Hi there,
I am writing to look for kind help from you guys on the i601 which was wrongly updated with a i608 ROM and was caused to possess no phone function at all, though it can be powered on to the home screen with some basic functions like file exploring. Now it has no phone function, and lots of other functions like power signal, user configuration menu, and etc. are not working either. The worst is it doesn't respond when I connect it with my PC via ActiveSync (seems the USB port is not funcitoning as well).
I'm not sure what kind of information should be given to let you guys better understand the symptoms but here is a few of information that might be a little bit insightful:
By keying in *#1546792*#:
Windows Mobile 6 Standard
CE OS 5.2.1620 (Build 18125.0.4.2)
Radio Version 0
RIL Version 2.002
... ...
By entering into Setting mode:
PDA Version
i608ZTGI2
Phone Version
(it is left blank )
Eboot Version
i608ZTGI2
I would love to see if you can shred me a light if and how I can fix it. All kind of help is highly appreciated.
Thanks a lot.
Did You try flash with wce downloader? Your phone is recognized by Windows in BootLoader mode? correct? then flash with i601 rom
PS: sorry i don't use english - is not my default language... but i try
thorn_pl said:
Did You try flash with wce downloader? Your phone is recognized by Windows in BootLoader mode? correct? then flash with i601 rom
PS: sorry i don't use english - is not my default language... but i try
Click to expand...
Click to collapse
Hi Thorn_pl,
I am always grateful and thankful to see a reply from someone who are trying to help others. Thanks a lot in advance for your kind advice.
To be exact, now the phone cannot be recognized by ActiveSync after plugging in through the USB port. I check through the files inside the phone and found that many sub-folders under Windows are empty, such as:
/My Device/ConnMgr
/My Device/Documents and Settings/default
/My Device/Documents and Settings/Samsung
/My Device/Program Files/Connections
/My Device/Windows/Activesync/ (only one file named CtrlLog)
/My Device/Windows/Systems/ (only some empty folders like CertDtls, ConfigMgr, DumpFiles, SQM, CabQueue)
Can someone be kind enough to teach me how to at least make it connectable with ActiveSync so that I can try flashing again a ROM to this phone?
Also if it can be done, I need to locate where i601 ROM would be available.
Thanks in advance!!!
hi
u are welcome
if u turn your smartphone in bl mode and connect to usb - is recognized? if is possitive then flash it
sorry but i go somewhere to drink becuase i have birthday today
greetz
thorn_pl said:
Did You try flash with wce downloader? Your phone is recognized by Windows in BootLoader mode? correct? then flash with i601 rom
PS: sorry i don't use english - is not my default language... but i try
Click to expand...
Click to collapse
Hi Thorn_pl,
Sorry for bothering you again, would you tell me what you mean by wce downloader? Is it a program that I can use in my case? Where can I find this program?
What is BootLoader mode?
Where can I download official i601 ROM? I tried to search on web but couldn't find any info about this strange version - i601.
Thanks again.
thorn_pl said:
hi
u are welcome
if u turn your smartphone in bl mode and connect to usb - is recognized? if is possitive then flash it
sorry but i go somewhere to drink becuase i have birthday today
greetz
Click to expand...
Click to collapse
Happy birthday to you!!! Have fun and a good time!!!
i believe the i601 is the same as the i607... try flashing a custom i607 rom.
dermann said:
i believe the i601 is the same as the i607... try flashing a custom i607 rom.
Click to expand...
Click to collapse
Hi dermann,
Thankyou for the reply.
The first headache to me is now my PC doesn't recognize the phone through the USB port. I have been looking around on the web and found some Samsung USB Driver files and had them installed in my PC. But it doesn't help at all, my phone cannot be recognized correctly (a few times it was recognized as Unknown Device). So when I power on my phone on BL mode and link it with WCEDownloader trying to flash, the START button is disabled.
I don't know if there can be solutions to make my PC recognize the phone again and am really frustrated at the moment. The only good thing is now I basically know how to flash a Samsung mobile phone and have collected bunches of ROMs and software.
See if someone know how to troubleshoot it.
