Hi,
I need to know how to configure the COM5 of an XdaII for the BT GPS Leadtek9553. Only let me COM7 as a port free, and doesn't work.
Please Help me!!!
Anyone with these problems?
Miwell
Leadtek
Hi there, it should work like this:
Com port: 7
Baud Rate: 57600
Protocol: NMEA
These are my settings, using Destinator3. and Leadtek Bluetooth.
Keep me posted, if it does not work I will send you a program that adds services to your bluetooth.
GPS Connection
I have successfully operated Navman SmartST navigation system on my XDA II. The problem is that I am now trying to reinstall it & the drop down Com port options list only Com ports 1, 2, 3, 6, 8 & 9. Coms 4 & 7, which I need, used to be there but have disappeared. I have tried a hard boot but to no avail. Any ideas?
Hello,
I am trying to activate the GPS settings off my tomtom navigator 3 on my Qtek 9090. I keep getting an error that the COM1 port does not exist. Can anyone help me?
turn off recieve all beams
in connections
Thanks, I was looking for this one.
I've just recieved a HTC Himalaya which was running WM2003 coupled with an external NAVMAN "ONE" Bluetooth GPS unit. Everything works fine when running WM2003, the GPS is set up and is set to (COM7) by default and registers in the TT6 GPS config fine.
After flashing to WM2005 using the "Hima Helmi WM5 SP3 (XOJ Edition)" located here, the NAVMAN will pair to the GPS as usual, but won't have a COM port automatically selected. After selecting an outgoing port (I think COM0,4,5,9 work without giving an error about being unable to create) and leaving the manage gps connection automatically checked, setting the baud rate, etc, I set the intermediate GPS port that WM2005 suggests to COM6.
After starting TOMTOM6 from SD-card, and setting up the GPS config to the right baud on "BT on COM6", the GPS will not connect with the Himalaya.
The same happens on WM2006.
Has anyone had a similar problem?
This is the closest link i could find:
http://forum.xda-developers.com/showthread.php?t=238883
Help much appreciated!
Basically, When running on WM2005 or WM2006, the bluetooth com-port will not appear in TT6.
It all works fine on WM2003.
Any ideas?
hello and happy new year to all!!!!
i have tried all wwe roms from wwe 03 up till present wwe 05 rom which im currently using on my htc magician device.i keep trying everyone of these roms in hope to get tomtom 7 up and running.i cant get my external gps devise to be seen by tomtom i get as far as pairing via bluetooth i have gpsgate and also gps proxy gps2blue also tried gps test version 1.04 which scanns ports but still does not find my gps! my gps devise is bt 541 holox which working fine with nokia n95 but due to tomtom mobile maps being up to date. i would be gratefull if some one might help me step by step manythanks
Hi Mr Joe,
I've tried to use Tomtom 7 with wwe 03 and same problem.
The only way to use it that i've found is to download GPS proxy on this site :
http://sourceforge.net/projects/gpsproxy/
You had to add a outgoing port in your GPS BTH (port 6 by exemple)
With gps proxi , you've to create a virtual port 4 (automatically) and via the option, configure entry port 6 and outgoing port n° 4.
with tomtom, u choose port 4 for you GPS and it's works.
hi thank you for your swift reply
i tried as mentioned above and gps proxy says
the nmea input provider failed to start creatfile failed 55
lol still pulling hair out i must have spent about 60 hours searching forums and diffrent apps
after uninstalling gps proxy i reinstalled gps proxy to find error on screen saying i needed opennetcf.sdf.ppc.arm.cab im still searching for this file lol
every time i try install gps proxy it say you need blah blah file befor it will work i keep downloading these diffrent files and installing them then keep uninstalling gpsproxy 2.2. then again and again .......... im so frustrated all i want is tomtom 7 up and running with my gps device. is there anybody who has wwE 05 FOR 64MB DEVICE who has not had to spend approx 65 hours trying diffrent roms diffrent apps to get tomtom 7 working?????????????????anyone know what other files are needed in wwe 05 64 mb device to run gpsproxy????????????? anyone have a list or even a simply way?
OK I FOUND FILES HERE http://sourceforge.net/projects/gps...6/GPSProxy-1.6-ARMV4-NoInstaller.zip/download
I INSTALLED BUT I KEEP GETTING
THE NMEA IMPUT PROVIDER FAILED TO START: CREATFILE FAILED :55
ANYBODY ANY IDEAS?
STARTING TO THINK AM I JUST BEST TO INSTALL WM 2003
How can i close posts?
i tried this with gps proxy....
i have a bluetooth gps mouse from nokia...
model: ld 1w
I pair my magician with the mouse.....after that i set the gps mouse to comport 6.
Now i run gpsproxy and setup my device:
i add Virtual port com4
in nmea i use for incoming port 6
then i set outgoing port to port 4...
the i push start...
then come "fix typ: invalid"
any idea??
i found 'igo8' to work best on magician.
i use a blue-tooth gps, use standard gps port with the rom, done. no issues and quick.
i can still use my bluetooth car hands free at same time too.
(wwe rom 3.06)
I too have problems with my external GPS (sold under T-Mobile NaviGate Bluekit III mouse, but it's Leadtek under the hood) under WWE_O5 , but I think it's more related to the Bluetooth stack
here's what I did
-> add new device
-> Leadtek Bluetooth GPS shows up, next
-> Passcode is prompted, 0000, next
-> Device added, your pocket PC has connected with Bluetooth GPS
everything is fine up till this point, now the GPS shows up under "disconnected"
Now when I single tap it to turn on Serial Port, save and connect it say
CAnnot connect, your device did not connect With Leadtek Bluetooth GPS. The connection failed or the passcode is incorrect
I'm pretty sure it's not the GPS itself since it ran fine with the vanilla firmware
This is pretty much the only thing that keeps me from fully enjoying the rom, though
Hello
I'm in the same situation as you. I have tried a large number of settings to get TonTom/ to connect to my BT GPS ( I've tried Holux 236slim firmware 3.1.0, Holux236slim Firmware 3.1.1, Holux1000B). None of them are identified by TomTom. I have also tested a handfull of other GPS applications without any problems, they are running perfect. I,ve resetted all GPS's to factory basis, I've modified baudrates, S/N and so on without sucess. tested with and w/O WM "external GPS"-program. The "external GPS" does anyhow transfer the correct comport to Tomtom.
No sucess. No sucess.
By trying the other GPS alternativs inside Tomtom gps-configuration, I've ben able to for a second been capable to get the GPS signal.
-Something is wrong inside WM6.5 , S100 or Tomtom.
P-O
Edit
After first removing all setting for BT then removing the main battey, getting low capacity in back up battery, reinstalling BT-GPS ( Holux m1000b) i've got the Tontom to connect to the GPS. I've used the port (in Tomtom GPS konfiguration) given by the BT-setting, com 7 in my case. It failed when chozing the port given by the "external GPS#
The installation is not stable. after shutting down the S100 and restarted. It failed and I had to remove main battery again. Now its working.
I do not dare to test with another GPS yet.
P-O
Second edit
I have sucessfully connected all my GPS decvices. Anyhow the connection to Tomtom is more unstable on the magician then on my other phones (Wizard and Herald with WM6.1). Unstable in my case means: loss of connection, have to reinstall GP-device and reboot. Anyhow. I have beiing driving 400 km today without any problems.
P-O
Heyy Guys,
I have a Uni running Tomal's V12 WM6.5
i want to rn tomtom 6 navigator.. But cant get me Holux to connect any help?