I have used the backpack, really very slowwwwww with screen mirror! anyone face the same problem? Pls help!
tcnk said:
I have used the backpack, really very slowwwwww with screen mirror! anyone face the same problem? Pls help!
Click to expand...
Click to collapse
Well, I have been saying that for ages, you are the first one who share this with me!
Yep, it is too slowwwwww with me too, but I found a little trick to avoid that!
In the Screen Mirror, go to "Refresh", set the "Predefined Settings" to "PIM, Word, Database". This will make Screen Mirror quite fast and acceptable.
If you set it to be "Photo/Presentation", then the imate will be too slowwwww, while if you set it to be "Animation" or "MPEG video", then the Screen Mirror will never work again!!! and there is no way to use it or make a presentation. I had to Hard-Reset my iamte to change the settings to "PIM, Word, Database"!!
Any way, I was able to make a prsentation on the setup of "PIM, Word, Database", but can not make the display in landscape!!, or, I can run the show in the normal portrait display, using "stretch" option in "layout" but it looks ugly!!
What did you do in this regard?
Luckily, I didn't buy the backpack that I planned to buy soon.
That means I've better to use my notebook to do presentation.
Thanks guys for your comments.
chris_khho said:
Luckily, I didn't buy the backpack that I planned to buy soon.
That means I've better to use my notebook to do presentation.
Thanks guys for your comments.
Click to expand...
Click to collapse
The presentation software that comes with the backPack is fantastic. Do not confuse it with Screen Mirror which is the apllication that simply projects your entire PDA screen. Screen Mirror is certainly handy for training in PDA software applications but not used for powerpoint presentations.
One feature the BackPack presentation software has that the laptop does not is the ability to project only the presentation slides (via the lcd projector) but display both the speakers notes and the presentation slides on the screen of the PPC. I find this very handy as I use the speakers notes for questions and answers as part of my test for understanding slides.
Ed
I guess "Chris" and most users (including me) are looking for Powerpoint presentations, if you only need the BackPack for presentation, it will not help at all!! unless you need it to use CF Card!, then it might be useflul to have it, and as you "Ed" mentioned, to make a presentation about xda, to project the data, then yes, it is good to have as well.
Note that Windows 2003SE (2nd Edition) has good features that will help in presentations! (the Landscape View and 640X480 resolution)! I am waiting for it to update my imate and then try BackPack for presentation once again!
Sorry GoldenSands I don't understand
I think the backPack works great for powerpoint presentations, that's the main thing I use it for. I have the presentations saved either on an SD card or a CF if I have to take a lot of large files. But even from the SD or main memory the presentation software works a treat. The backpacks battery is smaller but it does prolong battery life and that is a bonus too. Without the BackPack I cannot use my XDA II for presentations.
What do you mean
if you only need the BackPack for presentation, it will not help at all!!
Click to expand...
Click to collapse
Sorry not trying to be silly I just miss your point.
Ed
Dear Ed, may be I did not express my thoughts very well. When I did a presentation using the backpack, I had the following problems:
1- Imate is slow.
2- Presnetation is in portrate, not in landscape (as normal Power Point presentation).
3- Small size (small resolution) not in 640X480.
4- If I use Stretch Option (to get large projection), then quality is poor.
Now, taking above points into consideration, presentaion done through backpack is not powerful and I can not do any presentaion, although I need it badly, I do about 3 to 4 presentaions a week!
That's what I meant by buying it for presentaions (to do Powerpoint ones) will not help since I have to design the Powerpoint presentation in certain size to fit the backpack limitations.
My questions:
1- Are you able to make the presentaion in Landscape?
2- Were you able to use 640X480 resolution?
3- How fast is your imate or xda2 when you use Speed Mirror?
4- What is the version of Speed Mirror you have? (mine is Ver 2.01)
5- In VGA Refresh Settings, do you set it to be "PIM, Word, Database"? or something else?
Regarding the battery, I agree with you, it is a small added value component (600 mAm) only, but it is good to have any way.
GoldenSands said:
My questions:
1- Are you able to make the presentaion in Landscape?
