Related
ATT SIM Manager
Posted this in Kaiser, with no luck so,
Anyone have a cab of the SIM Manager that you can access in programs?
Installed the one from dutty's cab thread,but the applet doesn't show up in programs or anything.
Any help?
Alemaker
Did you ever find this? I am looking too.
nope!
C'mon chefs, help out here PLEASE!
Alemaker
weinson said:
Did you ever find this? I am looking too.
Click to expand...
Click to collapse
Found the app in Alex's OEM pkgs, and asked Kyphur if he could make a cab out of it in his v1.2 thread. That's the best I've been able to come up with.
Alemaker
Here you go:
GarJones27 said:
Here you go:
Click to expand...
Click to collapse
thx, but that's the one we're having issues with. It'll install and give access to the SIM card but, the applet isn't there.
Alemaker
Maybe the older version will work. I'll put it up so you can give it a try:
make a cab from the 6.33 version please
After much help from Dutty (thanks!) I can now confirm that this cab (attached) will install SIM Manager 6.33 (even though under remove applications it says it installed 6.31).
Unfortunately, it does not automatically create a shortcut ... so after the install you will have to (a) find the exe file in your windows folder (remember to "show all files") and then (b) create a shortcut to drop into your "windows/startmenu/programs" directory.
Worked fine for me ... and thanks again to Dutty for educating me here.
ey man, If you don't matter, same CAB, with version corrected and link added
Cheers.
jcespi2005 said:
ey man, If you don't matter, same CAB, with version corrected and link added
Cheers.
Click to expand...
Click to collapse
Perfect - Thanks (if I could have done it myself I would have)
Ok so I loaded Alex's multimedia rom onto my 8925. Love it minus the fact that it had no sim manager. So I loaded the HTC sim manager onto the phone reset and nothing. I cannot find the files anywhere in any of the folders. I may have to manually find it in the phone, where would I look to do this? Windows file?
Any help would greatly be appreciated because right not I have no email address or business addresses and I am not about to manually type each in on my phone.
THANKS again in advance
To get Alex attention, is better to post this question in his thread...
There is no need to open a new thread, and this is not goint to get help quickly.
Cheers.
i was mainly hoping to find a alternative way to find the application
ok i manually located the simmanager.exe file in the windows folder on the phone.
I flashed my HD2 to the newest official ROM and i discovered that it's not possible to rename and/or delete system files like manila files anymore!
Why is this??
With my old ROM i could rename manila files to *.bak and then delete them using Total commander but with the new ROM this isn't possible! I'm really desperate, I don't know what to do!
Could it be that HTC made the new firmware more secure?
Any solutions???
I found out that I can't copy my welcomehead to the windows folder anymore...it just wouldn't let me...
there has to be a registry entry somewhere, just can't find it at the moment.
Benz-Driver said:
I flashed my HD2 to the newest official ROM and i discovered that it's not possible to rename and/or delete system files like manila files anymore!
Why is this??
With my old ROM i could rename manila files to *.bak and then delete them using Total commander but with the new ROM this isn't possible! I'm really desperate, I don't know what to do!
Could it be that HTC made the new firmware more secure?
Any solutions???
Click to expand...
Click to collapse
I dont have the phone yet or WM6.5 so I cant comment too much but you could try reflashing the rom and see how that affects things. Did you flash the rom using a gold card or just update an official rom?
Hi may i ask where you got this official rom update from? as i have not been able to find it on any htc website
omniajet13 said:
Hi may i ask where you got this official rom update from? as i have not been able to find it on any htc website
Click to expand...
Click to collapse
http://htcpedia.com/forum/forumdisplay.php?f=142
The official roms are in the sticky at the top.
mskip said:
I dont have the phone yet or WM6.5 so I cant comment too much but you could try reflashing the rom and see how that affects things. Did you flash the rom using a gold card or just update an official rom?
Click to expand...
Click to collapse
sorry for the noobness, but what does a goldcard do???? I have an image which was e-mailed to me after i placed my CID on a thread here. How do i go about using it. Is there anything on the web i can read up regarding this?
