Hi,
I've flashed to windows mobile 6.1 and am stuck with a QWERTY keyboard layout. How can I switch it to an AZERTY ? I've added the Local string that works for WM6 but it doesn't seem to in WM6.1. Any ideas or tricks I may have missed out whilst searching ?
Regards,
Axet
Hi !
I'm using schap's Advanced Configuration Tool to do it:
http://forum.xda-developers.com/showthread.php?t=359380
Bye
Just tried and it didn't work. Are you certain that you are using a WM 6.1 rom and not a WM6 rom ?
I install this soft too :
http://forum.xda-developers.com/showthread.php?t=345426
I'm using ROM 6.03 with Radio 1.64 and it works !!
Tried that too but it hasn't worked (yes, I have performed a soft reset on the phone after installing). My phone is running WM6.1, CE OS 5.2.19170 (Build 19170.1.0.0). I installed Sleuth's WWE 3.0 ROM.
Well, i am french too, and i have a kaiser too and i can assure you that the cabs inside the thread listed above are indeed working with the rom, Sleuth 3.0, installed on my device.
I think you're in for a hard-reset.
Hi,
I am also looking for the azerty hardward keyboard, thus french, but well the Belgian French Azerty keyboard... Can anyone help me with that ?
I am using Dutty's DualTouch V4 RTM...
Thanks in advance...
It's buried somewhere in the following thread: http://forum.xda-developers.com/showthread.php?t=365066
Check out the posts from the last 4-5 days, it should be in there somewhere but can't locate it directly. The post contains the registry keys that you need to change. Good luck!
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Axet said:
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Click to expand...
Click to collapse
I have the same issue :-(
Changed registery settings as indicated. Now nothing works (not a single button). Even the red and green buttons. Help
perform a hard reset to get back to how it was before.
anyone know how to fix the "fn + space" combination ?
Axet said:
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
...(Shap's Advanced Config 2.1 XML will permit to do easily the trick)
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
anyone have an idea ?
Strange Behavior
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
divine_engineer said:
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
+soft reset.
As said, you can customize the Shap's 2.1 XML to permit modifying this options (Shap's standard DON'T do the trick on kaizer!)
Axet said:
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
Click to expand...
Click to collapse
Anyone ?
Hi,
I recently upgrage my TyTN II (originally a Orange Swiss ROM) with the new 6.1 upgrade.
With the previous official WM 6.0 Rom, I had to tweak the registry to have my QWERTZ keyboard working with the following key :
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD], layout key to 0407
With this new 6.1 ROM, I can't find this key anymore and Kaiser Tweaks or Schaps advanced config can't change it either.
Anyone to change my keyboard to QWERTZ with WM 6.1 ? Thanks a lot that would be much appreciated !
I also have this problem and it bugs me quite a lot...
I now have the official 6.1 english update setuped, and I found no way to set the keyboard layout back to qwertz.
I tried to toy as suggested with HKCU\Keyboard layout\preload\ but it completely crashed the keyboard ;-/
The key seems to be here in 6.1:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
I modified CurLang to 407 in hexadecimal (or 1031 in decimal) and it's working perfectly!
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Mastersey said:
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Click to expand...
Click to collapse
You might want to ask some help in your ROM thread!
Hey!
Anyone knows how I can get my Swedish keyboard layout back? I changed to a custom ROM I found here and after that all my Fn buttons are screwed up and åäö doesn't work at all.
___
HTC TyTN II
Swedish kayboard layout
tsaros-se said:
The hardware keyboard is a easy regedit to make it swedish,
HKLM\HARDWARE\DEVICEMAP\KEYBD\
Change CurLang to 1044 and softreset for swedish hardware keys.
Click to expand...
Click to collapse
(I think you should see the original value 1033 (for English keyboard layout)
Just use Regedit or Total Commander to find this registry key, change it, and use your stylus to soft reset your Kaiser and you should be good to go.
Although I am from Czech Republic, I faced the same problem that the keyboard had English layout (actually not a big deal because the only difference is in mapping the "z" key to be "y" and vice versa). I changed this value to 1031 (which is the Czech keyboard layout) and after softreset it worksperfect as it should.
If not I suggest reading through http://forum.xda-developers.com/showthread.php?t=496197
or http://forum.xda-developers.com/showthread.php?p=4885879
u can use AEKMap
Hello!
I have manage to fix the norwegian letters for te keypad but i still need som tips about some good phonepad with norwegian letters.
don't use wm6.5 but would assume wm6 phonepads works just fine
I use phonepad and it works great with danish t9
search for it think I found the cab in a thread somewhere in blackstone
Hey!
I found a Way to use the Hardware Keyboard in foreign Language Roms.
My Problem was that I have a German Keyboard (QWERTZ) and in WWE 6.5 Roms some Keys are different.
To solve this Problem all you have to do is to set the following Reg Key:
HKCU\keyboard layout\MUI\CurLang
I set the Value to 1031(dez) or 407(hex)
After a Softreset the Hardware Keyboard works perfect.
http://forum.xda-developers.com/showthread.php?t=522038