2- Were you able to use 640X480 resolution?
3- How fast is your imate or xda2 when you use Speed Mirror?
4- What is the version of Speed Mirror you have? (mine is Ver 2.01)
5- In VGA Refresh Settings, do you set it to be "PIM, Word, Database"? or something else?
Regarding the battery, I agree with you, it is a small added value component (600 mAm) only, but it is good to have any way.
Click to expand...
Click to collapse
OK, seems like you do things different than me.
Firstly I do not use ScreenMirror for presentations, I use ClearVue Presentation Suite v2.3.377 which came on the CD with my backpack.
Presentations work at "normal" speed with transition effects etc. And as I said earlier I do like ability to see the speakers notes on my XDA II but only project the slides to the LCD projector.
Next in answer to your questions above.
Q1. Yes (Using ClearVue)
Q2, Yes (Using ClearVue), 640 x 480 x 64k @ 85Hz or 800 x 600 x 64K @ 60Hz
Q3. As I said I do not use SpeedMirror for presentations. By the way, my Mirror application is called ScreenMirror v2.01, NOT SpeedMirror, are they different? Anyway, when I use ScreenMirror yes it can be slow but is OK for how to teach using PPC applications etc and it only operates in Portrait. I do not use it for power point slide shows.
Q4. When I use it, and that is not often, I usually have it on PIM, Word, Database. For example It has been OK on how to teach people to use SpriteBackupPremium at a PPC user group meeting. No need for landscape as it is an application to Mirror the PPC screen, that is it only projects the PPC exactly as it looks in on your hand unit. That is why it is good for teaching how to use the PPC applications.
Hope this helps.
Ed
ednap said:
OK, seems like you do things different than me.
Click to expand...
Click to collapse
Dear Ed,
Yep, I guess I was totally not aware about making the presentation through the ClearVue PPT directly (without using the Screen Mirror)!
I went to "Setup" / "Preferences" in ClearVue, then was surprised about the option that allows me to use External Video Adaptor! That was the reason; I was using Screen Mirror (not Speed Mirror).
Thanks for your advice, that's the benefit of this forum, we learn from each other. However, I need a little advice from you, when I choose to use the "External Video Adaptor" in ClearVue, using VGA as an Output. Then try to open a presentation, an error message appears saying "Another Presentation viewer is running, please close the other viewer and try again". While there is nothing else is running. I have even re-installed the VGA Package!
Well, one time after several trials, I got different message: "The External display is in use by another application. Would you like to continue to use the external display?" whatever I chose, nothing appears in the screen.
Note that I am making all these tests using the Monitor, not the projector, do you think this make a different?
ednap said:
Hope this helps.
Click to expand...
Click to collapse
Yep, it helped a lot. Please let me know if you had experienced such problems with the imate and BackPack.
Thank you..
Well I'm glad my coments helped and we are both talking the same language now
I just tried using ClearVue and the backpack connected to my PC monitor rather than my LCD projector and it still worked fine for me. No errors like you mention in your post. So what you are doing should work.
I presume you tried performing a softreset with backpack and monitor connected, then before starting any other applications load clearvue, open your presentation file, then tap on the slideshow icon?
Not sure what else to suggest but please post your results.
BTW, where abouts in Saudi are you? (from your flag) I worked there for a couple of years about 7 years ago. I was in Al Jubail but managed to explore the entire country including the empty quarter. Had a great time and still have some friends there.
ednap said:
Well I'm glad my coments helped and we are both talking the same language now .
I just tried using ClearVue and the backpack connected to my PC monitor rather than my LCD projector and it still worked fine for me. No errors like you mention in your post. So what you are doing should work.
Click to expand...
Click to collapse
I was away for a short business trip. However, I was trying to do more tests and more research. I still get the same error, but what surprised me more today, even if I try to open any presentation using ClearVeu (selecting the option of using External VGA) while the BackPack is not attached; I still get the same error. I also connected the imate to my projector, it works OK with Screen Mirror, but never worked with the ClearVue. I did a lot of trials and restarts.
