.
smittyofdhs said:
I haven't been able to get my HP laptop to pair via bluetooth with my Fuze yet so I was doing USB. With regards to your issue, do you ahve one or two pull down menus in INternet Sharing app? If you have 1, then your registry needs to be hacked. AT&T used a registry key to force Internet Sharing app to only use the isp.cingluar access point (instead of wap.cingluar). If you pay the extra bucks for the full unlimited with tehtering then your account is setup to use isp.cingluar as well as wap.cingluar. If you just have the normal unlimited w/o tehtering option (which is not unlimited it caps at 5GB/month) then you only can use wap.cingluar. THis is how AT&T is going more easily find people using the cheaper plan with thethering and of course charge them up the butt for violation of the TOS (that they keep changing). Removing the registry key, fixes the issue.
Click to expand...
Click to collapse
sounds like we are in the same boat here - i can tether my HP laptop with Fuze via USB no problem now using Internet Sharing app, but no luck with Bluetooth whatsoever... i don't think there is an issue with the registry ever since i switched to Energy 2.0 ROM which must have the settings customized (so yes, I do have 2 pull down menus, and I have Media Net selected in the second one). So, I tried to use both wap.cingular and isp.cingular APN's (both [email protected] and [email protected] for User Name, CINGULAR1 for password; then I tried leaving User Name and Password fields blank...) with no success... nothing works, damn it!!!
looks like it gets paired up briefly, then starts dialing and gets the error in a couple of seconds.. the problem must be with the bluetooth dial-up settings for AT&T, because: 1) i have no problem tethering via USB; 2) Fuze is being paired up with my laptop and trying to use HSPDA data connection (as indicated by rotating H on the phone for a few seconds while my laptop tries to dial up).
by the way, have you tried dialing *99# or *99***1# (i tried both numbers as well as *99***3# for Samsung phones) from your Fuze, did you get any modem dial tone??
thanks!
I was able to connect to internet through bluetooth by using the following settings.
After pairing the bluetooth on both Fuze and laptop:
On my Fuze: open 'Internet Sharing' then select Bluetooth PAN and choose the appropriate network connection (in my case TZones) then tap 'Connect'
On the laptop: open bluetooth neighborhood then 'discover service' or 'explore' on the Fuze device. You should see 'Network Access Point on [Fuze]' and then double click on it.
Done.
ICS on AT&T HTC Fuze Cut Off (NRG Rom Series 2.0)
AUTiger83 said:
I'm online using the "internet sharing" connection now (in Florida cleaning up after a flood) (Yes, I need to get back to work . . . .).
I also have a Fuze and am using EnergyROM 2.0. Haven't changed any settings since installing the new ROM. Works like a charm for me.
Make sure the proxy box under the MediaNet settings is NOT checked.
Click to expand...
Click to collapse
I've been using ICS with no problems with a ThinkPad T43 for a few weeks at work to circumvent the proxies and reach out to my home machine via RDP. The RDP app for the Fuze just doesn't cut it with its whopping 640x480 screen. Turns out that AT&T in NY/NJ is somehow monitoring the connections. I was watching a bunch of videos to pass some downtime, and I guess I triggered some kind of alert on their end. ICS will connect to MediaNET with no problems (settings read wap.cingular), ICS status shows connected (I am connecting over USB) and my ThinkPad network connection shows a private IP address handed to it by the phone (192.168.0.x range). However when I am trying to connect to something, I'll get timeout errors. Running a simple ping comes back with no DNS capabilities as I can't even ping google.com... Has this happened to anyone on the forum? Can anyone offer some advice? I am thinking of just calling AT&T and playing dumb, saying that I was watching videos, as well as moving lots of music from my home computer via FTP ... Any advice appreciated. I pay for the $40/month PDA plan... I don't see the point of paying for tethering when you're already paying for data. Yes, before people start flaming me, I was stupid by using the connection to watch a bunch of videos, but you're able to watch youtube on your phone anyway....
--UPDATED 7-31-09 3:03PM --
So I downloaded ICS Control v0.21, which by the way is an awesome program. I went through the config, was able to connect my laptop to my HTC Fuze via WiFi. That was easy. As palringo (win xp version) was connecting in the background, I was able to do a test google search and get back results. Ran a continuous ping on google (ping google.com -t). Turns out that after about 25 ping replies or so, just about the time it took me to do a few web searches, the requests start timing out. Directing the ping at another website shows that the ping request couldn't find the host... basically the same problem I had tethering over USB. It's as if the AT&T network is determining that the request is coming from a PC and not the PDA and not passing the DNS requests... Either way, I tried to ping google via 74.125.45.100 and got back a request timed out. I am now wondering whether or not this may have to do with the packet MTU and whether or not the PDA packets differ from regular PC/WinXP packets. I just don't know enough about networking to be able to know. I am able to ping the Fuze gateway (for all-intensive purposes set to 192.168.2.1) and get back replies within 2-4ms. I really would love to hear from someone to whom this has happened before. I haven't called AT&T yet as the data connection on the phone itself works just fine, and I am able to load pages on the phone just fine. It's just any form of ICS that's beat...
Come on XDA-Dev, I know the collective intelligence can come up with something here.
I didn't think ATT could detect the difference between tethered requests and ones that originate on the phone, that would be bad though, if that were the case. Since the previous poster was watching videos, it seems to me the bandwidth would be the comparable to watching videos with the YouTube app on the Fuze, which I'm sure is within the terms of service contract.
My experience is closer to vovan75's. ICS works fine via USB, but does not work via Bluetooth. The strange thing is with the BT connection, I can ping the gateway, and even do nslookup with the default DNS, and sometimes if I get lucky, the connection works for a few seconds, allowing a page to load, totally random.
I thought everything worked using the original ATT rom, so I have a feeling culprit is something in the NRG rom, or maybe a radio incompatibility. I might re-flash to the old official rom just to try this, before the next time I update to the latest NRG build.
My setup:
Fuze with EnergyROM (July 22 build)
Radio: 1.14.25.35 (from official HTC 6.1 update)
Notebook with Windows 7 RTM
Windows calls this "Bluetooth Network Connection" (I don't see a reference to DUN, at least not in Win7)
ICS using BT (not working):
IPv4: 169.254.46.56
Gateway: 169.254.247.172
ICS using USB (working):
IPv4: 192.168.0.102
Gateway: 192.168.0.1
Windows 7 calls this "Remote NDIS based Internet Sharing Device"
DSLReport speed test (Flash) - down: 696Kbs, up: 336Kbs (varies quite a bit, much better at night of course)
Okay, figured it out. The DHCP setting for the bluetooth PAN should be off (I know, counter-intuitive). I found this by diff'ing the entire HKLM-Comm registry branch of the last EnergyROM build (Sept 6) vs the official ATT 6.1 rom (5.11.502.2WWE), which did work after all.
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\BTPAN1\Parms\TcpIp]
"EnableDHCP"=dword:00000000
BTW, you don't need to setup Dial-Up Networking when using the Internet Sharing application (IntShrUI.exe). DUN needs to be configured on the PC when using the phone's modem bluetooth service, and AFAIK, needs to be provisioned by AT&T before it will work. The Internet Sharing app acts like an uplink for paired devices in the bluetooth personal area network (PAN).
rasterX, you rock! That little illogical registry fix is all I needed... I'd been banging my head against this Bluetooth DUN thing for days.
Thanks!