Anyway, thanks a lot.
ok I have an idea... but I'm at work at the moment. when I get home I'll see if my idea does anything. I'll let you know.
edit!!! was just thinking. what os is your computer running? xp, vista, w7...
if your phone comes up as unknown device, that's better than nothing. here's what i'm going to do... i'll up load the usb drivers from my 607, and we'll see if that changes anything.
edit#2!!! ok here they are, along with the usb registry. put .dll's in windows folder on phone and import the .reg using a registry editor. soft reset after you do all that. let me know how things go.
dermann said:
ok I have an idea... but I'm at work at the moment. when I get home I'll see if my idea does anything. I'll let you know.
edit!!! was just thinking. what os is your computer running? xp, vista, w7...
if your phone comes up as unknown device, that's better than nothing. here's what i'm going to do... i'll up load the usb drivers from my 607, and we'll see if that changes anything.
edit#2!!! ok here they are, along with the usb registry. put .dll's in windows folder on phone and import the .reg using a registry editor. soft reset after you do all that. let me know how things go.
Click to expand...
Click to collapse
Hi dermann,
Thanks for the valuable advice.
My PC is running on XP.
Last night i just uninstalled all the SAMSUNG USB Drivers I installed with the following driver pack I could located on earth:
Samsung CDMA Driver
Samsung Composite Drivers
Samsung USB Driver MCCI 4.34 WHQL
Samsung CDMA Modom 4.34
etc. etc.
Typically a shoot in the dark. Haha...
Now I will try to re-install them one by one to find out actually which one would be that particular driver that did at least recognize an "unknown device" (if I have luck... haha...) and make it a likely viable connection first.
There is another symptom that I didn't mention before, and it is that the phone cannot read the Micro SD card, not sure if it is me that I don't know how to explore the content on the card or it is the phone that it card-reading function is disabled as well (It is always strange when I explore the content in different folders and find out many system folders are empty... as I said before).
Let me spend some time on "wrestling" with the USB connection symptom first and the next is to see if I can make something out with your attached file.
Wish me luck.
Millions thanks again to you dermann. Will keep you posted of my status until I officially announce it a brick. Haha...
Have a nice day!
Hi Dermann,
Yet I cannot find the right USB Driver to install on my PC running XP, though the phone can read the MicroSD card now. Unfortunately after I copied all your files in the card (putting into a sub-folder), the phone can show only one file named USB, all the dll's files are now shown. And therefore I cannot really copy them into the Windows folder as you recommended. Do you know what would be the cause to this situation and how I can tackle this issue.
Anyway, it is a step closer. Thanks again and look for your generous advice.
Have a nice day.
ok, if you can install programs. try installing another file explorer like Resco Explorer, or one like it. if you use the the original explorer than the files will be hidden.
dermann said:
ok, if you can install programs. try installing another file explorer like Resco Explorer, or one like it. if you use the the original explorer than the files will be hidden.
Click to expand...
Click to collapse
OK!
I will find this program and try installing into my phone right after I get back home tonight. Got to go. Time to relieve myself from this headache... Haha...
Thanks again for your prompt reply. And will get back to you tomorrow and hopefully you still have patience to help someone who is not very smart and savvy with technical stuffs like me.
Have a nice day.
dermann said:
ok, if you can install programs. try installing another file explorer like Resco Explorer, or one like it. if you use the the original explorer than the files will be hidden.
Click to expand...
Click to collapse
Hi dermann,
I copied the unzipped folder to the root directory of my MicroSD card, run the "Explorer" and now it can display the content inside folders. However, the strange thing is:
I copied the unzipped files you gave me yesterday into the MicroSD card, when I use the new explorer to browse the files, still only the one named "USB" is shown and all the dlls files are hidden. I can see them only when I use the "Find" Command in the menu of Explorer (find *.*). By doing so they can be visible together with that USB file in the same folder. Unfortunately in the "Find" Menu I cannot find any command such as COPY or CUT so that I can copy them into the /Windows as you instructed.
So now I am kind of stuck at how to copy these files into the folder of \Windows.
Would love to get some kind advice from you.
