Hi Jester and all friends from this forum,
I am not a newbee using of a PDA, I am working with wm2005 for more than a year, but I am still a newbee with my new S200.
I installed this very nice rom AKU3.3-Jester-b1, and after installing the battery fix everything seemed to run normal, except the camera!
I find probs like I have on my hima running aku 3.3 or 3.5, such as rotated pictures. Only with this camera the probs are worse. The pictures are not stored where I wanted to store, even when I change the target. But even worse, the pictures are completely wrong (see below). I installed the camera patch from this forum and maybe this is causing more probs. I takes a lot of time to save the pic and most of the time you need to press the camera button again to stop it, then you find this result.
Does anyone have a solution?
I have a JAMin G3 with this same ROM and no camera patches, and I do not have any problem with the camera, neither taking pictures nor having it save them directly to the storage card instead of the main memory.
Maybe you put the patch that enables the extended memory for writing? The camera then tries to save there, it does not see the SD card. Or maybe you have afaulty SD card?
eddyve said:
Hi Jester and all friends from this forum,
I am not a newbee using of a PDA, I am working with wm2005 for more than a year, but I am still a newbee with my new S200.
I installed this very nice rom AKU3.3-Jester-b1, and after installing the battery fix everything seemed to run normal, except the camera!
I find probs like I have on my hima running aku 3.3 or 3.5, such as rotated pictures. Only with this camera the probs are worse. The pictures are not stored where I wanted to store, even when I change the target. But even worse, the pictures are completely wrong (see below). I installed the camera patch from this forum and maybe this is causing more probs. I takes a lot of time to save the pic and most of the time you need to press the camera button again to stop it, then you find this result.
Does anyone have a solution?
Click to expand...
Click to collapse
have you overclock your s200? if yes, don't overclock and you will see a miracle
by the way... can i synchronizise via Bluetooth with this Rom?
thanks
When I was on AKU3.3 I used to have intermittent problems with the camera too. It used to show some funny green lines but closing the camera and opening it again used to fix the problem (sometimes).
Using the camera when overclocked was impossible.
kta said:
Using the camera when overclocked was impossible.
Click to expand...
Click to collapse
Interesting, I didn't know that. Probably coz I only overclock when using GPS or playing some heavy game.
don't overclock your CPU and camera stays fine...
green scanlines, weird photos and videos only happen when your prophet is overclocked!
this is an old issue... more than discussed here... just read the entire thread.
BR
c2s.vdg said:
don't overclock your CPU and camera stays fine...
green scanlines, weird photos and videos only happen when your prophet is overclocked!
this is an old issue... more than discussed here... just read the entire thread.
BR
Click to expand...
Click to collapse
hi,
are you still use Aku 3.3.07 from aserg? i want also upgrade, but not sure, if i should take aserg's or Jesterz's-
What do you think, witch one is more stable. I don't need USB charge, but i syncronisize via Bluetooth very often... so in this case, bluetooth frofile must ok, also after softreset
kta said:
Using the camera when overclocked was impossible.
Click to expand...
Click to collapse
WRONG!
I am running my prophet at 252MHz, and my camera is perfectly fine!!!! No green pixels, no funny pictures! The only trick is you need to install the old camera driver from JAMin 2.13 ROM or Dopod 2.15 ROM. The QTEK 2.20 ROM use a new camera driver, but unfortunately, the new driver is not compatible with overlocking.
I installed the QTEK 2.20 ROM, and installed the old camera driver, and then everything is perfectly fine.
Just one thing, if you are using AKU3.3 ROM or QTEK 2.20 ROM, and if you want to overlock your prophet, you have to install the old camera driver!!!!!!!!!!!
John-Wu said:
hi,
are you still use Aku 3.3.07 from aserg? i want also upgrade, but not sure, if i should take aserg's or Jesterz's-
What do you think, witch one is more stable. I don't need USB charge, but i syncronisize via Bluetooth very often... so in this case, bluetooth frofile must ok, also after softreset
Click to expand...
Click to collapse
John-Wu
the ASerg's AKU3.3 seems a lot more stable and bug less than the Jesterz one...
im my phone BT profiles are kept after every softreset...
and most important... it does not crash like Jesterz AKU 3.3 did with my prophet.
but still this is far from being the perfect rom...
the msn/live messenger doesn't work, the screen stops responding to the stylus some times and you need to realign the screen, rear speaker plays along while using headphones or BT headphones (needs a softreset everytime you connect the headphones to solve this), and some other minor, but some times crucial bugs...
but returning to the question... yeah mate, give ASerg's AKU3.3 a try!