I also did a little research, and I found this useful link. But I guess I am alone getting this error!!
http://www.ppcw.net/index.php?itemid=1916
Remaining one more test to do, I will use the imate of my brother-in-low, I am going to install the Screen Mirror Software along with ClearVue (of course) and will try to run a presentation, lets see what error we get! hope it works, if so, it means then my imate (or Windows) might have a problem since BackPack works OK.
By the way, what Rom version are you using, is it 1.72 or 1.66?
ednap said:
BTW, where abouts in Saudi are you? (from your flag) I worked there for a couple of years about 7 years ago. I was in Al Jubail but managed to explore the entire country including the empty quarter. Had a great time and still have some friends there.
Click to expand...
Click to collapse
That's nice, Juabial is not far from where do I live. I live now in Dhahran (almost 100Km away from Jubail). I have not been in Empty quarter or even a lot of places, except major cities in Kingdom!!
I'm using the 1.66 ROM , standard rom from when I purchased the unit. I have been happy with it so did not upgrade to another.
I'm surprised with your error and I do hope you can get it sorted out as the ClearVue really is fantastic software.
Ed
ednap said:
I'm using the 1.66 ROM , standard rom from when I purchased the unit. I have been happy with it so did not upgrade to another.
I'm surprised with your error and I do hope you can get it sorted out as the ClearVue really is fantastic software.
Click to expand...
Click to collapse
Mmmm, you gave me a good hint again! I will test ClearVue with BackPack and try to make a presentation on 2 imates, one with 1.72 ROM and another one with 1.66 ROM. If it worked, then will see away to downgrade mine to 1.66!! I will try to do this test ASAP. Thanks a lot dear.
Bug in ClearVue
I'm having the same bug with ClearVue with the message "another presentation viewer is running, ...".
I visited the Westtek website and found that there's an updated release of the software. They want money for the update.
I think that the whole thing is offensive. Selling an untested application is offensive, asking for more money to fix it is offensive. I wish I could throw the product back in the face of the Dubai Duty Free employee.
BTW, no one should downgrade their ROM to get one crappy application to function.
Just wondered if you guys had seen this page, on O2 site for a ClearVue update for 1.72
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/VGA_Backpack.htm
I don't have a backpack, so I can't test it but it might solve your problems!
HTH
Fin
Bug in ClearVue and the Expansion Pack
I tested the update and it didn't work. I wrote to club i-mate support.
I'll keep you posted on their reply.
Thanks to all for the forum.
Dear "findus", thanks a lot for the link, but as "OZK" has mentioned, it did not work, hope some one has a solution!
Replies regarding the Presentation Viewer Bug
Club i-Mate:
Thank you for writing in, I personally tested the i-mate back pack with version 1.72 and did not come up with any error messages.
Westtek:
I have not been able to reproduce the problem. Please try the following and let me know at what step you get the error message.
1. Soft reset your device
2. Open ClearVue Presentation
3. Open a Presentation file
4. Run a Slide Show on your pocket PC (without configuring external video)
5. Exit the Slide Show and exit ClearVue Presentation.
6. Plug in the backpack and open ClearVue Presentation
7. Open a Presentation file
8. Configure the External Video Adapter in ClearVue Presentation (do not open the mirror software)
9. Run a slide show
I tried the steps and the problem is still there.
Now I'm out of ways to get help and being in the Middle East, there's no way I can get my money back (no one protects consumers here).
Update to Back Pack Driver
After having denied that they had a problem with the dirver, Club i-mate have posted an update:
http://www.clubimate.com/Support/BackpackDriver.sa.CAB
They never bothered themseleves to reply to my emails, I found the update by chance.
If the above fix doesn't solve the back pack problem, try hard resetting. Hard reseting worked for me even without the updated driver.
When uograding to bigstorage for the first time the process can look daunting but fear not, even if, as mine did, it doesnt go as per the screen shots / directions it may still work. Mine did and with the following installed here is what i have ended up with.
