In "Microphone AGC" under "settings"..
evertime i tap "enable" and soft reset it goes back to "disable"..
does this happened to you all also?.. or this is a hardware related?..
Thanks..
just tell me wether you also have this problem.. means that im not alone having this problem.. maybe its general
Mine does this too... Even after a power off...
Noticed after installing various flavors of WM6...
Don't remember if it had the same behaviour under WM5.
I get same problem with wm5 instead!
it should be a registry settings.
Has anyone found a fix for this yet?
there was once a cabfile to do the fix.
i had it on every wm6 rom
and because only a few people use it - it is not fixed by default.
have a search on forum for agcfix
i will search my pc for the cab when i´m at home.
Me too !
Yep , I'm on mUn aRTM , and I also have the same issue . Can't remember whether I had the issue on WM6 Underground , but certainly not when on WM5 ( atleast after the reg tweak ! )
I've tried the reg tweak on WM6 mUn aRTM , but to no avail ! Seems DWORD 0 / 1 means nothing to my wizard anymore !
Any suggestions ?
Try this - worked on WM5
And send feedback.
papamopps said:
Try this - worked on WM5
And send feedback.
Click to expand...
Click to collapse
IT WORKS!! Thank you PapaMopps!!
badbert said:
IT WORKS!! Thank you PapaMopps!!
Click to expand...
Click to collapse
Glad to hear.
Thx
thanks, works great!
Does this do gain control in calls aswell?
Karzi said:
Does this do gain control in calls aswell?
Click to expand...
Click to collapse
It only makes it possible to set AGC control to enable in start - settings - agc
It isn´t able by default in all WM6 roms
Not to look a gift horse in the mouth, but how? How does it work, what does it do?
I tried to open it in winimage, can't. Tried to unrar it, can't????
badbert said:
Not to look a gift horse in the mouth, but how? How does it work, what does it do?
I tried to open it in winimage, can't. Tried to unrar it, can't????
Click to expand...
Click to collapse
Don´t know - was a present from internet - long time ago.
Don´t even know where it got it from - but my PC is more a litter box than a downloadarchiev.
Sorry - cannot help you with information.
papamopps said:
Don´t know - was a present from internet - long time ago.
Don´t even know where it got it from - but my PC is more a litter box than a downloadarchiev.
Sorry - cannot help you with information.
Click to expand...
Click to collapse
"Present from the Internet" What a great line! May I use it? My friends are always asking me where I get things!
badbert said:
"Present from the Internet" What a great line! May I use it? My friends are always asking me where I get things!
Click to expand...
Click to collapse
I´m a teacher - I have to find explains for my kids - not to lie and not telling the truth.
So jsts feel free.
badbert said:
Not to look a gift horse in the mouth, but how? How does it work, what does it do?
I tried to open it in winimage, can't. Tried to unrar it, can't????
Click to expand...
Click to collapse
All it does is replace a patched EXE file.
MicrophoneAGC.exe to be specific.
GldRush98 said:
All it does is replace a patched EXE file.
MicrophoneAGC.exe to be specific.
Click to expand...
Click to collapse
Thanx GldRush98! From what I could see, that was what I saw too...
Related
i just finish rebuild Smart dial for HTC himalayas now. :wink: 8)
Try my himalaya WM5 SmartDialing and tell me if some thing missing in it...
Sorry for the nested cab Nested Cab Fixed now... :wink:
(im using PhoneCanvas not generic phcanhtc) :roll:
nice all poeple is waithing for you :lol: :lol: :lol: :lol:
Sacaman
Great!!!Thanks so much
Mwilmar you are so great! I waited it for monthssss. I am downloading and try, will feed back. Thanks!!!
Re: OK i manage to rebuild Smart Dail for WM5 Himalaya...
mwilmar said:
i just finish rebuild Smart dial for HTC himalayas now. :wink: 8)
Try my himalaya WM5 SmartDialing and tell me if some thing missing in it...
Click to expand...
Click to collapse
hey there nice work but for some reason i cant find the file to download on the topic does anyone else have the same problem.
Re: OK i manage to rebuild Smart Dail for WM5 Himalaya...
scooby said:
mwilmar said:
i just finish rebuild Smart dial for HTC himalayas now. :wink: 8)
Try my himalaya WM5 SmartDialing and tell me if some thing missing in it...
Click to expand...
Click to collapse
hey there nice work but for some reason i cant find the file to download on the topic does anyone else have the same problem.
