Related
I'm going to be crazy, The last 8 hours I tryed several times to change, update to the last Dopod ROM, I mean IPL 2.15 _ SPL 2.15.0001 but no way. Please somebody willing to help me.
Now I can find on welcome screen this information:
IPL 2.09
SPL 2.15.0000
GSM 02.19.21
OS 2.15.13.27
Thank you in advance!!!!
Dear cidriver:
You've to use the ROM that ends with "novendor" like ftp://ftp.xda-developers.com/Prophe...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
This is fine for you.
Try it. :wink:
Thanks a lot, I didn't try this ROM because moths ago I use the CID unlock.
Now I downloading the ROM you mentioned in your post, the ROM with no vendor id. As soon as I finish I'll post the result.
Once again, thanks a lot! :wink:
No way, my screen shows the same information as I mentioned.
IPL 2.09
SPL 2.15.0000
GSM 02.19.21
OS 2.15.13.27
My question is; I would to to make changes from the:
IPL 2.09 to 2.15
SPL 2.15.0000 to 2.15.0001
My device is already CID unlock. I' ready to make every change you tell me. Please, I try several ROMS without efford!!!
i find that the number of IPL shown in bootloader is 1.000....
IPL 1.000
SPL 2.15.000
GSM 02.19.21
OS 2.15.23.27
is there any problem to upgrade to AKU3.3.?....
i did a little search in this forum...and IPL for the others are always 2.xx.00x...
i know that i have a G3 modal....and i 've unlock the CID...(but i wonder if i did it successfully...)...
push~...help me
I've experienced it but no solution unfortunately...
There should be no problem, just make sure you update to a 2.20 ROM first before you start upgrading to an AKU3.x or WM6 ROM
My IPL after unlocking and upgrading to WM6 remains 1 but SPL is 2..how to make both of them 2?
I posted IPL 2.10 for G3 search for it
nope...no problem at all...
mine had a plan upgrade IPL/SPL to 3.08
haven't tried it...
but mine already aku 3.3
it works fine..as he said,don't forget upgrade to aku 2.2 as "starters"
what's the purpose and benifit to ungrader over IPL 1.0?
exe read what do IPL and SPL mean in the WIKI, it is like the BIOS of the mainboard in PC, basic inpot output system
I did as you suggested and found nothing regarding IPL SLP in the wiki. Lots of link on there does not display anything when clicked.
i have the 818pro upgrade to 2.20.
how to downgrade to before 818pro spl.
now i try to upgrade to 818pro 2.15 rom, but cannot. why ?
i need to help ... pls
High IPL/SPL Version wins! You cant downgrade!
Hi wg132,
You can downgrade if your device is a G3.
Check if your IPL/SPL end with x.xx.0000 (x.xx.0001 are G4)
Firstly, you need to CID unlock your device by flashing rom using
pdamobiz.com_downgrade_and_unlockcid rom.rar
(Please note that this rom is not usable and serve only to unlock CID)
You can then downgrade your SPL to 2.15 using
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip
I don't have the links to the above files. You need to search for them yourself. Hope this helps.
wg132 said:
i have the 818pro upgrade to 2.20.
how to downgrade to before 818pro spl.
now i try to upgrade to 818pro 2.15 rom, but cannot. why ?
i need to help ... pls
Click to expand...
Click to collapse
Why do you need to downgrade SPL 2.20? Is there any specific problem with that SPL? so far my SPL 2.20 is working well with WM6 and WM5. I wouldnt touch IPL and or upgrade SPL to 3.xx
kenxu said:
Why do you need to downgrade SPL 2.20? Is there any specific problem with that SPL? so far my SPL 2.20 is working well with WM6 and WM5. I wouldnt touch IPL and or upgrade SPL to 3.xx
Click to expand...
Click to collapse
What is IPL and SPL?
