Database Info

[Hack] FULLY disable automatic screen rotation

I've come to notice that no one REALLY knew how to fully disable screen rotation on WM devices.
Some offered 3rd party apps to get the job done, some only knew how to disable automatic rotation, but when the device went into standby and woke up again - the screen rotated back. So that didnt really work.
So if you're as desperate as i was about screen rotation,
this is what you need to do:
1. Get dotfred's free taskmanager HERE, and run it.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll)
3. Long-Tap on it, and tap on "Stop"
4. Long-Tap on it again, and now choose "Set Manual"
EDIT: This should be enough. try flipping your screen/sliding your keyboard and see if the screen changes orientation.
Now put your device on standby, and turn it on again. If orientation stays the same - you're done. If not - try steps 5-7, although they seem to be irrelevant.
5. Go to "Notifications" tab, and look for "Notifications\NamedEvents\VCPowerWakeupEvent"
6. Tap on it to make it selected
7. Disable it
(In dotfred's taskmanager, there should be a button for disabling it, but for some reason some devices couldn't see the button icons, although the buttons are still clickable. Under the notifications list there is an empty light-blue line - the buttons are there, eventough you can't see them.
The disable buttons is somewhere i the middle of that light-blue line, just tap the center until a message box popps up and asks if you'd like to disable this notification - Tap on yes.)​All those steps are a one time deal - they stick even after an SR.
This has been tested on htc universal and works great.
The screen will keep its orientation even if you flip your screen, take out your built in keyboard, or turn the device off and back on.
The only time your screen will revert back to the original orientation is when you soft reset your device.
Hope this helps

So now, if you need something to help you rotate your screen on demand, you could use this small app that i've made.
its called ScreenRotate.exe (naturally), and you use it like this:
usage: ScreenRotate.exe <command line argument>
0 : Rotete to angle 0
90 : Rotete to angle 90
180 : Rotete to angle 180
270 : Rotete to angle 270
CW : Rotate clockwise
CCW : Rotate counter-clockwise
MIRROR : Mirror the current angle
If nothing will be specified at command line, nothing will happen.
.NET CF 2 is needed.​
I really recommend using it along with FTouchFlo.
This way, to rotate the screen manually, you just need to drag your finger the way you want the screen to be shown, from top to bottom.
I find it quite comfortable while driving...
Those are the changes you'd need to change in FTouchFlo to make it work with ScreenRotate:
DownUpApp:\Program Files\FTouchFlo\ScreenRotate.exe
DownUpAppCmdLine:mirror
LeftRightApp:\Program Files\FTouchFlo\ScreenRotate.exe
LeftRightAppCmdLine:cw
RightLeftApp:\Program Files\FTouchFlo\ScreenRotate.exe
RightLeftAppCmdLine:ccw​

Thank you so much... I have been looking for this for sooo long.
This is the perfec way to make it stick in either Portrait / Landscape.
There have been many users such as myself who have wanted our devices to stay in landscape and this is the perfect hack.
Thanks again... Cheers
BTW -> Tested and works on my Hermes
Just added it to the Hermes Wiki (Can be found under regisrty tweaks although it's not a reg tweak)

happy to hear that!
you're welcome mate.

I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again

zalaros said:
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
Click to expand...
Click to collapse
actually, you're right.
i guess the notification has nothing to do with it,
i don't remember what made me think it does.
i'll edit the hack accordingly.
thanx zalaros

Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?

Ok i found a way to reload this specific device (mis1).
1. Run taskmanager.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll) (it is unloaded if you have done everything described on the 1st post)
3. Long-Tap on it, and choose "Set Manual"
4. Long-Tap on it again, and choose "Set Automatic"
5. Soft reset your device

zalaros said:
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Click to expand...
Click to collapse
I have the same syncing problem

Doesn't seem to work on my Tilt/Kaiser-Dutty 6.0..
Any other ideas?

redlynr said:
I have the same syncing problem
Click to expand...
Click to collapse
Just solved!
The ActiveSync troubleshooter (menu: Help/Troubleshooter for ActiveSync) offered to clear the "Enable advanced network functionality" check box. While trying to do that, an error message "Failed to disable RNDIS ..." was popping up every time. As per this suggestion, I removed virtual COM ports from Bluetooth settings and then it was possible to clear that check box.
Immediately thereafter ActiveSync woke up on the PC and offered to create a new partnership (because I deleted everything in frustration earlier). No problems for half a hour.
Then I left the administrator account and logged on as the usual limited user. ActiveSync again was unable to connect until the advanced functionality check box was restored. Does it seem that those both accounts will require different settings? Dunno, I haven't checked yet.

