Wm6 Clock - 8125, K-JAM, P4300, MDA Vario ROM Development

I have noticed that my Clock always resets back to August 11 2006... how can I fix this its really annoying with my calender and such.
Thanks

This is a norml behavior
As far as I know it does that on all WM5 and WM6 ROMs when you do a Cold Reset (either from the settings or with the Com+Record buttons & reset).
Interestingly, the date and time are preserved when you simply flash a new CoreOS over...
Hope this helps.
--eluth.

Related

Missing calls and Wizard lock up - NEED help

Hi, all.
I'm having strange problem with WM6 roms (tried Core.2n and Wrcx 1) ... basically sometimes (was not able to figure out after what) phone kind of locks up, so when I press "green" button, nothing happening (no "call" screen appears) and I have to do soft reset. At the same time I can open keyboard and screen will rotate. So it is not completely locked.
As a result ... if phone is "locked up" and somebody calls me, not only I miss this call, it also does not appear on "missed call list" and no "voice mail" indicator appears too. Even after soft reset !. Which means that I'm missing this call COMPLETELY without even slight hint that somebody called me.
I do not know what to do Two ROMs I tried, both have same problem. Driving me crazy !!!
Probably something you installed that is causing the lockup. Find the common software or tweak you installed, that's the root cause.
This phone is pretty much empty after hard reset. Also I installed SAME applications I had in WM5 (in WM5 I did not have such problem), except BatteryStatus.
Will turn battery status off and see.
Any other suggestions ?
Other apps I installed over to both ROMS:
- BatteryStatus
- start clean
- smartskey
- SPB Backup
- SPB Diary
- SPB Weather
- PIM backup
- PhotoDialerPlugin
- CorePlayer
- WM5Storage
BTW, I did roll back to standard WM5 from T-Mobile before upgrading to WM6. Also I DID hard reset after upgrading to WM6. My Wizard is G3 with 3.08 spl and 2.19 radio
bogdatov said:
Other apps I installed over to both ROMS:
- BatteryStatus
- start clean
- smartskey
- SPB Backup
- SPB Diary
- SPB Weather
- PIM backup
- PhotoDialerPlugin
- CorePlayer
- WM5Storage
BTW, I did roll back to standard WM5 from T-Mobile before upgrading to WM6. Also I DID hard reset after upgrading to WM6. My Wizard is G3 with 3.08 spl and 2.19 radio
Click to expand...
Click to collapse
Try completely removing batterystatus for a while and see if it happens again. It's been known to cause issues.
famewolf said:
Try completely removing batterystatus for a while and see if it happens again. It's been known to cause issues.
Click to expand...
Click to collapse
I did. And I did soft reset. And 3 hours later it locked up again. What surprises me is that once I push "green" button and see my phone locked, I can actually click "Contacts" and contacts screen will appear.
Looks like problem in Phone module or something ?

Settings menu icons disappear on boot (Jwright's 2.12.08, and possibly other ROMs)

Hello guys
I'm facing a minor problem with my latest WM6 rom. It could be specific to Jwright's newest ROM, however I'm starting a new post since it may also happen on other ROMs as well.
Most of the times I soft reset, when my device (Qtek 9000) boots up most of the icons on Settings menu (specifically on Systems and Connection tab) disappear completely.
I also have the same problem with the SPB Traveler today plugin (it may or may not appear) but it isn't related with the Settings icons (one appears, the other not and vice versa).
It's not that big of a deal, since after a couple of repeated resets the problem is solved, but it's a bit annoying to have to reset my device 3-4 times in order to fix this :/
Anyone else facing the same problem?