SPV M500 / Magician with bigstorage
running are
intellidialier, voice id (extra from extended rom)
Installed are : --
Tomtom 5, Calligrapher, pocket breeze, pocket contact, avantgo, pocket music, and several other small aps not worth mentioning.
I the process went ok using my 1gb card until: ---
As the how-to says the rom size created relfects the size of your card so the rom i was working with was 1gb, I could not use the recommended hex editor with that file due to system resources, let me tell you when you are that far into the process and you cant open the rom it is very annoying. Thankfully there are several other hex editors out there that let you load files up to 4gb allowing for resources but unfortuntely neither my old xp laptop nor my media centre could still open it. I ended up using my powerbook G4 with HexEdit 1.1 which loaded the rom just fine for editing. All the rest went OK until the end of the flsh back to the phone where i got a failed message, after a soft reset it booted into the new rom with no problem.
I have to stress to you guys thinking about trying this, it IS worth it. I am so pleased with the results. After updating and setting up BT Activesync, mms, pop3 etc and with all aps running I have the following: -
Allocated 17.7MB Allocated: 29.70 MB
to use: 11.16MB to use : 14.75MB
Free: 6.55MB Free: 24.95MB
And that is in a running state with no restrictions.
Well done to the community for such good documentation and their desire to share information and allow us newbies to get the most out of these wonderful units.
Hello,
I hope I dont sound like an idiot, but what is a big storage rom?
I have heard it mentioned quite a few times in the forum. I have a Krome Spy ( analog of M500) from australia.
Thanks.
rohseq
Nice to know that you were successful in upgrading to BigStorage. I've done it since the very beginning. My next step would be "nonentity's" File System Tweak.
@rohsek: please search this forum and you will find the answers you need.
rohseq said:
Hello,
I hope I dont sound like an idiot, but what is a big storage rom?
I have heard it mentioned quite a few times in the forum. I have a Krome Spy ( analog of M500) from australia.
Thanks.
rohseq
Click to expand...
Click to collapse
With BIG Storage you convert your EXT-rom with operator brandings into extra internal Storage. You actually append about 20MB to the default 7MB Storage folder. Very nice hack.
Regards, M
COuld somebody tell me where I can find the HOW-TO described above??
Aren't there any standard ROMs?? It seems to me that when someone creates a specific ROM for a specific model, this ROM can be used in multiple devices or am I making you :lol: ROFLYAO :lol: by asking this question??
I've also got an Orange SPV M500 (with a huge memory shortage )...
Could someone please help me out??
Thanks in advance!!
Kind regards,
Maarten
Hi Maarten,
Still in English: visit this link for a complete description http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade. For an already patched nk.nbf you can download this one ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip
Success, M
Hi LVSW and all others specialist.
Please help me to select the right solution.
I am currently have O2 Neo Xda pda-phone. I am using it with English language, and it is working ok (a little bit slow, but ok).
My settings are:
IPL: 2.15.0001
SPL: 2.15.0001
OS: 2.15.13.27
(So, this is G4)
This is SIM Unlocked phone (I am not sure regarding CID unlock, I don't know how to check - should I do something about it at all?).
I would like to upgrade to faster ROM, but I would like to keep current languages and if possible to add Hebrew fonts (any ideas?).
Voice dialing that I have right now is another important features.
So, here are the questions (btw I tried to read different posts, but still not clear)
1. Should I choose 2.3 or 3.2? Cons/Pros - any risks?
2. Should I first downgrade to RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and for what if (at all)
3. If something going wrong, how I could could roll back? Should I prepare for this something in advance?
4. Extended ROM. Which one you suggest to pick (for both 2.3 or 3.2) and what is giving to me.
5. Should I apply RadioClock after all this? If yes which version.
I know that probably most of questions are already answered in different post, but please help me. I am a little bit afraid to do it, so confirmation and suggestion will be highly appreciated.
Tnx again
olegv24
Fantastic Boss, your Mobile & mine match 100%. But I still dont know if i should upgrde and how to. Hope we can help each other.