Click to expand...
Click to collapse
is there...
Great work mwilmar, it works perfectly for me!!! Maybe some new skins i can expect...
Works but missing Speed Dial button
Hi, it's great work.
Just wonder if it's possible to make display of Speed Dial button?
thks.
Re: Works but missing Speed Dial button
ferioz said:
Hi, it's great work.
Just wonder if it's possible to make display of Speed Dial button?
thks.
Click to expand...
Click to collapse
OK thank's bro now i fix it... just download it again... :wink:
You are superb. You are great mr Mwilmar. three cheers to you. You have given to us which was long cherished...chandra shekhar
Hi mwilmar,
Just downladed and installed your work. Great, many many thanks. All seems to work fine so far.
Regards - Mallow1
Here is a cool skin.
http://www.pdaphonehome.com/forums/showpost.php?p=491165&postcount=29
mwilmar,
When you rebuilt my .cab for Himalaya, you included one of my ealier test cabs for Sprint. So everyone installing this cab is also installing an earlier Sprint .cab.
It is called RevisedSmarDialingWM5(Sprint)noHTCSkins.cab and is being installed in your windows directory. You don't need or want this, you can delete it out of windows, as it is 420K in size.
You are also installing CDMA specific system event messages and icons. Maybe I should repost with an HTC generic set. Anyone willing to test?
-Paul
PH,
That's what we're here for... post it and I'll give it a spin.
Regards - Mallow1
You also used an earlier test version as the port. You are missing all of the Smartdialing registry keys.
Here is an updated version that should work on Himalaya with all CDMA stuff removed, registry keys added, etc.
Someone should remove the previous version and reinstall this one and let us know if it worked.
-Paul
Paul,
Downloaded yours but the prior cab hasn't fully uninstalled. Pause one while I get rid of the old one properly before I try to install yours.
Cheers - Mallow1
Any word from those who downloaded? Is it working correctly?
Still struggling to get rid of the old one and I don't want to install yours until I'm clean so that we know whether glitches are due to yours or Mwilmar's variant. Kean to hear from others who were clean to begin with!
Regards - Mallow1
Right, I tried the simple uninstall (Remove Program) and that didn't work so I've now deleted smartdiailing from \windows and removed any smartdial registry entries. Soft rest and tried to load yours but is it failing to install. I think more because of the prior installation than anything to do with your cab. Anymore I need to delete or any other ideas?
Regards - Mallow1
PS having removed smartdailing from Mwilmar's installation you mentioned a cab c 400k which would have loaded at the same time. what files do I need to delete to free that space up as I cannot locate "RevisedSmarDialingWM5(Sprint)noHTCSkins" or similar.
Paul_Hammons said:
Any word from those who downloaded? Is it working correctly?
Click to expand...
Click to collapse
hi!
i used my Himalaya WM5 1.5h <too old version right??
and made japanede Localized it.
This SmartDialer was worked fine, without any problem yet!
That was great work!
I tried to this many times in early day, but couldnt!
So happy now!
Thanks guys!
here is a capture of SmartDialer with Japanese dial pad!
http://asukal.seesaa.net/article/14550259.html
Paul_Hammons said:
Any word from those who downloaded? Is it working correctly?
Click to expand...
Click to collapse
It works ok. But what has made urs different besides the cab file size?
First off thanks to MuN for baserom and keyboard, double_ofour for his great kitchen, Faria for his Camera, Anichillus for the Microphone fix, Mfrazz for his settings OEM package and help, and nottoosmart for a few fixes.
The loader does hang on 100 percent and the WM6 Splash screen for a while. It's normal nothing is wrong.
There is no Splash Screnns, IPL SPL OR GSM..So it should work for G4s
I think I may be the youngest chef on XDA..I'm only 15.
This is an updated release to my current one
Included
Battery Status (Ver. 1.04.202) Beta 3
Camera App
Mun Keyboard
Microphone fix
Aero and Vista Black theme
Office 2k7
X-button 1.0 Version
10 Button Commanger
Live Search
MMS!
Pocker RAR
Removed
Transcriber
Enterprise
Auto update
VoIP
Catalog
Voice Command
Registry Hacks
Edge Icon
Wireless Today Plug in
Wireless G enabled
Pressing the End Call key does not disconnect GPRS
Louder Ring tone
Regional Settings for English
Keep cabs around after install
Memory
Storage
Total: 47.46
in use: 3.07
Free: 44.45
Program
Total: 51.96
in use: 18.80
Free: 33.16
Post any bugs you find post here or PM me thanks.
