I´m using NotTooSmart vanilla and really loved it but now I cannot execute Messaging program. No SMS, no MMS and no email. I don´t know why???
When I go to Programs - Messaging nothig happens. When I press button 1 nothing happens.
Why????
Can´t find help in the forum yet.
Same after ahrdreset and backup
I did a hardreset and messaging is working. But after restoring by SKTools - nothing happens again. I don´t know when messaging stops working. SO I think I´ve got to set up phon efrom bottom. Urgh:
papamopps said:
I did a hardreset and messaging is working. But after restoring by SKTools - nothing happens again. I don´t know when messaging stops working. SO I think I´ve got to set up phon efrom bottom. Urgh:
Click to expand...
Click to collapse
I dont understand what you are having backed up with SKtools. This being said, any backup made with SKtools should be used only on the rom you made it with. Every rom is diffrent as every chef is diffrent. Set it up from scratch and make a new backup. then when you hardreset you should be ok to use those backups.
It is your rom
I ran SKtools after setup everything with your vanilla ROM. Tha is clear. But while installing everything there must be a mistake - I don´t have messaging programs. I´ve set email accounts and everything was ok, stable and very fast. Today I recognized, that I couldn´t write anny message. It only makes nothing by pushing button 1. It makes nothing, when I go to Programs - Messaging.
After hardreset everything works great. So while installing and befor making a bakup of your ROM and my settings - there must be a break in these part. So after restore I have the same problem like before. So I have to install everything again. My fault I think.
But the backup I made is naturaly from your ROM.
You realize you are backing up and restoring on WM6 and most tools are not upgraded for WM6 yet. Could be that SKtools restore (or backup) doesn't work quite right with WM6. Just a guess, but anyone running WM6 should realize that some things just may not work (or appear to work but then break, or worse, break other things due to bad interactions).
Welcome to the bleeding edge!
First test
It hase been my first test with SKTools and everything is fine. Everything works. But perhaps I haven´t realized that messaging was not running before I made the backup. So when I restore - I restore the mistake. So I´ve got to hardreset and start again.
No problem. Third time this week with different ROM
I read from another thread that the way wm6 stores the contact list is quite different from wm5. Maybe this is why SKTools can't restore the backup correctly on wm6.
No problem
Backup works perfektly.
I cannot run any messageaplication.
papamopps said:
Backup works perfektly.
I cannot run any messageaplication.
Click to expand...
Click to collapse
same thing here. Backup with spb backup 1.55 does work fine for other wm6 rom but don't work (restoring) for this rom.
spb works fine but doesn't restore the messenges which are backuped, the rest of the restore works great
strange
da heufster
Hard reset made it
After one hour and ahrdreset, messaging is again working. Don´t know why it was broken.
But now have again 25MB after sktools optimize.
Running fast.
Thank you.
Related
Hi Everyone,
I just upgrade my XDAIIs rom to 1.40.00WWE. I backup my files using sprite backup. Upgrade went ok, no problem. Then i only restore the messeges. all restored properly. everything work great except that i can not receive sms anymore. However I can send sms ok. Anyone encountered similar problem? any step that I missed?
So grateful if anyone can help me. Thanks you.
Best Regards,
HSC1898
I had this problem, it is recieving them, but the database is corrupt so it can't do anything with them to notify you, so yo unever see them.
A hard reset will fix it.
I concur hate to say it but a Hard reset will sort it (I had same problem)
how to fix sms bug
u dont need to hard reset. Find an application called cleanmail, its mentioned in the forum. install and run it and it will delete the corrupted databases. the problem is caused by a bug in the version of sprite u are using. once u have deleted the databases u will need to set up ur e-mail accounts again, but it works 100%.
I had the same problem and have never used Sprite backup ever!
I don't know why this is happening, probably because I deleted something in the windows folder. My touch restores system registry(or database) automatically when I don't want it to. The softkeys go back to original, pocket activesync not working and the exchange informations are wiped out, contacts are all deleted, and the most weired thing is, the mail/sms application won't start!
I've tried so many times, restoring to the previous version, and it worked for a while, then if I try to sync the email again, everything comes back!
Please, please, please! I've come a long way to make my touch so perfect for me, I don't want to do it all over again!!!
Somebody help me! PLEASE!
Update:
I kinda got it fixed somehow, anyway, I first restored, and used PIMbackup to backup the contacts something etc... then go directly to activesync, and delete everything before they disappear, then reset, then used pimbackup to restore everything, then it works fine now, email's fine, contacts' fine, everything's fine.
Hi guys, I've got a little problem that I need some help with.
Whenever I download and intall any rom on my phone, I use it for a while, maybe a few weeks or sometimes it lasts a month or two (most recently, lasted only a week)....it then freezes up at some point and I have to do a soft reset...sometimes instead of doing a soft reset it does a hard reset on its own....or it even sometimes freezes up on the boot screen and I have no other options but to perform a hard reset.
I'm sick of losing all my data and programs and then having to replace them.
I've tried numerous roms varying from Romeos, Laurentius etc....but I still get the same problem. I haven't had a stable rom since Dutty, but even with his, I would get this problem sometimes.
Any Ideas what I can do, this is getting really really annoying.
My phone spces are:
HTC Kaiser, 3.56 Hardspl (recently updated a month ago), Radio 1.65.24.36.
