Related
Hi guys.
I did it... i screwed up my QTek S100! I tried to upgrade it, maybe the wrong files, dunno... now it is *dead* ! I only get a dark screen with "SERIAL V1.00" or "USB V1.00" if docked (should be bootloader mode). Nothing else.
Would you please be so kind as to help me in recovering from the disaster ? I do not have any backup, nor ROMs. I own a 512 MMC.
I would need English Roms... pleeeese !!
Thanks a lot.
Silver
Do you still have the files you used to upgrade? What's the name of the file?
Also, leave the info on your previous ROM.
I had the same problem with my Qtek S100 when upgrading it with the new firmware. The upgrade process stopped/crashed the first time leaving my unit in the same state you're describing. But, what I did was simply to run the upgrade utility again and then it worked fine the second time.
I don't know where you're from but if you have a swedish unit like me you can get the latest upgrade utlity from this adress:
http://www.smartmobile.se/upgrade/upgrade.aspx
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
slvrbllt said:
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
Click to expand...
Click to collapse
Looks like the same happened to me. Try to open battery cover (or remove battery for several second. Then put everything back and push Power button. Does it turns on (with hard reset)?
Nope buddy! The OS is gone! Whatever I try to do, it always starts in Bootloader mode (Serial V1.00/USB V1.00).
Try removing the battery for 30 minutes (or whatever time it takes for the backup battery to discharge). That should recover your previous configuration although I haven't tested it.
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
slvrbllt said:
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
Click to expand...
Click to collapse
I would like to try upgrading my JAM...but now I`m affraid a little bit... :roll: Have U tried to update with the latest S100 ROM...the swedish one?...or the I-mate JAM WWE ROM...?
Regards,
Primoz
Backup ROM
Is there a way to make a backup of my rom?
I have the qtek s100 with english rom.
Purchased seperate.
rom 1.03.00 WWE
radio 1.05.00 (upgraded)
extrom 1.03.100 WWE
Had the same issue with my radio version upgrade.
Scared the hell out of me ...
Backlight did not lit up ...
And an error apeared on my pc ...
But I was able to upload it when I tried again and the sync program of ms was killed.
If anyone knows how to make a working back-up ...
I like to help.
Think it's interesting to see how everything works.
And ofcourse, if you worked it out already, let me know how ...
And what macrinus said wont work.
When you do a hard reset, you do exactly the same.
So I think it's all gone.
why not dump the os to sd card, ntrw to pc and then put the nb1 fille in the ftp........
Tell me how ...
Tell me how, and I will ...
Sounds like chinese to me buddy.
Just got this pocket pc for 3 days.
First time I use a ppc.
Is that with xbackup?
Then choose all data?
Or do you mean another way?
What is ntrw?
And how do I get it from the backup?
And also, how is he suposed to upload it to his ppc?
Am asking this all to get to know it for myself.
Need the basic information before I can actually do all this ...
ok, sorry, if you are new to this forum, maybe its time now to browse this forum using the "Search" . There are hundreds or maybe thousands really good topics / advices available in this forum, posted by experts.
I and hundreds others I think, have really learn a lot from this forum.
On this specific topic you can search for :
- dump rom
- bootloader / bootloading.
You can also go to this forums ftp : ftp://xda:[email protected]/
to download all the necessary files
pls be patient and enjoy the tour......
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
More detail please...
Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II
well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%
its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?
it says just usb and v1.0
it tries to flash and then stucks at 7%
new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N
please help!!
Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT
Did you try a google search? I found this related to error 112...
Thanx, trying possible Fix!!
aahh it doesnt work... please can anyone help more??
tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???
can i get some help? please =(
i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?
Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.
close this thread plz
OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have youtried with a previous Tomal ROM?
It worked for me in a similar problem
Good luck
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have you removed your SIM and SD card, before trying to re-flash?
I did
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Pls anybody help me too! same problem stuck up and updating stops at 7%
giving ce rom update error?
Do a hard reset first and clear the phone by pressing 0 when promted
report back
kotabunga said:
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
Click to expand...
Click to collapse
Try to flash each part one at a time, not all of them at the same time.
Note that this ROM do not work with some extended rom and that blank page at first was the reason of that. Flash your extended rom with the tomal's own extended rom. You can find it...(oh no it has been removed, I will try to upload it for you). After flashing the extended rom try ato re-flash the rom and at last try to re-flash the radio (If you need it). Beware that flashing extended rom will erase your own extended rom so try to find one and decode its files to have your customization files back...
Hope it works
I have problem uploading file try to search for "Tomal_extrom" yourself and I will try to upload it...
Tried to flash Tomals ext ROM...but wont work too....I'm hopeless, maybe I should say goodbye to my uni,.....
same
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
digitalir said:
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
Click to expand...
Click to collapse
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
pls give the action step by step, im very hopeless
tomal said:
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
Click to expand...
Click to collapse
pls can u tell me the process to do it?
thnks
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
ultravox said:
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
Click to expand...
Click to collapse
mtty do not format radio rom, so you don't need to re-flash it.
No progress
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
AS means active synchronize. Disable USB connection in AS. It has been written there bro...
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
my friend,
active sync AS
ok
well i am just back on my chair so looking forward to do it right away
will keep u posted
tried ! but in vain!
yes i have already gone through the wikipage and tried it but after typing the command it just says its invalid command.
i have tried all the ways i can with mtty given in wikipage with no results positive.
pls can anybody suggest the commands for doc format
again thnks
hey!
after much gogling i got mtty1.16 and tried but it does not show the usb port.
so again googling does it support usb 2.0
i think it doesnt.
ok i will try on my old laptop with usb 1.1 tonight at home.
Tomal 1st thnks for ur help and valuable time
can u pls give the details for properly formatting the doc [pls.
any luck ? I dont....my uni still dead...tried with usb 1...no luck...
hi can u guys pls help me out.. my phone cingular 8125 shows 3 colors whenever i turned it on.... is there a way i could fix dis... because what i did was, i was trying to upgrade it to wm6... but it was failed because there was an error... pls help me out i will really appreciate it if u guys will....thank you...
....thank you for you guys's help... i was trying to put my phone into bootloader form and it did... then in couple seconds my phone turned off and couldnt turned it back on... idk whats wrong with it...my phone is dead....
Read this thread: http://forum.xda-developers.com/showthread.php?t=276963
rbt_vird18 said:
hi can u guys pls help me out.. my phone cingular 8125 shows 3 colors whenever i turned it on.... is there a way i could fix dis... because what i did was, i was trying to upgrade it to wm6... but it was failed because there was an error... pls help me out i will really appreciate it if u guys will....thank you...
Click to expand...
Click to collapse
Download and flash official cingular stock rom in Bootloaders,it'll recover back to its default status.