Hello, is there an Crossbow that works 100% on the Prophet? And wath is the risk of installing it on your Prophet?
Sorry for not posting this in the earlier post, but it was pretty full
And how can I find out if I got a G3 or G4 phone? And what is the differnce?
Qtek_S200 said:
And how can I find out if I got a G3 or G4 phone? And what is the differnce?
Click to expand...
Click to collapse
did you already read the wiki?
I have found out that I got a G3. Any Crossbow to this? That works? And is on English?
IPL: 2.10
SPL: 2.10.0000
Is this a G3?
Yes it is G3... There's no WM6 ROM I consider "usable" in my terms... They just have too many problems...
Next time post your WM6 doubts in the WM6 thread... That's why it was created... To avoid threads with same subject growing up like mushrooms...
Okey.. Sorry
Related
Hello,'ve got a Qtek S200
IPL: 2.10
SPL:2.10.0000
Is this a G3 or G4 Phone?
And were is there a WM6 ROM that works. And can someone give me instruction? I am not very good on this
Thanks!
Just search dude!
and read Wiki before ask questions that people have already answer 1000x
You're right mccune and John-Wu.
Forum is already in chaos.
Is it possible to delete such stupid threads?
Moderators can do this....I think.
Give him a break folks!
@Qtek_S200,
According to your data it's a G3 device... I'm using Nghiangas Rom without much issues.
And please, use the WiKi and the Search function next time alright?
Peace!
RayanMX vbmenu_register("postmenu_1147575",
I read the top post but I have a qestion. The WM6 Rom above whether suits for G3 and G4? or just for G3 only. thanks.
arpaul said:
I read the top post but I have a qestion. The WM6 Rom above whether suits for G3 and G4? or just for G3 only. thanks.
Click to expand...
Click to collapse
Most of the ROMs (WM6) are suitable for both, as they contain only the OS. For example Gullum V6 or PDAViet 4.0.0.0.6 are suitable for both G3 and G4.
thanks I will try the PV 4.0.0.6
This is what my PDA shows at start up:
IPL:2.09
SPL:2.09.0000
GSM: 02.07.20
OS: 2.9.7.24
Is it a G3 or G4 device? In the wiki it says that when SPL finishes in 000 is G3 and when it finishes in 0001 is a G4 device. But mine finishes in 0000! So, it's G3 or G4?
Thanks,
Daniel
Same question here I have a Qtek S200 as well.
I would say G3 but wait for others to reply. Look at my specs 2.09.0001 and it is a G4.
read the wiki guys...
the wiki is there to answer these questions...
here's the link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
the answers are there.....
The wiki does not answer this question! You probably not even read my question, cause in the question I said the wiki doesn´t answer my doubt! So if you could help me I appreciate...
same here..mine has .0000 and i dont know if its G3 or G4..been looking for answers but...
danielivo said:
The wiki does not answer this question! You probably not even read my question, cause in the question I said the wiki doesn´t answer my doubt! So if you could help me I appreciate...
Click to expand...
Click to collapse
It's in the wiki after all..hehe
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Now I know that it's a G3, cause until now some peaple was saying it's a G3 and some it's a G4.... hehe
They have updated the wiki today...
danielivo said:
They have updated the wiki today...
Click to expand...
Click to collapse
right that was me.
seemed like a good idea at the time...
now I am not too sure
still say it's G3
but I have now removed this information as a precaution, until I get confirmation.
I have 2.10.0000 spl and had been advised to use G3 utility
I have used many without problems
Now on the Wizard thread I read the following:
G3 DEVICE: IPL/SPL: 1.XX or 2.XX or 2.XX.00X (only two zeros)
G4 DEVICE: IPL/SPL: 2.XX.000X(three zeros)
_Nomad_ said:
The only visible difference between a G3 and a G4 device is when you soft reset your device and looking at the IPL and SPL version numbers that occur during startup.
G3 DEVICE: IPL/SPL: 1.XX or 2.XX or 2.XX.00X (only two zeros)
G4 DEVICE: IPL/SPL: 2.XX.000X(three zeros)
Note, X is representing a number.
