Database Info

Disable dialing beep tone

....the dialing beep after a number/contact has been dialed is quite bothering, is there a reg hack how to switch it off?

fire00 said:
....the dialing beep after a number/contact has been dialed is quite bothering, is there a reg hack how to switch it off?
Click to expand...
Click to collapse
HKCU\ControlPanel\Sounds\
Now go to :
Dialing\Script
Erase the "p"
You can also do the same for hangup, etc. The mid file is called "dpadctl.mid"
Of course, as with any registry change, soft reset using a 3rd party app (just to be sure)

works perfectly, thanks a lot man

patmannyc said:
HKCU\ControlPanel\Sounds\
Now go to :
Dialing\Script
Erase the "p"
You can also do the same for hangup, etc. The mid file is called "dpadctl.mid"
Of course, as with any registry change, soft reset using a 3rd party app (just to be sure)
Click to expand...
Click to collapse
Hello Patmannyc:
After reading your answer I can see you know a little bit about registry tweaks on Palm 750.....
Do you have any web page where I can have specific treo 750 tweaks since pages I have founded are for standard Wm5 devices and most of the tweaks do not work properly
Thanks in advane
Lemmon

Depends what you want to do.
Most Wm5 registry hacks also DO work with the treos. For any treo-specific tweaks you can look @ www.ppcgeeks.com, there are plnty there.

Registry tweaks?

Hi,
does anyone have any fun/useful registry tweaks to share? Should be a few new ones in WM6?
One thing I would like is a more "zoomed out" view in the calendar. Now it shows 8 hours and jumps up and down as you move between calendar entries. Tried the old registry changes to set working hours between 8 am to 10 pm but it doesn't seem to care about those settings.
regards
Björn

or a tweak to deactivate the Call-Start-Tone...

AGREE!
that annoying tone when you press send HAS TO GO!
Anyone ?

No registry tweak but if you make a new file callstart.wav that is blank and replace the old one then all is still happening but you don;t hear anything.

if you go to LU/ControlPanel/Sounds/Dialing. Go to Value: Sound. Here you can change or delete the tone.
Also a lot of other sounds can be changed here.
Good luck

I made a tool called AmpTweaks for WM5 that has the option to remove the call sound.
That tweak should work for WM6 also.
http://www.ampcore.dk/Product.aspx?id=1

Basicaly any WM 5.0 Reg tweak should work you know....

Disable beep at start/stop of a call...
HKEY_CURRENT_USER\ControlPanel\SoundCategories\CallStart
InitVol = 0

Remove white HTC Startmenu background (Speeds up launching of Startmenu):
remove
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:MSStart -> BKBitmapFile
Edit: removed bull**** by me

making activesync not auto start randomly

i have tried the fake server method and setting to manual- didnt work
tried the disabling replog.exe using memmaid didnt work
tried unchecking change time auto in phone settings - didnt work
i tried deleting poutlook.exe from startup- didnt work
tried the reg edit of activesync mentioned earlier changing from 5 to 0 - didnt work
my god. i even installed quickmenu and hit its setting to turn off activesync
it still starts!!!
what else is possible??

Same here and it's darned annoying!
Anyone have a solution??

one more here

if you use fdcsoft task manager and go into notifications look for the repllog.exe that states "Event: The system time change" (for me its the one in the middle of the three) and disable that.

hieu2ueih said:
if you use fdcsoft task manager and go into notifications look for the repllog.exe that states "Event: The system time change" (for me its the one in the middle of the three) and disable that.
Click to expand...
Click to collapse
But you have to enable it every time you actually need to sync...

You shouldn't have to, the ActiveSync USB connection is controlled by one or both of the other 2. Disabling the one mentioned above has worked for me. It now ONLY appears if I ActiveSync.

Nooner said:
You shouldn't have to, the ActiveSync USB connection is controlled by one or both of the other 2. Disabling the one mentioned above has worked for me. It now ONLY appears if I ActiveSync.
Click to expand...
Click to collapse
how do you "disable"? i deleted it
is that the same
cause if it is then it didnt work for me

lbhocky19 said:
how do you "disable"? i deleted it
is that the same
cause if it is then it didnt work for me
Click to expand...
Click to collapse
i am kind of confused too

same here
stas333 said:
i am kind of confused too
Click to expand...
Click to collapse
Deleted the repplog when time changes, but still keeps popping up...