BR
Camera prob
Hi guys,
Sorry but I am not overclocking my S200, still have this weird pictures. I did install the camera patch and hope dit would solve my problem, but no way! Can anyone post me a good (old) camera, pls?
coolfire74 said:
WRONG!
I am running my prophet at 252MHz, and my camera is perfectly fine!!!! No green pixels, no funny pictures! The only trick is you need to install the old camera driver from JAMin 2.13 ROM or Dopod 2.15 ROM. The QTEK 2.20 ROM use a new camera driver, but unfortunately, the new driver is not compatible with overlocking.
I installed the QTEK 2.20 ROM, and installed the old camera driver, and then everything is perfectly fine.
Just one thing, if you are using AKU3.3 ROM or QTEK 2.20 ROM, and if you want to overlock your prophet, you have to install the old camera driver!!!!!!!!!!!
Click to expand...
Click to collapse
Where I must insert a old driver? What directory?
Copy the camera driver file via activesync into your prophet to any directory you want (like TEMP directory), and than tap on it with the stylus.
I have done as you say but nothing doesn't happen. every file makes me this error: there are no in partnership applications. to start the application and to retry. but I cannot start the camera. how do I do?
Problem Fixed! I'm very happy!
shayd said:
Copy the camera driver file via activesync into your prophet to any directory you want (like TEMP directory), and than tap on it with the stylus.
Click to expand...
Click to collapse
How can I do this, since I can't see anything on my QTEK screen !?!?
Thx for helping me out, this screen thing is driving me crazy !
Kind Regards,
Edu (Kokiri)
Thank's
This camera driver good work
coolfire74 said:
WRONG!
I am running my prophet at 252MHz, and my camera is perfectly fine!!!! No green pixels, no funny pictures! The only trick is you need to install the old camera driver from JAMin 2.13 ROM or Dopod 2.15 ROM. The QTEK 2.20 ROM use a new camera driver, but unfortunately, the new driver is not compatible with overlocking.
I installed the QTEK 2.20 ROM, and installed the old camera driver, and then everything is perfectly fine.
Just one thing, if you are using AKU3.3 ROM or QTEK 2.20 ROM, and if you want to overlock your prophet, you have to install the old camera driver!!!!!!!!!!!
Click to expand...
Click to collapse
Related
There is two fixes for the JAM...:
First one to fix MMS problems (Unable to send & receive)... See attached file...
The second one is Photo quality enhancement ROM upgrade... find it here...:
http://www.seeo2.com/support/XdaIImini/template/ServiceMenu.vm
I hope somebody can upload it for us here cause we need IMEI for XDAmini devices...
what exactly does it do?
I would like to test the Photo quality enhancement ROM upgrade on my MGA compact.
But i cannot get it (o2 IMEI needed!)
Anyone, please?
It seems the new extended rom included a patch file which will increase the default sharpness of the camera program.
The default sharpness setting is 10 now.
The attached file is the patch extract from the new extended rom.
I have tried the Photo Enhancement ROM, it made my O2 XDA MINI pictures worst...pictures got many white spots! Now, I dont know what to do.
Eiso the upgrade works fine with my MDA Compact so do not terrorize other MDA users with your problem! Your problem most probably has to do with a fawlty camera! Try to check with the service from where you bought it!
Photos are much better especially in low lighting conditions now!
Messed up my JAM
I think this must be specific to certain ROMs. My ROM 1.0.3.00 WWE with Middle East extensions (Arabizer etc etc) and this update completely messed up my Today screen with zig zag horizontal lines. Had to perform hard reset.
Seem not to work on my german t-mobile MDA compact, ROM 1.01.01 GER.
Same prob as cdx47 mentions (messing up today screen, easy to solve, just change today theme)
and
no visible changes in camera results, no changes in default sharpness value.
Does it really give better pics with other ROM versions?
Re: Messed up my JAM
cdx47 said:
I think this must be specific to certain ROMs. My ROM 1.0.3.00 WWE with Middle East extensions (Arabizer etc etc) and this update completely messed up my Today screen with zig zag horizontal lines. Had to perform hard reset.
