Related
I have an issue with my new XDA IQ smartphone and TomTom 5.2
I've moved from an XDA SP - basically put the tomtom memory card (with 5.2 working fine on the SP) into the XDA IQ.
It all installed fine and I have the application short cuts.
I've got the new IQ to recognise Tomtom GPS receiver.
When I start the application the disclaimer screen appears with the option "I agree".
Once selected Tomtom bombs out back to the "desktop" - the blue tooth that tomtom triggered is still enabled but then when I try and do anything with the phone, its really sluggish and unresponsive. A soft reset sorts this out.
I've tried tomtom support, but I guess that always asking too much
I've used the application unlock as described on this forum to allow any app to be installed, but again this has made no difference.
I guess thats it! - i'll be trying out other methods tonight so if i find a solution I will update the thread for others with similar problems.
Many Thanks!
Ive managed to fix the issue with this.
Created a new notepad text document - entered the path of the map file into the text document
\Storage Card\Great-Britain-Map\
*note - you may need to amend the above location to reflect your installation.
Saved the text document and renamed it
CurrentMap.dat
then use activesync explorer to move it to
\My Documents\TomTom
create the TomTom directory if it does not exsist.
Then it works!
IT WORKS!!!
I was having exatly the same problems with my tomtom.
I had recently updatet my Qtek 8310 with new rom, but nothing worked.
Then i tried, solomons trick, ( a couple of times) and it worked , only issue was there was no shortscuts, but that i created.
Mr Solomon, you're great!!!
Problmes with tomtom 5.2
im experienses problems with the software, i got it to work 2-3 times. but now tomtom chrashes...
i've done exactly as explines
can anyone help please
I have exactly the same problem on my Qtek 8310, after rom upgrade, tomtom doesn't work anymore Help please !!!
Up :?
try to open BT before launch TT
It WORKS !!!!!!!!!!!!!! Thanks a lot dude
Having problems aswell.
I've got the program (TomTom mobile 5 and maps on my SD card but how do i install it and get it to run?
I bet im been so dumb, thanks in advance for any help
Let my experience be a warning to others.
Have nothing to do with the xda exec, WM5 or Microsoft Activsync 4.1 until the software is sorted out.
At present it is all a complete nightmare.
I am now left with a very bulky mobile phone( I think although I am not sure of the bluetooth headset yet) with no contatcts or appointments and no syncronisation to my computer on which the Outlook file has been completely screwed.
I still have to carry ny trusty old xda II for all other purposes.
Brian Leach
hi
Have you tried using the beta activesync 4.2?
Bryson
Sorry I'm not brave enough.
If an officially approved Microsoft released program can screw up all the firewall and netwrok settings and destroy my Outllook file god knows what a beta might do.
Brian Leach
brian leach said:
Let my experience be a warning to others.
Have nothing to do with the xda exec, WM5 or Microsoft Activsync 4.1 until the software is sorted out.
At present it is all a complete nightmare.
I am now left with a very bulky mobile phone( I think although I am not sure of the bluetooth headset yet) with no contatcts or appointments and no syncronisation to my computer on which the Outlook file has been completely screwed.
I still have to carry ny trusty old xda II for all other purposes.
Brian Leach
Click to expand...
Click to collapse
Of the 3 things that you've mentioned (e.g. xda exec, WM5 or Microsoft Activsync 4.1), I'm going pretty well with two of those (e.g. WM5 or Microsoft Activsync 4.1). So, lets put the blame on xda exec?
i would look around int eh exec's settings under AS and see if it was set to sync using usb to the computer in question
hanmin said:
brian leach said:
Let my experience be a warning to others.
Have nothing to do with the xda exec, WM5 or Microsoft Activsync 4.1 until the software is sorted out.
At present it is all a complete nightmare.
I am now left with a very bulky mobile phone( I think although I am not sure of the bluetooth headset yet) with no contatcts or appointments and no syncronisation to my computer on which the Outlook file has been completely screwed.
I still have to carry ny trusty old xda II for all other purposes.
Brian Leach
Click to expand...
Click to collapse
Of the 3 things that you've mentioned (e.g. xda exec, WM5 or Microsoft Activsync 4.1), I'm going pretty well with two of those (e.g. WM5 or Microsoft Activsync 4.1). So, lets put the blame on xda exec?
Click to expand...
Click to collapse
What he said...he beat me to it.
Re
Rudegar
i would look around int eh exec's settings under AS and see if it was set to sync using usb to the computer in question
I would very much like to get that far!!
Re hanmin and The Brit
You must both be much cleverer than me if you have had no trouble with WM5 and 4.1. Could you possibly point me towards an idiot's guide please.