Password: Smartmodz.com
WM6 Pro Edition 2 with MS Live
FTP Mirror
WM6 Pro Edition 2 without MS Live
FTP Mirror
Is the PIE fixed ?
If I install it without MS Live will I have more free RAM ?
Yes and I didn't get to check the memory on the live version
ANTC said:
Yes and I didn't get to check the memory on the live version
Click to expand...
Click to collapse
Nive to see lot of WM6 versions
I'm going to test it in my loved 9100, but my new Hermes is now my normal PDA... i've 9100 only for backup and hermes maintenance support. It's like a active/passive cluster
Congratulations.
ANTC said:
Yes and I didn't get to check the memory on the live version
Click to expand...
Click to collapse
I flashed and PIE IS NOT FIXED, has the same problem what muns has ...
patek said:
I flashed and PIE IS NOT FIXED, has the same problem what muns has ...
Click to expand...
Click to collapse
whats the problem? Ive used it fine..there just no set homepage.
ANTC said:
whats the problem? Ive used it fine..there just no set homepage.
Click to expand...
Click to collapse
That is, I thought you fixed that.
why not set your own lol
ANTC said:
why not set your own lol
Click to expand...
Click to collapse
It is not a "setting home page question". If you would check this, you will see that some dll is missing. If flashed to your ROM because I thought it is the same then muns but with some fixes, among them the PIE fix. Thanks anyway, no problem
patek said:
It is not a "setting home page question". If you would check this, you will see that some dll is missing. If flashed to your ROM because I thought it is the same then muns but with some fixes, among them the PIE fix. Thanks anyway, no problem
Click to expand...
Click to collapse
double_ofour is the one who fixed it, I don't see whats wrong with it..I haven't had a problem
patek said:
That is, I thought you fixed that.
Click to expand...
Click to collapse
dude no need to be an ass about it. All you gotta do is choose your own homepage it's not that difficult rofl.
Thanks for your ROM i'ma try it in a few.
How is the battery Life with this rom?
Thanks for a great rom. I am trying this now but the password do not seem to work. Any suggestions?
does it work on o2 zinc g4
sir_rey said:
Thanks for a great rom. I am trying this now but the password do not seem to work. Any suggestions?
Click to expand...
Click to collapse
Make sure its "Smartmodz.com" without the ""
yes it will work on a G4 just use Shelltool by MuN
hey, i installed this rom and it seemed to work pretty well, but i wanted to try faria's.. i installed his, and i like it, but i like the keyboard on yours... how do i change that?
h4ck said:
hey, i installed this rom and it seemed to work pretty well, but i wanted to try faria's.. i installed his, and i like it, but i like the keyboard on yours... how do i change that?
Click to expand...
Click to collapse
rebuild his rom
hey ant c, i think i found a little bug crawlin around in the rom. dont know if it is just me or what. i have set up to access my wireless router at home. when i go through the comm manager and turn on wlan it picks up and connects no problem but, if i activate wlan from the icon on the today screen i can only find all of my neighbors routers which are locked. mine is nowhere to be found. like i said, dont know if it just me but you might want to take a look.
How are u activeing it from the today screen? the plugin??
from the icon on the top bar.
Is the 'Touch Settings' program a posible alternative for changing which programs are called up by the Videos and the Music button within the cube or is it specific to the Elf?
http://forum.xda-developers.com/showthread.php?t=324556
I'd really like to use CorePlayer for Videos, etc.
Thanks in advance for the help.
psargent said:
Is the 'Touch Settings' program a posible alternative for changing which programs are called up by the Videos and the Music button within the cube or is it specific to the Elf?
http://forum.xda-developers.com/showthread.php?t=324556
I'd really like to use CorePlayer for Videos, etc.
Thanks in advance for the help.
Click to expand...
Click to collapse
yea im pretty sure it'll work. dont have a device though to make sure
Nope, I tried it (all versions) and it won't even install - I get the "the program doesn't have sufficient system permissions" error message. Maybe someone will modify this app for the polaris - it seems like it would be useful since HHC doesn't customize the cube and this does.
** Bump **
I'm another Polaris user (well, it's on pre-order at the moment). This 'Touch Settings' program sounds like exactly what I was hoping to be able to use.