Thanks a lot.
ok, sorry for the late response. just getting off a 14 hour work day. ok the file explorer... head to menu\options\general\browser, and uncheck everything. then head to the folder you have the files in and click action left soft key, and their is the copy, move, ect.. to move everything over at once click your star key "*" and check mark all the files, then copy or move them. you'll want to overwrite the files that are already their.
dermann said:
ok I have an idea... but I'm at work at the moment. when I get home I'll see if my idea does anything. I'll let you know.
edit!!! was just thinking. what os is your computer running? xp, vista, w7...
if your phone comes up as unknown device, that's better than nothing. here's what i'm going to do... i'll up load the usb drivers from my 607, and we'll see if that changes anything.
edit#2!!! ok here they are, along with the usb registry. put .dll's in windows folder on phone and import the .reg using a registry editor. soft reset after you do all that. let me know how things go.
Click to expand...
Click to collapse
Dear Dermann,
Thanks for your generous advice.
The EXPLORER works exactly the way you told me. Now I've succeeded into copying all the files (named USB and the other 5 dlls files) into my phone's /WINDOWS folder.
But I cannot quite understand the next step you wrote "... and import the .reg using a registry editor..." How can it be done or it has been done already by copying all the files into /WINDOWS folder?
Maybe you can advise the next step when you are free. Sorry to have bothered you with this. You needn't give me reply when you are busy with your work or enjoy your leisure time. Just write me when you are really free and don't have better things to do, I can wait very patiently.
Thanks again and you have a nice weekend.
sirs...
i hav d sem problem hir. Cant connect my device to d computer. Iv followed d suggestions like installing a file explorer jst so usb driver and d dll's b manually installed bt d prob is, it cannot even see my files! Damn! It seemed dat my case s even worse. There r no files n my folders. Will anyone help me please...
wthayd said:
Dear Dermann,
Thanks for your generous advice.
The EXPLORER works exactly the way you told me. Now I've succeeded into copying all the files (named USB and the other 5 dlls files) into my phone's /WINDOWS folder.
But I cannot quite understand the next step you wrote "... and import the .reg using a registry editor..." How can it be done or it has been done already by copying all the files into /WINDOWS folder?
Maybe you can advise the next step when you are free. Sorry to have bothered you with this. You needn't give me reply when you are busy with your work or enjoy your leisure time. Just write me when you are really free and don't have better things to do, I can wait very patiently.
Thanks again and you have a nice weekend.
Click to expand...
Click to collapse
send me the reg file, i'll make a .cab for you for an auto-install!
Thekn said:
send me the reg file, i'll make a .cab for you for an auto-install!
Click to expand...
Click to collapse
Thanks so much for your kindness.
Actually after my post Dermann was kind enough to help me by sending me a CAB file that would let me "import" the registry into the system of my phone. I guess it did import the registry successfully. Unfortunately, after copying all the dll files and importing that particular registry, it didn't change the overall picture - my phone still cannot be recognized when connecting via the USB port, just "Unknown Device" is shown.
It is still a deadlock to me.
Anyway, thanks for the offer and I appreciate it very much.
Thanks.
wthayd said:
Thanks so much for your kindness.
Actually after my post Dermann was kind enough to help me by sending me a CAB file that would let me "import" the registry into the system of my phone. I guess it did import the registry successfully. Unfortunately, after copying all the dll files and importing that particular registry, it didn't change the overall picture - my phone still cannot be recognized when connecting via the USB port, just "Unknown Device" is shown.
It is still a deadlock to me.
Anyway, thanks for the offer and I appreciate it very much.
Thanks.
Click to expand...
Click to collapse
i think the only option that's left is to go to a samsung service center! they have the hardware for it to restore your device to the original firmware!
Related
hi there,
As you will guess by my question and post count i am a fully fledged n00b and have just bought the o2 xda orbit.
It such a great forum and enjoying reading all these mod's however there is one slight problem...
...how do you add them all?! i can obviously download all the files etc to my desktop (PC) but how do i then get them to install and work on my xda? e.g. quickgps mod, emulators, themes etc?
i imagine its very easy to answer and thanks in advance
just sync ur pda to pc,some progs will require a simple click ,if this needs you to do more on the device it will prompt you
other will need transfering onto your memory card and activating from your pda
i used this method with trail and error
good luck buddy
yeah ive tried syncing it and it does connect but then unsure of where to put the files.