Click to expand...
Click to collapse
You dont have to hard reset! That thing happens even if you restore a sprite backup too! You only have to change the theme to another one and then again to the one you want and everything will be ok!
More than that you need 2 files from the o2XDA mini exntended rom to fully install the upgrade. You will find the whole extended ROM of o2's XDA mini at the FTP server! I am using the imate arabizer ROM too and it works fine with my German MDA Compact!
Re: Messed up my JAM
katsj said:
you need 2 files from the o2XDA mini exntended rom to fully install the upgrade. You will find the whole extended ROM of o2's XDA mini at the FTP server! I am using the imate arabizer ROM too and it works fine with my German MDA Compact!
Click to expand...
Click to collapse
May you please post the 2 required files for this upgrade?
Thanks in advance.
What does this camera patch/upgrade do? Does it just increase the default sharpness level?
I have downloaded the 2 patches for camera from XDA mini ROM which are:
1- CameraWizard_O2Asia_Customize.CAB
2- CameraWizard_WWE_B19_to_RC14.CAB
the first one is about 58KB only and it has nothing to do with improving the photo quality, it is only to adjust the capture size when taking contact Photo.
the second file which is about 746KB contain same camera version 2.7 but newer build, but when i installed it i have lost all the colors and i stuck with gray scale photos only.
it seems this file will not work on all ROM version! for me, i am using original imate JAM ROM. other users with MDA devices don't have any problems with this file!
Regards.
alkandery75 said:
There is two fixes for the JAM...:
First one to fix MMS problems (Unable to send & receive)... See attached file...
Click to expand...
Click to collapse
I just can't get the MMS functionality to work on my Qtek S100! :?
When trying to send/recieve it connects to the operator (Vodafone) but after that nothing happens. I can also see the small yellow sending icon at the top of the screen but still nothing happens. I'm quite sure I have set upp MMS correctly (with information from the Vodafone web site).
I also installed the MMS fix (posted on this thread) but it still doesn't work.
Anyone else having problems with sending/recieving MMS:es?
Thanx!
Hi,
Anyone tried this MMS-patch on a QTek S100? I tried to get MMS work on a S100, but it doesn't work to receive MMS-messages...
I know there is a new ROM available, but does anyone has the patch for MMS out of that ROM?
Sam
katsj said:
Eiso the upgrade works fine with my MDA Compact so do not terrorize other MDA users with your problem! Your problem most probably has to do with a fawlty camera! Try to check with the service from where you bought it!
Photos are much better especially in low lighting conditions now!
Click to expand...
Click to collapse
Katsj, do you have any sample photos from the old and new rom to compare?
I'm using a Qtek S100. No problem with MMS. Works fine (send and receive). Tested with Orange CH.
jacoch said:
I'm using a Qtek S100. No problem with MMS. Works fine (send and receive). Tested with Orange CH.
Click to expand...
Click to collapse
did you run the patch? or did it work standard, mms is not working standard on my QTek S100
greetz
No patch. But I installed the french rom. Don't remember if I tried MMS with the original english rom.
I just ran the patch above on my QTek S100 and now MMS seems to work smooth, so for everyone who doens't do the ROM update this is a solution,
thx y'all
ammar said:
I have downloaded the 2 patches for camera from XDA mini ROM which are:
1- CameraWizard_O2Asia_Customize.CAB
2- CameraWizard_WWE_B19_to_RC14.CAB
the first one is about 58KB only and it has nothing to do with improving the photo quality, it is only to adjust the capture size when taking contact Photo.
the second file which is about 746KB contain same camera version 2.7 but newer build, but when i installed it i have lost all the colors and i stuck with gray scale photos only.
it seems this file will not work on all ROM version! for me, i am using original imate JAM ROM. other users with MDA devices don't have any problems with this file!
Regards.
Click to expand...
Click to collapse
Could you please upload the second patch somewhere to let us download it and let us try it on our devices?
Thanks in advance!
I installed WM2005 1.70.96WWE II from the link given in the forum. I also installed radio 1.08. The phone works excellently well except for the fact that my camera does the following:
1. camera resolution is bad (compared to wm2003)..btw i have an imate pocket pc(basic version).
2. camera is rotated.