Sorry for hijacking your thread dude! Do what this guy says, try to re-flash your Rom and see if that helps.
[email protected] said:
I found out that I can't copy my welcomehead to the windows folder anymore...it just wouldn't let me...
there has to be a registry entry somewhere, just can't find it at the moment.
Click to expand...
Click to collapse
Rename your new welcomehead from welcomehead.192 to welcomehead.193 and copy it into the windows folder. Then use the Advanced Configuration Tool 3.3 (it needs MS Framework 3.5 to be installed to work) and go to Splash Screen. There you have to click the first green entry and change the path from windows/welcomehead.192.png to windows/welcomehead.193.png. Then Softreset. Now you have a new welcomehead, even with new ROM. Have fun!
v1xz said:
sorry for the noobness, but what does a goldcard do???? I have an image which was e-mailed to me after i placed my CID on a thread here. How do i go about using it. Is there anything on the web i can read up regarding this?
Sorry for hijacking your thread dude! Do what this guy says, try to re-flash your Rom and see if that helps.
Click to expand...
Click to collapse
look *HERE*
any idea how to solve this issue?
can't do anything in the windows directory...it always says files in this directory cannot be touched.
[email protected] said:
any idea how to solve this issue?
can't do anything in the windows directory...it always says files in this directory cannot be touched.
Click to expand...
Click to collapse
Make it the way i told you, you don't have to change something in the windows folder to have a new startup screen.
^I did it and it worked great. thanks
But there are some other issues...for example if you want to enable navi panel or hidden games you need to copy some files into the start menu folder but that is not possible because the ROM won't let you.
any solution for the others?
Hi everybody? I am trying to find a solution to a issue with sasimi on the new 6.5.X roms (with the start button on the lower bar). The issue is that sashimi cant install cabs to storage card. I searched the web and foud some ideas that u need to hack the sashimi.mrsc file but none of them was working.
Can anybody who succeeded in runing sashimi post his workoround? That would really help me. Thanks ion advance.
Nobody here uses sashimi?
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Man, I love you, thanks.
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
dagrim1 said:
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
Click to expand...
Click to collapse
no it will not working with 6.5, first backup SASHIMI.mscr original first for using later with 6.5
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
steveianson said:
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
Click to expand...
Click to collapse
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I'm so glad that it works again...
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Me too
It seems that the "SendSpecial ("Down")" is not working and the script may be hanging on the command, or something like that. You don't see the selection change, so it could also be the "SendSpecial("Space")" not working. Either way, the "SendSpecial("LeftSoft")" just after is obviously not firing. Not sure why it's different now, but it apparently is. There used to be a "SendSpecial("CR")" instead of the "SendSpecial("Space")", so I'll try that to see if it's working again (worked in win6.1, not in win6.5). Mine's been working just fine, up till the very latest Energy ROM on my CDMA TP2.
LightC said:
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Click to expand...
Click to collapse
I think it connected to the roms u are using. For me it worked with one rom, then I flashed other rom and I experencied the same thing as you.
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
secoseco said:
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
Click to expand...
Click to collapse
dingolino said:
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
Click to expand...
Click to collapse
You're right there off course
I am having no luck with the v8.0 of Sashimi. I have the Artemis ROM (WinMo v. 6.5.5).
Auto mode only installs cabs from cab/ASL folder. I replaced the Sashimi.mscr with the one posted in this thread but to no avail.
Do you guys have any suggestions?
me too,
sashimi doesnt install (not works) for new artemis v7. It install all my cabs from auto/SC to device becasue it can not move cursore down anymore..
any suggestions?
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
I'm surprised that either of the attachments on this thread works on HD2 Leo. I found that there is a very basic problem with mortscript and all sashimi scripts will hang. Two symptoms:
1) if not in flight mode, sometimes hangs during initialisation
2) if auto install to storage card, will hang (leaving you to select the radio button and press install)
and there is no easy cure.
padlad said:
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
Click to expand...