Incidentally 4.1 appears to work OK with my xda II running WM 2003 so I suppose it must be either WM5 or the Exec or both
Brian Leach
Brian,
It just worked "out of the box" without any configuration (other than ticking the boxes) or other messing around required.
In the office where I work there are 3 Prophets, 1 Wizard and a Charmer all WM5 and AS4.1 and nobody has any issues. My guess it's your Universal. :?
i'm using a universal .
with as4.1 and WM5
no problems here.
Just installed it and it works
and i sync 3 devices with it
1) compaq ipaq 3870 (wm2003)
2) Spv c500 (wm2003)
3) mda pro (qtec 9000)(wm2005)
It will be good if you could tell us what you are experiencing.. e.g. how you install your activesync, and what you see on the screen and what happened next..
I'm afraid it's a long story.
I first tried to connect with my laptop which had been happily syncing my xda II via AS 3.8 I think.
So I removed the xda pairing and then uninstalled AS 3.8.
I then installed AS 4.1 but when I attached the exec it came up as an unkown usb device.
I uninstalled and reinstalled a couple of times but could not get beyond this. By the way I'm running xp professional sp1.
I put the problem down to the computer retaining some xda II settings.
I therefore installed AS 4.1 on my desktop also xp pr sp1 which is WAN to the laptop.
The installation went alright and the exec was recognised and installed.
I set up the syncronisation and all went well although at some point I got the error message relating to a too large Outlook file which did not seem to be a problem for the syncing.
However all this would only work if I turned off Zone Alarm which I was not happy with and at this time I discovered that I could not move any files within Outlook folders or download any emails from my Yahoo account, each problem being met by an outlook file is locked message and an error messaage which I discovered meant that the pst file was corrupt.
In the meantime I had installed a couple of programs which I discovered were not compatible with WM5. At this point when switching on the machine I got two error messages one relating to Theme Refresh and I noticed that most of the system settings icons had been removed.
I therefore did a hard reset whereupon the error messages disappeared and the system settings returned. The Outlook file on the computer was/is still screwed.
However on reconnecting the exec I received the unknown usb devise error message I had become to regard as an old friend.
Turning to Zone Alarm if it is activated it blocks all attempts to download emails even though the three programs required by AS 4.1 have been given access. My conclusion is that it has screwed up the network settings in ZA.
Since then I have reinstalled the xda II on my laptop using AS 4.1 I should add and the syncronisation seems to be as normal as it has been for the llastt two years.
I have spent a lot of time since then trrying to export the parts of my Outlook file which was not backed up ( admittadely only a few days with a view to transferring across the pst file from the laptop and hoping it cures the problem.
Sorry it's such a rant but you can see how much ttime I've wasted to get to a worse postion than I started from.
One other point how the hell do I execute the voice speed dialler or disable it.
Having paired my Jabra BT 200 with the exec whenever I try to instigate a call the voice dialler activates gives an error message about no voice tag and then dies. I then have to press the talk button with the stylus to make the connection.
As I said before to my mind everything seems to have gone backwards with WM5 although looking at the posts on this and other forums there seems to be a balance between those who are happy with it and those like me who wish they had never seen it!!
Sorry but you did ask!!!
Brian Leach
Re Unknown USB Device.
I was having this error when having partnetships setup for both the M2000 and M5000.
I resolved this issue by making sure that before I connected a device I went into the File menu (in activesync), click on mobile device and make the device you want to sync is selected. Then connect.
Matt
Have you tried installing Sp2 as someone suggested in another thread?
At the risk of becoming boring I am pleased to report that I am almost back to where I started last Friday!!
I was able to extract most information from the "locked" Outlook pst file import this into the pst file on my laptop then copy this file back into the C drive on my desktop. Result Outlook working normally, Hurrah!
Am I brave enough to try loading Activsync 4.1 and syncing again? Not for a while I think.
Re SP2 I'm not going there unless I absolutely have to! This does not include trying get this heap of rubbish to work. I will merely revert to the good old xda II and use the exec as a hopeless mobile phone until the software catches up.
Incidentally I discovered another problem yesterday. The memory usage has changed from the xda II I understand and it now seems unlikely it will be of much use to me as I am pretty much up to capacity on that device. Still only on the contract for another year!!
To suggest using an SD card for programs as I have seen on one review is obviously nonsense. My TomTom navigator maps take two 1gb cards and that is without the program so the machine becomes useless as a GPS device amongst other things. Not even heavy enough to make a good paper weight but not far off!!
Doesn't seem to be much of an improvement over the xda II to me.
Sorry rant over.
Brian Leach
brian leach said:
Re SP2 I'm not going there unless I absolutely have to! This does not include trying get this heap of rubbish to work.
Brian Leach
Click to expand...
Click to collapse
Pure madness, you refuse to do the basic necessary steps to get the device working, then rant that it dosn't work. priceless.