Is there any chance the program can be adapted to work on the Polaris? Can anyone hazard a guess from psargent's "the program doesn't have sufficient system permissions" when installing error message as to what the problem might be since I realise that it isn't reasonable to expect people like the author of this program to have every device at their disposal but if possible fixes can be suggested then maybe it can be fixed "blind"? I for one would be more than happy to validate any possible fixed version on a real device.
- Julian
Mine is on pre-order as well, and I would love to see this....
PoorlyDuck has some inspiring skins, and then there is this post, on a different site, that changes the cube to six sided.
Here is Poorlyducks post,
page 23 has the skins....
http://forum.xda-developers.com/showthread.php?p=1861287#post1861287
and here is the six sided cube, but only on a sprint touch i think.
http://forum.ppcgeeks.com/showthread.php?t=12798
just found both of those...still reading the vista cube post...
drools
psargent said:
Is the 'Touch Settings' program a posible alternative for changing which programs are called up by the Videos and the Music button within the cube or is it specific to the Elf?
http://forum.xda-developers.com/showthread.php?t=324556
I'd really like to use CorePlayer for Videos, etc.
Thanks in advance for the help.
Click to expand...
Click to collapse
I have posted a few different times to Carlos in the "Elf" forum regarding this topic. Unfortunately he has not responded. It would be nice to use this program versus making the neccessary adjustments to the registry manually. Just a note that permissions error I also received when trying to load to my Touch.
*Bump*
This would be great on the TC. I have found a few registry settings that look easy to change (for the 6 icon side), but a complete program would be better. It would be nice to have the media hub customized as well.
butzchan said:
This would be great on the TC. I have found a few registry settings that look easy to change (for the 6 icon side), but a complete program would be better. It would be nice to have the media hub customized as well.
Click to expand...
Click to collapse
Sorry to hijack the thread but can you point me to the registry change to get the 6 sided cube?
Nope
Hi all,
I´ve got a German Orbit 2 aka TC and as far as I can see it doesen´t work. After installing all necessary files manually (due to rights-limitations) I can start the programm, but it doesen´t recognize my MediaMinihub. I can change the Phoo/Video/Music cube-side, but that´s it.
Maybe its because I got a German ROM...?
sorry for that.
sl bb
mouseymousey said:
Sorry to hijack the thread but can you point me to the registry change to get the 6 sided cube?
Click to expand...
Click to collapse
PM sent.
Does anyone know what/where the registry settings are to point the HTC album to the storage card?
butzchan said:
PM sent.
Does anyone know what/where the registry settings are to point the HTC album to the storage card?
Click to expand...
Click to collapse
Click HTC album>click camera> click menu> click storage card and your done.
JulianL said:
This 'Touch Settings' program sounds like exactly what I was hoping to be able to use. Is there any chance the program can be adapted to work on the Polaris?
Can anyone hazard a guess from psargent's "the program doesn't have sufficient system permissions" when installing error message as to what the problem might be since I realise that it isn't reasonable to expect people like the author of this program to have every device at their disposal
Click to expand...
Click to collapse
Hi, I'm the author of Touch Settings and I would be very happy to work with the community to get it working on the Polaris.
The CAB install error you're getting is v interesting. Steps to take to try and cure this problem are:
1. The device may be app locked, you need to download a program called Device Security Manager, then with your Polaris connected to Activesync, disable all the security:
Look at this web page for more info.
2. Also, try installing the sdcerts if possible (again, see above web page)
3. Check Free Storage memory; lack of this can cause the problem.
Please can somebody try all the above with the NEW VERSION 2.22 OF TOUCH SETTINGS (http://forum.xda-developers.com/showthread.php?t=324556&goto=newpost)
If it doesn't work, I will upload a ZIP file of the individual files and we can try a manual installation.
Best
C
PS: I don't know an awful lot about security certs and device provisioning, so if any other developers can point me to a way of making the CAB install on the Polaris, please do.
carlosp_uk said:
Hi, I'm the author of Touch Settings and I would be very happy to work with the community to get it working on the Polaris.
The CAB install error you're getting is v interesting. Things to check first:
- Is the device app locked in some way: are the security certificates restrictive?
Look at THIS WEB PAGE: http://blogs.msdn.com/windowsmobile/archive/2007/05/30/all-about-application-locked.aspx
...download the Device Security Manager, dock your Polaris and disable all the security.
- Install the sdcerts if possible (again, see above web page)
- Check Free Storage memory; lack of this can cause the problem.