3. camera button(after re allocation of shortcut) works and application loads up.However the photos dont click.
Some one please help out.. Its real urgent .
Thanks
AJ
go to http://buzzdev.net for your solution....
Problem with Camera on Mobile2005
I'm having the same problem here. The resolution is really bad. Windows Mobile 2003SE works a lot better ? Why ?
I tried going to buzzdev.net but still couldn't find an answer.
Looks like , there is new WM6 ROM now (did not try it, for now).If somebady test it let as know.
dido said:
Looks like , there is new WM6 ROM now (did not try it, for now).If somebady test it let as know.
Click to expand...
Click to collapse
Downloading it. Will test it and report
what's the key search word?
I would search on the site (something like ppc and warez) where you could get the orwells1984. Same thread.... at the bottom of page 18. Haven't tried it myself yet.
vippie said:
I would search on the site (something like ppc and warez) where you could get the orwells1984. Same thread.... at the bottom of page 18. Haven't tried it myself yet.
Click to expand...
Click to collapse
Preliminary Review:
-----------------------
It is a PPCtuning.org ROM. It seems it is pretty fast with total commander, OMAP clock, Screen Off, keyboard fix, Simple plain fast ROM.
BTW: it is in the same place as the PDAviet4
look for that thread and you shall find it.
I just guessed and it was right there at the top.
is this really new rom or another orwells workaround?
does it have mms included?
other changes?
it has a cab for mms that you can install after.
Camera is working but i have some strange flickering...
Nice boot picture.
I`ll see if it steel hangs...
I was using pdaviet 3 and was ok. pdaviet 4 was a mess....
The only problem i had in pdaviet 3 was crashing of device.exe from time to time...
camera strange flickering
downloading the the underground crossbow now will let you know how it is
i found that if i uped the clock speed to much the camera flickered on pv4
Does someone know if java midlet manager is integrated into the rom?
underground edition crossbow
splash screen looks good
when install cabs security feature disabled
camera works no flickering
omap clock installed clock is set at 228 edit the smartskey.ini file in windows dir with tc and change to what you wish
after reset quick to reload
keyboard not right press y and you get z
if anbody has fix for the keyboard please post it in the mean time if i find on the threads i will post it when i find it
if anybody wants to know were they get the rom from pm me and i will point you in the right direction
easymob said:
downloading the the underground crossbow now will let you know how it is
i found that if i uped the clock speed to much the camera flickered on pv4
Click to expand...
Click to collapse
Yesssss! it was the overclocking... i set my speed back to 195 and camera works perfect!
Radio is included (2.47) and now I have to upgrade to 2.61 again.
First impressions - rom very good.
Missing some apps to be perfect (battery status, wm5 new menudryar-bluetooth, oxios memory).
It's based on orwell rom so there's no start menu sound fix included, voice command fix too.
This morning installed this underground edition..
after latest Molski, faria 3.3 V1, V2 and PDAVIETV4; this is the best one yet for me...
This one is smoother, faster and has evertything in it i want (mindlet also incluided; you have to install it afterwards from the install folder)
so if it stays this stable this is a winner.... and it looks like it.
This morning installed this underground edition..
after latest Molski, faria 3.3 V1, V2 and PDAVIETV4; this is the best one yet for me...
This one is smoother, faster and has evertything in it i want (mindlet also incluided; you have to install it afterwards from the install folder)
so if it stays this stable this is a winner.... and it looks like it.
Man I must be stupid or something. I have been looking all over and cannot find this rom and I am no NOOB?! I have a hard time on some of these non-english sites. If someone takes pity on me could you pm or email me a clue (or the link)?
Cause I have no clue now
Thanks,
Master K
[email protected]
Master K said:
Man I must be stupid or something. I have been looking all over and cannot find this rom and I am no NOOB?! I have a hard time on some of these non-english sites. If someone takes pity on me could you pm or email me a clue (or the link)?
Cause I have no clue now
Thanks,
Master K
[email protected]
Click to expand...
Click to collapse
Try google IW25NT
donwloading now. thanks for the help.
I've tried most ROMs on my wizzard, just hope this one is smooth enough for daily use. Faria's last release spoiled me....
u can also download it from here a direct link to the file underground edition crosbow:
http://rapidshare.com/files/16510198/5._Underground_edition_Crossbow_ROM.zip
This ROM is VERY good. I had been using Faria's latest on my phones but this is slightly better. Voice Command is in rom but needed the BT fix from another thread to amke the headset work right. A few tiny tweaks but 99% of my software is in and working great! It is fast and there is tons of memory.
