Database Info

Major Help Needed Update Via Sd Help

Hiya guys i have a o2 xda exec but about 2 months ago there was a fault with the usb port broke so i could not charge or sync with the computer so i bought a exturnal battery charger and only today managed to get it fully charged for the first time is there a way of updating to wm6 via the sd slot of the device as i got a 2gb sd and a 4gb sd card
also just to add tried extracking the installation exe and put on memory card , booted the wm5 then used file explorer to access memory card then tapped enterbl.exe it rebooted into boot loader but also now is stuck tried using the http://wiki.xda-developers.com/index.php?pagename=Universal_Technical tried all key combinations any help realy appreachiated

Application freezes/hangs when reading Storage Card on WM6.1

Hi all
Sorry for my poor English
I have tried three to four WM6.1 Rom on my HTC TYTNII, whenever an application try to read the storage card, it hangs, but any other application installed on device working fine,
also tried to exchange the SD card with my friends TYTNII,
both my and his card working on his device
both my and his card hangs on my device
however, if I flash a WM6.0 Rom, this issue doesn't exist, did anyone meet this or only me ???
BTW,
the card is a SanDisk 8G
3.29.707.0 WWE
05/07/08
1.65.16.25
25.83.40.02H
KAIS130
SPL-3.28.Hard
CPLD-8
Hope we may have a solution on the above, Thanks for any reply.

the apps that are freezing, are they installed on device and reading files on storage card orr installed to storage card and the shortcut is on device? if the apps are installed to the storage card they will sometimes run slow, try uninstalling them and reinstalling to the device. also you might check your running programs in the task manager. running programs will obviously eat RAM and thus the device will run slower

i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...

rookery said:
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
Click to expand...
Click to collapse
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph

variosteph said:
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
Click to expand...
Click to collapse
Thanks for your information, but I had flashed "Dutty's", "TNT Series" and HTC official, same problem happened a few days after the flash, i assume it may not cause by download problem....
are there any way to verify a flash result ????

Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me

rookery said:
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
Click to expand...
Click to collapse
1. Try removing the SD card and SIM while flashing the new ROM.
2. Try formatting the SD card in FAT32 again.

Clean your card slot in the phone its dirty thats all .

Tried removing the SD card and SIM while flashing the new ROM
Tried formatting the SD card in FAT32 again.
problem still reamin,
however, once reflash back to Windows Mobile 6.0, SD card works reflash 6.1 SD hang.....any idea?

I've seen a similar symptom to this if I try to change my Internet cache to write to the storage card.
Both the OEM AT&T Tilt 6.1 firmware and a couple of the flashes from here - same thing.
Now here's the cute part - I also have a 2GB NON-SDHC card and so far, with THAT card, it hasn't happened.
This looks like some kind of registry problem in these ROMs, and it also appears to be in the base code and across a number of different loads.
It scrambled the hell out of the formatting on my 4GB card when it happened the first time. The second time I SAW a scrambled directory in Total Commander, but a checkdisk on my PC (it has a reader that can read the SDHC cards native) came back clean.
There's something funny going on with these loads somewhere.
Never mind - it just blew up the same way on the non-HC card. Same deal.

SD Card CID (w/o phone)?

I am in a bad situation with my rooted, now semi-bricked G1 =[
I had cyanogenmod and RA recov. I installed a new theme directly from the CM updater app; then on reboot, my phone would not boot into the OS (stuck on logo, before loading screen). So I tried to overwrite the phone with cyan again. It wouldn't work so then I was left to flash the phone and start over. Upon flashing, I got that b#$6h of an error. Then the "RUUNBH".
Now upon turning on my phone (In any way) it comes to the colured screen. When I try to flash a nbh, I get the "not allow" because my SD card needs to be a gold card.
The only method now is to gold card my SD. Which I cannot figure out anymore because all the methods I would need a WinMo phone or an working Android phone, neither I have access to.
In short, does anyone know how I can get a SD card's CID without a phone. I DO have a laptop with a sd card reader and CAN get access to a external USB sd card reader.
Any help?