Please somebody try all the above with the NEW VERSION 2.22 OF TOUCH SETTINGS (http://forum.xda-developers.com/showthread.php?t=324556&goto=newpost)
If it doesn't work, I will upload a ZIP file of the individual files and we can try a manual installation.
Best
C
PS: I don't know an awful lot about security certs and device provisioning, so if any other developers can point me to a way of making the CAB install on the Polaris, please do.
Click to expand...
Click to collapse
Excellent Carlos....I was hoping you would take a look at this program for the Polaris!!
Thx
Hi carlos,
thx for your quick reply. It works like a charm now. I need now some "stylish" icons for my selected apps, but thats another problem.
Thx anyway for your great application.
well, on mine it really did not turn out that well....
The cube does not turn any more
all the icon show a black box
and I can't return to a functional version...
Please HELP!!!
tigerpower said:
The cube does not turn any more all the icon show a black box
and I can't return to a functional version...
Click to expand...
Click to collapse
Tigerpower
Sorry to hear you've had problems. If you hard reset your device, your cube should revert to normal. If you are unwilling to hard reset your device, then if somebody could post a registry dump from a Polaris (clean, hard reset device) then I can post a fix CAB for you!
C
It works
Thanks Carlos, the 2.22pre version works very nice on my Couise.
I have only question:
If I try to change APLauncher layout I get a mesage "It seems that your HTC Touch Software is not recent....", but I can change the apps grid. What the message exactly means? There is any newer HTC Touch Cube version than what is on Cruise installed?
Tnx
vtesar said:
Thanks Carlos, the 2.22pre version works very nice on my Couise.
I have only question:
If I try to change APLauncher layout I get a mesage "It seems that your HTC Touch Software is not recent....", but I can change the apps grid. What the message exactly means? There is any newer HTC Touch Cube version than what is on Cruise installed?
Tnx[/QUOTE
What is the "pre-version" 2.22? Im out of town so I cannot try yet..Is that version still expired?
Click to expand...
Click to collapse
vtesar said:
Thanks Carlos, the 2.22pre version works very nice on my Couise.
Click to expand...
Click to collapse
GREAT to hear! Thank you.
vtesar said:
I have only question:
If I try to change APLauncher layout I get a mesage "It seems that your HTC Touch Software is not recent...."
Click to expand...
Click to collapse
Hmm. ...very interesting. Well, I don't have a Cruise/Polaris, so I don't know!
Could somebody please please send me a registry dump? And, if possible, the files Biotouch.exe, Mediahubmini.exe, APLauncher.exe and QDialer.exe from \Windows\ on the device.
teride said:
What is the "pre-version" 2.22? Im out of town so I cannot try yet..Is that version still expired?
Click to expand...
Click to collapse
Hi teride
No, there is a new build now that does not expire, we're up to v2.24. You can download from www.fatattitude.com/software. Let me know if it works for you!
Hi all,
I've seen others looking for this here, and while looking for something else, found a large VGA HTC Home in an Athena AX7510 ROM. I've extracted it from the Athena's OEMAPPS package and created a separate package with the relevant registry entries.
http://rapidshare.com/files/128346384/PJC_HTCHome.rar ---- OEM Package
http://rapidshare.com/files/128745613/PJC_HTCHome.cab --- CAB Installation
Note 1 - CAB Updated 08/07/10 - fixed "single tab" issue with some ROMs.
Note 2 - No Media player yet - looking into that now...
Note 3 - WARNING - the CAB is unsigned, and apparently this means that on some ROMs it won't install correctly.
-PJC
download then, and waiting for master
Hi pjc007,
You may try QuickCab by fellow xda developer IABovine. Hope it works, haven't tried it yet.
Does this htc home solves freezing issues in UNI?
Hi
I would be very happy to test it soon as someone can convert it in a .cab file
But I´ve tried a lot of ROM´s and several different htc home applications and always the same, when I recieve a call my UNI freezes imediatly.
I´ll wait for more comments
Cheers
Gracias
catch-22 said:
Hi pjc007,
You may try QuickCab by fellow xda developer IABovine. Hope it works, haven't tried it yet.
Click to expand...
Click to collapse
Thanks - that "just worked" - it'll be great once he adds in shortcuts!
-PJC
Cant use wheather
Hi sorry to ask, but too many information, how can i use wheather tab? nothing happens when I try to select my city. the rest of the buttons same problem.