Hi
Before 3 days I replaced TF3d with this one http://forum.xda-developers.com/showthread.php?t=423851&highlight=diamond+manila
Since now I hadn't randomly activesync and charching over night is ok

has anyone found an easier way to make this happen?

dont forget to try turning off the 'automatic change time zone and clock' found in settings-> personal -> phone ->time zones
this mixed in with disabling repllog (apprunaftertimechange)
and mixed with creating a fake server to set the update time to manual
these 3 things combined together worked for me

sayazs said:
dont forget to try turning off the 'automatic change time zone and clock' found in settings-> personal -> phone ->time zones
this mixed in with disabling repllog (apprunaftertimechange)
and mixed with creating a fake server to set the update time to manual
these 3 things combined together worked for me
Click to expand...
Click to collapse
ive asked this before on other threads but when you say disable that repllog does that mean delete it??

lbhocky19 said:
ive asked this before on other threads but when you say disable that repllog does that mean delete it??
Click to expand...
Click to collapse
This 2007 thread from KidNovak explains it all.
http://forum.xda-developers.com/showthread.php?t=322673
You'll need the program “Task Manager by FdcSoft” --> go to "Notifications", select the correct repllog, and click the Icon with the RED dot at the bottom. No need to erase or delete. The Red Dot disables that repllog, and you can enable it again in the future if you need it.

I want to ask just oine thing.
What does the activesync do that you are so mad about it being active? From my own experience it doesnt seem to drain battery, it doesnt pop up any windows, it doesnt make sounds, or noises. Its quiet. So why trying to remove it with such dedication and force?
Just ignore it. I do. And i dont have a problem.

Disabling ActiveSync KeepAlive Setting to manual >>>
I have an AT&T Tilt which ActiveSync keeps autostarting every five minutes and could not stop it. It was a serious power drain on the battery. I found that it takes 3 fixes to stop the sync action from auto-starting all the time.
1. Kill the repllog / remote h process in the task manager (recommmend fdc taskmanager for this)
2. Disable the Repllog Notification (Apprunaftertimechange) in the Notification Window.
3 Registry hack > HKEY>CURRENTUSER>SOFTWARE>MICROSOFT>ACTIVESYNC
locate value "Keep Alive" change this to "0" for disabled. 1 will keep it alive with the remote h settings.
I have Windows Mobile 6.1 Pro and use AS version 4.5 the latest and this works for me.

The ultimate solution.
Ok here's what you do. The fake exchange server solution never worked for me either.
First of all you need FdcSoft's Task Manager program. It is the best and a must have.
Use the Notifications editor to disable the repllog.exe for RunAfterTimeChange. (The disable button is the one with the red dot.)
Use the registry editor to go to [HKEY_CURRENT_USER\Software\Microsoft\ActiveSync] Change the KeepAlive value to 0. Tap and hold "KeepAlive" (or go to file menu) and select "Export...". (not Export All) Save this .reg file in the \\Windows\StartUp folder or save it somewhere else and copy it there.
Now you will need Ghisler's Total Commander.
Using Total Commander, browse to \\Windows\Startup folder or wherever you saved .reg file. (Windows mobile doesn't automaticaly know that .reg file should be opened with TaskMgr so you have to associate it.)
Tap and hold your .reg file and select Properties. Select "Associate" tab. Tap gray box that says "Associate..."
In "Command:" box browse to the folder where TaskMgr.exe is. (\Program Files\FdcSoft\TaskMgr\TaskMgr.exe)
In "Parameter:" box leave the "%1" there, and type "/silent" right after. ("%1/silent") This will keep a dialog box from poping up on start up.
"Ok" everything and you're done! Enjoy.

