Related
I am trying to install nghianga's rom, but anytime the installation ends normal (seems to), but the S200 only ends up in bootloader mode and whatever I try, it doesn't change. I have read a few posts about this problem, but I did't find any solution.
I know that I am not an experienced Prophet user, but I would like to have some installation help with this. Also I can't find the NB_Update_nghianga rom, maybe it works better with this one.
thx
The same for me.... please can help us?
You MUST downgrade to a relevant v2.2 ROM first, then upgrade
JD
Sorry JD, I tried this too, no success!
Maybe try going back to a 2.2 and try then to install smart1's Excellent clean rom and see if this works, then think about the other rom?
JD
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Don't forget this is a WM6 file, there will be a lot of programs that do not run correctly, this is not a problem of the rom, but more a problem of the software you are trying to install. Try to play with the ROM clean after a hard reset and install a little at a time
HTH
JD
eddyve said:
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Click to expand...
Click to collapse
Hi JD, I nderstand the WM6 issue, but a number of problems are really bgging me:
1) sync doesn't work and even more erased everything on my device
2) IR does not work, I bought a Prophet to se IR
3) when I tried to add a number in speed dial I receive a message that there is not enough memory available!
4) etc.
thx anyway for your response
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
step 1. Read more carefully the sticky post
user0000 said:
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
Click to expand...
Click to collapse
You're not unlocked. You actually skipped the first and very important step of flashing back to an older ROM to get your IPL/SPL to an earlier version.
Follow these instructions VERY carefully and don't skip over any parts at all. Read through it once or twice before starting any of the steps.
(these instructions are for G3 devices, for G4, go here)
Good luck!
Thanks for the help guys.I'm managed to come right with the ShellTools app.
The only problem I've had with WM6 is that when I click on the contacts soft button (or click it from the menu) it starts loading then disappears. I can't access it at all. Everything else seems fine though. Any ideas?
I remember that fault occurring with some of the roms though I dont specifically remember which rom, possibly some of the 318 builds. From memory I fixed this by doing another hard reset.
Thanks for al the assistance. I've flashed the XDA Mobile 6 Release 2a and am very happy.
WM6 has much much better wireless lan support. With the stock standard wm5 my kjam wouldn't connect to my WAP2 configured network, now it work! Great job on packing the Roms guys.
On the matter of the the contact not appearing / working. The following would happen: Once WM6 was flashed, and a hard reset done the usual process of initialization took place, which included screen alignment, time and time zone configuration, setting of a password and then the part that seemed to be causing the problems, the setting up for a email account/messageing. I on numerous occations skipped the setting up for email as I won't do email on the device. Once 'botted' the device would work fine with the new ROM the only problem would be that when I pressed the 'contacts' soft key or selected it from the menu the contact 'application' would seen to start up but die or6 not appear. This means that the title/top bar would display the title of the contact application but would in a fraction of a second die / abort / crash.
I assume that the email / messaging part of the hardboot startup sets up something that is required for the contacts application. Just for reference I just setup the email/messaging details (name, email address, pop server, username & password). After setup I didn't check email once, I then just deleted the email account setup and the contacts app is still working.
For newbees, I recommend the ShellTool applications, it allowed a new Wizard owner and newbee rom flasher to get a new rom flashed very easlily. My Wizard was a G4 with the 'recent' IPL/ISL bits so I can't speak for G3 users.
Nice one guys, great forum. I'm verry happy with my WM6 kjam.
Hi, I've a vodefone v1240 (HTC Tornado), i've tried to flash wm6 flash to it... but... i haven't super cid unlock... the flash is ok but phone always star in muticolor screen (botloader screen), i've tried to flash a lot of flashes but always get invalid vendor id or "only upgrade"... i've tried too with TyphoonNbfTool to edit nbf and change vendor id.. but always get the same mensaje ("invalid vendor id" or "only upgrade")...
How can i recover my phone? :S
Thanks
Sendoa
Determine your original CID first, to do this type:
Code:
info 2
into mtty or teratermpro and paste the output in the thread
Phil
Ahh, there you are ! Are you or duke_Stix still planning to cook some newer ROMs or remove bugs from the existing one ? We hardly see you guys around there days
i get this... what is the original CID? ¿?
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3CE40000 Bytes
HTCSVODA0504 㱍dHTCE
Cmd>
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Changelog:
HTC Task Manager inc
HTC File Manager inc
Application Unlocked
Fixed WiFi
HTC Comm Manager inc
Removed Wireless Manager
Removed Debug Apps
Removed Marketplace
Removed Office
Removed Voice Command,
Removed Windows Update,
Added Bluetooth DUN support for TomTom compatibility
Added Bluetooth FTP protocol
Extra's (as a separate download)
Office
MMS (semi working)
HTC Clear Storage
Jeodek Java
Button fixes
xT9 (for those who prefer it over standard T9)
xT9 lang packs (split into separate languages)
TCPMP
wm5torage
VoIp
Localisations:
Polish
Czech
Russian
However at the moment I'm having issues with initflashfiles.dat, once these are sorted, it will probably be released the same day.