I want to use linux software on my PC, it says I have to run a linux OS, but I don't want to do that, so as the software won't work under windows XP, it must be ****. LMAO
Proof of my long term belief, there is nothing wrong with the Universal except the people who use it.
Guess what I use an Exec with WM5 and AS 4.1 with a fully working firewall and everything works.
Sorry don't agree.
SP2 is NOT a basic step. See the numerous problems caused by this so called upgrade.
I don't accept the linux/xp analogy. These are completely different operating systems not versions of the same.
I am quite prepared to take some time to set up a product but so far I have wasted about five days getting nowhere.
This is a consumer product available to the general public you should not need to make major changes to your computer system to make it work properly.
In addition I have used an xda II for over two years vitually problem free.
I am pleased that your exec is working fine for you, you are obviously better at computers than I am.
My point is that in every respect the exec is a step back from the xda II for everything I want it to do.
If you're happy with it fine but I am in the process of sending mine back so that I can get back to the work I am supposed to be doing.
Brian Leach
i would do some tests on other computers to see if it will work on them
i mean of cause as is not without it's issues
but i would make sure other factors dident interfear before i put the sole blame on AS and or Exec
usb2.0 vs. usb1.1 settings could be the issues
rights and left over from older installs
the usual suspect is often the os and or 3th party programs and settings
like had a xp install which would allways reboot without a warrning when an external usb device hd or sd reader or camera was connected
reinstalled and never saw that issue again
brian leach said:
SP2 is NOT a basic step. See the numerous problems caused by this so called upgrade.
Click to expand...
Click to collapse
Ok, when SP2 hit the streets there were a few problems but with all the patches for the patch ( :? ) it's now settled down and is really stable. Do a full backup of your system and give it a try.
Thanks for the tips.
I am sure that what you say is correct.
It is almost certainly something to do with my particular setup, being a business network set up and administered by a reasonably competent but amateur computer man, but as it works just fine for me under SP1 I am reluctant to install SP2 just now to get a devise working which in all honesty is not as good as my xda II ( for my purposes I must stress, there may be improvements which don't affect me).
I blame myself for not doing enough research before taking the plunge. As everything I have read since indictaes that it is not the device for me.
In any event I am in the process of sending it back so it is no longer an issue.
Brian Leach
but if it is an usb2 vs. usb1.1 issue then you will have to make sure if you ever replace your xdaII that you dont just get the same issue
all new pda's are likely to come with usb2 from now on
hi everyone, ok iv succesfully managed to flash my new xda exec with jwrights rom (thankyou very much, im loving it!) what im curious about is, i have a rough idea CAB files are programs, but how do i install them exactly? also, i keep reading about registry tweaks, what are they and how do i do them? and finally, iv been playing with the voice command program, and it doesnt seem to work properly all the time, when i ask it to call someone it just shows me there nuame and number then goes back to today screen, is there another program i could install, or maybe im just doing it wrong!!
thankyou very much
Cab files are just run on your device - just double click threm and they will ask you wether to insyall in memory or storage caqrd, most are fine on the card but anything that runs on startup (eg today plugins) can cause problems if not imstalled on the device.
You need a registry editor to edit the registry, there are a few free ones but I use resco which comes with resco explorer.
For general WM questions head over to Modaco - this forum is for ROM hackers amd ROM related queries and Modaco is for general PPC and SmartPhone user queries.
HTH
ok, i think im getting it a bit now, i was wondering does anybody run wisbar with there crossbow rom? iv tried installing it but it just doesnt look right!!? could anyone be of some help?
Pugme said:
ok, i think im getting it a bit now, i was wondering does anybody run wisbar with there crossbow rom? iv tried installing it but it just doesnt look right!!? could anyone be of some help?
Click to expand...
Click to collapse
It will look odd until you install a skin, google for wisbar advance 2 skins vga
Hey guys,
This seems to come up a lot in just about every new ROM thread at one point or another so I just thought I'd throw it out there how I have got wm5torage to work on EVERY ROM I have tried (and I've tried just about all of them discounting the most recent ones as I haven't flashed in a while).
Basically all I have had to do to get it working is install Card Export II. You don't have to ever open it but I believe it comes with a driver update or something (don't ask me, maybe one of the cooks knows for sure) that makes the mass storage mode work on the Kaiser. Then just leave Card Export II on the device and use WM5torage as if Card Export wasn't there. Works like a charm every time, at least in my experience.
Hopefully I'm not double posting this and can help a few people out with this.
now this is good news now I will expiriment with this
my guess is that I only have to add ce2.dll and ce2ui.dll to windows folder and wm5torage should work I'll test it right away
I gave this a try. I copied ce2.dll and ce2ui.dll to \windows and then installed WM5Storage. After a soft-reset, I activated the link and connected my Tilt. My PC detected it as a USB mass storage and went through the installation process, but, then, after that my PC was unbearably slow until I deactivated the link. Same thing happened on my second try.
