Related
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it
hey folks,
Does anyone know if anyone has extracted the radio from the latest Cingular 2125 (Faraday) ROM (version 2.0.13.0, from the HTCamerica website)?
I like the qtek 2.0.9.0 ROM, but I am running on Cingular network, and it would be nice to try that radio version. I'd rather not use the ROM, because I'd have to fool with it to reactivate wifi and a whole lot of other modifications.
thanks!
Do you have the download address? Please show me the address, I can extract the radio for you.
wow! thank you very much, here is the link...
http://www.america.htc.com/support/2125/software-downloads.html
good luck, and thanks again!
bluehanson said:
Do you have the download address? Please show me the address, I can extract the radio for you.
Click to expand...
Click to collapse
can you post the instructions please? It can be helpfull for others.
instructions...
Hey,
in a previous post/different thread, sp3dev posted the following instructions to extract the radio ROM from a full update, and reinsert the file into an updating package to install...I have never done anything of this nature, but I have used extracted ROMs to update a smartphone. The tools are all posted on xda-developers, and spv-developers, but I am just not sure how to use any of them.
Instructions:
so, goto spv-developers, find info how to setup perl and typhoonnbfdecode.pl. then, unpack the update with winrar, open nk.nbf with typhoonnbftools 0.4, select gsm, select extract decrypted, then save as gsm.n_d
then, use
typhoonnbfdecode.pl -r gsm=gsm.n_d -t -c radio.nbf. then, open radio.nbf with nbf tools and remove cdl___02 and save nbf into the folder with romupdate.exe enterbootloader.exe ruugetinfo.exe ruuresource.dll. run romupdate.exe and flash.
and i advise you to set supercid.
Here are more instructions for setting up perl and typhoonnbfdecode:
http://wiki.xda-developers.com/index.php?pagename=RomTools/typhoonnbfdecode.pl
Can you post the extracted radio rom Plz...
hardcore technie help needed
hey, ok I got the tools working. I have extracted radio roms from a couple of old qtek ROM updates. however, I am having problems with the cingular 2.0.13.0 ROM. I can extract the GSM component using typhoonnbftools, when I try to convert using typhoonnbfdecode.pl, the resulting file is empty. Any ideas?
Sorry I cant give you an answer to your question but I take advantage of your post to ask you one:
when I try to run the Perl script, it gives me runtime error when it tries to load the DES dll:
"R6034 An application has made an attempt to load the C runtime library incorrectily"
Did you had any similar problems to run the tool ?
Hello,
I did get a similar error, though I can't remember the exact syntax. If you are using Activeperl, add the following PPM repository, and install all the packages there. I think that should clear up this particular error...
http://www.soulcage.net/ppds/ppds.58/
I don't know, though...maybe this repository is bad? I have absolutely no experience with perl or programming, so I don't know how to tell. It might be worth trying to find a different repository with the crypt/des package?
Thanks. The repo link solved my problem !
dragonii said:
Thanks. The repo link solved my problem !
Click to expand...
Click to collapse
Hey, were you able to create a radio.nbf from the cingular ROM? Even after isntalling those perl packages, the resulting radio.nbf file was empty . If you've got it, would you mind please posting it?
Hello All,
Please post the radio rom if any one has extracted... Thanks...
hi all
i have a Pandora's Kitchen and i want to put some cabs on extended rom then enable it
is there any idea??
thanx
Easyest way is to download Molski's Devpac from http://www.molski.biz/ read pdf i advise you print this as its good reference,
you also need a copy of winimage
install both programs
Basicly
copy your rom NBF file to the c\devpac\source directory
nav to c\devpac\tools\batch\shortcuts and run dumprom
open file c:\devpac\romdump\9b000000-Extension.nb with winmage
after editing save and use the devpac to rebuild the rom and flash
All instructions for building are in the PDF thats been placed on your desktop if you did print this will save you switching windows at every click while building
garymeg said:
Easyest way is to download Molski's Devpac from http://www.molski.biz/ read pdf i advise you print this as its good reference,
you also need a copy of winimage
install both programs
Basicly
copy your rom NBF file to the c\devpac\source directory
nav to c\devpac\tools\batch\shortcuts and run dumprom
open file c:\devpac\romdump\9b000000-Extension.nb with winmage
after editing save and use the devpac to rebuild the rom and flash
All instructions for building are in the PDF thats been placed on your desktop if you did print this will save you switching windows at every click while building
Click to expand...
Click to collapse
thank you very much, i cook my own ext. rom, flashed, then formate the device but nothing new, im looking for something wronge which disable the ext. rom from running after formating
Did you make changes to the config file?
