Hi guys,
When i run the upgrade utility program either for wm2005 or the upgrade off o2 website im getting an "error 100 :model id error" i have noticed that once my device goes into usb mode the activesync disconnects, i have checked all settings in activesync and they seem ok, i have no problems with sending and recieving information other than when i run the upgrade utility program.
The instructions that came with helmis rom upgrade say to put the file extrom on mem card, but the instructions in wiki dont mention this which leaves me totaly confused on the matter,
I have been reading wiki for a solid week now so have done plenty of research.
Any help appreciated guys.
Thanks
Alan
model id error sounds like a rom for a different device (?)
active sync will disconnect, ruu has to be able to work without it, for example from bootloader screen.
however that's all I know, you don't give any details for a more experienced person to help, what's a helmis? blue angel? try posting in the blue angel upgrade forum, where did you get the rom from etc
thaqnks for your reply, i had Xplode help me and im all sorted now.
cheers
alan
Related
my mda is telling usb v1.00 its a duth one from t mobile and i im trying running the noid.exe with the qtek s100 rom dutch ship, but its still checking now for two hours and still cant get it working.
i cant reset it either
somoene please help me with this one
:wink: this trick works for me :wink:
1.get rthe MaUpgradeUt_noID.exe
2.unpack the update to a folder (just unpack the exe with winrar )
3 replace MaUpgradeUt.exe with the noID one (rename it to MaUpgradeUt.exe )and run it while your phone is hooked up trough cable.
this works for me on several occasions :idea:
jazz-007 said:
my mda is telling usb v1.00 its a duth one from t mobile and i im trying running the noid.exe with the qtek s100 rom dutch ship, but its still checking now for two hours and still cant get it working.
i cant reset it either
somoene please help me with this one
Click to expand...
Click to collapse
from one newbie to another:
taken from http://forum.xda-developers.com/viewtopic.php?t=4534
2. Use a clear subject
So you're going to post a message, and need to think of a subject. Try to keep in mind that many people actually use that subject to determine whether they will even look at your message. If you really, really need help, the subject "I REALLY NEED HELP" is the worst possible choice, because many people will not read it. A subject like "I upgraded to 4.00.16 and now I can't downgrade anymore" is much better: it will get the attention of other people that have solved the same problem, and you are much, much more likely to get a reply.
Hi all
I get this message on bootup serial V1.00 now since,
I re flashed the phone it looks like with the wrong file RUU_v1.1_OrangeUK_v3.66.1.230_ship
What are the steps to get the phone working again.
Please be easy with as I am very new to mobile pc's hence this this massive mistake. I have searched for 5 1/2 hours & are just getting totally lost.
I noted the Windows ver which was on the SPV which was 4.21.
I am getting confused with all the different versions like radio software etc.
Any help would be apprieciated.
Further to that I have found out it is a HTC Magician
Thanks in advance
Get the correct rom for your phone, place your phone in the cradle and start the flashing procedure.
Silly question but how do I find out which ROM it is as I have looked here for the ROM ftp://ftp.xda-developers.com/Magician/Shipped_ROMS/ & they are sooo many of them?
Or is it this one UK_11200_131_11210_ship.exe as I am in the UK how can you determin if it is with Orange?
Regards
CC
that'll serve you right for messing with something you shouldn't have - and now Orange won't touch you with a 20ft bargepole because your warranty is worth nothing now :]
Hi there,
I have a MDA Vario (G4) from T-Mobile and after following this http://forum.xda-developers.com/showthread.php?t=297762 and this http://forum.xda-developers.com/showthread.php?t=293480
I was able to install Faria's ROM on my Wizard but now i'm having some problems:
1 - I still have to watch that ugly bootscreen
(by the way, are those version numbers "right"?)
2 - Every time i reboot it i get this error about sddaemon
Problem solved:
knwlsh said:
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
Click to expand...
Click to collapse
3 - I often get this error about TimeWizard.exe
4 - As you can see on the previous photo, the memory is running low and so I everytime i try to syncronize with ActiveSync 4.5 (Beta2) i get this
Can anyone help me on those?
Thx
(Forgot to say thank you to Faria and Mun_rus. So... Thanks a lot!)
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Did you flash with shell tool? I think that you have no extended rom flashed, only OS.
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
funman said:
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Click to expand...
Click to collapse
DON'T use the 2.26 rom.... u've got a G4 and can't update IPL/SPL!
I downloaded this ROM
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
and tried to flash it but when it starts (the PPC screen turns red,green,blue) it gives me an error msg on the PC saying "ERROR [294]: INVALID VENDER ID"
(this PPC came from UK)
I tried to use the mun_rus How To with this ROM but apparently it stayed the same.
From the UK T-Mobile i can only find this http://www.tm-phonedownloads.com/download_manager_mda_vario.html
but i think this is what a I have now running.
Ideas???