I made a cab form wm5torage with the dll's from Card Export I havn't tried the cab but it's working when I cooked it into my rom as a oem pack
try it an let me know if it works
Code:
[ATTACH]59865._xfImport[/ATTACH]
isn't working working for me... Installed - tried to start it - locked up my phone - soft reset - said it was going to install card export - 'failed to install' then 'sucessfully installed' - still no wm5 storage, it just locks up my phone - gullum rom
I just tried the cab and report the same stuff. It froze when activating wm5torage.
ok then it must be coocked into the rom
Calaelen313 said:
Hey guys,
This seems to come up a lot in just about every new ROM thread at one point or another so I just thought I'd throw it out there how I have got wm5torage to work on EVERY ROM I have tried (and I've tried just about all of them discounting the most recent ones as I haven't flashed in a while).
Basically all I have had to do to get it working is install Card Export II. You don't have to ever open it but I believe it comes with a driver update or something (don't ask me, maybe one of the cooks knows for sure) that makes the mass storage mode work on the Kaiser. Then just leave Card Export II on the device and use WM5torage as if Card Export wasn't there. Works like a charm every time, at least in my experience.
Hopefully I'm not double posting this and can help a few people out with this.
Click to expand...
Click to collapse
I do the samething...but has anyone tried to see if it still works after the trial period expires...the reason why I haven't tried that is because i'm always reflashing my device almost every other week and never had the trial version expire since I always re-install from scratch...
c'mon guys, why are you opening the same issue? why don't you better search!? it has been already solved, we know, that WM5torage is working when CE2 is installed.. also know, that MW5torage will work, when CE2 trial is expired. as far, as i tested - CE2 NEEDS to be installed to have WM5 working - you can not just copy files into windows. it will not work (at least on kaiser)!
Hey, I apologized in the first post in the event that I was double posting a solution. I did do a search before posting it but posted for two reasons:
1. When I did search I did not find this particular solution (upon a second search I did find it but I had to read through a thread a bit before I got to it).
2. As mentioned in my first paragraph, this issue is CONSTANTLY coming back up, be it in the form of a new thread or in the form of 40+ people spamming up a perfectly good release thread with "WM5torage doesn't work, has anyone else got it to work!!!!!" making it harder to find legitimate information about a new ROM release.
I understand that the forums are getting increasingly cluttered with unnecessary threads/posts, but please refrain from "Use the search tool!" posts and thereby adding to the clutter. Yes, we all know by now that the search tool is available. No, we don't always find what we're looking for when we use it, especially when our answers are on page 43 of the thread (no, mine wasn't in this case but we've all been in that situation). If you really want to help with this issue, submit a link to the post that has the solution. If you don't have time to do that, great, send a PM to the person who opened the thread and let them know that the issue has been solved previously and they can direct people to the right thread. Otherwise, just let the thread die as it will inevitably do if it is not necessary.
Sorry again for adding to the mess.
Sorry, but I just tried that (Official HTC rom, installed WM5torage, soft-reset, installed cardexport II, soft reset), but still not working
It is working with cardExport II, so I would guess that WM5torage is not using the right dlls
Somebody mentionned that already and was telling that it must be on a cooked rom ?? Which rom would allow that ?
don't know how to get it working. I spent a while trying to get it to work, and then I just gave up. I could never get it to work at all. I have CardExport working in trial mode, but I didn't want to pay for it. Its best just to move on from this unless you find a rom with it built in already...which I never have found. ROMeOS was going to try to do it once, but that project has been discontinued.
Jason
Somebody must have been in a simular situation to this: My main computer went to the land of fried cpu's and until money and time permit I am stuck running Win98 on an old laptop (a good exercise in humility )..
So my question is, how do you get a wm6 PDA (running the blackdiamond rom myself) to "talk to the pc"? Win98 will only run Activesync up to 3.8, and thus when I connect from Wm6 I get an "upgrade Activesync on your destktop message". This is not an option. Was wondering if I could install Activesync 3.8 on the PDA, but can't find any cabs or so anywhere... Tried finding third party software (Soti, etc) but none will run on win98.
Maybe a stupid question, but after hours and hours searching the forums and googling about I still haven't found an answer... Oh, and I'm not even interested in "syncing" mainly just transfering files.
Any tips would be greatly appreciated!
If you just need to move files back and forth, you should be able to do that over infrared, that doesn't require Activesync. Even an older laptop should have an IR port.
Hmm- looks closely at computer- indeed it does! Never used IR for anything so I didn't think of that Will give it a try! Thnx!