On my Wizard, with the TNT Rom (August 08), I don't see the device MIS1, and I don't see the event in the TaskManager.
Any ideas how to disable screen rotation, when I slide the keyboard?
Thanks in advance

Sprint HTC Touch Pro ROM 1.03.651.4
The MIS1 solution did not work for my phone (Sprint HTC Touch Pro ROM 1.03.651.4), but I found that this does:'
HKLM\System\GDI\Rotation\CamAppActive = 1
Presumably the device thinks the camera is active and thus doesn't rotate the display.
Obviously this will return to 0 after soft reset, so I used TaskMgr 2.9 to export the entry, then added a startup shortcut to import this entry with the /silent flag.
UPDATE: This fix interferes with data entry in Opera. When I try to type into a google search box, I get one character, the box looses focus, and I gotta tap on it again to type any more. Severely annoying. Goes back to normal when I change CamAppActive back to 0, and close and reopen the keyboard. I may make an exe to toggle or just make two reg import shortcuts.

Way cool!
Works for me too on a Kaiser, with old Dutty ROM.
How in the world did you figure it out? Look at that key?
Thanks, Jeff

It made perfect sense, but admittedly I tried changing everything under "Rotation" before I tried that one.
Item #21 on this list clued me into that area of the registry:
http://forum.xda-developers.com/showthread.php?t=398265

El Zilcho.
Bupkis. I've been knocking my brains out trying to disable autorotation, but still have manual enabled. (I've got some apps that play nice only in landscape, and some only like portrait. Also, I'd like to be able to slide my keyboard out really quick-like to enter some quick text, then slide it back w/o messing with screen orientation.) I tried the MIS1 disable, but no-go for me. Also tried messing with the Rotation entries, specifically the SlideKey key, but apparently that value is volatile and changes with each slide. Oh well! Unless there's a way to lock the SlideKey value so it can't be changed, that'd fix my issue. Hmm.
EDIT: Forgot to mention. I've got the Tilt (8900 I guess?) with vanilla OEM 6.1 ROM, modded only for no-bloat. (Did the old battery trick after reset/reinstall to prevent bloatware.)
EDIT: After I typed this up, figured I'd try using Settings>Screen (or somesuch) to just fix perspective. Still auto-rotates. KaiserTweak and Advanced Config can't get it to stick on one or the either, either. Editing registry turns up same results. Settings right now say it's fixed at 0 degrees but it still autorotates.
Late-breaking edit, 14-JUN-10: Got rid of it a few months ago anyways, moved to a Rhodium. No D-pad, so no more worries about those games that didn't like rotation, as they needed the D-pad to work anyways, and the TP2 doesn't have one.

Doesn't work on touch pro 2
http://forum.xda-developers.com/showthread.php?p=5928161#post5928161
That's what I resorted to!

Wow
Wow, pretty hard core fix! On the Sprint Touch Pro 2 Stock 6.1 my reg entry above only works to prevent rotation when the keyboard is slid out, it will not help with the autorotation provided by the sensor. I however put together some .reg files, with my perceived essential fixes including disabling sensor rotation:
http://forum.xda-developers.com/showthread.php?t=651166

So, following post 'step by step' didn't change anything with my screen rotation settings. still automatically rotates all the time when I don't want it too...really frustrating. This is about the 4th hack I've tried with no success. Does anyone know what the proper solution is for the HTC Rhodium? I'm running stock AT&T Tilt 2 Rom WM 6.5.
I know there are programs you can install to take over rotation control...I'm just looking for a reg change or service hack or something to stop auto rotate from ever happening.
Thanks to anyone who knows the answer!!

