Hi everybody, very strange thing happened to me, because of bat drain I decide to switch back to WM5 and then put Core 2.0 back on it, I did this with Molski.biz AKU 3.3 - Crossbow look and I noticed the operator name exists as it should be (never happened before, I always had some digits instead of operator name), and after I've put core 2.0 back, then the digits appeared again instead of operator name.
Hope, I explained it ok
And the question is, can somebody give me any directions how to get the operator name back on my x-plore core 2.0, is there any reg key to change, I found that number (operator number) on two places, one is a string value, and the second is decimal, but if I try to change the string to my operator name, and reboot - nothing happened which is understandable in some point...but...
Any suggestions will be appreciated!
Just to let interested people know:
Customize operator's name
To show specified operator name set
HKLM\SOFTWARE\OEM\PhoneSetting\ONSDisplayRule=0 (DWORD decimal)
And then at
HKLM\SOFTWARE\Microsoft\RIL\Operator Names
add the code and the name to display. The value is 5 digits "CCCOO", where CCC is 3-digits country code, and OO is 2-digits operator's code. For example:
"25099"="BEE LINE"
For country and network code, go to wikipidea for mobile country code and network code
To show operator name based on the SIM card used (eg for cases where dual SIM adapter are used), set
HKLM\SOFTWARE\OEM\PhoneSetting\ONSDisplayRule=1 (DWORD decimal)
For my dual-SIM adaptor, when I switch between SIMs, the phone with default settings showed always one and the same name, until I reboot the device. Then, it was not able to retrieve operator's name from one of the SIM cards I use. Probably it is an adaptor fault. But anyway, after I changed ONSDisplayRule to 0 and set more up-to-date names for operators that I use, I now always see the name of the operator of the chosen SIM.
Click to expand...
Click to collapse
Found @ http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
when i first got my Audiovox SMT5600 however long ago, all it would show until one day was 310-410. i finally realized that this was simply the carrier's ID number, and can be fixed simply by going into the network settings and changing the preferred network to the actual carrier's name and not the number. i hope this helps, i havent had a problem since this happened, which was about 3 or 4 years ago.. i think it may have saved my settings onto my SIM card which is why.. anyway good luck
-Nstefanelli-
My gues is U had a bad flash, try reflashing again with diferent WM 5 ROM.Good luck.
thanks alot, man!
Related
This problem probably has an easy solution but I just cant figure it out.
So im Swedish and I ordered a tp2 Verizon and unlocked it with unlock program.
Got everything to work, gsm and umts.
But when I dial numbers ex: 070 65 11 65 (swedish cellphone number)
I see on the screen it adds (1) 070 65 11 65 wich I guess is the
american or english country code.
Now if I type in +46 (Swedish country code)
in front of the cell number and and subtract the 0
+46 70 65 11 65
Everything works.
But for convenience I don't want to have type in my country code for every
cell number.
How do I fix this?
Ive been in region settings on the phone and changed to Swedish.
Someone please help
settings. personal. phone. then i think gsm services
Thanks but it didn't work.
It seems logical the settings to change that would be there though.
I played around with settings on location setting in there. Didn't change anything.
The settings i have on gsm settins are the following:
Call barring
Caller ID
Voice mail and text messages
Pin/pin2
Location setting
tty mode
Time synchronizaion
Am I missing any settings?
I also tried rebooting in cdma mode without gsm sim card and changing
country to Sweden in the cdma settings. Then rebooting again with sim card in gsm
mode.
I didnt try this before but i can call local land line number no problems
but if i try a swedish cellphone number without country code it still
wants to add (1) in front of it.
So annoying.
Any ideas?
hklm-->software-->OEM-->phonesetting and then choose autoprepend_1 and change the "Data" value from 1 to 0.
Ok so im guessing that hklm means changing some registry setting.
I haven't done that before.
Can you recomend a good app for this?
Besides this do you think that this problem might be tied to
using a verizon stock rom and that verizon is an american operator?
If i change to an international rom later do you think I would have this problem?
I know of no international cdma roms. use phm regedit or even easier use CEregreditor from computer with phone connected by activesync.