Click to collapse
thx m8,
i will try it
i'm on wm 6.5.x and sashimi stalls at SASHIMI INITIALIZATION COMPLETE.... HEEEEELP!
Hi there,
I am writing to look for kind help from you guys on the i601 which was wrongly updated with a i608 ROM and was caused to possess no phone function at all, though it can be powered on to the home screen with some basic functions like file exploring. Now it has no phone function, and lots of other functions like power signal, user configuration menu, and etc. are not working either. The worst is it doesn't respond when I connect it with my PC via ActiveSync (seems the USB port is not funcitoning as well).
I'm not sure what kind of information should be given to let you guys better understand the symptoms but here is a few of information that might be a little bit insightful:
By keying in *#1546792*#:
Windows Mobile 6 Standard
CE OS 5.2.1620 (Build 18125.0.4.2)
Radio Version 0
RIL Version 2.002
... ...
By entering into Setting mode:
PDA Version
i608ZTGI2
Phone Version
(it is left blank )
Eboot Version
i608ZTGI2
I would love to see if you can shred me a light if and how I can fix it. All kind of help is highly appreciated.
Thanks a lot.
Did You try flash with wce downloader? Your phone is recognized by Windows in BootLoader mode? correct? then flash with i601 rom
PS: sorry i don't use english - is not my default language... but i try
thorn_pl said:
Did You try flash with wce downloader? Your phone is recognized by Windows in BootLoader mode? correct? then flash with i601 rom
PS: sorry i don't use english - is not my default language... but i try
Click to expand...
Click to collapse
Hi Thorn_pl,
I am always grateful and thankful to see a reply from someone who are trying to help others. Thanks a lot in advance for your kind advice.
To be exact, now the phone cannot be recognized by ActiveSync after plugging in through the USB port. I check through the files inside the phone and found that many sub-folders under Windows are empty, such as:
/My Device/ConnMgr
/My Device/Documents and Settings/default
/My Device/Documents and Settings/Samsung
/My Device/Program Files/Connections
/My Device/Windows/Activesync/ (only one file named CtrlLog)
/My Device/Windows/Systems/ (only some empty folders like CertDtls, ConfigMgr, DumpFiles, SQM, CabQueue)
Can someone be kind enough to teach me how to at least make it connectable with ActiveSync so that I can try flashing again a ROM to this phone?
Also if it can be done, I need to locate where i601 ROM would be available.
Thanks in advance!!!
hi
u are welcome
if u turn your smartphone in bl mode and connect to usb - is recognized? if is possitive then flash it
sorry but i go somewhere to drink becuase i have birthday today
greetz
thorn_pl said:
Did You try flash with wce downloader? Your phone is recognized by Windows in BootLoader mode? correct? then flash with i601 rom
PS: sorry i don't use english - is not my default language... but i try
Click to expand...
Click to collapse
Hi Thorn_pl,
Sorry for bothering you again, would you tell me what you mean by wce downloader? Is it a program that I can use in my case? Where can I find this program?
What is BootLoader mode?
Where can I download official i601 ROM? I tried to search on web but couldn't find any info about this strange version - i601.
Thanks again.
thorn_pl said:
hi
u are welcome
if u turn your smartphone in bl mode and connect to usb - is recognized? if is possitive then flash it
sorry but i go somewhere to drink becuase i have birthday today
greetz
Click to expand...
Click to collapse
Happy birthday to you!!! Have fun and a good time!!!
i believe the i601 is the same as the i607... try flashing a custom i607 rom.
dermann said:
i believe the i601 is the same as the i607... try flashing a custom i607 rom.
Click to expand...
Click to collapse
Hi dermann,
Thankyou for the reply.
The first headache to me is now my PC doesn't recognize the phone through the USB port. I have been looking around on the web and found some Samsung USB Driver files and had them installed in my PC. But it doesn't help at all, my phone cannot be recognized correctly (a few times it was recognized as Unknown Device). So when I power on my phone on BL mode and link it with WCEDownloader trying to flash, the START button is disabled.