Problem with Large Start menu on non HTC devices

hi there!
I downloaded JUVS HTC Large Titlebar and HTC Enlarge Start menu CABs and installed both on my E-TEN M800 (VGA).
They installed fine and I now have the "large start menu" item in my system settings.
But when I check the checkbox to turn it on, it still doesnt enlarge.
I rebooted the device and still nothing. I basically only need the zooming of the notification icons in the start-bar.
have I missed something? do i need additional files?
thanks
Bernhard

the old one just for QVGA, try this one, but dun know can it work on ETEN

thanks, but it doesn't work.
maybe it needs touchFLO so its only activated when you use the finger? or something like that?

No touchflow wouldnt make a difference on this. Unfortunatly some of the items on here will only work with HTC devices and i think this may well be one of them im afraid. Unless anyone else can shed any light

Tried the Large Start Menu once on my iPAQ, and what I found was that the service (htcStartMenuService.dll) doesn't automatically start. Using DotFred's Taskmanager to manually start the service made the large start menu appear... until the next soft reset.
The same thing probably happens with the large titlebar thing.

thanks ridolfo, this works!
now i have to find a way to start it automatically on reboot
makes my e-ten even more userfriendly!
edit: i just added this nice and useful taskmanager to my StartMenu and on reboot, i open it, go to the services tab and click the little start icon for the LargeTitleBar service. thats it.
works like a charm.

IIRC, you can even open it on the services tab, using a command-line switch. Have a look in the "About" screen for possible command-line switches (I think it's in the "About" screen, but I'm not sure).
I'm still hoping that someone can explain why some of the HTC services do auto-start, but others don't.

yes, because when you install the LargeTitleBar it correctly creates its entry in the Registry and is bound to be started, but somehow it doesnt.

In my brand new HTC Touch Cruise, large menu option is ticked, but after playing around with apps or settings it becomes small, allthough it's still ticked. I have to disable and reenable it to make it big again. It's a bit of a problem, as it happens often. Advice would be appreciated.

same problem
couldn't this problem be fixed by some registry entires ?
I mean to put an application into autostart shouldn't be a problem, well for me, as a hardcore newp it is acutally, but maybe not fo you guys
on my xperia x1 i've got the same problem .

large start menu
bommel0815 said:
...
now i have to find a way to start it automatically on reboot
...
Click to expand...
Click to collapse
Hi! at all!
Have you found a solution?

Black screen where TF3D should be at startup..

I'm not sure what happened, but I've been noticing that now when I boot up my VZW TP2, the launching touchflo 3d screen pops up, then goes away and there is nothing but a black background and the windows taskbar.
The black screen looks like a program with an all black background and no text/content, it has an X in the upper right hand corner and I can click that X to reveal TF3D.. I can also click anywhere on the screen and/or END key and reveal TF3D.
This happens at startup every time now.
Things I've done since I noticed the problem;
Installed HDBoobs
Installed Diamond Halogram w/ ATi Graphics Driver
Put HTCAPI.dll in the \windows\ directory
Installed .NET CF 3.5
Installed Schap's Registry Editor
Installed J.S. Advanced Configuration Tool 3.3
Installed Ilium Software Screen Capture
Installed Windows Live (newest version)
Installed Microsoft Facebook Application
Did '7MP Panorama' Tweak
Did 'Reveal 5 Hidden Camera Settings' Tweak
Things I've done after noticing the problem;
Installed Microsoft ICS
Installed Garmin MobileXT
Did 'Close Opera with X instead of minimize' registry mod
Did 'ResProxy ShareMemSize=0' registry mod
Installed NoPushInternet
EDIT 1:
I've now removed;
'ResProxy ShareMemSize=0' registry mod (slowed me down too much)
HDBoobs
Diamond Halogram w/ ATi Graphics Driver
Nothing has changed.
EDIT 2:
I had it setup to be password protected. After removing the password option and soft-resetting, the problem is gone. Is this a bug? Is there a fix for this? I know it seems minuscule, but this isn't how it should work and I want to fix it
I'd like to avoid doing a hard reset if possible.. so any advice, other than 'ignore it' would be appreciated.