I used resco explorer 2010,
I didnt have autopretend setting on Phonesetting.
I had something called assisted dialing, wich is something that comes up
whenever i dial a number it says above the number dialing (assisted dialing)
That setting seems to be on (1)
And I have audioredial no value set,
The rest is
Bandtype
Callbarring
CalledId
CallforwardingGsm
CallWaiting
CurrentCountrySetting (no value set)
DNDMode
EmergencyCallAlert
FDN
LocationSetting
NBCDSetting
NetworkService
NetworkType
OutOfCoverageAlert
PIN
RoamingAlert
SwicthNAM
TimeSync
TtyMode
VMailTextMSG
VoiceMail
VoicePrivacy
After a closer I look I found
ShowAutoPrependPage under phonesetting
I changed that value from 0 to 1 but nothing happend.
damn..
Rhodium 500,
thanks for your help and pointing me in the right direction.
Really appreciate it.
I disabled "Assisted Calling" in registry settings and that solved my problems
it was to easy
1-click the call button to see the dial keypad
2- click menu
3- choose global smart dialing
4- disable global smart dialing
5- press ok
abvmoose and others,
How do I turn on Assisted Dialing? I have no entries under HKLM-->SOFTWARE-->OEM-->PhoneSetting--> AssistedDialing?
Please let me know the entries in this folder so I can turn assisted dialing on.
Thanks!
Hi
I have an HTC Touch Cruise that I bought over the Internet. It has worked perfectly with the phone operator that I have been with for the last 5 years.
I changed my phone operator: Changed the SIM card . I see the name of the new company on the screen (top left). I can use the phone, but cannot send SMS's. On the Connections Tab in the Settings I accessed the Connection Setup and the name of the original opertor still appears. In the Comm manager I went into the Phone Settings and on the Services Tab I pressed "Get Settings" for all the services. On the Network Tab the Current network is that of the new operator. I pressed on FIND Network button and the SET Network buttons and it seems that the current network is that of the new one, yet a message appears "Connection Setup. The operator does not exist on the database. Please contact your operator for connection settings. Connection setup will redirect you to the Connections screen". This message has appeared from the moment I changed the SIM card. The new operator does not not know how to help me. Can someone point me in the right direction? What does it mean that the "operator does not exit in the database"? How can I make it appear on the database?
Thanks
Brian
I suggest you state your current operator and country. Maybe someone can share the settings you should key in. Another option is too google something like: youroperatorname internet or gprs settings (that's how I did it for my wife last month). I remember there is a specific thread here at xda dealing only with these kind of settings. Another option is to look for the lastest version of htconfiguration tool in case it is already there (maybe you use an "old" rom). Good luck
Hi Cruiserrr
Thanks for your quick response. The operator is Orange and the country is Israel. I'll Google what you suggested. I'm using the original ROM.Can you remember the thread?Where do I find if there is a new version of the htconfiguration tool and how will it help my situation? And how would I use it/
Thanks
Brian
I typed in google "gprs settings orange israel" and had lots of links. eg here at xda http://forum.xda-developers.com/showthread.php?t=218329. Maybe the first one does not work since the link maybe old. Try a few posts and you should be up and running in a few minutes.
htcconfiguration tool ??? I think I invented myself the name. I am referring to the same app you mentioned connectionsetup (htc made)-
this is the part of the forum where you should look for gprs settings http://forum.xda-developers.com/forumdisplay.php?f=262
Cruiserrr
Thanks for the info. I'll check out your leads in the morning and I'll let you know how it went.
Once again, Thanks
Brian
I use a analog dualsimholder. What i am searching since such a long time is a trick to show the IMSI code (or sim telephone number) on the tf3d todayscreen next to the operator name so i can see which sim is in use.
(Because my 2 sims are from the same network operator, on todayscreen the same network name is shown, and I can not decide which sim is in use).
I used to use the todayplugin from pelargonium, but this one only work on WM-todayscreen, not on tf3d.
Much better solution would be, if the used network operator and the sim number in use would be visible on the lockscreen.
Hope some dualsim users can help.