Check cabs don't install here http://forum.xda-developers.com/showthread.php?t=268080
garymeg said:
Did you make changes to the config file?
Check cabs don't install here http://forum.xda-developers.com/showthread.php?t=268080
Click to expand...
Click to collapse
i copied two cabs from my old extended rom, it was working without any issues
i think there is something wrong with the rom, because im reading on faria post and it was written there is a registry on OEMOPERATORS folder on System folder in the Kitchen Rom, but it was in his kitchen.
so there is a registry most be edited to enable Extended rom running
thank you and waiting for more ideas
Sorry for my English ...
I'm trying to learn how to build a kitchen and I followed the BEPE's guides perfectly but I have a problem:
When I use "NBHextract.exe" on "RUU_signed.nbh" the file that I get is "00_OS.nb" and not "OS.nb" as in BEPE's guide, same for the file "00_OS.nb.playload" has the same characteristics, and I know not explain why.
Also, I can not use in any way the "packagebuilder" tool to rebuild the "xip" folder because after having dumped "00_OS.nb.playload" the xip folder that I know, does not contain within it the file "*. dsm " essential to the operation of the tool.
can someone help me? (sorry but I translate before answering for now)
Thank you!
PS: other problem..
When I use "Dump_800" on "00_OS.nb" the files that I get are "00_OS.nb.playload", the IMGFS folder and the IMGFS.BIN.
This IMGFS.BIN was to be automatically erased at the end of the process of dumping, but strangely still active and has a size of about 63 MB, and in the prompt window, at the end of the process of dumping, i read this:
C:\xxxxxxxxxx\IMGFS.BIN
Access denied.
Where I wrong?
Thanx 4 all..
Any idea?...
Anything?...
That relief, then I am not the only one who does not understand anything!
ciko84xp said:
Any idea?...
Anything?...
That relief, then I am not the only one who does not understand anything!
Click to expand...
Click to collapse
I can't help you either ... try to PM one of the Chef you knew from the forum.
ciko84xp said:
Sorry for my English ...
I'm trying to learn how to build a kitchen and I followed the BEPE's guides perfectly but I have a problem:
When I use "NBHextract.exe" on "RUU_signed.nbh" the file that I get is "00_OS.nb" and not "OS.nb" as in BEPE's guide, same for the file "00_OS.nb.playload" has the same characteristics, and I know not explain why.
Also, I can not use in any way the "packagebuilder" tool to rebuild the "xip" folder because after having dumped "00_OS.nb.playload" the xip folder that I know, does not contain within it the file "*. dsm " essential to the operation of the tool.
can someone help me? (sorry but I translate before answering for now)
Thank you!
PS: other problem..
When I use "Dump_800" on "00_OS.nb" the files that I get are "00_OS.nb.playload", the IMGFS folder and the IMGFS.BIN.
This IMGFS.BIN was to be automatically erased at the end of the process of dumping, but strangely still active and has a size of about 63 MB, and in the prompt window, at the end of the process of dumping, i read this:
C:\xxxxxxxxxx\IMGFS.BIN
Access denied.
Where I wrong?
Thanx 4 all..
Click to expand...
Click to collapse
What rom are you trying to dump? if it is a custom rom....built by the new kitchen, it won't be dumpable. You will have to get a base from a chef or dump a factory rom.
parleyp said:
What rom are you trying to dump? if it is a custom rom....built by the new kitchen, it won't be dumpable. You will have to get a base from a chef or dump a factory rom.
Click to expand...
Click to collapse
I downloaded this "RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship", which should be the Official HTC ROM for TYTN II (my device), but I have the same errors described in the first post using the BEPE's kitchen!
What do you mean by "You will have to get a base from a chef?
I do not believe that any chef would give me his base, should give me the entire folder containing the kitchen built! Or not?
sorry for my english...
I try to dump the various types of ROM, but I always make the same mistakes! I do not know how ... believe me I tried all possible solutions!
But I do not surrender ... sooner or later arrive at a solution! Even at the cost of start over with another kitchen!
How many kitchens are there? tell me if you know there are others beyond that of bepe?
I am having the same issue with Bepes kitchen - I have the official signed rom from Sprint for the Mogul and every time I try to use dump_800.bat on the OS.nb file, it fails and says access is denied...
ciko84xp said:
sorry for my english...
I try to dump the various types of ROM, but I always make the same mistakes! I do not know how ... believe me I tried all possible solutions!
But I do not surrender ... sooner or later arrive at a solution! Even at the cost of start over with another kitchen!
How many kitchens are there? tell me if you know there are others beyond that of bepe?
Click to expand...
