Hi,
I have been on this site for about a week now. I was drawn here by the desire to take my Imate JamIn up to WM6.
So I pulled from the web the file:
RUU_Prophet_220734_2207114_024721_NVID_QTEK and hurled it onto my PDA
It went from Imate to QTEK but still worked pretty well. So I then went and loaded Upgrade Happy from a site in Roumania.
This loaded but was distinctly unimpressive and unstable so I managed to downgrade to the WM5 file above again.
Then I tried Smart1's v2 WM6 file and this went on OK. However, I have experienced a few issues with the battery and other things like Timewizard, etc.
So I have gone back to the NVID_QTEK WM5 file again.
BUT I would really like to put back on my Imate ROM which I have stored away. Sadly, whenever I try and load the ROM it states that the version is lower and I can only do an UPGRADE ( I get a 286 error).
I have searched here and Google and think that I can Un CID my phone (not actually sure what this does mind). I have read posts suggesting that once done I can load any version of any Prophet ROM on my PDA.
I went off and ended up on PDAMobiz and pulled down a file called:
PDAMobiz.com_ProphetAKU2_unlockCID.rar
But this site is incredibly slow and the file is corrupt when I finally get it down.
Can anyone explain to me whether it is possible to get to reload my earlier ROM version Imate ROM? If it is can anyone explain what I need to do and perhaps put up a link to an area where I can pull the tools down.
This website has a great reputation for helping each other out and I am sure that my ignorance will be forgiven,
Kind Regards,
Sam.
Hi
This is because you have upgraded your ipl/spl and these can't be downloaded.
But don't worry it's not a problem
if you have the original rom you should have a .nbf file?
You can use typho5.exe -x xxx.nbf (whatever it is called) this will extract the individual elements (ipl/spl/os/extrom/radio/splash screens) as .nb files.
Then use nb2nbf to build a new nbf file without spl/ipl parts. copy this file back to your backup folder (rename the original one first) and install again
Good Luck
Thanks - I have just a couple more dumb questions...
FlykThewiz,
Many thanks for your help.
I have the file:JAMin_WWE_213923_2139123_022021_shi.exe
Do you know how I get the .NBF out of it?
Also,
You couldn't point me to the tools you mention could you?
If I do what you said then do I get back my own Imate Splash screen too?
Do you know if I will suffer any problems with things being different versions?
Once again many thanks I will let you know how I get on.
Kind Regards,
Sam.
You can use winrar (free download - search google if you don't have it) to extract the files in your exe.
One of the file will be the nbf.
I will sort out the instructions for you but I have to go out for a couple of hours at the moment.
T H A N K Y O U
flykthewiz,
You are simply The MAN
Many, Many thanks,
Sam.
I don't know about being the man - i had the same problem myself.
Attached is a zip file with the two tools you need.
I suggest you create a folder called c:\rom and copy the contents of your exe file and these to programs into it.
goto a dos cmd window and cd \rom
type "typho5 -x nk.nbf" (no quotes)
you will then have a number of *.nb files in c:\rom
rename nk.nbf to nk.org
send me the list of nb files you have.
ZIPPED with winzip 12
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Splash Screens
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
secoseco said:
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Click to expand...
Click to collapse
FlykTheWiz,
Thanks for the tools.
The files I have are as follows:
30/03/2007 13:50 59,768,832 80040000-OS_0.nb
30/03/2007 13:50 786,432 91000000-SPL_1.nb
30/03/2007 13:50 786,432 91000000-SPL_2.nb
30/03/2007 13:50 196,608 92000000-Splash.nb
30/03/2007 13:50 2,621,440 96000000-GSM_0.nb
30/03/2007 13:50 10,485,760 9b000000-Extension.nb
30/03/2007 13:50 65,536 9d000000-HTC.nb
28/03/2006 15:51 74,713,088 nk.nbf
16/09/2005 12:20 53,248 nb2nbf.exe
13/03/2006 19:09 784,972 typho5.exe
I have loaded up the nb2nbf file but have no idea what to do with it - The only option appears to be for a Tornado...
Thanks,
Sam.