I'm also running Windows Mobile 6.1 on an HTC Touch Elfin.
Here's how I was finally able to do it, and my notes:
-disable auto time zone/clock updates in “phone” settings under personal
-disable 1 of 3 “repllog.exe” that has to do with update after time change with “TaskMgr.exe – by FdcSoft” under notifications
-change registry value of HKCU\Software\Microsoft\ActiveSync\KeepAlive to 0 (this will not stick after reset unless you've first disabled the auto timezone/clock updates)
-reset phone
-re-enable auto time zone/clock updates (not sure if it still work though without ActiveSync)
-it will work without disabling the notification in TaskMgr too but then you have to leave auto timezone/clock changes unticked and you still have to do the registry change; ticking of auto timezone/clock changes without TaskMgr change to repllog.exe will also re-enable the keepAlive registry value

sms sent message

So this is my second smart phone and I thought I had the hang of the easy things. By default the sms sent notification is enabled on the tp2. So, you get that annoying notification reminder when you send a message. I used advanced config to disable sms sent notification and I no longer get the annoying notification. However, I now get a dialog box that pops up and says "SMS/MMS message sent." It's different from the sms sent notification, but still really annoying. I tried enabling and disabling all the sms notifications available and even changed the registry setting myself ([HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings] Set SMSNoSentMsg to 1). Is anyone else seeing this? Thanks

Mine is a Verizon and I have tried the cab and the regedit but it still pops up. Mine was already on 1 (enabled) out of the box.
My nephew is on Sprint, and the regedit worked on his. His was disabled (0) out of the box.
I stopped looking. I am sure one of these days someone will figure it out.

worked for me
using reg editor navigate to: "HKLM\SOFTWARE\Microsoft\Inbox\Settings" and change "SMSNoSentMsg" to 1

crxer0007 said:
using reg editor navigate to: "HKLM\SOFTWARE\Microsoft\Inbox\Settings" and change "SMSNoSentMsg" to 1
Click to expand...
Click to collapse
Worked for me too. THANKS!

change it to 2 and it will disable in tf3d as well

mine was already set to 1, changed it to 2 and it worked.
Thanks

That was the trick. I changed it to 2 and it took care of my problem. Thanks XESSIVEMINDS

benjampm said:
So this is my second smart phone and I thought I had the hang of the easy things. By default the sms sent notification is enabled on the tp2. So, you get that annoying notification reminder when you send a message. I used advanced config to disable sms sent notification and I no longer get the annoying notification. However, I now get a dialog box that pops up and says "SMS/MMS message sent." It's different from the sms sent notification, but still really annoying. I tried enabling and disabling all the sms notifications available and even changed the registry setting myself ([HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings] Set SMSNoSentMsg to 1). Is anyone else seeing this? Thanks
Click to expand...
Click to collapse
I wouldn't use advance config with the TP2 i heard a lot of stories of it messing things up...

AdvanceConfig tool problem
kern417 said:
I wouldn't use advance config with the TP2 i heard a lot of stories of it messing things up...
Click to expand...
Click to collapse
Yes I used the AdvanceConfig to disable the sent sms notification and my battery icon went away and i couldn't clear certain notifications one being the failed delivery notification i would have to cycle the power to get rid of it. I used the tool for the Touch Pro is there one for the Touch Pro2

XESSIVEMINDS said:
change it to 2 and it will disable in tf3d as well
Click to expand...
Click to collapse
I have always used CeRegistry editor. It is pc based though.
THANK YOU! That notification is so damn annoying!
Just a quick thing before people start posting that it doesnt work, Do a soft reset after making changes to the registry. It will take after that.
Thanks!

crxer0007 said:
using reg editor navigate to: "HKLM\SOFTWARE\Microsoft\Inbox\Settings" and change "SMSNoSentMsg" to 1
Click to expand...
Click to collapse
What is reg editor?

Desperate: How do I disable the Email LED notification?? (Sprint)

I am quite frustrated by now and have tried all tricks on this forum(http://forum.xda-developers.com/showthread.php?t=460368) to stop the email LED notification without any success. No matter what, the green blinking led comes up on receiving new email and would not go till I open the Email application and open an email.
Any ideas please?

have you tried this?
http://forum.xda-developers.com/showthread.php?t=371391

burtonsnow8 said:
have you tried this?
http://forum.xda-developers.com/showthread.php?t=371391
Click to expand...
Click to collapse
This is not supposed to work with TP2 I heard from everybody?