I don't know if there can be solutions to make my PC recognize the phone again and am really frustrated at the moment. The only good thing is now I basically know how to flash a Samsung mobile phone and have collected bunches of ROMs and software.
See if someone know how to troubleshoot it.
Anyway, thanks a lot.
ok I have an idea... but I'm at work at the moment. when I get home I'll see if my idea does anything. I'll let you know.
edit!!! was just thinking. what os is your computer running? xp, vista, w7...
if your phone comes up as unknown device, that's better than nothing. here's what i'm going to do... i'll up load the usb drivers from my 607, and we'll see if that changes anything.
edit#2!!! ok here they are, along with the usb registry. put .dll's in windows folder on phone and import the .reg using a registry editor. soft reset after you do all that. let me know how things go.
dermann said:
ok I have an idea... but I'm at work at the moment. when I get home I'll see if my idea does anything. I'll let you know.
edit!!! was just thinking. what os is your computer running? xp, vista, w7...
if your phone comes up as unknown device, that's better than nothing. here's what i'm going to do... i'll up load the usb drivers from my 607, and we'll see if that changes anything.
edit#2!!! ok here they are, along with the usb registry. put .dll's in windows folder on phone and import the .reg using a registry editor. soft reset after you do all that. let me know how things go.
Click to expand...
Click to collapse
Hi dermann,
Thanks for the valuable advice.
My PC is running on XP.
Last night i just uninstalled all the SAMSUNG USB Drivers I installed with the following driver pack I could located on earth:
Samsung CDMA Driver
Samsung Composite Drivers
Samsung USB Driver MCCI 4.34 WHQL
Samsung CDMA Modom 4.34
etc. etc.
Typically a shoot in the dark. Haha...
Now I will try to re-install them one by one to find out actually which one would be that particular driver that did at least recognize an "unknown device" (if I have luck... haha...) and make it a likely viable connection first.
There is another symptom that I didn't mention before, and it is that the phone cannot read the Micro SD card, not sure if it is me that I don't know how to explore the content on the card or it is the phone that it card-reading function is disabled as well (It is always strange when I explore the content in different folders and find out many system folders are empty... as I said before).
Let me spend some time on "wrestling" with the USB connection symptom first and the next is to see if I can make something out with your attached file.
Wish me luck.
Millions thanks again to you dermann. Will keep you posted of my status until I officially announce it a brick. Haha...
Have a nice day!
Hi Dermann,
Yet I cannot find the right USB Driver to install on my PC running XP, though the phone can read the MicroSD card now. Unfortunately after I copied all your files in the card (putting into a sub-folder), the phone can show only one file named USB, all the dll's files are now shown. And therefore I cannot really copy them into the Windows folder as you recommended. Do you know what would be the cause to this situation and how I can tackle this issue.
Anyway, it is a step closer. Thanks again and look for your generous advice.
Have a nice day.
ok, if you can install programs. try installing another file explorer like Resco Explorer, or one like it. if you use the the original explorer than the files will be hidden.
dermann said:
ok, if you can install programs. try installing another file explorer like Resco Explorer, or one like it. if you use the the original explorer than the files will be hidden.
Click to expand...
Click to collapse
OK!
I will find this program and try installing into my phone right after I get back home tonight. Got to go. Time to relieve myself from this headache... Haha...
Thanks again for your prompt reply. And will get back to you tomorrow and hopefully you still have patience to help someone who is not very smart and savvy with technical stuffs like me.
Have a nice day.
dermann said:
ok, if you can install programs. try installing another file explorer like Resco Explorer, or one like it. if you use the the original explorer than the files will be hidden.
Click to expand...
Click to collapse
Hi dermann,
I copied the unzipped folder to the root directory of my MicroSD card, run the "Explorer" and now it can display the content inside folders. However, the strange thing is:
I copied the unzipped files you gave me yesterday into the MicroSD card, when I use the new explorer to browse the files, still only the one named "USB" is shown and all the dlls files are hidden. I can see them only when I use the "Find" Command in the menu of Explorer (find *.*). By doing so they can be visible together with that USB file in the same folder. Unfortunately in the "Find" Menu I cannot find any command such as COPY or CUT so that I can copy them into the /Windows as you instructed.