Already read all the posts and links but, I have to say honestly I´m kinda lost...
Any help would be apreciated!
It´s the first htc home I can use wothout incomming calls freezing!!!
Gracias
orb3000 said:
Hi sorry to ask, but too many information, how can i use wheather tab? nothing happens when I try to select my city. the rest of the buttons same problem.
Already read all the posts and links but, I have to say honestly I´m kinda lost...
Any help would be apreciated!
It´s the first htc home I can use wothout incomming calls freezing!!!
Gracias
Click to expand...
Click to collapse
Weather (and contacts) should now be working correctly. Please try the new CAB in post #1.
Let me know of any other problems.
Thanks,
PJC.
i hope this is not from mobility touch commander..
cause i downloaded from the other thread and it is..
my problem is it consumes up to 6mb of my ram using tomal 8.0 beta
HEY MAN GREAT JOB....AFTER INSTALLING THE CAB ALL ICON ARE MISSING EXECPT THE "HOME"....HARD RESET AND RE INSTALL AGAIN BUT THE RESULT STILL THE SAME
I'LL STICK WITH SNAPVUE PERFECTLY WORKED ON ALL UNI'S ROM'.
http://vidmes.com/xda/Uni/Tools/
lorgem said:
HEY MAN GREAT JOB....AFTER INSTALLING THE CAB ALL ICON ARE MISSING EXECPT THE "HOME"....HARD RESET AND RE INSTALL AGAIN BUT THE RESULT STILL THE SAME
I'LL STICK WITH SNAPVUE PERFECTLY WORKED ON ALL UNI'S ROM'.
http://vidmes.com/xda/Uni/Tools/
Click to expand...
Click to collapse
If all icons are missing the likelihood is the CAB couldn't update your registry properly (it isn't "signed") -- it's working as stated on my ROM (based on Tomal V7.7) which has security checking disabled.
-PJC
euclanville said:
i hope this is not from mobility touch commander..
cause i downloaded from the other thread and it is..
my problem is it consumes up to 6mb of my ram using tomal 8.0 beta
Click to expand...
Click to collapse
I took it from the Ahtena X7510 ROM, but as with ALL versions of HTC Home, it likely will use a large amount of memory.
(I'm looking into something else at the moment, so can't check).
-PJC
hmmm strange im using tomal v7.7 and v8.0 hard reset doesn't work i think the only solution is to reflash my uni.
Anyway great job
nice job...
BTW: chande the links in the first post.. you have cab on the oem link..
V3S said:
nice job...
BTW: chande the links in the first post.. you have cab on the oem link..
Click to expand...
Click to collapse
Ooops!! Swapped, so now correct...
-PJC
lorgem said:
hmmm strange im using tomal v7.7 and v8.0 hard reset doesn't work i think the only solution is to reflash my uni.
Anyway great job
Click to expand...
Click to collapse
Hmmmmm - I got the chance to test on a different ROM, and saw the same as you. HTC Home Customizer let me bring the other tabs back, and after a soft reset, it worked fine.
Let me know if you want HHC uploaded (I can't remember where I found it, sorry!).
-PJC
Somehow I can't get it to work. It installs fine (along with HTC Home Customiser) but it doesn't show on my today screen when I select it, even after a soft reset :/ any ideas?
No complete icons showing
Weather (and contacts) should now be working correctly. Please try the new CAB in post #1.
Let me know of any other problems.
Thanks,
PJC.
(Quote)
Hi PJC
I simply can´t see the rest of the icons...
What I´m doing wrong?
Thanks for your help!
Gracias
orb3000 said:
Weather (and contacts) should now be working correctly. Please try the new CAB in post #1.
Let me know of any other problems.
Thanks,
PJC.
(Quote)
Hi PJC
I simply can´t see the rest of the icons...
What I´m doing wrong?
Thanks for your help!
Gracias
Click to expand...
Click to collapse
As I mentioned earlier, I see this too with a different ROM. On further investigation, it seems that the registry value HKLM\SOFTWARE\HTC\HTCHome\Tabsettings is being set to '1'.
*DELETING* this setting from the registry worked for me, and all the tabs appeared.
I'll see if I can see if there's something wrong with the CAB, and if so I'll fix it and re-upload, but you should be OK by making that registry change.
-PJC
Its very closer like, this make lot of consumable memory, try to install at storage card, can do this?