So, how do you go about to CID-unlock your device? First, do you really have to? Well, in one word YES!, in order to install most of the custom-made ROMs from this site you have to have a device that is CID-unlocked...
If you have a G3 device the solution is pretty straightforward. just look here...
If you have a G4 device you have to go to imei-check.co.uk and pay £20 in order to get it unlocked. But you can help develop a solution that doen't require you to pay for it. Have a look at this thread.
NOTE: There are several posts that mention this subject, some claim that using the imei-check.co.uk method will not CID-unlock your device but only unlock the SIM. THIS IS NOT CORRECT! Your G4 device will be unlocked after this procedure.
Finally, never, ever, flash your G4 device with a ROM that is intended for a G3 device, make sure that is either made for G4 or doesn't contain a bootloader. If you for some reason you do, you'll have damaged (bricked) your Wizard permanently...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1061880#post1061880
so... for the Prophet? can someone clear this up once and for all? Mods?
So... The question remains: "SPL:2.09.0000 it's G3 or G4?"
I want to CID unlock my S200, but I'm afraid since I don't know for sure if it's G3 or G4...
danielivo said:
So... The question remains: "SPL:2.09.0000 it's G3 or G4?"
I want to CID unlock my S200, but I'm afraid since I don't know for sure if it's G3 or G4...
Click to expand...
Click to collapse
Your S200 is G4!!!
SPL:2.09.0000 = 2.09.0000
2.XX.000X (Three Zeros) G4!!!
I have a locked tmobile mda... I forget what I need to do b4 I can flash a new rom... I think all I have to do is CID unlock it right? But I forget how. Any help would be great
why not to read "sticky" threads on the top!!!
cgigate said:
why not to read "sticky" threads on the top!!!
Click to expand...
Click to collapse
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
help wanted
dharvey4651 said:
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
Click to expand...
Click to collapse
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
read the stickies...
especially
How to flash a new ROM to your Wizard... a little tutorial!
VWGolf2.OHH said:
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
Click to expand...
Click to collapse
Which is your device, a G3 or G4,how come we can tell,untill and unless you do not post the vital data of your phone,no one can suggest you any help without knowing the version of your phone.always post the data.
Well 'trustworthy post on how to upload WM6 on my MDA?',why ?,do you think what all is posted here in this Forum is not Trustworthy.
Very rightly said by moseslin 'Read The Stickies',you'll find all the answers here, just "Help Yourself"
bill4676 said:
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
Click to expand...
Click to collapse
which DOC chip version you got,a G3 or G4 ? to verify post your IPL/SPL...? or download the WST Tool,install and run it and post the report to determine if it's a G3 or G4 device.You can download the WST tool here :-
http://forum.xda-developers.com/showthread.php?t=329170
If it's a G3,it's required to first CID unlock the device and than upgrade to wm6.
How to CID unlock,check this guide here :-
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=263116
But if a G4,read here how to upgrade :-
http://forum.xda-developers.com/showthread.php?t=329147
Good luck
Hi, im looking for a safe wizard G4 rom. I tink TNT is the best one
TNT.1933 Series (Vanilla/Official/Professional/TouchFLO)
I saw this thread!! GREAT!!
But is this rom reay G4 safe.
General Notes:
-There is no IPL, SPL, ... JUST OS and splashes, so i think its safe for G4 users.
so i think its safe for G4 users. But i need to know for sure...
Thnx!
Add
http://forum.xda-developers.com/showthread.php?t=341550
U R RIGHT
kevinleech said:
Hi, im looking for a safe wizard G4 rom. I tink TNT is the best one
TNT.1933 Series (Vanilla/Official/Professional/TouchFLO)
I saw this thread!! GREAT!!
But is this rom reay G4 safe.
General Notes:
-There is no IPL, SPL, ... JUST OS and splashes, so i think its safe for G4 users.
so i think its safe for G4 users. But i need to know for sure...
Thnx!
Click to expand...
Click to collapse
Yes Bro, It is SAFE
just flashed it to my old wizard (G4) yesterday....works just fine