Can't add new programs icons in programs tab

Lo all... So far really enjoying the TP. It has it's quirks but overall a very nice device. I have one problem in particular though.
I can't add any new programs in the Programs tab. I now have 6 rows of icons (so a total of 18 shortcuts) and I get new + icons below. When I press them it asks me which program I want to add, I choose one and it goes back but isn't added (still a +). A new + icon does appear next to it though, so it 'thinks' something was added.
I can remove and replace any program in the first 6 rows without a problem but can't add any others. Anyone experiencing likewise problems?
All this with a stock NL ROM...
Hmmm, anyone? Please?
Otherwise I think I'll try and flash a different rom and see if that fixes things...
You could try a hard reset?
It is defintly a software problem. You can try a hard reset first, if it dos not work, try a different rom, or even flash the same rom from a different source, because the one installed could be damaged...
Haven't tried a hard reset yet not (means I'd loose my data right?). Guess I could give that a try and otherwise reflash... tnx for the responses.
Btw, this problem occurs on the original shipped rom. I haven't flashed any other rom yet...
same thing happens on my programs tab!
also, can't make the start menu small - apply the tweak and restart and it comes back large
I have the same problem with annoying shortcuts that I cant populate or remove.
I also have some programs in my All Programs list that I have removed but they still show up. Any ideas on how to get rid of them?
same problem here
I have the same problem here with my original HTC rom (see signature).
Currently my device is ay HTC for repair/replace.
As soon as it comes back, I will change to a custom ROM to see if this problem is fixed.
Regards,
ARo

Fuze freezes on startup ... sometimes

I've been having a problem since shortly after I got my Fuze, that sometimes on reset it doesn't want to finish starting up -- maybe on one out of three resets. It seems to hang just before starting TF3D. It's still semi-responsive ... the backlight brightness turns back up if I hit a button, and an on-screen button may react if I press it (though it doesn't get as far as launching the application or bringing up the start menu)
Usually forcing another soft reset via the pinhole button results in it booting just fine.
I'm currently using ROMeOS, but I've run into this problem with multiple ROMs, including the stock one. I don't think it's a hardware issue ... I haven't had any other problems that suggest the unit itself is bad.
I tried to figure out what I've done each time I've customized my setup. I stayed away from registry tweaks that affect things like caches or hardware performance this time, and still got the issue. I tried uninstalling some of the apps that I always use. No dice.
But I think I've narrowed down the issue. I uninstalled mun background4allpages, which puts the wallpaper you select onto every tab. After several resets, no problem. I'll continue to test throughout the day, resetting sporadically. But I haven't seen anyone else report a problem like this with background4allpages ... so I'm not sure this is it.
Anyone have anything like this, with any cause at all?
I have his problem every once in awhile with ROMeOS too. I'm not sure what causes it but I'll have to do three or four restarts before it continues on. I think it usually happens after I install an app that has a Today plugin with it. But I'm not totally sure about that but I do know if is after I install a cab.
Looks like a today screen hangup. I can fix it by going to the Today Items tab in settings->today then choosing ok (which causes today to refresh plugins).
imtribble -- I've never needed to do 3-4 resets to clear it. I'm not sure I've even needed to do 2. But I know in my case, it's happened without any cab installed since the last boot.
Sleuth255 -- I'd actually tried that (though not for that purpose) but it doesn't seem to have helped, at least not permanently.
With background4alltabs uninstalled, it seems like the problem is gone (at least so far). I wonder if it might actually be the collision of using both background4alltabs and manilla customizer to change my clock -- since I read somewhere that the files background4alltabs changes also affect the clock. If I can confirm after several more resets that this was the problem, I'll post something in that thread.
I'm just so confused that it only happens sometimes, not all the time. Odd.
Actually, Sleuth255, that may have helped after all. I reinstalled background5allpages, and the problem reappeared. But then I did the Today "OK" and haven't been able to make it freeze since ... so maybe. Will report back further after more testing.
It is not just on ROMeOS though, with my fuze the same thing happens and I am running elite ROM RC2. It is some kind of today screen hangup and sleuth's solution did not help me. It takes ~2-3 soft resets to get it working correctly. If I hold the power button to reset rather than pressing the stylus reset it boots up with no hangs though. Interesting.
mdow09 -- are you using background4allpapers? how about manila customizer (and if so, what have you used it to change)? anything loading in your startup group? trying to figure out what the common elements among people having this problem might be.
its happened to me on provens rom and when i had romeos
but a second reset always fixes it
Not using background4allpapers or manila customizer, the clsoest thing I am using to that is TF3D config. My senses tell me it is something to do with my secondtoday screen. My startups are as follows:
Answer key disabler
autoshortcut.ink
cleartemp.ink
filedlgchgs.ink
G-alarm reload
HTC startup
PKG.ink
poutlook.ink
startclean.ink
hmmm.... I've not gotten a permanent fix either, I occasionally hang up after a reset. When I have my issue, the start menu is operational and I can load programs etc w/o issues. It's only the today screen that's hung which is why I tried fixing it by refreshing the items list in today settings. I'm not running touchflo either if that makes a diff.
mdow09 -- It looks like the only things in common we're running are the processes that are always there. Nothing from an installed app.
Sleuth -- How long does the today/ok seem to fix it for? Do you do something in between that could be re-triggering the problem? I've done 6-7 resets since I reinstalled background4allpapes. I got a freeze on the first. I tried the today/ok and it hasn't frozen since. Been running various apps and doing various tasks in between the resets.
I -MAY- have solved this, or at least worked around it.
Previously, I tried uninstalling Background4allpages. That seemed to solve it, but I only had it uninstalled for a day or so. No conclusive word on whether it was involved.
I tried Sleuth's Today/OK trick. That seemed to stave it off for a while. Still came back. Possibly after installing new apps or doing other things that affect the Today setup. Not sure.
But here's my most recent attempt -- I moved TouchFlo3d (almost) all the way to the top in the list of Today items, with everything else (as normal) unchecked. You can't go all the way to the top, because the date entry is there. My working theory (based on nothing concrete yet) is that the plugins are loaded in the order in which they appear in that list, and the Today function isn't getting to load one that's problematic. Perhaps it's a similar issue - when the problem appears, Touchflo itself won't load because of another plugin that loads first, but each would be fine independently. In any case, pushing it to the top priority seems to be preventing the problem -- at least for now.
Obvious holes in my theory -- It seems strange that Today would still load unchecked plug-ins at all, though maybe it still does some sort of cursory scan of them. And wouldn't the problematic plugin still then load AFTER touchflo in my new setup? Maybe it is, but it's only causing a problem if it loads before TF3D?
As before, will report back after more observation ...
Wordsmith9091 said:
Sleuth -- How long does the today/ok seem to fix it for? Do you do something in between that could be re-triggering the problem? I've done 6-7 resets since I reinstalled background4allpapes. I got a freeze on the first. I tried the today/ok and it hasn't frozen since. Been running various apps and doing various tasks in between the resets.
Click to expand...
Click to collapse
Its intermittent for sure. I've not been able to peg down what causes it yet.