For example i have the file to update the quickgps to locate quicker. Its in a .arm file and inside that is one file which is quick~g.000. I dont know whether to put the .arm or .000 onto the xda and when i have found that out in which folder do it put it when on explore of the XDA through activesync?
Thanks for the reply.
massive help and all understood now. tried both cab and exe files and both work great, thanks alot
Chris
i know this is probably a stupid question, but i cannot get cab files onto my pocket pc. i have read and it says that all i should have to do is copy it from my comp. and paste it in a folder in my phone. do i have to have a sd card to do this, becuase while using active sync it will not let me do it at all. i am very very new to this stuff so please no bashing and any help would be great.
in activesync click "explore" and find where you want to drop the files then drag it over or copy and paste it.
thanks joel i have tried that and when i drag it over it shows as an circle with an line through and it will not let me put it in there maybe i am not extracting it properly or something i dont know.
there is nothing to extract, its drag and drop. Try copy and pasting. (also, make sure the device is still connected)
first of all, tell us which device do you have and which windows are you runnig on it?
second of all, tell us the enviroment of your computer, that is the Operating system (vista, xp or linux?)
the overall process should really be easy, copy the cab, click explore and click the "my documents" folder, right click and selct Paste, thats it...browse the location you pasted the CAB File from your pocket Pc and install it
Here is a more detailed instruction on how to install a CAB :
http://www.pocketpccentral.net/help/tutorials/install_cab_file.htm
i have a xv6600 running wm2003, and my computer is running windows xp
Cab via ActiveSync Software
Hi
You could try this:
http://www.modaco.com/content/windo.../cabviaactivesync-free-edition-now-available/
Cheers
andrew-in-woking
i got it thanks for all of your help guys
post deleted
Ok. I accidentally deleted a really good picture that I took off of my phone before I dumped my pictures on my hd, but it is still showing as my today screen background image. Where the hell is it on my phone? It's not here: WINDOWS\stBackImage.png, as on older versions.... please help.
http://www.htcwiki.com/thread/2296698/Where+is+the+Today+screen+background+picture+stored??t=anon
doesnt help
ok i have been searching all over for an answer for you and here is what i found at least on my phone. I installed mun background changer today so i dont know if you have that as well but you can try and see if things are the same. Using total commander go to windows directory then HomeBackground.img try that see if you have that file. If you do copy it and save it on your computer than access it because i cant access it from the phone. Here is what i did copied the file from the windows directory into my memory card using the phone then accessed the memory card from my computer renamed the file to .jpg because my computer could not open .img and it worked.
EDIT: yup that is it. I went ahead and installed mun background changer and everything softreseted uploaded a picture as my wall paper so i can recreate the same scenario you have and the file is located:
Windows/HomeBackground.img
ill try this and see if it works... thanks for your help
Tada.... it worked...
The file is right in the Windows directory.
Thanks so much.
You are the man, or woman, whichever.
Hello, my name is George, and i am from Greece.
HTC Touch Diamond 2 is my first Windows Mobile ( i just get it from expansys), so i have a "stupid" question to make. How we can put applications, software, etc.? Please expain what we have to do, step by step. I thing that a lot of new users have the some questions ( and yes, i am 28 years old and i am using PC for over 14 years).
I have already download the first 10 steps that you suggest in forum. Now?
Give me, if you can, an example of one program. As " we find the program, we download it, exctract...".
Thank you, i am sorry if i tired you, and i am looking forward listen from you.
Sorry again if my question looks stupid. I just want to make any mistake. Thank you!
i meen "i just looking avoid making any mistake". Phone rocks!
themes
I installed a theme and it overwritten the defaul theme of the phone (htc black). is there any way to restore the default? Thanks in advance
aktinologos said:
i meen "i just looking avoid making any mistake". Phone rocks!
Click to expand...
Click to collapse
First of all get a backup program like Sprite Backup, see some help in this thread.
This helps you to get back to the last working level while trying themes, applications and software.
For themes, check this thread, it helps to customize your theme by yourself.
For applications and software, they either come as a Windows .exe file or as a .cab file.
For the .exe files, you start them on your PC and the software/application is installed on your phone through ActiveSync.
For the .cab files, you have to copy them to your phone (prefered to the storage card) and then start them there with the file explorer. The software/application will be installed then.