Ok
fill in nb2nbf like the image in the attached zip file.
Important notes:
1. use the ... browse buttons to select your files and the length field will be filled in for you (the image shows mostly zeros)
2. the image name for the extended rom is Extension Rom (not Extended) and you have to type it manually - its not in the drop dow list.
3. the start address for OS.nb is 80040000 (not 82040000 which the program defaults to)
4. you need to manually type HTC Logo in image type - its not in the list.
Do not add the ipl and spl files! (these are the ones that are causing your problems)
When its all filled in click on Translate and when that is finished exit the program.
If you have copied all of the contents of your extracted exe to c:\ROM you should have a program called ROMUpdateUtility.
Connect your pda to usb and run this program and follow the instructions (you've done this before )
After its finished your phone will hard reset and you should have your original ROM.
It doesnt matter that ipl and spl are different versions
Good Luck
flykthewiz said:
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
Click to expand...
Click to collapse
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Yes you can
secoseco said:
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Click to expand...
Click to collapse
Nearly there
FlykTheWiz,
Many thanks for the instructions. I have done what you suggested with NB2NKF
However, When I try to run my RUU utility I get error code 238 Cannot Read the file.
I extracted all files into a single directory and replaced the default .NBF with my new one. Then ran the RUU tool.
Am I being a numpty?
Many thanks,
Sam.
hmmm
Try the appropriate RUU from the attached
If your ipl ends in .000 use G3 version
if ends in .0001 use G4 version
T H A N K Y O U
I would just like to thank you for your kindness and patience. I have now got the HTC device reblown to the original condition that I started from (with the exception of the IPL/SPL).
Using the G4 utility worked for me.
On the way I have learned a great deal and appreciate your assistance.
Thank you very much,
Sam.
No problem at all
flyk (definitely) thewiz !!!
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Mozzerr said:
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Click to expand...
Click to collapse
help for step by step help for change boot logo imate jamin
Hi all:
1. how to extract tools.zip on pc
2. my pda (i-mate jamin) and update smart1-new v2 . don't like change i-mate boot logo to Qtek how to change boot logo to original i-mate jamin?
thanks for step by step help.
"...a long while..."??? I don't think so!!! Still, your openess and willingness to share what you have learned in such a short while is refreshing to see on this forum!! I still say T H A N K Y O U ! !
flykthewiz said:
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Click to expand...
Click to collapse
Since this is my first post, please correct me if I have posted to the wrong forum...
I am looking for a way to manually change the windows start logo. I think I found the bitmap that contains the image (ppcom.bmp) But I cannot change or edit it... I seem to have the same problem with the stwater image.
(I don't want a theme generator, I want to know how it works...)
i believe it varies from device to device
Helo, jedi jerk
I have an Ipaq 2790.
The error message I get is that I cannot change (or copy or delete) things that are in the rom...
There must be some way to manually apply themes and get rid of that ugly old-style microsoft emblem. I'd already be hapy if it were the xp icon...
Thanks for the reply
Hello everybody,
This is my first post, so sorry if I'm not meeting forum rules and/or standards (I'm doing my best)...
I have a Kaiser bought through my cellular provider, it came with a localized, horribly slow ROM (click start menu, count to 10, menu opens... etc...).
After studying the wiki and forums I flashed it with dutty's 29/04 awesome rom and after trying each and every radio available found the only one that actually worked on my device.
Finally I synced the device with my PC and found that all my contact names (in my native language) are unreadable on the Kaiser (because it lacks the language pack that was supplied with the original ROM).
I have found on a local forum the NBH file of my provider's ROM and I know the language pack CAB is on it, under the WINDOWS folder (and should recognize my device as eligible license-wise).
Can anyone explain how can I get it from the NBH file (I REALLY don't want to go through the whole flashing process again). I tried playing with NBHExtract but didn't really succeed.
Thanks,
Dan
maybe u need this.
Cool, it worked and I managed to get the language pack installed!
Thank you!!!
Hi all,
Perhaps it is a newbie question so please bear with me.