BIOS ... Bootloader ... Radioloader
if i have 3.08 can i do this?
no ... higher version number wins and the next ... spl 3.08 is charmer ... it means no prophet spl can flashed back!
can i flash it with another charmer?
uhm ... if you want brick/damage your device ... sure
this are a modded spl to run on prophet! highest prophet spl is version 2.58 and only for g4. nobody have uploaded in the moment!
hi all.. just a little question here.. im using dopod 818 pro G3. as far as i read in this forum.. all mention that ipl 2.20.0000. but why my ipl is only showing 2.20 and no 0000 at the end? is that common or something wrong with my dopod 818 pro?
Hello everyone,
I'm totally lost in this WM6 upgrade.
I've tried everything but i wont get my MDA Vario to flash with WM6.
My MDA Vario is unlocked (sim and CID) but i can't flash it because of my SPL 2.21????
This is what i have done:
installed button's 1.05 ROM
Download & installed lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
But stil my SPL is at 2.21.
Can someone please help me out here??
Thanks in advance!
Regards,
Schmia
Both your IPL and your SPL must be 2.xx and higher. After you flashed to Buttons rom. did you reflash to a higher version after after you unlocked and cid unlocked your phone to make sure both IPL and SPL were 2.xx or higher?
I've followed the tutorial:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
My IPL was 1.XX after the 1.05 downgrade, but my SPL was still 2.21 even after the rerun.
I have tried to instal T-Mobile 2.26 rom, but it gave an error.
check if you have G3 or G4 unit
I have a 3G device.
Is there nobody who can help me???
schmia said:
Is there nobody who can help me???
Click to expand...
Click to collapse
I think that you haven't unlocked the phone properly. Read Dr. P's tutorial about unlocking G3 phones.
Kirby
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
mfrazzz said:
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
Click to expand...
Click to collapse
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Cing 8125 said:
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Click to expand...
Click to collapse
The Dr. P tutorial specifically says this (just not in those words). It tells you (after the last lokiwiz) to watch your screen and that you most likely will still have an SPL of 2.xx and will need to reflash (most people just don't read this and try to move on). The part of about having to reflash numerous times is new though. I've only heard of it a few times, but if you look at the posts from a month or so agao in the Dr P thread on unlocking you'll see where a few people ran into it and it took numerous flashes to finally get SPL to go to 1.xx.
before wm6 roms, every time there was a new rom for wm5 (molski or faria) you'd always get people in the thread mentioning that their ipl and spl are different. in those threads, the advice has always been to reflash a few extra times too. (I personally haven't had any problems with this...but i think i started my unlocking on a 1.8 us t-mobile rom with xelencin's rom...which had an unlocker built into the rom update package).
anyway, the phone's not bricked or anything, so you just have to keep flashing to get it working...
xelencin's rom (the first rom I ever flashed...)
http://forum.xda-developers.com/showthread.php?t=274205&highlight=xelencin
monkey_knight said:
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
Click to expand...
Click to collapse
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
schmia said:
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
Click to expand...
Click to collapse
yes. ipl and spl should both drop to 1.05. at that point you can go through the unlock and flash back up.
Thanks Guys!!!
With all your good advise, i finally have my MDA Vario flashed with a WM6 rom (TNT 2.0 Professional)
I'm really greatfull to you!
Now i have to find out what WM6 rom is the best for me.
Regards,
Schmia
i am having problems flashing some OS, and i cant even touch IPL SPL and Radio...im pretty sure i unlocked...but it might have failed...note that i have been able to do all of these things before...any assistance is appreciated
...update...
got the IPL and SPL to update just taking the .nbk and plugging it into different old OS's...tried radio in same place i pluged IPL SPL and no luck...any suggestions?...
Look at the unlocking post in Wizard Upgrading subforum, download the Button's 1.05 ROM to have IPL and SPL downgraded to 1.05, then you can unlock and flash other ROM.
However, since you are now at 3.08 IPL, it may not be easy to have SPL downgraded. Don't try to unlock if IPL is 1.01 and SPL is 3.08. Instead try to flash again until SPL downgraded
the thing is ive been able 2 flash any rom i choosed b4...and i have went threw the unlocking process before...so its not that...
also r there any roms made to b flashed on vista and xp?