Hope this helps a little bit.
georgeono said:
I installed a theme and it overwritten the defaul theme of the phone (htc black). is there any way to restore the default? Thanks in advance
Click to expand...
Click to collapse
If it was just a theme, you should be able to go the Setting / Today and select HTC Black.
BeeGee_Tokyo said:
For applications and software, they either come as a Windows .exe file or as a .cab file.
For the .cab files, you have to copy them to your phone (prefered to the storage card) and then start them there with the file explorer. The software/application will be installed then.
Hope this helps a little bit.
Click to expand...
Click to collapse
I have installed to storage card,
When I install it asks where I want to install it to device or storage card I presume I pick device,
Dose it automaticly install to the right folder, or do you have to direct it to the right folder ??
cheers
avtomaticy chooses folder //storage card/program files/"name of the program"
because diamond2 has lots of space, I choose for all must have programs* to install on the device, instead of choosing the memory card
*camera mod upgrade, advanced config. tool ...... stuff U don't want to lose if U replace memory card with another
Ok, new to all this. I have a Sprint HTC Touch Pro 2 CDMA. I flashed to an Energy Rom, looks great. Now... How do I load other software... games and such? I have looked around here, thinking it would be part of the first post, I was wrong. Perhaps this site is too advanced for that? If so, point me to a newbee site and off I shall ride. Thanks in advance for your help. This phone is awesome, and the Energy rom I loaded, looks sweet.
Johnhcfllc said:
Ok, new to all this. I have a Sprint HTC Touch Pro 2 CDMA. I flashed to an Energy Rom, looks great. Now... How do I load other software... games and such? I have looked around here, thinking it would be part of the first post, I was wrong. Perhaps this site is too advanced for that? If so, point me to a newbee site and off I shall ride. Thanks in advance for your help. This phone is awesome, and the Energy rom I loaded, looks sweet.
Click to expand...
Click to collapse
well. there is the microsoft marketplace. or .cab files.
.cab file instructions...
one. download application's .cab file. suggested list of applications can be found here.
two. move the .cab onto your phone's storage card.
three. on your phone, navigate to the .cab file with file explorer, or other like program.
four. open .cab file.
five. choose installation location. device or storage card.
six. select install.
seven. enjoy.
and i havent ever used marketplace before...
i always find the .cab file.
sh4d0w86.
Not to make fun, but it is pretty surprising the you are able to unlock the phone and reflash the OS, but can't install software.
If you search this site, Microsoft Marketplace, or just do a Google for "Windows Mobile freeware", you'll find many thousands of apps. Find the app you want, copy or download the .CAB file to the TP2, and execute it.
For example, Google "Google Mobile Maps", download the Windows Mobile .CAB file, and run it.
Thanks
Well, the instructions to flash a phone are detailed and many. One problem I had was I was dropping the 7zip file onto the phone. Also, I could not unzip the file with the extension of 7z because I did not have the correct unzip manager. Another issue was I was trying to Sync the programs to the phone. Thanks for clearing it up. Is there a logical place to put them on the phone to make them run fast? Thanks in advance.
Johnhcfllc said:
Well, the instructions to flash a phone are detailed and many. One problem I had was I was dropping the 7zip file onto the phone. Also, I could not unzip the file with the extension of 7z because I did not have the correct unzip manager. Another issue was I was trying to Sync the programs to the phone. Thanks for clearing it up. Is there a logical place to put them on the phone to make them run fast? Thanks in advance.
Click to expand...
Click to collapse
Installing to main (internal) memory is much faster than installing to the SD (external) memory. Installing large programs to the SD card is the general rule of thumb for obvious reasons. It's up to you where you prefer to install them.
If you mean where should you put the actual *.cab files, then you could always delete them once they've been installed. You don't need them again unless you're going to flash constantly. It's always good to back them up, so storing them on your PC or the SD card would be preferable.
Thanks a bunch!
well, check out this thread..........
cabs just load on the phone and run like any program, just find the file and click it. exe's need to run from windows (regular computer) and install through activesync.
http://forum.xda-developers.com/showthread.php?t=550973
Excellent Thread!!!!!!!! I too made all those mistake and diddn't know how to load .cab files. This is my first foray into modding phones so this thread was quite informative.