CHT 1.8 Problem

Hey,
I installed CHT 1.8 yesterday on my HD2 with the latest 1.72 o2 rom.
It was working fine for the rest of the day and i switched the phone off and charged it overnight.
This morning, i switched it on usually and the lockscreen was white instead of black (i have the manilla unlock slider)
I fiddled around with the different settings and i cant seem to change the background colour.
Also, now when i lock the phone, the volume can be changed which is a problem when i put it on silent, lock it and put it in my pocket the volume button can accidentally be pressed and the phone put off silent. Usually when the phone is locked, everything is locked and you need to unlock it to change the volume. Is there a fix for this?
Thank you for your help!
This should be posted on the CHT 1.8 thread, not here. You will get the proper feed back there. Not flaming, just pointing you in the rite direction.
I also was having problems with CHT 1.8 lock screen. After doing some searching, I found this is a known issue. I removed 1.8 and reinstalled 1.7 till they can work out the bugs.
Cheers
I POSTED ABOUT THIS ON COOKIE THREAD. was told it was a known bug too, it apparently occurs when using landscape view. a fix will be made on the next update. (screen turning white issue)
Make sure that the wallpaper you've set for your lockscreen has a FULL english path !!!
for example Storage card/wallpapers/...
I understand your frustration, always always always... backup your device before doing any mods to your phone especially manila mods. There are dozens of devs working around the clock on their spare time, and not everything will be compatible with your version of wm 6.5/ 6.5.x... also once you have just the normal cht up and running, after you set your icon s in place, EXPORT!!! save these setting in case something gets messed up.
To uninstall CHT 1.8 do i have to do a hard reset? can someone give me a link to the step by step guide on how to do it properly?
When i was using CHT1.7 i had problems and uninstalled it leading to no hometab and had to hard reset it and use the normal sense.
Thanks for the help and ill post in the CHT forum next time

Categories

Resources