Hi guys,
I have a G3 but i really like to know how to perform an "right and safe upgrade solution". There is a wiki page that should help to prevent a lot of post like this.
The problem is that no one take care about it.
I have wrote a post with other questions like yours.
It is called:
"Missing important information on wiki page"
http://forum.xda-developers.com/showthread.php?t=283169
Could someone help us?
I propose to start to build it to prevent all post like this and help the new users (like me).
Some answers
Hello folks,
I had a similar setup to your's and went through the same hassle of going through the posts trying to decide what to upgrade to and how.
There are two different versions out there - one is AKU 3.2 and other is AKU 2.3. The only practical difference between them is that AKU 3.2 has built in support for new features like A2DP bluetooth stereo, Security features, etc which 2.3 lacks. My choice was to go with 3.2.
There are two versions of software ROMS floating around - one is by PDAMobiz and the other by Lvsw. PDAMobiz offers a ROM with many programs pre-installed inside such that you cannot delete/uninstall them. You use them or you don't. Lvsw uses the same PDAMobiz ROM (at times) and removes these programs. You have the choice (and the chore) of installing them yourselves.
My recommendation is to go with the PDAMobiz ROM if you're a newbie since it will give you a bunch of apps that are guaranteed to work with your phone and will give you some entertainment using them.
the update process has become very easy nowadays.
1) unplug your phone from the USB cable.
2) Click on Settings -> System -> Clear Storage
3) When it reboots, "tap on the screen to continue".
4) Don't align the screen - let it sit at that screen.
5) Plug in your USB cable.
6) When your computer's ActiveSync says new device found and asks if you want to synchronize it, hit Cancel.
7) This will install the PDA as a GUEST unit - i.e. just connection no syncing of contacts, etc.
8) Run the ROM program - For PDAMobiz Roms, you can double click the main EXE file and it will go ahead and do what it needs to. For other ROMS - click on the Batch file marked Upgrade ROM.bat and let it begin.
At the end of the upgrade process, you will find that the PDA remains at the align screen - screen and the DOS window on your computer will tell you to do a hard reset. That's basically - hold the camera button, hold the voice command button (below the volume slider - both buttons on left of unit) and have someone or something press the soft reset button at the base of the unit.
When it reboots - run through the screens as normal and you'll have an updated unit.
enjoy.
Thamizha
Hello!
We thank accepted in your forum, I hope to give my contribution me this community!
I am a neophyte of handhelds and I wanted to ask you a great help! ! ! !
I bought on ebay a ipaq hx2410 wm2003 engl, following a guide probably false (since the result) I tried to update my ipaq to wm6. Deploying the usual tools hp for the update of Rom, I used a Rom wm2003 and after the check version of this before taking further update, I replaced this with a rom containing wm6.
From logs seemed to have successfully completed the update, but the first hardware required by manual reset the palm is no longer party! ! ! !
Removing the battery and putting, running a Hardreset by starting the handheld this Pre-BL signs of life but ......
Linking the port usb pc sees this as a device unknown but .... Activesync and other tools as mtty fail to establish a connection.
So I decide to do a silly thing ..... I left all night in the handheld pre-bl found the next day completely devoid of life! ! ! !
Now I do not know what to do as well as battery will discharge also believe that buffer precisely because not even part pre-bl.
I have performed several Hardware Reset nothing but ...
I ask a big help! ! !
NB. I have only cradle that the knowledge of the battery charged via software and hence in this case can not work! ! !
We wondered if it regenerate, and whether you should ... Or alternatives because I already spent € 200.
Thank you for everything! ! !
Antonio Italy
it is not a problem if can read RUSSIAN
go on that link... http://xwarez.ru/forum/index.php?showtopic=6347
i was write FAQ how bring to a life your device
good luck
hEY
I think that Ipaq was not a phone... plus the rom you probably uploaded was not for that!
Try going to IPAQ original site! And they do support the device, so you can download the older rom HERE!
is there any hope that we can upgrade the ultimate 9502 to wm6.1 soon ????????
There is another thread on this a little further down, but so far i-Mate support is telling some people yes, and some people no - so I'm not sure.
so y cant some1 cook wm6.1 for imate 9502?