The only thing I have not been able to overcome is lack of midi support. All my old .mid ringtones will not work at all. WM player will not play them anymore. From reading on the web I guess it's actually been up to device oems to include midi support even with WM5 but this rom does not have it. Perhaps a later one will. For now it's not big deal and I am moving on with this rom. Good Stuff!
As the title says, this is a WinMo 6.1 hybrid, with Vodafone ROM + Radio (both newest), OEM section from the HTC latest build and .net CF / SQL Mobile removed so that you can switch between either 2.0 or 3.5 installs at your leisure using the appropriate CAB (good for developers who are testing!)
This ROM is therefore 'in a HTC style' but with the good bits from the Vodafone ROM.
NO OTHER CHANGES!
Aside from .net changes, the contents of this ROM are completely stock.
DOWNLOAD:
ftp://xda:[email protected]/Upload/TLR/TLR Kaiser Hybrid 1.08.02.04.rar
Edit from Sleuth: you can't host ROMs on XDA Developers FTP site. M$ has sent us a notice of legal action for this. Plz use some other service then post a link here.
Edit by TLR: Look closely, it's not the XDA Developers FTP site.
.NET CF 3.5 REDISTRIBUTABLE DOWNLOAD:
http://www.microsoft.com/downloads/d...displaylang=en
NOTE: You will need to flash HardSPL on your device first to flash this ROM!
Well done mate, could be great rom for the chefs to work with!
Everyone knows a higher number is better
Sounds EXACTLY like what I was looking for
theloanranger said:
DOWNLOAD:
ftp://xda:[email protected]/Upload/TLR/TLR Kaiser Hybrid 1.08.02.04.rar
Click to expand...
Click to collapse
Sounds great, but can't download!
Any other links?
great work!
am using this rom now and i like it!
works fast, after tweaks and all - very very nice
tried the 3.03 one - nice and fast but couldn't handle the cannot soft reset issue
i soft reset quite often to keep memory and all clean and neat
so didn't like having to pull my stylus to do that all the time esp when i notice the stylus holder getting a little looser...
then tried the vodafone one
everything was ok - but seemed to be laggy on some programs (visible on graphics and video)
then i got onto this hybrid! and must say i am really quite happy.
used ppchanger to set to 50mb but just read a post by tom_codon that it doesn't actually change the pp and it has to be done by XIP so not sure if that madeany difference...
Working now.
Any screenshots plz? Thanx
it works great, but has a MoDaCo thing on splash screen xD.. that sucks.. well maybe a splash screen flash can fix it..
well.. in general it works fine, it looks like the HTC stock rom and it has better performance than the other 2 "official" versions.
Reccommended (Y)
(( If you know how to put the original "smart mobility" plain text splash, PM me thanx ))
Any feedbacks with this rom ? How is battery draining ?
MickyMax said:
Any feedbacks with this rom ? How is battery draining ?
Click to expand...
Click to collapse
battery drain is very low. getting very good battery life with this rom
anyone have the atnt splash screen only? thanks.
Hi
I like this ROM as well, been good so far.
One oddity which I'm not sure if was the case on the stock Vodafone ROM, is when I've imported text messages from a backup these are not sorted correctly in the threaded SMS. For example all the ones I've sent are at the end and all the ones received are at the beginning, so they are not sorted from a backup and so are not threaded correctly. When new texts arrive these are okay and show as expected. This could be a problem for those who like to keep a history of texts and need to restore from a backup.
Regards
Phil
Seems to be working great so far on my ATT Tilt. TMobile subscriber. BUT, I need to get the CF back on, so I'm trying to figure out the easiest way to do this. Also, do you do anything to the bluetooth stack that should impr0ve performance over OEM?
tex_tech_monk said:
BUT, I need to get the CF back on, so I'm trying to figure out the easiest way to do this.
Click to expand...
Click to collapse
Install the framework http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&DisplayLang=en
tex_tech_monk said:
Also, do you do anything to the bluetooth stack that should impr0ve performance over OEM?
Click to expand...
Click to collapse
You can use KaiserTweak... works great with me !