I think that I have the same thing happening. I don't think that it was like this out of the box, but I'm not sure when it started. Basically, my phone loads showing the taskbar at the top and the two soft keys at the bottom. Everything in between is black. If I touch the screen, then the TouchFlo stuff shows up. After that, it's fine.
I do have a lock code enabled. It was forced by an Exchange Server policy. Not sure if this "issue" arose at that point or not.

I asked the same question here... http://forum.xda-developers.com/showthread.php?t=560636
Seems to be related to having the PIN lock enabled. I too am required to use this for work reasons, and have not found a way to get TF3D to display on boot up without having to touch the screen.

SecretAgentMan said:
I think that I have the same thing happening. I don't think that it was like this out of the box, but I'm not sure when it started. Basically, my phone loads showing the taskbar at the top and the two soft keys at the bottom. Everything in between is black. If I touch the screen, then the TouchFlo stuff shows up. After that, it's fine.
I do have a lock code enabled. It was forced by an Exchange Server policy. Not sure if this "issue" arose at that point or not.
Click to expand...
Click to collapse
This is exactly what is happening to mine..
Sublimedelta9 said:
I asked the same question here... http://forum.xda-developers.com/showthread.php?t=560636
Seems to be related to having the PIN lock enabled. I too am required to use this for work reasons, and have not found a way to get TF3D to display on boot up without having to touch the screen.
Click to expand...
Click to collapse
At least we're not alone.. now it's a known issue, hopefully someone will look further into it (since I don't know how to fix it)
-mak

Here too
First I installed XDA shutdown to perform soft resets. Then the memmaid demo to further my efforts to be clean & mean. Just installed s-k-tools to my HTC Sprint Touch Pro 2 (because memmaid demo misreported my memory!)and after running clean I'm getting cprog.exe & sktools.exe errors and now "bluetooth stack failed to load" -my friggin bluetooth wont load. Only other non stock thing is Duttys disable push internet. Did I make a mistake in purchasing this tweakware? Can I rectify these situations without a hard reset? Somewhere along the way the black screen thing occurred too.

Grindscorelink said:
First I installed XDA shutdown to perform soft resets. Then the memmaid demo to further my efforts to be clean & mean. Just installed s-k-tools to my HTC Sprint Touch Pro 2 (because memmaid demo misreported my memory!)and after running clean I'm getting cprog.exe & sktools.exe errors and now "bluetooth stack failed to load" -my friggin bluetooth wont load. Only other non stock thing is Duttys disable push internet. Did I make a mistake in purchasing this tweakware? Can I rectify these situations without a hard reset? Somewhere along the way the black screen thing occurred too.
Click to expand...
Click to collapse
Do you have a password-required device lock setup? If so, and you're getting the black-screen issue just after you unlock your phone when you first boot it up (from an off state), then you're probably in the same boat as us..
-mak

Same issue here.... yes I have a PIN lock code.

brent372 said:
Same issue here.... yes I have a PIN lock code.
Click to expand...
Click to collapse
interesting. I don't have the code, and I've never seen this. Then again other software installed might make a difference.
WTF is HDBoobs?

LOL... I had the same question.

Believe it or not . . .
http://www.freewarepocketpc.net/ppc-download-hdboobs.html

Any Way to stay in keypad mode during call?

My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.

I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.

yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.

Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!

I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.

AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?

MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.

If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!

MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!

I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!

I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?

AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.

OFFICIAL Verizon MR2 ROM Problem / Fix Thread

First - MODs, can we please sticky this thread.
Second - This thread is for others, like me, that are using the stock VZW MR2 ROM and would like to have one place to look for all fixes to all the little issues with it.
The official problem list will be listed in Posts 2 - 5.
Discussions are welcome of course. If I have missed an issue, please bring it up. Likewise if you know of a confirmed solution, please post about it and I will update Posts 2 - 5 as necessary.
This is NOT for anybody using a custom ROM (including Mr.X's fixed ROM)
Please take discussions about issues with those ROMs to the appropriate thread.
Remember, this is for actual fixes.. not statements like CHT fixes this ot Mr.X's ROM fixes that, etc..