6.1 soon?
Signs of activity, or just wishful thinking?
http://preview.tinyurl.com/57sshv
Well we are trying to develop rom for imate 9502 but we are not getting enough support from the community. Check out the link in my signature and help the community in whatever way possible, so that we can build a working rom for the device.
This turned up in the Imate forums today. If anyone can translate from Polish it'd be great.
UniCom (Polish i-mate distributor) informed that i-mate confirmed OS update to WM 6.1 for 9502 and 8502.
The exact date will be announced soon.
Source:
http://www.gsmonline.pl/portal/news...M,Professional,6.1,w,smartfonach,marki,i-mate
Edit: Same link as above. Sorry.
samy.3660 said:
Well we are trying to develop rom for imate 9502 but we are not getting enough support from the community. Check out the link in my signature and help the community in whatever way possible, so that we can build a working rom for the device.
Click to expand...
Click to collapse
Hmmm. Perhaps that's because you've set up shop outside of the community? 9502 users are thin on the ground as it is, so why fragment that user base further by trying to divert them off to a lightly used forum? There's a wide audience of ROM experts here at xda-dev, so wouldn't it be more productive to share your ideas here? I have enough forums to check everyday as it is, so I don't really need another one with limited content and only a handful of users.
OK, the 9502 hasn't got its own section on xda-dev (and isn't likely to). But neither has the i780, and that hasn't stopped very successful collaboration and development for that device right here at the home of ROM cooking.
Ineedtoys said:
Signs of activity, or just wishful thinking?
http://preview.tinyurl.com/57sshv
Click to expand...
Click to collapse
Are we there yet?
Answer -NO STILL
So I personally doubt Imate will do it, I think its more likely they won't be around for long given the reports I read.
eg.
HTML:
http://msmobiles.com/news.php/7733.html
I think this is interesting!
"Sales for the six-month ended of September are estimated at $20.6 Million compared to $46.2 Million for the same time last year. This resulted in an estimated operating loss of $10.8 Million loss compared to $29.4 Million loss for the same time last year. Our cash position is at $11.2 Million and stock at $9.1 Million with debtors of $3.9 Million and creditors of $2.6 Million."
If I am reading this right it sounds like a good thing sales are about half because now the losses are only about 1/3. To me it's obvious why they are delisting and the customer support is legendary for all the wrong reasons.
Looks like we need to make our own ROM if my 9502 will work like its supposed to.
calibration code !
Originally Posted by corollatercel View Post
So i've been having problems with the screen alignment on mine since i had one spot on my MDA screen that was dead and my screen was cracked so the alignment wizard basically got stuck in limbo when I tried to calibrate it. SO basically what I had to do was download PHM Registry Editor and change the registry key touch referenced in here.
Afterwards I used the remote alignment tool (attached) to retrieve the correct settings from the correctly aligned mda(after changing the registry key then rebooting the device) then made sure the file was saved on my pc....normally it's saved by default in the C:\Program Files\Code Factory\Remote Screen Alignment directory. The file was called WIZA200.dat. I did a soft reset then when the alignment screen came up I did the skip function in the remote screen alignment application and it automatically read the proper calibration from the wiza200.dat file and then properly calibrated my mda now my screen is properly calibrated even though i never ran the alignment wizard.
So here are the Instructions folks:
1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.
4. Download the wiza200.txt file attached and rename it to WIZA200.dat then put it in the C:\Program Files\Code Factory\Remote Screen Alignment directory on your computer
5. Ensure your MDA is connected to your pc(A green activesync Icon usually indicates a connection )
6. Open the remote screen alignment tool on your pc meanwhile your phone be displaying the alignment screen wizard.
7. Click SKIP in the screen alignment tool.
Assuming everything went fine a message box displaying "The operation has been completed successfully. Your device will be restarted." should pop up on your computer and your device should restart. Afterwards your phone will run the files it always does when you do a soft/hard reset then you touch screen should be properly calibrated and work fine.
thanks in adv !