So now I am kind of stuck at how to copy these files into the folder of \Windows.
Would love to get some kind advice from you.
Thanks a lot.
ok, sorry for the late response. just getting off a 14 hour work day. ok the file explorer... head to menu\options\general\browser, and uncheck everything. then head to the folder you have the files in and click action left soft key, and their is the copy, move, ect.. to move everything over at once click your star key "*" and check mark all the files, then copy or move them. you'll want to overwrite the files that are already their.
dermann said:
ok I have an idea... but I'm at work at the moment. when I get home I'll see if my idea does anything. I'll let you know.
edit!!! was just thinking. what os is your computer running? xp, vista, w7...
if your phone comes up as unknown device, that's better than nothing. here's what i'm going to do... i'll up load the usb drivers from my 607, and we'll see if that changes anything.
edit#2!!! ok here they are, along with the usb registry. put .dll's in windows folder on phone and import the .reg using a registry editor. soft reset after you do all that. let me know how things go.
Click to expand...
Click to collapse
Dear Dermann,
Thanks for your generous advice.
The EXPLORER works exactly the way you told me. Now I've succeeded into copying all the files (named USB and the other 5 dlls files) into my phone's /WINDOWS folder.
But I cannot quite understand the next step you wrote "... and import the .reg using a registry editor..." How can it be done or it has been done already by copying all the files into /WINDOWS folder?
Maybe you can advise the next step when you are free. Sorry to have bothered you with this. You needn't give me reply when you are busy with your work or enjoy your leisure time. Just write me when you are really free and don't have better things to do, I can wait very patiently.
Thanks again and you have a nice weekend.
sirs...
i hav d sem problem hir. Cant connect my device to d computer. Iv followed d suggestions like installing a file explorer jst so usb driver and d dll's b manually installed bt d prob is, it cannot even see my files! Damn! It seemed dat my case s even worse. There r no files n my folders. Will anyone help me please...
wthayd said:
Dear Dermann,
Thanks for your generous advice.
The EXPLORER works exactly the way you told me. Now I've succeeded into copying all the files (named USB and the other 5 dlls files) into my phone's /WINDOWS folder.
But I cannot quite understand the next step you wrote "... and import the .reg using a registry editor..." How can it be done or it has been done already by copying all the files into /WINDOWS folder?
Maybe you can advise the next step when you are free. Sorry to have bothered you with this. You needn't give me reply when you are busy with your work or enjoy your leisure time. Just write me when you are really free and don't have better things to do, I can wait very patiently.
Thanks again and you have a nice weekend.
Click to expand...
Click to collapse
send me the reg file, i'll make a .cab for you for an auto-install!
Thekn said:
send me the reg file, i'll make a .cab for you for an auto-install!
Click to expand...
Click to collapse
Thanks so much for your kindness.
Actually after my post Dermann was kind enough to help me by sending me a CAB file that would let me "import" the registry into the system of my phone. I guess it did import the registry successfully. Unfortunately, after copying all the dll files and importing that particular registry, it didn't change the overall picture - my phone still cannot be recognized when connecting via the USB port, just "Unknown Device" is shown.
It is still a deadlock to me.
Anyway, thanks for the offer and I appreciate it very much.
Thanks.
wthayd said:
Thanks so much for your kindness.
Actually after my post Dermann was kind enough to help me by sending me a CAB file that would let me "import" the registry into the system of my phone. I guess it did import the registry successfully. Unfortunately, after copying all the dll files and importing that particular registry, it didn't change the overall picture - my phone still cannot be recognized when connecting via the USB port, just "Unknown Device" is shown.
It is still a deadlock to me.
Anyway, thanks for the offer and I appreciate it very much.
Thanks.
Click to expand...
Click to collapse
i think the only option that's left is to go to a samsung service center! they have the hardware for it to restore your device to the original firmware!