Problem: Task Manager missing from upper right of screen
Resoltion: Install TouchX Task Manager (attached below)
Problem: MMS not downloading automatically
Resolution: Install razorloves MMS Fix (attached below) or manually edit registry: HKLM -> Software -> Arcsoft -> Arcsoft MMS UA -> Config -> UI -> PromptForActiveConnection -> Change value to 0
Problem: My Location Weather not updating
Resolution: not listed
Problem: Custom WinMo 6.5 Taskbar missing icons
Sound icon missing completely
Custom 3G icon reverts to stock
Custom battery icons revert to stock
Custom missed call icon reverts to stock
Resolution: not listed
Problem: Screen of Death ("Backlight is off. Press button to turn on")
Resolution: not listed
Problem: Memory Leak (phone slows down and shows high memory usage after a while, yet nothing is running in task manager)
Resolution: not listed

Reserved (2)

Reserved (3)

Reserved (4)

Have to dial twice?
Is anybody else having this problem? I upgraded to VzW MR2. Now after I dial a number and hit send, the number just disappears and the call doesn't connect. It usually works on the second try, though. Same thing on the first press of a contact or a speed dial - nothing - but a second press works.
It is not a sensitivity issue. The device is registering my press, just nothing happens (or in the case of dialing a number, it erases).
I tried uninstalling things, then hard-reset. It appeared to work better for a while, but then started acting up again.
Any help?

Bully Dawg said:
Is anybody else having this problem? I upgraded to VzW MR2. Now after I dial a number and hit send, the number just disappears and the call doesn't connect. It usually works on the second try, though. Same thing on the first press of a contact or a speed dial - nothing - but a second press works.
It is not a sensitivity issue. The device is registering my press, just nothing happens (or in the case of dialing a number, it erases).
I tried uninstalling things, then hard-reset. It appeared to work better for a while, but then started acting up again.
Any help?
Click to expand...
Click to collapse
I saw your post on PPCG about this, but I have not experienced this issue.

brent372 said:
I saw your post on PPCG about this, but I have not experienced this issue.
Click to expand...
Click to collapse
DISREGARD -- this is apparently not an MR2 bug, but rather a result of incompatibility of chevy's vzw fix to saumaun's caller's city/state on dialer.

Bully Dawg said:
could it be a registry setting -- maybe in the phone canvas settings? it only occurs in dialing and nothing else. i don't have any dialer mods (except saumaun's area code on dialer + chevy's vzw fix).
Click to expand...
Click to collapse
I am not familar with either of those, so I can't really say...

brent372 said:
Problem:
Problem: MMS not downloading automatically
Resolution: Edit registry: HKLM -> Software -> Arcsoft -> Arcsoft MMS UA -> Config -> UI -> PromptForActiveConnection -> Change value to 0
Thanks so much!
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Problem: MMS not downloading automatically
Resolution: Edit registry: HKLM -> Software -> Arcsoft -> Arcsoft MMS UA -> Config -> UI -> PromptForActiveConnection -> Change value to 0
Yes Thank You. Been looking for this since I updated.

Problem with Arizona Time Zone after MR2 upgrade
Since upgrading to MR2 my phone changes from Arizona to Mountain time zone every time it reboots and connects to a cell tower (time zone remains on Arizona if I reboot in "Airplane" mode). Time zone also changes at some times when I drive betwen cities (or cell towers??). Arizona is an 'offical' time zone. I applied the Microsoft DST update to no avail. I have verified that the weather update registry values match another post also. Any help would be appreciated! Verizon support claims its an HTC/Microsoft problem and will not address it.