Back to the topic:
Ok, using typhoonnbftool v0.41 open up a tornado nbf (wm6 or official, it doesnt matter) and then edit the header data so that the Operator field reads:
Code:
VODA0504
That is your original CID
Then save the nbf and flash it to your device
Phil
done but...
Hi, i've done but... always get a "only upgrade"... only let me to reflash wm6 flash.. but it always return to bootloader screen :S what am i doing wrong? :S
Thanks anyway
Sendoa
Try adjusting the version numbers to something ridiculous like 99.99.99.99 as well
Phil
jm012a9749 said:
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Phil
Click to expand...
Click to collapse
Hey Phil, Thanks very much for the update ! Your hard work is much appreciated here !!
Me too
I'm having the same problem as Sendoa. I flashed the WM6 ROM to my 8310but after 100% completion, the phone re-started in bootloader mode.
I can flash it again with the WM6 but the same thing happens each time (bootloader mode). I've tried to flash with several other ROMs but each time I get the "Invalid Vendor ID" error before flashing begins.
I've tried the Typhoonnbftool tool to change the header as suggested earlier in this thread but without any success. My CID is 'DNG_0501'. I'm still stuck in bootloader mode.
I'd appreciate any assistance.
Thanks,
Straker.
Sorted
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Solved
Thanks to all
I flash it with a cingular flash with version changed to 79.79.79.79 and operator changed to VODA0504, and work again.. then i've unlock the cid and flash wm6 flash and it is working with it
Thanks again
Wow, that's cool, means I can flash my phone to WM6 without voiding my warranty ( I still got 5 months left )
lomanasq said:
Here, here they are:
cancer awareness ribbon
Click to expand...
Click to collapse
ban this MOTHA F**&&
Straker said:
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Click to expand...
Click to collapse
where did you get your flash from?
typhoonnbftool is creating only 1kb file of nk.nbf
Hi,
I have the new typhoonnbftool got it from sourceforge when i try to edit headers of a Imate rom to make it for xpa swisscom v1240 with the CID "VODA0505" i get only 1kb nbf file i try lots of thinks but no luck at all.
kind regards
Fakbrenjeri
Similar problem
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Small nbf
Straker,
Where did you get the rom that worked?
timwb said:
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Click to expand...
Click to collapse
use typhoon tools 0.4.1...
ftp://ftp.xda-developers.com/Uploads/Smartphone/Tornado/Shipped_Complete_Updates/I-mate
use the rom from here..
Stuck on BootLoader
I there!
I've tried everything that I could find here and still no luck...:-\
I've an SPV C600 and when I upload the Imate ROM it stays stuck on the BootLoader.
It only works if I upload the Orange Upgrade ROM...
I can't SuperCID it, since no app as worked till now...
What can I do?
Thank you!
try this:
http://forum.xda-developers.com/showthread.php?t=285344
Please help help........
yesterday, I flashed my wizard ipl&spl to 3.08 and flashed the rom wizflo 2D again, then bad things occurred, some shortcuts in the programs cannot be opened ,and it displayed " (The file battleship cannot be opened with a trusted certificate,or one of its component cannot be found.If the problem persists,try reinstalling or restoring this file.) " but some of the "xxx.exe" software can only be opened in SDcard. Then i flashed the rom back to Mobile 5.0 but the problem still persisted . please help , Thank you very much !~~~~
try flashing the 2.26 ipl spl.
it could be that the programs you installed to the storage card may not work anymore because they do not have the nessesary registry entries. some programs that get installed to storage card have a few files installed on to device. if those files and reg entries are no longer there, then the app will not function.
windows mobile 5 has security enabled for unsigned apps. most of the roms that we cook have a package called "security off" which is incorporated in to the rom one way or the other.
If this is not the issue, then post more details.
S.V.I said:
try flashing the 2.26 ipl spl.
it could be that the programs you installed to the storage card may not work anymore because they do not have the nessesary registry entries. some programs that get installed to storage card have a few files installed on to device. if those files and reg entries are no longer there, then the app will not function.
windows mobile 5 has security enabled for unsigned apps. most of the roms that we cook have a package called "security off" which is incorporated in to the rom one way or the other.
If this is not the issue, then post more details.
Click to expand...
Click to collapse
S.V.I:
I'm really appreciate for your help, I have just flashed 2.26 SPL&IPL and hardreset, but problem was not solved . for instance" after flashed 2.26 spl , i again installed the Xtra Games.CAB(which i download from CR86 Touch HD Expansion_Pack_02) into device(not sdcard), but the battleship still cannot be opened . the "xxx.exe"(not .CAB) software such as " HandDee.GTuner.v1.2.1,, PhoenixStudio.1.1" which I download from web are all registered. and I put them in sdcard and send shortcut to programs, they all worked normally before yesterday. And yesterday after the problem occurred , I have tried format the SDcard and first flashed the OS back to TNT 1933 then flashed back to windows mobile 5 custom-ruu-wizard-1050412-wwe-101-11210wwe.. The problem was all persisted..... now i don't konw what to do & so worried...