Blake.AnRKist said:
I am in a bad situation with my rooted, now semi-bricked G1 =[
I had cyanogenmod and RA recov. I installed a new theme directly from the CM updater app; then on reboot, my phone would not boot into the OS (stuck on logo, before loading screen). So I tried to overwrite the phone with cyan again. It wouldn't work so then I was left to flash the phone and start over. Upon flashing, I got that b#$6h of an error. Then the "RUUNBH".
Now upon turning on my phone (In any way) it comes to the colured screen. When I try to flash a nbh, I get the "not allow" because my SD card needs to be a gold card.
The only method now is to gold card my SD. Which I cannot figure out anymore because all the methods I would need a WinMo phone or an working Android phone, neither I have access to.
In short, does anyone know how I can get a SD card's CID without a phone. I DO have a laptop with a sd card reader and CAN get access to a external USB sd card reader.
Any help?
Click to expand...
Click to collapse
Buy a cheap winmo phone? Something that has whats required. There has to be an old one that can do it for like 20 - 30 dollars. I don't think it's possible otherwise.

I think it may be possible to get the CID with a sdcard slot (not USB), usually within a laptop. Recently, I found this: jo0ls-dotnet-stuff.blogspot.com/search/label/SD%20Card%20CID
I used his source and threw in a couple lines to debug why it wasn't working, but it seems the laptop I own doesn't have a support SD card slot, so I will have to go see someone who has a internal SD slot on their laptop.
A winmo phone for $30?... By any chance of pointing me in the direction of such item(s)? (I am Australian)

SuperCID
Though this thread is for the Topaz, IMO pt 5.1 and especially pt 5.2 are interesting for you;
http://forum.xda-developers.com/showthread.php?t=530335
Success,
Senax

Senax said:
Though this thread is for the Topaz, IMO pt 5.1 and especially pt 5.2 are interesting for you;
http://forum.xda-developers.com/showthread.php?t=530335
Success,
Senax
Click to expand...
Click to collapse
Thanks for your suggestion. But it is possible that you would still need to get her a CID. I am wondering if it is possible to overwrite the whole SD card through the tool that is used to edit your SD card and into a 'goldcard'.
I PMed the person who was recommended in that thread, fingers crossed.

SD card reader that can read SD/MMC 32 bit CID
Hi There
I think this might be useful to anyone that sits with the problem of reading the 32 bit serial number/CID of a SD/MMC card.
I have managed to get firmware written for the Addonics eSata/USB multi-card reader model AEPDDESU with a small application that will read and display the CID number.
There is no other way to read the CID number through USB on PC other than having the the chip set inside the reader relay the information back to the host when it receives an application defined command,like for instance DeviceIoControl.
If anyone is interested drop me a mail and i will gladly mail u the firmware + utillity .One will need to buy this drive though.
Take Care

switzblade said:
Hi There
I think this might be useful to anyone that sits with the problem of reading the 32 bit serial number/CID of a SD/MMC card.
I have managed to get firmware written for the Addonics eSata/USB multi-card reader model AEPDDESU with a small application that will read and display the CID number.
There is no other way to read the CID number through USB on PC other than having the the chip set inside the reader relay the information back to the host when it receives an application defined command,like for instance DeviceIoControl.
If anyone is interested drop me a mail and i will gladly mail u the firmware + utillity .One will need to buy this drive though.
Take Care
Click to expand...
Click to collapse
Were you successful in creating generic code that works with all card readers?

Hi !
I've just visited this forum. Happy to get acquainted with you. Thanks.

droidzone said:
Were you successful in creating generic code that works with all card readers?
Click to expand...
Click to collapse
Dear friend.
I am looking for solution to read Serial No from SD card. I made special software which is runing on every pc on out company an check all inserted USB memory keys. Then compare serial no with database and if not registered is used we get warnings on IT section that not registered usb key was used.
Unfortunatelly i have problem with sd cards because i always get serial number of card reader and not serial no od SD card.
Is there some way to get serial no from SD card via Card reader? Can you send me the model of card reader which is possible to read this SN + Software?
Is there some dll or component for reading usable for .net visual basic?
Thank you for informations.
Marek

SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market

sd tester
there's sd tester sd122 by u-reach, which displays cid info...sold on amazon

I applaud you!!!
wordsleft said:
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
Click to expand...
Click to collapse
You are my savior!!! Thank you SOOO much for this! I have spent several hours trying to find something for the PC, but they all crash or just don't work. Cheers!!

DONE
wordsleft said:
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
Click to expand...
Click to collapse
Thanks a lot dude, i tried so manythings in PC with a card reader, nothing worked, but htis worked for me, thanks again, :good:

Write or modified Cid of sd card ?
Translated with google translation
Hello you know how to modify the cid of a card sd ??
thank you in advance

[Q] after partitioned cd card - HELP!