OK, new issue... the keyboard is not working exactly correctly with this ROM on my Tilt. The keys are remapped for the function combos (perhaps others, but have not noticed). I'll search for a solution, but if anyone can point me in the right direction...
use the tilt keyboard fix. u can find it in duttys place.
cheers
Got it! Worked great. Thanks. Now I'm readying for the .08 version of this ROM package.
Grateful for the efforts by all the posters here!
Just checking if anyone at all has gotten TouchFlo 2d working on the wizard. I'm using j.vd.spank's wm6.1 and all I get is a today plugin which says click here to launch TouchFlo or something like that, but nothing shows up on clicking.
Is this a rom problem or is something incompatible with the wizard?
I've just tried yesterday. Same problem.
Yeah I Recommend Not To Install As Me Too Faced It & Had To Reset My Pda
Same problem here. Only TouchFlo Message on Toadyscreen.
me too!!!
I780 - 320x320 resolution - 128 dpi (the same with 96 dpi)
I got one of the first versions to run but the wizard is toooooooo slow to handle it. it was running at 1.97 frames per second and it looked like it needed to be around 24 to function. Great looking program but my wizard is slow.
The first version was Touchflo 3d which required more intensive processing. TouchFlo 2d seems to work fine on other (similar to wizard) xdas.
perhaps it would work if it were cooked into a rom?....can we get one of the cooks to see if that works?
Same Problem Here...
Maybe a rom Cookers can search the missing(s) file(s) ?
I think its doesn"t work because one (or a lot) of file(s) are/is missing on the wizard.
Or (if my brain is not corrupt) like the TouchFlo Port, its maybe a missing Reg Key.
c4software said:
Same Problem Here...
Maybe a rom Cookers can search the missing(s) file(s) ?
I think its doesn"t work because one (or a lot) of file(s) are/is missing on the wizard.
Or (if my brain is not corrupt) like the TouchFlo Port, its maybe a missing Reg Key.
Click to expand...
Click to collapse
I'm trying to get this into a rom and will report back on how it goes
it does not look like it's going to work straite out of the box
any idea what is the problem gollum?
maybe we will need some special hack to get this working on our wizards?
I've tried this on both 20273 (tnt's b3 release and another) to no avail, so even some ported from diamond dont seem to work. someone on an engadget mobile comment said they got it to work. what could we be missing?
That would be me(Christian Walters) on the Engadget Mobile comment that said it worked...and it did...twice. I got it too load on a hard reseted Wizard runnin the beta one of the newest TNT ROM, but never again...I dont know whats wrong with it:/
ashasaur said:
That would be me(Christian Walters) on the Engadget Mobile comment that said it worked...and it did...twice. I got it too load on a hard reseted Wizard runnin the beta one of the newest TNT ROM, but never again...I dont know whats wrong with it:/
Click to expand...
Click to collapse
Hi Chris! Bummer that we can't get it to work again, and after all that time installing too
For me on the lastest TNT Rom it never started realy realy strange.
c4software said:
For me on the lastest TNT Rom it never started realy realy strange.
Click to expand...
Click to collapse
Same thing here. Let's hope Gullum comes up with a nice working rom (thanks in advance for the hard work).
i'm sure its due to a missing reg key (or DLL)... if only trace debugging tool exist on WM.
Hmm bad news :
ELVES
Polaris
Kaiser
Artemis
Hermes
NIKE
Herald
Trinity
Titan
All devices of this lis have an QualComm chip... Manilla 2D use certainly native routine of this processor so using it on an ARM based device are certainly impossible.
c4software said:
i'm sure its due to a missing reg key (or DLL)... if only trace debugging tool exist on WM.
Hmm bad news :
ELVES
Polaris
Kaiser
Artemis
Hermes
NIKE
Herald
Trinity
Titan
All devices of this lis have an QualComm chip... Manilla 2D use certainly native routine of this processor so using it on an ARM based device are certainly impossible.
Click to expand...
Click to collapse
You are wrong, not all of those devices have qualcomm chip. Hermes have samsung and it works on touch which has omap 850 processor.
Sorry for this quickly conclusion, i hope Golumm (or anybody else) find the way to use it on wizard
I've got some of the apps to work on but not manila yet but I will try again and again and again
I'm shure it's just some dll thing