not sure never messed with notifications, but I recall reading somewhere on ppc issues w/ nueled. There are a couple other tweaks out there (this is for a tilt 2, so back up your registry because i'm not sure it will be the same).
http://forum.xda-developers.com/showthread.php?t=580048
*edit*
This might work better because mr.x and mightmike created it (specifically for CDMA tp2)
http://www.wmexperts.com/miss-your-led-notifications-sprint-touch-pro-2-rom-update

burtonsnow8 said:
not sure never messed with notifications, but I recall reading somewhere on ppc issues w/ nueled. There are a couple other tweaks out there (this is for a tilt 2, so back up your registry because i'm not sure it will be the same).
http://forum.xda-developers.com/showthread.php?t=580048
*edit*
This might work better because mr.x and mightmike created it (specifically for CDMA tp2)
http://www.wmexperts.com/miss-your-led-notifications-sprint-touch-pro-2-rom-update
Click to expand...
Click to collapse
I did try the cab - Not sure if this actually works for email (I was not concerned about it then) BUT this once screws up the Vibration on Keyboard/Phone pad everything and I had to uninstall it.
I will try the first link and let you know.

bones20 said:
I did try the cab - Not sure if this actually works for email (I was not concerned about it then) BUT this once screws up the Vibration on Keyboard/Phone pad everything and I had to uninstall it.
I will try the first link and let you know.
Click to expand...
Click to collapse
Im assuming you reset your device and then configured notifications once it was installed?

burtonsnow8 said:
Im assuming you reset your device and then configured notifications once it was installed?
Click to expand...
Click to collapse
I did not reset my device. I installed the cab, configured the options and then must reset the device a few times for other reasons. Not doubting the efficacy of the fix, I never tested how well the cab actually works. I then realized (after quite a bit if sweat), that it was this cab, which screwed of the vibration on display keyboard. So I uninstalled it.
Now I am hunting to get the email LED notification out. I did find those registry tweaks and applied them. Infact, as I write, the check box for led is off for email.

bones20 said:
Now I am hunting to get the email LED notification out. I did find those registry tweaks and applied them. Infact, as I write, the check box for led is off for email.
Click to expand...
Click to collapse
A lot of times registry changes won't take place until a soft reset. I have made it a habit to soft reset after installing programs or making changes to verify everything works.

Enable/Disable LED Notification Setting in Sound and Notifications for Touch Pro2
bones20 said:
I am quite frustrated by now and have tried all tricks on this forum(http://forum.xda-developers.com/showthread.php?t=460368) to stop the email LED notification without any success. No matter what, the green blinking led comes up on receiving new email and would not go till I open the Email application and open an email.
Any ideas please?
Click to expand...
Click to collapse
Enable LED Notification Setting in Sound and Notifications [with my changes for to make it work for Touch Pro2 but it should be good for HD2 as well.]
If you want to get the addresses for HTC HD2 just click the keys up and down in the same area of the registry, and look at what is specified. Or go to the link below for the original forum where I got the info from before I made modifications to their info to make it fit for Touch Pro2]
For Touch Pro2 running on stock ROM wm6.5 for Sprint:
Messaging: New Email Message
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65A-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)
Messaging: New Text Message
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65B-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)
Phone: Missed Call
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D660-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)
Phone: Voice Mail
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D661-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)
Messaging: New MMS
HKEY_CURRENT_USER\ControlPanel\Notifications\{C346 5585-39EF-4c9b-B2A3-5558BF27BFB0}]
“AvailableOptions”=dword: change to 15 (default is 11)
Soft reset. Go to Sounds and Notifications, and uncheck "Flash light for" for each item that you fixed above. "Flash light for" will no longer be grayed out.
Obtained from <http://pockethacks.com/category/tweaks-and-tricks/>
Does anyone know of any registry tweaks to disable the flashing red LED notification for low battery in Touch Pro2? I tried to disable it through the "Low battery warning" flash option in Sounds and Notifications menu of wm6, but that does not work. If you want to know how to enable "Low battery warning" in Sounds and Notifications menu, here are the instructions:
1. Search for the key HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D663-239C-47a7-9304-0D347F580408}\.
2. Create a new String value, name it Default and set its value to Low battery warning.
3. Now move to Start -> Settings -> Personal tab -> Sounds & Notifications applet -> Notifications tab, choose Low battery warning value from the Select an event drop-down menu and set whatever you want.
Pasted from <http://www.pdagold.com/forums/view_topic.asp?t=3691>