Hi,
I partitioned my sd card by this software - MiniTool Partition Wizard Home Edition
to 2 partitions: EXT3 -1GB and FAT32 - 7GB.
(SD card of 8 GB)
now, my HTC Desire doesnt upload and stuck on the screen of my rom.
i tried to upload it with no sd card ad it stuck on the HTC screen.
i cant format the sd card by the recovery.
HELP!!

have you tried using super wipe?
it should fix the partitions and if not that have you tried putting it into a computer and formatting it there?
http://www.mediafire.com/?rx2jhzabvlca5ae (Superwipe)
instructions here: http://forum.xda-developers.com/showpost.php?p=9126707&postcount=1

thnx for the fast commet.
but how can i upload this zip into the sd-card?

in recovery mode usb toggle drop it in the sd and flash....
follow the instructions though
or hook it up to the laptop like the normal and copy and paste either one

but i cant load files into the sd card by the computer..
it pluged it to the computer, but its only charge - i cant load files on the sd.

is that with or without an sd adapter?
does your sd show up?
have you tried to repair your sd by recovery...i think its under partition
because i had that problem once...well without the getting stuck screen...what about your nandroids though?

butch87402 said:
is that with or without an sd adapter?
does your sd show up?
have you tried to repair your sd by recovery...i think its under partition
because i had that problem once...well without the getting stuck screen...what about your nandroids though?
Click to expand...
Click to collapse
when i plug the phone to the computer it recognize it and in my computer i have : Removable Disk(H: ), but when i click it said : please insert a disk into Drive H.
i've tried to format it by recovery and it said "cant mound sd card"
i've no nandroids because i cant take after doing this.
what can i do?

Matanm said:
when i plug the phone to the computer it recognize it and in my computer i have : Removable Disk(H, but when i click it said : please insert a disk into Drive H.
i've tried to format it by recovery and it said "cant mound sd card"
i've no nandroids because i cant take after doing this.
what can i do?
Click to expand...
Click to collapse
do you have an sdcard reader so you can try useing the card on the computer without the phone if not try taking the card out then going into recovery putting the card back in and then go into recovery again and try to format that worked once for me

ok have you tried formatting on the computer instead of the memory card?
also a friend of mine should be coming on to help in a lil but try to format on the computer...
if not turn off then take out sd card and try again

i've no sdcard reader, ill buy it tomorrow.
ive tried to format sd card in the recovery with no sd card, and than with sd card and it didnt work.
theres another way?
thnx very much to both of you!

hopefully that works man

thnx very much!
theres no another way to format it? by adb or something?
but how can i use adb? when i tried to install the Desire's Drivers its not working.
can i use it ?

Matanm said:
thnx very much!
theres no another way to format it? by adb or something?
but how can i use adb? when i tried to install the Desire's Drivers its not working.
can i use it ?
Click to expand...
Click to collapse
i think you can format in adb but i have avoided learning adb sorry also if when you format it on the pc that me show that maybe your recovery is messed up could be if iam not wrong

ok i can use adb while the phone plug.
what i should write to format the sd card?

someone knows the command to format the sd card by ADB?
plizz

so your good now right?

Damaged memory card try reformatting

This is my first post ,,plz hlp.
here is what happened:-
i rooted my phone 2 years ago and have been using ICS rom on my htc pico i.e. explorer with twrp recovery from 5 months and yesterday outofnowhere my rebooted automatically and stuck on htc logo then i went into recovery where i realized that it was unable to mount.
I connected to my pc with phone in recovery mode but i was not able to see the card detected by pc bt somehow i used recovery software to recover files which worked then after sometime i disconncted and reconnceted my phone to pc with phone again in recovery mode then somehow in my computer i was able to see removable disk and on double clicking it i was able to format it. At this point i would say my problems were gone ,in recovery mode i was able to see my sd card but then i do a TERRIBLE MISTAKE. I partitioned my memory card from the partition option in twrp recovery and then it was back to damaged state(me mentally damaged ). I tried evreything i tried before,but nothing helped,even the recovery software which detected my mem card previously now didnt detect it
Now my computer is also not showing it even the " removable disk" which it showed previously somehow and i was able too see it.
but the thing is in diskpart when i list volume
i am able to see it with 0 kb capacity which i was able to see before also and now too,but now i am not able to see it in my computer
thing i did:-
- flashing another recovery but it didnt work
- wiping in recovery mode
- chkdsk
And yes it had ext 4 partitioned as the ICS rom's prequiste was 1 partition but dat wud not be the problem as i hav been using it for 5 months and aslo i had formatted it after recovery.
plz help me its a class 10 samsung sd card and i want to use it
Thanks