Apps that I always install:
SBSH Pocketweather, PIM backup, tomtom 6, z2 R2PC client (remote desktop program) and PT Travel alarm.
I sync all my previous emails, notes and call logs with PIM backup, and all of my calendar appointments and contacts I sync using Activesync through my PC.
Any suggestion would be extremely helpful, I'm ready to pull my hair out here....I'm sick of getting stranded having to do a hard reset then coming home and spending two hours fixing my phone to the way I like it,
Thank you,
P
I don't use any of those programs except TomTom, and even TT is used rarely.
BUT
I do/have used pretty much all the new ROMs and have had no stability problems. Obviously one or more of the programs are disagreeing with with the newer ROMs.
Is it because of wm6.1?
Are you getting the freeze when one of the programs are running?
I had that happen to me too the other day. I'll get the details of the ROM and post in here as soon as I can.
Try the ROM in my signature - never have a lock up. Only turn it off when I fly. Used it since it was released. I use TomTom and several of the others that you say and LOTS of others that I have installed.
Bill
umvagia0 said:
snip....it then freezes up at some point and I have to do a soft reset...sometimes instead of doing a soft reset it does a hard reset on its own....or it even sometimes freezes up on the boot screen and I have no other options but to perform a hard reset.
I'm sick of losing all my data and programs and then having to replace them.
Any Ideas what I can do, this is getting really really annoying.
My phone spces are:
HTC Kaiser, 3.56 Hardspl (recently updated a month ago), Radio 1.65.24.36.
Apps that I always install:
SBSH Pocketweather, PIM backup, tomtom 6, z2 R2PC client (remote desktop program) and PT Travel alarm.
I sync all my previous emails, notes and call logs with PIM backup, and all of my calendar appointments and contacts I sync using Activesync through my PC.
Any suggestion would be extremely helpful, I'm ready to pull my hair out here....I'm sick of getting stranded having to do a hard reset then coming home and spending two hours fixing my phone to the way I like it,
Thank you,
P
Click to expand...
Click to collapse
The SPB Pocket applications are known to cause headaches with WM 6.1 ROMs. I would suggest running without it installed and see if the problem still occurs.
You think this has anything to do with what hardspl version i'm running? Even when i was running the older hardspl with duttys it still crashed on me once or twice.
As for software, i'm not running any spb programs...the only one i can see maybe causing a problem is pocketweather(by sbsh)...but it's a pretty simple weather app...i sure hope it isn't the cause.
I might have to give that Shogun app a try and see how that goes.
Thanks for the replies so far.
umvagia0 said:
You think this has anything to do with what hardspl version i'm running? Even when i was running the older hardspl with duttys it still crashed on me once or twice.
As for software, i'm not running any spb programs...the only one i can see maybe causing a problem is pocketweather(by sbsh)...but it's a pretty simple weather app...i sure hope it isn't the cause.
I might have to give that Shogun app a try and see how that goes.
Thanks for the replies so far.
Click to expand...
Click to collapse
Try removing the weather app. As for HardSPL, the only known issues with running an incorrect/outdated version of it are occasional device freezes that generally last from 1-5 seconds.
I recommend flashing the AT&T OEM recent WM6.1 ROM. I am using it now and have no issues thus far. I also installed all of SPB Suite and Resco Suite, iGO8 and many other programs, NO ISSUES so far.
This ROM has been released and it is posted here on this forum.
Im contemplating a hard reset and use Sprite backup. So my question is.. what WONT it bring back.. in terms of settings and programs and what not. I obviously dont care much about the storage card, but just everything else.. what will i lose.. call history.. sms... mail account settings, program settings.. UI stuff...
Thanks for ure help.
Anyone have any ideas?
Assuming you have the latest version, it "should" recover everything. But I put that in quotes because something flaky can always happen depending on any number of factors. However, it still beats the alternative of not backing up at all.
I can tell you that I had to do a restore of my Fuze a few days ago, using Sprite 6.5, and it worked flawlessly. Hope that helps.
By and large...sprite is able to backup and restore almost every setting inlcuding email and your email account settings. Just keep in mind that email settings backed up wont be transferable to another device. Just in case your planning on doing a restore on another device.
Today my message app stopped working. My today screen says "1 unread mail" but the app doesnt start if i click it, the hardware evenlope button OR messages app by start menu... what do i do??! HELP!!?
Running stock rom wm 6.1 norwegian.
se1988 said:
Today my message app stopped working. My today screen says "1 unread mail" but the app doesnt start if i click it, the hardware evenlope button OR messages app by start menu... what do i do??! HELP!!?
Running stock rom wm 6.1 norwegian.
Click to expand...
Click to collapse
Tried a soft-reset? If so, and it doesn't work, I think the best way is to backup and perform a hard-reset.
[ElCondor] said:
Tried a soft-reset? If so, and it doesn't work, I think the best way is to backup and perform a hard-reset.
Click to expand...
Click to collapse
That did not work... And even as i did a hard-reset and performed a backup of all programs. When i restored the backup, the problem reoccurred...
So, i guess ill have to re-install all programs. Luckily all my documents, sms, contacts and email has been backed up to microsoft myphone/live...
it just takes too much time installing all apps over again..!
Then I think there are some corrupt files, which is very unfortunate because corrrupt files aren't fixable.
Maybe you can try an older backup, so you can see if you still have the problem then.