A disaster!
My very good friend (Qtek S100 Italian) have a big trouble!!!!
Now it's on boot loader and no way to go out
I think that the rom was f**ked, I try with a SD with the rom(I used Multi-port/USB TTY Ver1.11a to do it with another Qtek) but the PDA don't show the download menu
I tried with the original ROM from Dangard but the program say that the rom was not for my device
I used the MaUpgradeUt_noID, but it's not working
the pda screen is always on boot loader, changing only from serial to USB (when I Connect)
I don't know if I can use Multi-port/USB TTY to solve my situation, I tried to use the lnb command but the answer was that I have not the permission
By the way, I disconnect the battery and wait, but when I give power I have always the boot loader
Any way to help me? tnx
Stefano
Hi,
I have XDA Neo and last night, I upgraded my Neo (G4) to jesterz AKU 2.3 ROM with 8MB poolsize and after successful upgrade, I get first bootscreen with IPL, SQL and GSM but nothing happens after that as it just get stuck at this screen. Then I am resetting this device and then it gets into bootloader screen. I have tried doing hard reset using Comm+Camera+Reset Button but it doesn't halp as well...as it gets into bootloader again.
Could you guys help me to get my device working again?
Thanks.
downgrade to an original rom
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Abib said:
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Click to expand...
Click to collapse
You people should read before touching custom ROM's!
Hold both the camera and comm button to get in the 3 color screen. Then flash with an original ROM.
Wilson77 since you have a G4 device you can't just flash it with any ROM. Check the forum on flashing your G4 device.
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Abib said:
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Click to expand...
Click to collapse
LOL Noting wrong with cuiosity, on the contrary. But flashing the wrong way (specially the G4) may brick your device. Were just tryin' to prevent that by providing you with a lot of information
i was installing kotas ver "c" rom. during process my pc suddenly shut down and after restart i am not able to recover the process and my polaris stuk or hang at boot loader skin. during the process i forget to remove the memory card. previously i was using "M. Amine 2.0" rom. i also tried the matty but unsuccessful, when i select usb it gives an error "can't read from usb".
help guys???
If you see the bootloader you can still flash a rom try another one or another method maybe with SD flash
i successfully resolved the problem. when i take my poris to HTC center they ask me change the motherboard, thanx to imfloflo for suggesting me that i can still flash it with SD. And special thanx to taiseer999 for the post of "How to flash your Polaris using the microSD card [Guide]" and Whitealin for "[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode. ". I am really thankfull to you guys. You guys are grate.
Hi guys,
My Imate SP5 is stuck at the first screen where the IMATE logo (clubimate.com) comes up and then it does proceed any further ....and after about a minute it becomes blank.
I tried to do a hard reset but even that ended up in the blue screen .
I got it into the bootloader mode and tried to load a fresh rom . However the tera term pro says that it cannot open the device.
I am stuck at this point and cant proceed further ...
Please help
Farhan
Did you disable USB in Active Sync?
help me
I'have imate kjam
g4
I download room for my phone and while downloading Appeared to me error on my computer and on mobile boot loader which (green ,red,blue)
Mobilestanding on the boot loader
And i tried download many rooms and the same resault boot loader.
i want any room that ican download it from boot loader
and i replaced battery and turned on mobile iget the same resault boot loader
please help me!!!!!!!
Problem has been resolved
Solution for knowledge and to benefit others
First, I am sure that mobile unlocked
second I got a radio
third
Then I got any room for my mobil