I have an i-mate K-Jam flashed with TNT rom (build 20273). It works perfect and nice, however (frankly speaking) I don't like or want some of the APPs installed with this ROM, but I can't uninstall them.
I've searched this forum to find a way to extract the OS (OS only) from TNT rom so that I can flash my wizard and then install all the APPs I want, with no luck. Perhaps my search skills are a little poor...
So would someone please explain if it is possible or not? and if yes, how?
Thanks in advance.
Regards.
You cannot remove apps from a cooked rom. Search for Vanilla roms if you just want the base rom without any extras and then you can install you own apps.
well you can, but for that u'll have to dump the ROM first, remove the apps you dnt like and recook it
you can not dump the TNT roms. when you try, there are no RGU'S or DSM's.
You can dump my rom if you like, but you will get some missing files you will have to put back into the oem.
the missing files come from me not editing the rgu's when I cook.
try dumping Hornet5. for the most part you will get complete packages, but also some "missing files". just put them back into the oem/sys and recook.
Thanks for info. Saved me a lot of time.
I finally managed to cook my own rom. Everything works perfect except that:
1) I've used XIP, SYS and OEM files/folders of different builds. Am I going to have problem later?
2) "CommManager.exe" was missing. I've searched the files used in kitchen and the only thing I found is "commmanager.htm". Later I managed to download and install HTC CommManager but I can't assign in to its button (button 6). Is there any solution for that?
3) How may I extract the "splash screen" from one build, and upload it to my phone?
4) Bluetooth is not working. It says there is no bluetooth hardware on device. Also WLAN disconnects after a few seconds. How may I extract the drivers from original ROM and upload it?
I know the above questions are too much, but actually I'm so excited that my first attempt to cook a rom was successful (almost). I hope one of you experts be kind enough to help me solve the above issues and have a perfect phone.
Thanks in advance.
you will have some problems with the initflashfiles.dat in the oem, as well as the "oemtranslation.prvxml" or something which controls your icons for programs and control panel.
The best thing to do is use the same build OEM SYS & ROM folders.
If you dumped hornet 5, then your best bet ist to work with everything in it. I was working at this rom after Sleurhut for about a month or two.
mixing builds of those folders makes you start from scratch again fixing up your oem again.. and again.
as far as the missing files, try using the Xdump method; or use the searcher on your PC to find the missing files folder and the contents.
Dear S.V.I
Thank you so much for your ongoing support and help.
As I've mentioned before, I'm a total newbie trying to have a clean WM6.1 on Wizard. I've searched and read lots of tutorials here and there, but there are still lots of questions remained.
I tried to play with HyperCore (multi-device) today and I failed in the first step. I've extracted the "nk.nbf" from official i-mate KJam ROM using WinRAR. HyperCore is installed and I've a "C:\Core" folder as well as a "HyperCore" folder on my desktop.
The "DumpRom" is asking me to make sure the "nk.nbf" is in "HyperCore\Extract\Source" folder. Well it is there. Press Enter and the error message says: "There is no nk.nbf in Core\Extract\Source".
No it is not. First, it asked me to put it in "HyperCore\Extract\Source" not "Core\Extract\Source". Second, there is no "Extract" folder under "C:\Core". Even after creating Extract\Source under C:\Core and copying nk.nbf there, the same error message appears again.
So, what I'm missing here?
Same
I'm also scratching my head on this problem too. I've even tried creating extract\source folders in locations C:\core\ and desktop\hypercore\ but still no luck.
I'm wondering however that the issue could be caused by vista/7's change from Documents and Settings\user\desktop (2000, XP) to Users\user\desktop.
It may change the way the batch files are called but i'm really rusty on batch commands these days
I would start with the sticky "How to cook a ROM" thread, focusing on CRACING's kitchen, then move to Nekid Angel (Post #3)
where you will find a more updated ROM ready to cook. If you want to try WM6.5 a good ROM and kitchen is at [WM Kitchen] Wizard Kitchen or CRACING's RC6. I have been playing around with that.
You might move your discussion to one of the cooking or kitchen threads mentioned above, too, since that is where others will look.
Perfect
That's what i was looking for thanks for the heads up N2rjt!