I use hd2- 1.66 rom
the boring solution until now is to:
1.) unlock phone
2.) use cookiemonster-plugin and made shortcut for sim-manager on homescreen. When opening sim manager i can see which sim number is in use.
But i would like to see which operater and which sim is in use with just one look on lockscreen when power up the phone
Something that's been bugging me for a while:
I have an unlocked Touch Diamond -- I once used another operator's SIM card while my number was being ported. Ever since, even after hard-resets, MTTY and many different ROMs and radios, Connection Setup has offered me two setup options: one for my network (Orange UK) and the other for the network I once used (Blyk).
So, even though I haven't used the Blyk SIM in months, I am still being offered connection settings for it automatically and the network doesn't exist anymore!
Does anyone know where this history of networks/APNs is stored and if there is a way to clear them? The only real solution as far as I can see is that they're stored on my Orange SIM, but I can't work out why it would store the Blyk settings...
Thanks.
Hey guys
I just got my SR unlocked and i am using it in India. Whenever i dial a number starting with '011' it considers it as an international number and shows the country name based on the digits following it. '011' is used in India for dialing to phone numbers in New Delhi whereas the international dialing prefix is either '00' or '+'.
For e.g., if i dial a number as '01140...' the phone shows Romania as the destination when its actually New Delhi!
Though there is no problem in connecting to the correct numbers, i would still like to change this.
Whats the best way? I read somewhere about a sub-menu under settings called 'assisted dialing', but it seems to be missing on the SR.
Should i flash a custom ROM?
candiesdoodle said:
Hey guys
I just got my SR unlocked and i am using it in India. Whenever i dial a number starting with '011' it considers it as an international number and shows the country name based on the digits following it. '011' is used in India for dialing to phone numbers in New Delhi whereas the international dialing prefix is either '00' or '+'.
For e.g., if i dial a number as '01140...' the phone shows Romania as the destination when its actually New Delhi!
Though there is no problem in connecting to the correct numbers, i would still like to change this.
Whats the best way? I read somewhere about a sub-menu under settings called 'assisted dialing', but it seems to be missing on the SR.
Should i flash a custom ROM?
Click to expand...
Click to collapse
When the calls go through, are you getting any additional charges through your carrier as if they are reading that the call is to Romania?
If it is not costing you any extra and still works but you want it to say the correct location, try flashing a different ROM just to see if it is different.
Maybe try Rogers or T-mobile based ROM instead of AT&T and see what happens.
candiesdoodle said:
Hey guys
I just got my SR unlocked and i am using it in India. Whenever i dial a number starting with '011' it considers it as an international number and shows the country name based on the digits following it. '011' is used in India for dialing to phone numbers in New Delhi whereas the international dialing prefix is either '00' or '+'.
For e.g., if i dial a number as '01140...' the phone shows Romania as the destination when its actually New Delhi!
Though there is no problem in connecting to the correct numbers, i would still like to change this.
Whats the best way? I read somewhere about a sub-menu under settings called 'assisted dialing', but it seems to be missing on the SR.
Should i flash a custom ROM?
Click to expand...
Click to collapse
If you are with Rogers and you took your Rogers SIM card, put it in, dial *611 (it's free globally) and get them to tell you what the hell is going on and how to fix it. No need to mention unlocked, rooted, ROM'd or anything, just say your problem and wait for a solution.
Isn't this due to the app that is installed that tells you the location of the number ringing you or that you are dialing?
I can't remember the name of the damn app, but its a trial and after a while it asks you to buy and if you don't it deactivates.
/system/app/CityID.apk
Interesting Post:
http://forum.xda-developers.com/showthread.php?t=1550305
/Sent from Aperture Science. You Monster.
Thanks guys.
The calls were not getting routed through any country. They were connecting just fine. It was only a display issue. I tried by replacing the AT&T radio with the Rogers Radio, but that didnt help.
Then i figured it could be because of the phone.apk file, but editing it would be complicated.
I dint really go down the path of looking at cityid.apk.
But then i flashed using the Rogers stock ROM and it solved the problem!
Thanks again!
This is for the sole reason that Rogers does not package CityID.apk in the 727r release.
Sent from Aperture Science. You Monster.