Problem: Google Maps no longer integrated with Contacts
Before applying hte MR2 update you could show directions to an address in your contacts with just one click. Google Maps is no longer included in the MR2 update, and even after I installed it thre is no link to show google map directions to an address viewed in the contacts/People listing. Is ther a cab to restore that functionality?

menmym3 said:
Since upgrading to MR2 my phone changes from Arizona to Mountain time zone every time it reboots and connects to a cell tower (time zone remains on Arizona if I reboot in "Airplane" mode). Time zone also changes at some times when I drive betwen cities (or cell towers??). Arizona is an 'offical' time zone. I applied the Microsoft DST update to no avail. I have verified that the weather update registry values match another post also. Any help would be appreciated! Verizon support claims its an HTC/Microsoft problem and will not address it.
Click to expand...
Click to collapse
Check in SETTINGS > DATA SERVICES -> INTERNET TIME SYNC and make sure GET TIME FROM INTERNET is checked.
That is all I can think of.

menmym3 said:
Before applying hte MR2 update you could show directions to an address in your contacts with just one click. Google Maps is no longer included in the MR2 update, and even after I installed it thre is no link to show google map directions to an address viewed in the contacts/People listing. Is ther a cab to restore that functionality?
Click to expand...
Click to collapse
Not that I am aware of

I can't say that this is an MR2 problem but here goes anyway. I keep my phone in a horizontal holder on my belt. When a call comes in it starts to ring. I pull it out of the holster and turn it to portrait. While I turning it switched to a landscape screen and then eventually back to the portrait screen. It's slow so by the time it's done I miss my call sometimes. I have read things about going in to the G-Sensor settings and switching off auto-rotate but I don't have a G-Sensor settings under the HTC menu. I can't believe I am the only one running in to this but yet I have searched and searched and found nothing similar. I know it can be turned off because when I tried a custom ROM it was off but unfortunately, any custom ROM I've tried, and I've tried a lot, always left me with problems that I couldn't live with. Great that they work from some but just not for me.

tboneppc said:
I can't say that this is an MR2 problem but here goes anyway. I keep my phone in a horizontal holder on my belt. When a call comes in it starts to ring. I pull it out of the holster and turn it to portrait. While I turning it switched to a landscape screen and then eventually back to the portrait screen. It's slow so by the time it's done I miss my call sometimes. I have read things about going in to the G-Sensor settings and switching off auto-rotate but I don't have a G-Sensor settings under the HTC menu. I can't believe I am the only one running in to this but yet I have searched and searched and found nothing similar. I know it can be turned off because when I tried a custom ROM it was off but unfortunately, any custom ROM I've tried, and I've tried a lot, always left me with problems that I couldn't live with. Great that they work from some but just not for me.
Click to expand...
Click to collapse
I have not experienced that, but I use a vertical holster.

I got a comment elsewhere that said it's the magnetic case and that I need to get a velcro one. So, I ordered the velcro one and will see how it works out. I could swear with the custom ROM it didn't do this but if the case magnet is causing it to think the keyboard is being opened then it makes all the sense in the world.

tboneppc said:
I got a comment elsewhere that said it's the magnetic case and that I need to get a velcro one. So, I ordered the velcro one and will see how it works out. I could swear with the custom ROM it didn't do this but if the case magnet is causing it to think the keyboard is being opened then it makes all the sense in the world.
Click to expand...
Click to collapse
I have seen the magentic case causing the screen to shut off and on as the device is removed / inserted.

tboneppc said:
I can't say that this is an MR2 problem but here goes anyway. I keep my phone in a horizontal holder on my belt. When a call comes in it starts to ring. I pull it out of the holster and turn it to portrait. While I turning it switched to a landscape screen and then eventually back to the portrait screen. It's slow so by the time it's done I miss my call sometimes. I have read things about going in to the G-Sensor settings and switching off auto-rotate but I don't have a G-Sensor settings under the HTC menu. I can't believe I am the only one running in to this but yet I have searched and searched and found nothing similar. I know it can be turned off because when I tried a custom ROM it was off but unfortunately, any custom ROM I've tried, and I've tried a lot, always left me with problems that I couldn't live with. Great that they work from some but just not for me.
Click to expand...
Click to collapse
I have the same problem, and I know I don't have a magnet in my holster.