Thanks you very much S.V.I
problems have been solved
Ha ha.....
This morning, when i used Lokiwiz02 to unlock my wizard before flashing rom, I noticed an error display when CID unlocking,and I unlocked again, it still displayed the error, then I searched Lokiwiz03a at wiki.xda http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
then its unlocked correctly,and i flashed the OS again, Finally the shortcut problem didn't exist, it works allright now!
recommend a good RMVB Plugin for Windows Media Player, This Plugin was extracted from N800, I download it from here http://www.aray.cn/archives/2306 and tested, it works good !
yzy503cx said:
Please help help........
yesterday, I flashed my wizard ipl&spl to 3.08 and flashed the rom wizflo 2D again, then bad things occurred, some shortcuts in the programs cannot be opened ,and it displayed " (The file battleship cannot be opened with a trusted certificate,or one of its component cannot be found.If the problem persists,try reinstalling or restoring this file.) " but some of the "xxx.exe" software can only be opened in SDcard. Then i flashed the rom back to Mobile 5.0 but the problem still persisted . please help , Thank you very much !~~~~
Click to expand...
Click to collapse
Try myExtensions
Hi everyone,
it' my first messagg over here but i read you all the times, it's the most powerful forum i've ever heard, But now, I need you because I have a problem with my phone.
Well, some weeks ago I installed on my device Nexus S Europe (model version, I9023 i think) a custom rom called Nexus Beam, faboulus let's say, ICS, battery drain , never had problem...but a day all the processes started to crash, system.android.process, system.android.markert, etc ...let's say: all the processes, so i thought: "reboot" , it has always been so useful. Not this time...i rebooted the phone and again after 2-3 housrs of usage, the same crashes.
So i decided to put on it the latest MIUI rom (2.3.30)...everything was wonderful, everything was so speedy that "wowww" but again...2-3 hours of usage the same error messages...rebooted again, and..."Google" text for ever!!
SO agaia, deleted EVERYTHING from my sd card, i've done all the kind of formatting thing proposed by cwm (data, system, boot, cache), then tryed to flash an older version on MIUI with Gingerbread. Same stuff! after one hourse the same errors and now i really don't know what to do.
I've tried everytinhg but i'm always on the Google texct while the system is trying to reboot. Tried also with fastboot but it doesn't recognize the device.
Please, can you give me some suggestions?"! I'm really, resperate!!
Just for knowledge, attached here you can find the error i got for all the applications installed on my device. It's always the same, and change only the name of the app:
app_vercode:15
device_model:crespo
build_version:2.3.30
condition:1
processName:com.android.calendar
pid:3280
uid:10006
tag:null
shortMsg:android.database.sqlite.SQLiteException
longMsg:android.database.sqlite.SQLiteException: attempt to write a readonly database
stackTrace:java.lang.RuntimeException: An error occured while executing doInBackground()
at android.os.AsyncTask$3.done(AsyncTask.java:278)
at java.util.concurrent.FutureTask$Sync.innerSetExcep tion(FutureTask.java:273)
at java.util.concurrent.FutureTask.setException(Futur eTask.java:124)
at java.util.concurrent.FutureTask$Sync.innerRun(Futu reTask.java:307)
at java.util.concurrent.FutureTask.run(FutureTask.jav a:137)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1076)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:569)
at java.lang.Thread.run(Thread.java:856)
Caused by: android.database.sqlite.SQLiteException: attempt to write a readonly database
at android.database.DatabaseUtils.readExceptionFromPa rcel(DatabaseUtils.java:179)
at android.database.DatabaseUtils.readExceptionFromPa rcel(DatabaseUtils.java:135)
at android.content.ContentProviderProxy.query(Content ProviderNative.java:358)
at android.content.ContentResolver.query(ContentResol ver.java:311)
at android.content.CursorLoader.loadInBackground(Curs orLoader.java:56)
at android.content.CursorLoader.loadInBackground(Curs orLoader.java:42)
at android.content.AsyncTaskLoader.onLoadInBackground (AsyncTaskLoader.java:255)
at android.content.AsyncTaskLoader$LoadTask.doInBackg round(AsyncTaskLoader.java:66)
at android.content.AsyncTaskLoader$LoadTask.doInBackg round(AsyncTaskLoader.java:55)
at android.os.AsyncTask$2.call(AsyncTask.java:264)
at java.util.concurrent.FutureTask$Sync.innerRun(Futu reTask.java:305)
It would be really great if you could help me!
Thank you so much and happy easter to everyone!