Click to collapse
There is KaiserKitchen by _Alex_ or KaiserChef by mbarvian and a few others - They both exist on the Wiki.
If the IMGFS.bin won't delete it's not that bad, just try and delete it afterwards.
If you are getting 00_OS.nb it might not be the orginal nbh you are dumping. I get 03_OS.nb when I dump the 3.34 HTC Kaiser ROM (which I rename to OS.nb before dumping). I also get 00_Unknown.nb, 01_SPL.nb 02_MainSplash.bmp (and .nb). Do you get any other nb files?
What the link for the ROM, and why are you using that one for the base? There are newer builds (like the 3.34).
Ta
Dave
DaveShaw said:
There is KaiserKitchen by _Alex_ or KaiserChef by mbarvian and a few others - They both exist on the Wiki.
If the IMGFS.bin won't delete it's not that bad, just try and delete it afterwards.
If you are getting 00_OS.nb it might not be the orginal nbh you are dumping. I get 03_OS.nb when I dump the 3.34 HTC Kaiser ROM (which I rename to OS.nb before dumping). I also get 00_Unknown.nb, 01_SPL.nb 02_MainSplash.bmp (and .nb). Do you get any other nb files?
What the link for the ROM, and why are you using that one for the base? There are newer builds (like the 3.34).
Ta
Dave
Click to expand...
Click to collapse
Sorry for my english.. i try to write wath i want tell you....
Problem solved... with "KaiserKitchen" by _Alex_ I have solved all problem with one file called "KaiserKitchen.batch"... this little application, extract .nbh file, dump IMGFS.BIN and create a SYS and OEM folders, dump OS.nb.payload and create a XIP folder... ALL IN ONE STEP!!! IT'S FANTASTIC...!
Yesterday I have cooked and flashed my 1st ROM... really ruins... but the feel thrill don't have comparisons!!!
Now i don't understand wath should i do to take the SYS folder by one ROM and build inside another ROM.. ex. i want to take the SYS folder by your ROM and build in my own ROM...! to do this, i need to copy also your XIP folder?
Sorry for the english and for the ignorance... but I'm beginners for now...!
ciko84xp said:
Sorry for my english.. i try to write wath i want tell you....
Problem solved... with "KaiserKitchen" by _Alex_ I have solved all problem with one file called "KaiserKitchen.batch"... this little application, extract .nbh file, dump IMGFS.BIN and create a SYS and OEM folders, dump OS.nb.payload and create a XIP folder... ALL IN ONE STEP!!! IT'S FANTASTIC...!
Yesterday I have cooked and flashed my 1st ROM... really ruins... but the feel thrill don't have comparisons!!!
Now i don't understand wath should i do to take the SYS folder by one ROM and build inside another ROM.. ex. i want to take the SYS folder by your ROM and build in my own ROM...! to do this, i need to copy also your XIP folder?
Sorry for the english and for the ignorance... but I'm beginners for now...!
Click to expand...
Click to collapse
There are a few tutorials on porting the SYS and XIP. The concept in bepe's kitchen videos is the same for the SYS in most kitchens (be aware of resolution and language specific files).
For the XIP, have a read around, there are many threads and tutorials on how to do it. But normally the XIP and SYS versions should match (or be very close).
Dave
DaveShaw said:
There are a few tutorials on porting the SYS and XIP. The concept in bepe's kitchen videos is the same for the SYS in most kitchens (be aware of resolution and language specific files).
For the XIP, have a read around, there are many threads and tutorials on how to do it. But normally the XIP and SYS versions should match (or be very close).
Dave
Click to expand...
Click to collapse
ok Dave.. I follow your advice! then you story if I have made progress ...! thanks!
Hello,
I want to (re)flash WM6.1 from microSD, but can´t find a nbh. Flashing in softmode will hang up and freezing my screen on the tricolour.
Extracting from RUU_Kaiser_HTC_GER_3.28.407.0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
will create an exe-File.
Any chance to get out a kaiserimg.nbh from the exe or any link to a german WM6.1 Rom /NBH?
Regards
Check the Kaiser Wiki instead of starting a new thread. There're repositories for many versions of OEM ROM.
Of cause I´ve done this before. But the german ROMs I´m looking for will be extracted as exe-files, I couldn´t find the necessary hints.
Try open the exe using Winzip. You might see the NBH there.
Edit: I tried running the Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe I have, it installs there should be folder containing RUU_Signed.nbh (your temp file folder?). Use this file, rename as KAISIMG.nbh and flash using SD method.
Get Uniextract, then right-click on this installshield wizard and select "Uniextract to subdir" .
Uniextract can do thousands of formats. It's nice program lol.