As I mentioned earlier, I see this too with a different ROM. On further investigation, it seems that the registry value HKLM\SOFTWARE\HTC\HTCHome\Tabsettings is being set to '1'.
*DELETING* this setting from the registry worked for me, and all the tabs appeared.
I'll see if I can see if there's something wrong with the CAB, and if so I'll fix it and re-upload, but you should be OK by making that registry change.
-PJC (Quote)
Did you mean deleting this registry? or just the value of "1", in that case which number I should put?
Thanks a lot!
1-install the attached cab.
2-change HKCU\Software\Melodis\Midomi\midomiGU IDType from 3 to 1
3-soft reset
4-enjoy
It works like a charm on my Topaz.
NB: don't click on menu of the application, it closes it!
Cab available here: http://www.mediafire.com/?hqjnydoy23m
Cool, it works very well!
Thank you very much for this gem, I was looking for something like this since musicid is not working on wvga, works like a charm, have you tryed to find a song by singing? I can just say WOW
Thanks, works very well
Here's the needed registry change as a CAB file, for those not wanting to mess with the registry. Apply after installing Midomi.
hth
This works great, for those of us that aren't tone deaf...
It does what it has to, And even music none ever heard about, it finds
I listed this on the rollupthread
shamus said:
Thank you very much for this gem, I was looking for something like this since musicid is not working on wvga, works like a charm, have you tryed to find a song by singing? I can just say WOW
Click to expand...
Click to collapse
MusicID DOES work, there is a version that supports VGA (and WVGA). If you search the forum, there is a post somewhere with the relevant link.
I would be curious how does Midomi compare with MusicID in terms of successful finds. Does anyone know?
TinTin said:
Here's the needed registry change as a CAB file, for those not wanting to mess with the registry. Apply after installing Midomi.
hth
Click to expand...
Click to collapse
Thank you thank you.. Guys like me cant get registry editing down so this is great. Keep up all the great work guys.
Install anywhere, No need for registry edition
TinTin said:
Here's the needed registry change as a CAB file, for those not wanting to mess with the registry. Apply after installing Midomi.
hth
Click to expand...
Click to collapse
Try my version on my signature.
No need to modify the registry.
You can install on Device/Storage Card/Internal Storage/RAMdisk as your choice.
shiranmotha said:
Try my version on my signature.
No need to modify the registry.
You can install on Device/Storage Card/Internal Storage/RAMdisk as your choice.
Click to expand...
Click to collapse
Can You make an oem version?
Vernox701 said:
Can You make an oem version?
Click to expand...
Click to collapse
I'll do in a short time after my final MBBS exam.
I fixed the data connection setting in the original installation package, you can get it here. No need to mess with registry or patches after install.
moonman said:
I fixed the data connection setting in the original installation package, you can get it here. No need to mess with registry or patches after install.
Click to expand...
Click to collapse
Missed this post, but did have success with my Touch Pro 2 after changing the registry setting mentioned in the OP.
Hey, I installed the .cab manually did the reg edit. However, it wont identify the song, it gives me a network error.
It works when using wifi
Any suggestions
(p.s. that link in the post above about data connection does not load)
Man. said:
Hey, I installed the .cab manually did the reg edit. However, it wont identify the song, it gives me a network error.
It works when using wifi
Any suggestions
(p.s. that link in the post above about data connection does not load)
Click to expand...
Click to collapse
Same here. It works fine with wifi but not with 3g.
If you follow the instructions, change the key, it'll work on 3G. It does for me.
mrmckeb said:
If you follow the instructions, change the key, it'll work on 3G. It does for me.
Click to expand...
Click to collapse
I have changed the key, but it doesn't work. It tries to connect, but when connection is established it disconnects and the 'searching' screen shows up.
After that nothing happens..
Did not work for me on 3g, worked on wi-fi. However this one works on both
http://www.megaupload.com/?d=87P3C9RN
thepeoplesclub said:
Did not work for me on 3g, worked on wi-fi. However this one works on both
http://www.megaupload.com/?d=87P3C9RN
Click to expand...
Click to collapse
Is the programa suppose to estabish a 3G connenction by itself?
When I use it it tries to establish a connection but it stops after 2-3 seconds and it doesn't establish a connenction, meaning that no song can be found obviously.
If I establish a 3G connenction manually and then start up the program it does find the songs.
Does this happen to anyone else? Is there a fix for this? As in, that the programs itself establishes the data connention automatically?
Curious about your answers......