Bluetooth PAN with HTC Fuze

Hi All,
I'm trying to setup my computer so it can use my Fuze for an internet connection. I'm currently running...
IVT BlueSoleil version 6.4.249.0
EnergyROM 20090709 Standard
I am able to setup a pairing between my phone and my computer by connecting through BlueSoleil.
I notice that my phone connects to COM10 then disconnects, but it says paired on the BlueSoleil manager (don't know whats up with COM10).
I then go to Internet Sharing and connect (on my Fuze), it says device setup has finished, connect bluetooth PAN on PC.
I go back to BlueSoleil (on my computer), right click on my Fuze and click "Connect Bluetooth Personal Area Network" and it gives me "operation not succesful, please try again".
I'm not sure what else to do, I can connect through activesync using usb, but not through bluetooth.
Any ideas?
Update
I got something going on the connection but no internet connection.
Basically when the phone was pairing with the adapter, it would pop up the "COM Port 10" connected box. During the time it was trying to connect I would right click on the phone and click "connect to PAN" or whatever its called and it actually connected!
However, it assigned me a 169.something address and I opened IE in windows but it woudn't load any web pages....bummer.
I'm having a problem with the same ROM, NRG's last couple of ROM's haven't worked on Bluetooth Internet Sharing correctly for me. When I get a chance, I'm going to roll back to a few months ago when it was working for sure just to confirm it is something with the ROM.
BTW, mine connects successfully, but it doesn't give my laptop an IP correctly.
activesync don't use pan for bluetooth at all it does a direct serial connection over bluetooth not a pan network based one
here is a guide for pan
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
this search should give a lot of step by step guides how one
make the com bluetooth port and connect it giving the search
as it depend on which bluetooth stack being used in both ends
http://www.google.dk/search?source=...ivesync&btnG=Google-søgning&meta=lr=&aq=f&oq=
Solved....sorta
OK, so yesterday I had gotten an IP address and it was connected but I thought I wasn't getting any internet service. Turns out I was, but it was incredibly slow, and the connection would go on and off. It did what I wanted to do but its not useable.
While I'm posting, I wanted to do Activesync over Bluetooth but my Fuze has COM ports from 0 to 9 and my Bluesoleil has Com ports 10 and up. How am I suppose to get the two to communicate if I can't get them on the same port? If I try to create a new port in Bluesoleil it starts and 13 and keeps going up...
bever used that bluesoil but heard many bad things about that stack
never had any issues using ms or vidcomm stacks both on the pc side and pda side
and cross
but never really used PAN as I have a wifi router and even if I did not then
they are dirt cheap and if you got a cable or adsl modem you just plug that into the wifi router and connect your desktop with a cable as they are also swtichs
Changed ROM, very fast now
I changed ROM's this morning to the AHEN_ROM and wow, what a difference. Just connected to see what would happen and its just as fast as the USB connection was. I'm not sure what is different about the ROM's but I can surf the web over my phone connection very nicely now.

Categories

Resources