-----------------------------------------------------------------------
As for the Extended Rom i followed this:
http://forum.xda-developers.com/showthread.php?p=1172768&highlight=extended+rom+g4#post1172768
but i will double check it the next time i flash my Wizard.
(deleted - the same as the above)
Problems Aswell
Sorry if this has been mentioned many atime before but my rom is like really slow sometimes and most of the time on the today screen only the time/date is shown and no other items. Also when turning on the device sometimes it doesnt get pass the boot screen (green one) and is resolved by taking the battery out which is annoying. Someone said by putting the orginal factory rom then installing farias rom then it will improve - tried that same thing. And outlook wont let me change email type from plain text to html.
Anybody Know???
seanmig said:
Tried this one:
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
The PPC screen goes red, blue, green but then it gives me an error msg on the PC saying "WRONG ID VENDOR" or something similiar.
Click to expand...
Click to collapse
Missed my post or want a bricked device? You're CID-locked.... look here:
http://forum.xda-developers.com/showthread.php?t=298613
Actually I did miss you post.
Wizard still working
As for the link that you suggest it ends with de Mun_rus' HowTo and that was the one that i followed to flash Faria's Rom
--------------------------------------------------------------------------
knwlsh:
Sddaemon problem solved. At least it seams so...
Hey,
I just did the SAME upgrade you did and I am getting the same
timewizard.exe popup!
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
I have EVERYTHING working on wm6 with faria except for the annoying
popup.
have you been able to get ride of it?
Jeff
jeffr said:
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
Click to expand...
Click to collapse
Is that a WM5 backup you restored? WM6 has stuff in the registry in different places. You've probably added a bunch of keys that shouldn't be there, and in the wrong place.
Also, WM6 PIM database is different format. If you restored that, its likely thats been hosed too.
Hi
Hope somebody can help.
I can't seem to get JumpSPL to run on my Kaiser (yes, im attempting to run it from the PDA not PC).
the unit was a replacement, which when i received it, had WM6 (dont know whatSPL, i guess the default version on all new Kaisers from November 2007.)
Anyway, I upgraded it directly to 6.1 (Official UK O2 rom - which of course doesn't need hardspl flashed).
Ok so then I updated the Camera software to v5 and oh no...radio is incompatible!
Now, Can't upgrade radio to compatile one until I get hardspl installed but Jumpspl not running, (to fix white screen).
HELP!
you have to run a sspl first
copy this to your phone then run it, after you see the usb unplug then replug and run the hardspl ruu
I ranthe file you attached, getting the white screen...
See here. It might help.
http://forum.xda-developers.com/showthread.php?t=396922
ive tried that post already, the two JUmpSPL .exe's dont run at all on my Kaiser, "unisgned applciation " or some error...
onenomi said:
ive tried that post already, the two JUmpSPL .exe's dont run at all on my Kaiser, "unisgned applciation " or some error...
Click to expand...
Click to collapse
When you see the unsigned application message ("This message is from an unknown publisher...", select yes.
I used JumpSPL1.56-KAIS.EXE on my Tilt.
DUH! I know you try to help but that's not what im saying, the JumpSPL.exe's dont even run at all, i get a similar error to that of a !applciation is not a win32 app" as you would ona pc. The kaiser doesnt recognise the exe's. If i got the message "from unknown publisher" i know eough to click yes, but doesnt get that far.
The unit seems to have KAIS130 SPL-3.29 (im guessing this was because of the Official ROM upgrade from O2 of WM6.1.
Is it unable to be hardspl's now?
UPDATE:
Got bored, frustrated with above issue, went to sleep did it this morning with fresh head following http://forum.xda-developers.com/showthread.php?t=396922 again. Thanks all for your valued help.
Hi everyone i am new here i just recently upgraded from a g1 to the touch pro 2 i have loaded the hardspl and newest radio but i cannot get a custom rom installed i have followed all the steps when i try ove computer it always says my ruu cannot open my rom and when i try by sdcard the bootloader screen starts to load sum #"s pop up but then it aborts and i think it says no file found or sumthn like that i have renamed the file RHODIMG.nbh and nuthn...can someone please help? maybe direct me to an custom ruu for a gsm..i would greatly appreciate any help...thank you..
Welcome to forums
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=550540
Only if your Rhodium is GSM!
If its CDMA enter to proper section
Hope it helps,
i have gone thru it step by step and have the hard spl-0.85. 01 iNex, my radio is 4. 49. 25. 57...iven even used the custom ruu that is provided in the thread but it doesnt seem to work with any of the roms ive downloaded from here...and when i go thru sdcard it starts loading then i get a string of numbers at the top of screen 0068sumthn and then just stops and says nomfile i believe it switches really fast my card is formatted to fat 32 but nuthn...i really wna upgrade to another rom im really into it i have upgraded to wm 6.5 and it worked with the shipped ruu...if u could direct me to sum roms that have a ruu in the same folder id greatly appreciate it...and THANK YOU VERY MUCH for responding i didnt think id get one...