Shawnbam said:
This is my first post ,,plz hlp.
here is what happened:-
i rooted my phone 2 years ago and have been using ICS rom on my htc pico i.e. explorer with twrp recovery from 5 months and yesterday outofnowhere my rebooted automatically and stuck on htc logo then i went into recovery where i realized that it was unable to mount.
I connected to my pc with phone in recovery mode but i was not able to see the card detected by pc bt somehow i used recovery software to recover files which worked then after sometime i disconncted and reconnceted my phone to pc with phone again in recovery mode then somehow in my computer i was able to see removable disk and on double clicking it i was able to format it. At this point i would say my problems were gone ,in recovery mode i was able to see my sd card but then i do a TERRIBLE MISTAKE. I partitioned my memory card from the partition option in twrp recovery and then it was back to damaged state(me mentally damaged ). I tried evreything i tried before,but nothing helped,even the recovery software which detected my mem card previously now didnt detect it
Now my computer is also not showing it even the " removable disk" which it showed previously somehow and i was able too see it.
but the thing is in diskpart when i list volume
i am able to see it with 0 kb capacity which i was able to see before also and now too,but now i am not able to see it in my computer
thing i did:-
- flashing another recovery but it didnt work
- wiping in recovery mode
- chkdsk
And yes it had ext 4 partitioned as the ICS rom's prequiste was 1 partition but dat wud not be the problem as i hav been using it for 5 months and aslo i had formatted it after recovery.
plz help me its a class 10 samsung sd card and i want to use it
Thanks
Click to expand...
Click to collapse
use an adapter to put the card in your pc, then get a program for your pc to format the card properly, then put the card back into your phone.

thanx man it helped but instead using card reader i used nokia basic phone as i was not having card reader and nokia phone worked as card reader but now i have another problem ,, had partitioned it using twrp recovery and out of 14.8 gb i partiitoned 1.2 gb so remaining is 13.5 but now the problem is dat in mini partition i can see 13.5 usable and fat32 but remaining is umallocated it says,and when i delete both partitions and create partition after applung successful msg comes but i see a bad disk error and when discoonect and reconnect again ,i again see a primary 13.5gb and unallocated 1.2 gb//
plz help

Shawnbam said:
thanx man it helped but instead using card reader i used nokia basic phone as i was not having card reader and nokia phone worked as card reader but now i have another problem ,, had partitioned it using twrp recovery and out of 14.8 gb i partiitoned 1.2 gb so remaining is 13.5 but now the problem is dat in mini partition i can see 13.5 usable and fat32 but remaining is umallocated it says,and when i delete both partitions and create partition after applung successful msg comes but i see a bad disk error and when discoonect and reconnect again ,i again see a primary 13.5gb and unallocated 1.2 gb//
plz help
Click to expand...
Click to collapse
buy an adapter and fix it properly on your pc. adapters are not expensive, im guessing less than $5. a lot of sd cards come with them when you buy it.
plus, when in pc, you can use tools to check the card for errors and bad sectors. maybe partly bad, thats why you are having problems.

Okay now I got an adapter but still no use,, I cannot use chkdsk as some error comes, diskpart clean shows io error
Help.....

bweN diorD said:
buy an adapter and fix it properly on your pc. adapters are not expensive, im guessing less than $5. a lot of sd cards come with them when you buy it.
plus, when in pc, you can use tools to check the card for errors and bad sectors. maybe partly bad, thats why you are having problems.
Click to expand...
Click to collapse
rply plz

m3 data hunter with recovery
SM-N920C cihazımdan Tapatalk kullanılarak gönderildi

Shawnbam said:
rply plz
Click to expand...
Click to collapse
along with the previous suggestion, you can use this to make sure its genuine, and it will report bad sectors and other things.
you should use this first to make sure there are no issues with the card before attempting to fix something that may not be fixable.

bweN diorD said:
along with the previous suggestion, you can use this to make sure its genuine, and it will report bad sectors and other things.
you should use this first to make sure there are no issues with the card before attempting to fix something that may not be fixable.
Click to expand...
Click to collapse
thanx ,got to knw about this useful app but thn too it doesnt wrk sadly...... I think my mem card is special ,one moment i had my data recovered n the next moment i paritioned it by other way which i was not used to nd now its unmountable in my phone and the computer cant even format it.. Even H2testw fails here to even start its process of writing.. Everything everyone is telling is not working,,som1 who hav had dis problem shud see ,,and plz give me suggestions except which i tried
i want my mem card back :crying:
the common ways are not helping like diskpart and clean even normal format option frm pc is not working and not even h2testw...this proceses are so useless currently for mem card dat dey cant even initiate their action cuz som or the other error comes...maybe theirs very basic thing we r missing but duno wat
plz plz hlp